Produkte > ELESA+GANTER > Alle Produkte des Herstellers ELESA+GANTER (879) > Seite 14 nach 15
| Foto | Bezeichnung | Hersteller | Beschreibung |
Verfügbarkeit |
Preis |
||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| GN 55.4-ND-7,5-4-1,5 | ELESA+GANTER |
Permanent magnet; neodymium; height 3mm; width; 7,5mm, length: 10mm, 7.5N, steel GN 55.4-ND-7,5-4-1,5 Elesa+Ganter M GN 55.4-ND-7,5-4-1,5 Anzahl je Verpackung: 5 Stücke |
auf Bestellung 10 Stücke: Lieferzeit 7-14 Tag (e) |
|
|||||||
| GN7045.2-M3-12-NI | ELESA+GANTER |
 Category: BoltsDescription: Screw; with recessed stud; M3x12; 0.5; Head: cheese head; Phillips Thread: M3 Head height: 2mm Cut size: PH2 Plunger diameter: 2.2mm Thread length: 4mm Head diameter: 5.5mm Length: 12mm Thread pitch: 0.5 Material: stainless steel Kind of head: cheese head Kind of cut: Phillips Version: with recessed stud Type of mounting element: screw |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | |||||||
| GN754-10-20-M10-KL-ST | ELESA+GANTER |
Category: Joints Description: Fork joint; Øhole: 10mm; M10; right hand thread,outside; steel Type of mounting element: fork joint Manufacturer series: GN 754 Thread: M10 Kind of thread: outside; right hand thread Material: steel Version: with pin Plating material: zinc Hole diameter: 10mm Width: 20mm Length: 69mm |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | |||||||
| GN754-12-24-M12-KL-ST | ELESA+GANTER |
Category: Joints Description: Fork joint; Øhole: 12mm; M12; right hand thread,outside; steel Type of mounting element: fork joint Manufacturer series: GN 754 Thread: M12 Kind of thread: outside; right hand thread Material: steel Version: with pin Plating material: zinc Hole diameter: 12mm Width: 24mm Length: 82mm |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | |||||||
| GN754-14-28-M14-KL-ST | ELESA+GANTER |
Category: Joints Description: Fork joint; Øhole: 14mm; M14; right hand thread,outside; steel Type of mounting element: fork joint Manufacturer series: GN 754 Thread: M14 Kind of thread: outside; right hand thread Material: steel Version: with pin Plating material: zinc Hole diameter: 14mm Width: 27mm Length: 94mm |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | |||||||
| GN754-16-32-M16-KL-ST | ELESA+GANTER |
Category: Joints Description: Fork joint; Øhole: 16mm; M16; right hand thread,outside; steel Type of mounting element: fork joint Manufacturer series: GN 754 Thread: M16 Kind of thread: outside; right hand thread Material: steel Version: with pin Plating material: zinc Hole diameter: 16mm Width: 32mm Length: 108mm |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | |||||||
| GN754-6-12-M6-KL-ST | ELESA+GANTER |
Category: Joints Description: Fork joint; Øhole: 6mm; M6; right hand thread,outside; steel Type of mounting element: fork joint Manufacturer series: GN 754 Thread: M6 Kind of thread: outside; right hand thread Material: steel Version: with pin Plating material: zinc Hole diameter: 6mm Width: 12mm Length: 44mm |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | |||||||
| GN754-8-16-M8-KL-ST | ELESA+GANTER |
Category: Joints Description: Fork joint; Øhole: 8mm; M8; right hand thread,outside; steel Type of mounting element: fork joint Manufacturer series: GN 754 Thread: M8 Kind of thread: outside; right hand thread Material: steel Version: with pin Plating material: zinc Hole diameter: 8mm Width: 16mm Length: 57mm |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | |||||||
 |
GN7984.3-M3-10-BT | ELESA+GANTER |
Category: Bolts Description: Screw; M3x10; 0.5; Head: cheese head; hex key; HEX 2mm; steel Type of mounting element: screw Thread: M3 Thread pitch: 0.5 Length: 10mm Kind of head: cheese head Kind of cut: hex key Cut size: HEX 2mm Material: steel Plating material: black finish; oxidized Head height: 2mm Head diameter: 4.5mm ISO standard: ISO 898-1 |
auf Bestellung 6 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
| GN8341-40-M4-MT-F | ELESA+GANTER |
Category: Knobs Description: Knob wing; Int.thread: M4; 8mm; H: 22mm; stainless steel; W: 40mm Manufacturer series: GN 8341 Body material: stainless steel Type of mounting element: knob wing Gasket material: FKM Internal thread: M4 Body colour: natural Thread length: 8mm Height: 22mm Width: 40mm |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | |||||||
| GN8341-40-M4-PL-F | ELESA+GANTER |
Category: Knobs Description: Knob wing; Int.thread: M4; 8mm; H: 22mm; stainless steel; W: 40mm Manufacturer series: GN 8341 Body material: stainless steel Type of mounting element: knob wing Gasket material: FKM Internal thread: M4 Body colour: natural Thread length: 8mm Height: 22mm Width: 40mm |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | |||||||
| GN8341-50-M5-MT-F | ELESA+GANTER |
Category: Knobs Description: Knob wing; Int.thread: M5; 10mm; H: 28mm; stainless steel; W: 50mm Manufacturer series: GN 8341 Body material: stainless steel Type of mounting element: knob wing Gasket material: FKM Internal thread: M5 Body colour: natural Thread length: 10mm Height: 28mm Width: 50mm |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | |||||||
| GN8341-50-M5-PL-F | ELESA+GANTER |
Category: Knobs Description: Knob wing; Int.thread: M5; 10mm; H: 28mm; stainless steel; W: 50mm Manufacturer series: GN 8341 Body material: stainless steel Type of mounting element: knob wing Gasket material: FKM Internal thread: M5 Body colour: natural Thread length: 10mm Height: 28mm Width: 50mm |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | |||||||
| GN8341-63-M6-MT-F | ELESA+GANTER |
Category: Knobs Description: Knob wing; Int.thread: M6; 12mm; H: 35mm; stainless steel; W: 63mm Manufacturer series: GN 8341 Body material: stainless steel Type of mounting element: knob wing Gasket material: FKM Internal thread: M6 Body colour: natural Thread length: 12mm Height: 35mm Width: 63mm |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | |||||||
| GN8341-63-M6-PL-F | ELESA+GANTER |
Category: Knobs Description: Knob wing; Int.thread: M6; 12mm; H: 35mm; stainless steel; W: 63mm Manufacturer series: GN 8341 Body material: stainless steel Type of mounting element: knob wing Gasket material: FKM Internal thread: M6 Body colour: natural Thread length: 12mm Height: 35mm Width: 63mm |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | |||||||
 |
GN912.3-M3-12-NI | ELESA+GANTER |
Category: Bolts Description: Screw; M3x12; 0.5; Head: cheese head; hex key; HEX 2.5mm Thread: M3 Head height: 3mm Cut size: HEX 2.5mm Head diameter: 4.5mm Length: 12mm Thread pitch: 0.5 Material: stainless steel Kind of head: cheese head Kind of cut: hex key Type of mounting element: screw |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||
 |
GN990-AL-D12-1000-EL | ELESA+GANTER |
Category: Aluminium Profiles Description: Connecting tubes; D: 12mm; L: 1m; aluminium; oval Type of mounting element: connecting tubes D dimension: 12mm Length: 1m Material: aluminium Kind of profile: oval |
auf Bestellung 6 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
HCL-400-M12 | ELESA+GANTER |
Category: Level Indicators Description: Column level indicator; M12; Ømount.hole: 400mm Thread: M12 Overall length: 426mm Type of mounting element: column level indicator Panel cutout diameter: 400mm Body material: technopolymer PA |
auf Bestellung 3 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
I.701/20+X-M4 | ELESA+GANTER |
Category: Knobs Description: Handle; Ø: 13.5mm; Ext.thread: M4; 8mm; L: 20mm; twistable Diameter: 13.5mm Type of mounting element: handle External thread: M4 Version: twistable Thread length: 8mm Length: 20mm |
auf Bestellung 1 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
ISO 7379-10-M8-16 | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm Plating material: black finish Kind of head: cheese head; knurled Kind of cut: hex key ISO standard: ISO 7379 Thread: M8 Type of mounting element: shoulder screw Cut size: HEX 5mm Head height: 7mm Plunger diameter: 10mm Thread length: 13mm Plunger length: 16mm Head diameter: 16mm Thread pitch: 1.25 Strength class: 12.9 Material: steel |
auf Bestellung 37 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
|
|
ISO 7379-10-M8-16-NI | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; A2 stainless steel; M8; 1.25; Thread len: 13mm Type of mounting element: shoulder screw Material: A2 stainless steel Thread: M8 Thread pitch: 1.25 Thread length: 13mm Kind of head: cheese head; knurled Kind of cut: hex key Cut size: HEX 5mm Head height: 7mm Head diameter: 16mm ISO standard: ISO 7379 Plunger length: 16mm Plunger diameter: 10mm |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||
 |
ISO 7379-10-M8-20 | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm Plating material: black finish Kind of head: cheese head; knurled Kind of cut: hex key ISO standard: ISO 7379 Thread: M8 Type of mounting element: shoulder screw Cut size: HEX 5mm Head height: 7mm Plunger diameter: 10mm Thread length: 13mm Plunger length: 20mm Head diameter: 16mm Thread pitch: 1.25 Strength class: 12.9 Material: steel |
auf Bestellung 6 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
ISO 7379-10-M8-25 | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm Plating material: black finish Kind of head: cheese head; knurled Kind of cut: hex key ISO standard: ISO 7379 Thread: M8 Type of mounting element: shoulder screw Cut size: HEX 5mm Head height: 7mm Plunger diameter: 10mm Thread length: 13mm Plunger length: 25mm Head diameter: 16mm Thread pitch: 1.25 Strength class: 12.9 Material: steel |
auf Bestellung 31 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
|
|
ISO 7379-10-M8-25-NI | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; A2 stainless steel; M8; 1.25; Thread len: 13mm Type of mounting element: shoulder screw Material: A2 stainless steel Thread: M8 Thread pitch: 1.25 Thread length: 13mm Kind of head: cheese head; knurled Kind of cut: hex key Cut size: HEX 5mm Head height: 7mm Head diameter: 16mm ISO standard: ISO 7379 Plunger length: 25mm Plunger diameter: 10mm |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||
 |
ISO 7379-10-M8-35 | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm Plating material: black finish Kind of head: cheese head; knurled Kind of cut: hex key ISO standard: ISO 7379 Thread: M8 Type of mounting element: shoulder screw Cut size: HEX 5mm Head height: 7mm Plunger diameter: 10mm Thread length: 13mm Plunger length: 35mm Head diameter: 16mm Thread pitch: 1.25 Strength class: 12.9 Material: steel |
auf Bestellung 25 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
ISO 7379-10-M8-40 | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm Plating material: black finish Kind of head: cheese head; knurled Kind of cut: hex key ISO standard: ISO 7379 Thread: M8 Type of mounting element: shoulder screw Cut size: HEX 5mm Head height: 7mm Plunger diameter: 10mm Thread length: 13mm Plunger length: 40mm Head diameter: 16mm Thread pitch: 1.25 Strength class: 12.9 Material: steel |
auf Bestellung 99 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
ISO 7379-10-M8-45 | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm Plating material: black finish Kind of head: cheese head; knurled Kind of cut: hex key ISO standard: ISO 7379 Thread: M8 Type of mounting element: shoulder screw Cut size: HEX 5mm Head height: 7mm Plunger diameter: 10mm Thread length: 13mm Plunger length: 45mm Head diameter: 16mm Thread pitch: 1.25 Strength class: 12.9 Material: steel |
auf Bestellung 8 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
ISO 7379-10-M8-50 | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm Plating material: black finish Kind of head: cheese head; knurled Kind of cut: hex key ISO standard: ISO 7379 Thread: M8 Type of mounting element: shoulder screw Cut size: HEX 5mm Head height: 7mm Plunger diameter: 10mm Thread length: 13mm Plunger length: 50mm Head diameter: 16mm Thread pitch: 1.25 Strength class: 12.9 Material: steel |
auf Bestellung 15 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
ISO 7379-10-M8-60 | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm Plating material: black finish Kind of head: cheese head; knurled Kind of cut: hex key ISO standard: ISO 7379 Thread: M8 Type of mounting element: shoulder screw Cut size: HEX 5mm Head height: 7mm Plunger diameter: 10mm Thread length: 13mm Plunger length: 60mm Head diameter: 16mm Thread pitch: 1.25 Strength class: 12.9 Material: steel |
auf Bestellung 17 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
|
|
ISO 7379-10-M8-60-NI | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; A2 stainless steel; M8; 1.25; Thread len: 13mm Type of mounting element: shoulder screw Material: A2 stainless steel Thread: M8 Thread pitch: 1.25 Thread length: 13mm Kind of head: cheese head; knurled Kind of cut: hex key Cut size: HEX 5mm Head height: 7mm Head diameter: 16mm ISO standard: ISO 7379 Plunger length: 60mm Plunger diameter: 10mm |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||
 |
ISO 7379-10-M8-80 | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm Plating material: black finish Kind of head: cheese head; knurled Kind of cut: hex key ISO standard: ISO 7379 Thread: M8 Type of mounting element: shoulder screw Cut size: HEX 5mm Head height: 7mm Plunger diameter: 10mm Thread length: 13mm Plunger length: 80mm Head diameter: 16mm Thread pitch: 1.25 Strength class: 12.9 Material: steel |
auf Bestellung 11 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
ISO 7379-10-M8-90 | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm Plating material: black finish Kind of head: cheese head; knurled Kind of cut: hex key ISO standard: ISO 7379 Thread: M8 Type of mounting element: shoulder screw Cut size: HEX 5mm Head height: 7mm Plunger diameter: 10mm Thread length: 13mm Plunger length: 90mm Head diameter: 16mm Thread pitch: 1.25 Strength class: 12.9 Material: steel |
auf Bestellung 9 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
ISO 7379-12-M10-16 | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; steel; M10; 1.5; Thread len: 16mm; hex key; HEX 6mm Plating material: black finish Kind of head: cheese head; knurled Kind of cut: hex key ISO standard: ISO 7379 Thread: M10 Type of mounting element: shoulder screw Cut size: HEX 6mm Head height: 8mm Plunger diameter: 12mm Thread length: 16mm Plunger length: 16mm Head diameter: 18mm Thread pitch: 1.5 Strength class: 12.9 Material: steel |
auf Bestellung 13 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
|
|
ISO 7379-12-M10-16-NI | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; A2 stainless steel; M10; 1.5; Thread len: 16mm Kind of head: cheese head; knurled Kind of cut: hex key ISO standard: ISO 7379 Thread: M10 Type of mounting element: shoulder screw Cut size: HEX 6mm Head height: 8mm Plunger diameter: 12mm Thread length: 16mm Plunger length: 16mm Head diameter: 18mm Thread pitch: 1.5 Material: A2 stainless steel |
auf Bestellung 1 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
ISO 7379-12-M10-20 | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; steel; M10; 1.5; Thread len: 16mm; hex key; HEX 6mm Plating material: black finish Kind of head: cheese head; knurled Kind of cut: hex key ISO standard: ISO 7379 Thread: M10 Type of mounting element: shoulder screw Cut size: HEX 6mm Head height: 8mm Plunger diameter: 12mm Thread length: 16mm Plunger length: 20mm Head diameter: 18mm Thread pitch: 1.5 Strength class: 12.9 Material: steel |
auf Bestellung 27 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
ISO 7379-12-M10-25 | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; steel; M10; 1.5; Thread len: 16mm; hex key; HEX 6mm Plating material: black finish Kind of head: cheese head; knurled Kind of cut: hex key ISO standard: ISO 7379 Thread: M10 Type of mounting element: shoulder screw Cut size: HEX 6mm Head height: 8mm Plunger diameter: 12mm Thread length: 16mm Plunger length: 25mm Head diameter: 18mm Thread pitch: 1.5 Strength class: 12.9 Material: steel |
auf Bestellung 40 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
ISO 7379-12-M10-30 | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; steel; M10; 1.5; Thread len: 16mm; hex key; HEX 6mm Plating material: black finish Kind of head: cheese head; knurled Kind of cut: hex key ISO standard: ISO 7379 Thread: M10 Type of mounting element: shoulder screw Cut size: HEX 6mm Head height: 8mm Plunger diameter: 12mm Thread length: 16mm Plunger length: 30mm Head diameter: 18mm Thread pitch: 1.5 Strength class: 12.9 Material: steel |
auf Bestellung 1 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
ISO 7379-12-M10-35 | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; steel; M10; 1.5; Thread len: 16mm; hex key; HEX 6mm Plating material: black finish Kind of head: cheese head; knurled Kind of cut: hex key ISO standard: ISO 7379 Thread: M10 Type of mounting element: shoulder screw Cut size: HEX 6mm Head height: 8mm Plunger diameter: 12mm Thread length: 16mm Plunger length: 35mm Head diameter: 18mm Thread pitch: 1.5 Strength class: 12.9 Material: steel |
auf Bestellung 15 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
ISO 7379-12-M10-40 | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; steel; M10; 1.5; Thread len: 16mm; hex key; HEX 6mm Plating material: black finish Kind of head: cheese head; knurled Kind of cut: hex key ISO standard: ISO 7379 Thread: M10 Type of mounting element: shoulder screw Cut size: HEX 6mm Head height: 8mm Plunger diameter: 12mm Thread length: 16mm Plunger length: 40mm Head diameter: 18mm Thread pitch: 1.5 Strength class: 12.9 Material: steel |
auf Bestellung 7 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
|
|
ISO 7379-12-M10-50-NI | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; A2 stainless steel; M10; 1.5; Thread len: 16mm Kind of head: cheese head; knurled Kind of cut: hex key ISO standard: ISO 7379 Thread: M10 Type of mounting element: shoulder screw Cut size: HEX 6mm Head height: 8mm Plunger diameter: 12mm Thread length: 16mm Plunger length: 50mm Head diameter: 18mm Thread pitch: 1.5 Material: A2 stainless steel |
auf Bestellung 1 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
|
|
ISO 7379-12-M10-60 | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; steel; M10; 1.5; Thread len: 16mm; hex key; HEX 6mm Plating material: black finish Kind of head: cheese head; knurled Kind of cut: hex key ISO standard: ISO 7379 Thread: M10 Type of mounting element: shoulder screw Cut size: HEX 6mm Head height: 8mm Plunger diameter: 12mm Thread length: 16mm Plunger length: 60mm Head diameter: 18mm Thread pitch: 1.5 Strength class: 12.9 Material: steel |
auf Bestellung 5 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
|
|
ISO 7379-12-M10-60-NI | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; A2 stainless steel; M10; 1.5; Thread len: 16mm Type of mounting element: shoulder screw Material: A2 stainless steel Thread: M10 Thread pitch: 1.5 Thread length: 16mm Kind of head: cheese head; knurled Kind of cut: hex key Cut size: HEX 6mm Head height: 8mm Head diameter: 18mm ISO standard: ISO 7379 Plunger length: 60mm Plunger diameter: 12mm |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||
|
|
ISO 7379-12-M10-90 | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; steel; M10; 1.5; Thread len: 16mm; hex key; HEX 6mm Plating material: black finish Kind of head: cheese head; knurled Kind of cut: hex key ISO standard: ISO 7379 Thread: M10 Type of mounting element: shoulder screw Cut size: HEX 6mm Head height: 8mm Plunger diameter: 12mm Thread length: 16mm Plunger length: 90mm Head diameter: 18mm Thread pitch: 1.5 Strength class: 12.9 Material: steel |
auf Bestellung 1 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
|
|
ISO 7379-16-M12-100 | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; steel; M12; 1.75; Thread len: 18mm; hex key; Ø: 16mm Plating material: black finish Kind of head: cheese head; knurled Type of mounting element: shoulder screw Kind of cut: hex key ISO standard: ISO 7379 Thread: M12 Cut size: HEX 8mm Head height: 11mm Plunger diameter: 16mm Thread length: 18mm Head diameter: 24mm Plunger length: 100mm Strength class: 12.9 Thread pitch: 1.75 Material: steel |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||
|
|
ISO 7379-16-M12-100-NI | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; A2 stainless steel; M12; 1.75; Thread len: 18mm Kind of head: cheese head; knurled Type of mounting element: shoulder screw Kind of cut: hex key ISO standard: ISO 7379 Thread: M12 Cut size: HEX 8mm Head height: 11mm Plunger diameter: 16mm Thread length: 18mm Head diameter: 24mm Plunger length: 100mm Thread pitch: 1.75 Material: A2 stainless steel |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||
|
|
ISO 7379-16-M12-90 | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; steel; M12; 1.75; Thread len: 18mm; hex key; Ø: 16mm Type of mounting element: shoulder screw Material: steel Thread: M12 Thread pitch: 1.75 Thread length: 18mm Kind of head: cheese head; knurled Kind of cut: hex key Cut size: HEX 8mm Head height: 11mm Head diameter: 24mm ISO standard: ISO 7379 Plunger length: 90mm Plunger diameter: 16mm Plating material: black finish Strength class: 12.9 |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||
|
|
ISO 7379-16-M12-90-NI | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; A2 stainless steel; M12; 1.75; Thread len: 18mm Type of mounting element: shoulder screw Material: A2 stainless steel Thread: M12 Thread pitch: 1.75 Thread length: 18mm Kind of head: cheese head; knurled Kind of cut: hex key Cut size: HEX 8mm Head height: 11mm Head diameter: 24mm ISO standard: ISO 7379 Plunger length: 90mm Plunger diameter: 16mm |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||
|
|
ISO 7379-20-M16-60 | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; steel; M16; 2; Thread len: 22mm; hex key; HEX 10mm Type of mounting element: shoulder screw Material: steel Thread: M16 Thread pitch: 2 Thread length: 22mm Kind of head: cheese head; knurled Kind of cut: hex key Cut size: HEX 10mm Head height: 14mm Head diameter: 30mm ISO standard: ISO 7379 Plunger length: 60mm Plunger diameter: 20mm Plating material: black finish Strength class: 12.9 |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||
|
|
ISO 7379-24-M20-55 | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; steel; M20; 2.5; Thread len: 27mm; hex key; Ø: 24mm Type of mounting element: shoulder screw Material: steel Thread: M20 Thread pitch: 2.5 Thread length: 27mm Kind of head: cheese head; knurled Kind of cut: hex key Cut size: HEX 12mm Head height: 16mm Head diameter: 36mm ISO standard: ISO 7379 Plunger length: 55mm Plunger diameter: 24mm Plating material: black finish Strength class: 12.9 |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||
|
|
ISO 7379-24-M20-80 | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; steel; M20; 2.5; Thread len: 27mm; hex key; Ø: 24mm Plating material: black finish Kind of head: cheese head; knurled Kind of cut: hex key ISO standard: ISO 7379 Thread: M20 Type of mounting element: shoulder screw Cut size: HEX 12mm Head height: 16mm Plunger diameter: 24mm Thread length: 27mm Plunger length: 80mm Head diameter: 36mm Thread pitch: 2.5 Strength class: 12.9 Material: steel |
auf Bestellung 2 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
|
|
ISO 7379-4-M3-12 | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; steel; M3; 0.5; Thread len: 7mm; hex key; HEX 2mm Thread: M3 Head height: 3mm Cut size: HEX 2mm Plunger diameter: 4mm Thread length: 7mm Head diameter: 7mm Plunger length: 12mm Thread pitch: 0.5 Strength class: 12.9 Plating material: black finish Material: steel Kind of head: cheese head; knurled Kind of cut: hex key ISO standard: ISO 7379 Type of mounting element: shoulder screw |
auf Bestellung 62 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
|
|
ISO 7379-5-M4-25-NI | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; A2 stainless steel; M4; 0.7; Thread len: 8mm Type of mounting element: shoulder screw Material: A2 stainless steel Thread: M4 Thread pitch: 0.7 Thread length: 8mm Kind of head: cheese head; knurled Kind of cut: hex key Cut size: HEX 2.5mm Head height: 4mm Head diameter: 9mm ISO standard: ISO 7379 Plunger length: 25mm Plunger diameter: 5mm |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||
 |
ISO 7379-5-M4-8 | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; steel; M4; 0.7; Thread len: 8mm; hex key; HEX 2.5mm Type of mounting element: shoulder screw Material: steel Thread: M4 Thread pitch: 0.7 Thread length: 8mm Kind of head: cheese head; knurled Kind of cut: hex key Cut size: HEX 2.5mm Head height: 4mm Head diameter: 9mm ISO standard: ISO 7379 Plunger length: 8mm Plunger diameter: 5mm Plating material: black finish Strength class: 12.9 |
auf Bestellung 137 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
|
|
ISO 7379-5-M4-8-NI | ELESA+GANTER |
Category: Shoulder Screws Description: Shoulder screw; A2 stainless steel; M4; 0.7; Thread len: 8mm Type of mounting element: shoulder screw Material: A2 stainless steel Thread: M4 Thread pitch: 0.7 Thread length: 8mm Kind of head: cheese head; knurled Kind of cut: hex key Cut size: HEX 2.5mm Head height: 4mm Head diameter: 9mm ISO standard: ISO 7379 Plunger length: 8mm Plunger diameter: 5mm |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||
| Кріплення DVA.2-8-8-M3-6-40 | ELESA+GANTER | Віброамортизатор M3 D: 8мм гума Довж: 8мм Довж.гвинта: 6мм 50Н |
auf Bestellung 50 Stücke: Lieferzeit 14-21 Tag (e) |
Im Einkaufswagen Stück im Wert von UAH | |||||||
| Кріплення DVA.2-8-8-M3-6-55 | ELESA+GANTER | Віброамортизатор M3 D: 8мм гума Довж: 8мм Довж.гвинта: 6мм 85Н |
auf Bestellung 48 Stücke: Lieferzeit 14-21 Tag (e) |
Im Einkaufswagen Stück im Wert von UAH | |||||||
 |
LX.40-SW17-M12X102-S | ELESA+GANTER |
Category: Feet Description: Foot; rigid,with screwdriver slot,with lever; Base dia: 40mm Type of mounting element: foot Thread: M12 Static load: 5kN Version: rigid; with lever; with screwdriver slot Plunger material: steel Body material: technopolymer PA Height: 13mm Spanner size: 17mm Base diameter: 40mm Plunger length: 102mm |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||
| M.1043/30-350-EP | ELESA+GANTER |
Category: Handles Description: Holder; aluminium; black; H: 78mm; L: 374mm; Holes pitch: 350mm; oval Plating material: epoxy resin Trade name: handle Type of mounting element: holder Shape: oval Length: 374mm Diameter: 30mm Height: 78mm Mounting holes pitch: 350mm Material: aluminium Colour: black |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | |||||||
| M.743/190 B-M8 | ELESA+GANTER |
Category: Handles Description: Holder; technopolymer PP; black; H: 53.5mm; L: 176mm; W: 26mm; handle Type of mounting element: holder Material: technopolymer PP Colour: black Height: 53.5mm Length: 176mm Width: 26mm Mounting: M8x12 screw Mounting holes pitch: 160mm Boss material: brass Trade name: handle |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | |||||||
 |
MBT.30 P-M6X16-C5 | ELESA+GANTER |
Category: Knobs Description: Knob; Ø: 31mm; Ext.thread: M6; 16mm; H: 24mm; technopolymer PP; MBT-P Type of mounting element: knob Diameter: 31mm External thread: M6 Thread length: 16mm Height: 24mm Body material: technopolymer PP Plunger material: steel Body colour: black Cap colour: blue Manufacturer series: MBT-P |
auf Bestellung 8 Stücke: Lieferzeit 14-21 Tag (e) |
|
| GN 55.4-ND-7,5-4-1,5 |
Hersteller: ELESA+GANTER
Permanent magnet; neodymium; height 3mm; width; 7,5mm, length: 10mm, 7.5N, steel GN 55.4-ND-7,5-4-1,5 Elesa+Ganter M GN 55.4-ND-7,5-4-1,5
Anzahl je Verpackung: 5 Stücke
Permanent magnet; neodymium; height 3mm; width; 7,5mm, length: 10mm, 7.5N, steel GN 55.4-ND-7,5-4-1,5 Elesa+Ganter M GN 55.4-ND-7,5-4-1,5
Anzahl je Verpackung: 5 Stücke
auf Bestellung 10 Stücke:
Lieferzeit 7-14 Tag (e)| Anzahl | Preis |
|---|---|
| 10+ | 3.49 EUR |
| GN7045.2-M3-12-NI |
|
Hersteller: ELESA+GANTER
Category: Bolts
Description: Screw; with recessed stud; M3x12; 0.5; Head: cheese head; Phillips
Thread: M3
Head height: 2mm
Cut size: PH2
Plunger diameter: 2.2mm
Thread length: 4mm
Head diameter: 5.5mm
Length: 12mm
Thread pitch: 0.5
Material: stainless steel
Kind of head: cheese head
Kind of cut: Phillips
Version: with recessed stud
Type of mounting element: screw
Category: Bolts
Description: Screw; with recessed stud; M3x12; 0.5; Head: cheese head; Phillips
Thread: M3
Head height: 2mm
Cut size: PH2
Plunger diameter: 2.2mm
Thread length: 4mm
Head diameter: 5.5mm
Length: 12mm
Thread pitch: 0.5
Material: stainless steel
Kind of head: cheese head
Kind of cut: Phillips
Version: with recessed stud
Type of mounting element: screw
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| GN754-10-20-M10-KL-ST |
|
Hersteller: ELESA+GANTER
Category: Joints
Description: Fork joint; Øhole: 10mm; M10; right hand thread,outside; steel
Type of mounting element: fork joint
Manufacturer series: GN 754
Thread: M10
Kind of thread: outside; right hand thread
Material: steel
Version: with pin
Plating material: zinc
Hole diameter: 10mm
Width: 20mm
Length: 69mm
Category: Joints
Description: Fork joint; Øhole: 10mm; M10; right hand thread,outside; steel
Type of mounting element: fork joint
Manufacturer series: GN 754
Thread: M10
Kind of thread: outside; right hand thread
Material: steel
Version: with pin
Plating material: zinc
Hole diameter: 10mm
Width: 20mm
Length: 69mm
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| GN754-12-24-M12-KL-ST |
|
Hersteller: ELESA+GANTER
Category: Joints
Description: Fork joint; Øhole: 12mm; M12; right hand thread,outside; steel
Type of mounting element: fork joint
Manufacturer series: GN 754
Thread: M12
Kind of thread: outside; right hand thread
Material: steel
Version: with pin
Plating material: zinc
Hole diameter: 12mm
Width: 24mm
Length: 82mm
Category: Joints
Description: Fork joint; Øhole: 12mm; M12; right hand thread,outside; steel
Type of mounting element: fork joint
Manufacturer series: GN 754
Thread: M12
Kind of thread: outside; right hand thread
Material: steel
Version: with pin
Plating material: zinc
Hole diameter: 12mm
Width: 24mm
Length: 82mm
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| GN754-14-28-M14-KL-ST |
|
Hersteller: ELESA+GANTER
Category: Joints
Description: Fork joint; Øhole: 14mm; M14; right hand thread,outside; steel
Type of mounting element: fork joint
Manufacturer series: GN 754
Thread: M14
Kind of thread: outside; right hand thread
Material: steel
Version: with pin
Plating material: zinc
Hole diameter: 14mm
Width: 27mm
Length: 94mm
Category: Joints
Description: Fork joint; Øhole: 14mm; M14; right hand thread,outside; steel
Type of mounting element: fork joint
Manufacturer series: GN 754
Thread: M14
Kind of thread: outside; right hand thread
Material: steel
Version: with pin
Plating material: zinc
Hole diameter: 14mm
Width: 27mm
Length: 94mm
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| GN754-16-32-M16-KL-ST |
|
Hersteller: ELESA+GANTER
Category: Joints
Description: Fork joint; Øhole: 16mm; M16; right hand thread,outside; steel
Type of mounting element: fork joint
Manufacturer series: GN 754
Thread: M16
Kind of thread: outside; right hand thread
Material: steel
Version: with pin
Plating material: zinc
Hole diameter: 16mm
Width: 32mm
Length: 108mm
Category: Joints
Description: Fork joint; Øhole: 16mm; M16; right hand thread,outside; steel
Type of mounting element: fork joint
Manufacturer series: GN 754
Thread: M16
Kind of thread: outside; right hand thread
Material: steel
Version: with pin
Plating material: zinc
Hole diameter: 16mm
Width: 32mm
Length: 108mm
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| GN754-6-12-M6-KL-ST |
|
Hersteller: ELESA+GANTER
Category: Joints
Description: Fork joint; Øhole: 6mm; M6; right hand thread,outside; steel
Type of mounting element: fork joint
Manufacturer series: GN 754
Thread: M6
Kind of thread: outside; right hand thread
Material: steel
Version: with pin
Plating material: zinc
Hole diameter: 6mm
Width: 12mm
Length: 44mm
Category: Joints
Description: Fork joint; Øhole: 6mm; M6; right hand thread,outside; steel
Type of mounting element: fork joint
Manufacturer series: GN 754
Thread: M6
Kind of thread: outside; right hand thread
Material: steel
Version: with pin
Plating material: zinc
Hole diameter: 6mm
Width: 12mm
Length: 44mm
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| GN754-8-16-M8-KL-ST |
|
Hersteller: ELESA+GANTER
Category: Joints
Description: Fork joint; Øhole: 8mm; M8; right hand thread,outside; steel
Type of mounting element: fork joint
Manufacturer series: GN 754
Thread: M8
Kind of thread: outside; right hand thread
Material: steel
Version: with pin
Plating material: zinc
Hole diameter: 8mm
Width: 16mm
Length: 57mm
Category: Joints
Description: Fork joint; Øhole: 8mm; M8; right hand thread,outside; steel
Type of mounting element: fork joint
Manufacturer series: GN 754
Thread: M8
Kind of thread: outside; right hand thread
Material: steel
Version: with pin
Plating material: zinc
Hole diameter: 8mm
Width: 16mm
Length: 57mm
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| GN7984.3-M3-10-BT |
|
Hersteller: ELESA+GANTER
Category: Bolts
Description: Screw; M3x10; 0.5; Head: cheese head; hex key; HEX 2mm; steel
Type of mounting element: screw
Thread: M3
Thread pitch: 0.5
Length: 10mm
Kind of head: cheese head
Kind of cut: hex key
Cut size: HEX 2mm
Material: steel
Plating material: black finish; oxidized
Head height: 2mm
Head diameter: 4.5mm
ISO standard: ISO 898-1
Category: Bolts
Description: Screw; M3x10; 0.5; Head: cheese head; hex key; HEX 2mm; steel
Type of mounting element: screw
Thread: M3
Thread pitch: 0.5
Length: 10mm
Kind of head: cheese head
Kind of cut: hex key
Cut size: HEX 2mm
Material: steel
Plating material: black finish; oxidized
Head height: 2mm
Head diameter: 4.5mm
ISO standard: ISO 898-1
auf Bestellung 6 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 6+ | 11.91 EUR |
| GN8341-40-M4-MT-F |
|
Hersteller: ELESA+GANTER
Category: Knobs
Description: Knob wing; Int.thread: M4; 8mm; H: 22mm; stainless steel; W: 40mm
Manufacturer series: GN 8341
Body material: stainless steel
Type of mounting element: knob wing
Gasket material: FKM
Internal thread: M4
Body colour: natural
Thread length: 8mm
Height: 22mm
Width: 40mm
Category: Knobs
Description: Knob wing; Int.thread: M4; 8mm; H: 22mm; stainless steel; W: 40mm
Manufacturer series: GN 8341
Body material: stainless steel
Type of mounting element: knob wing
Gasket material: FKM
Internal thread: M4
Body colour: natural
Thread length: 8mm
Height: 22mm
Width: 40mm
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| GN8341-40-M4-PL-F |
|
Hersteller: ELESA+GANTER
Category: Knobs
Description: Knob wing; Int.thread: M4; 8mm; H: 22mm; stainless steel; W: 40mm
Manufacturer series: GN 8341
Body material: stainless steel
Type of mounting element: knob wing
Gasket material: FKM
Internal thread: M4
Body colour: natural
Thread length: 8mm
Height: 22mm
Width: 40mm
Category: Knobs
Description: Knob wing; Int.thread: M4; 8mm; H: 22mm; stainless steel; W: 40mm
Manufacturer series: GN 8341
Body material: stainless steel
Type of mounting element: knob wing
Gasket material: FKM
Internal thread: M4
Body colour: natural
Thread length: 8mm
Height: 22mm
Width: 40mm
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| GN8341-50-M5-MT-F |
|
Hersteller: ELESA+GANTER
Category: Knobs
Description: Knob wing; Int.thread: M5; 10mm; H: 28mm; stainless steel; W: 50mm
Manufacturer series: GN 8341
Body material: stainless steel
Type of mounting element: knob wing
Gasket material: FKM
Internal thread: M5
Body colour: natural
Thread length: 10mm
Height: 28mm
Width: 50mm
Category: Knobs
Description: Knob wing; Int.thread: M5; 10mm; H: 28mm; stainless steel; W: 50mm
Manufacturer series: GN 8341
Body material: stainless steel
Type of mounting element: knob wing
Gasket material: FKM
Internal thread: M5
Body colour: natural
Thread length: 10mm
Height: 28mm
Width: 50mm
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| GN8341-50-M5-PL-F |
|
Hersteller: ELESA+GANTER
Category: Knobs
Description: Knob wing; Int.thread: M5; 10mm; H: 28mm; stainless steel; W: 50mm
Manufacturer series: GN 8341
Body material: stainless steel
Type of mounting element: knob wing
Gasket material: FKM
Internal thread: M5
Body colour: natural
Thread length: 10mm
Height: 28mm
Width: 50mm
Category: Knobs
Description: Knob wing; Int.thread: M5; 10mm; H: 28mm; stainless steel; W: 50mm
Manufacturer series: GN 8341
Body material: stainless steel
Type of mounting element: knob wing
Gasket material: FKM
Internal thread: M5
Body colour: natural
Thread length: 10mm
Height: 28mm
Width: 50mm
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| GN8341-63-M6-MT-F |
|
Hersteller: ELESA+GANTER
Category: Knobs
Description: Knob wing; Int.thread: M6; 12mm; H: 35mm; stainless steel; W: 63mm
Manufacturer series: GN 8341
Body material: stainless steel
Type of mounting element: knob wing
Gasket material: FKM
Internal thread: M6
Body colour: natural
Thread length: 12mm
Height: 35mm
Width: 63mm
Category: Knobs
Description: Knob wing; Int.thread: M6; 12mm; H: 35mm; stainless steel; W: 63mm
Manufacturer series: GN 8341
Body material: stainless steel
Type of mounting element: knob wing
Gasket material: FKM
Internal thread: M6
Body colour: natural
Thread length: 12mm
Height: 35mm
Width: 63mm
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| GN8341-63-M6-PL-F |
|
Hersteller: ELESA+GANTER
Category: Knobs
Description: Knob wing; Int.thread: M6; 12mm; H: 35mm; stainless steel; W: 63mm
Manufacturer series: GN 8341
Body material: stainless steel
Type of mounting element: knob wing
Gasket material: FKM
Internal thread: M6
Body colour: natural
Thread length: 12mm
Height: 35mm
Width: 63mm
Category: Knobs
Description: Knob wing; Int.thread: M6; 12mm; H: 35mm; stainless steel; W: 63mm
Manufacturer series: GN 8341
Body material: stainless steel
Type of mounting element: knob wing
Gasket material: FKM
Internal thread: M6
Body colour: natural
Thread length: 12mm
Height: 35mm
Width: 63mm
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| GN912.3-M3-12-NI |
|
Hersteller: ELESA+GANTER
Category: Bolts
Description: Screw; M3x12; 0.5; Head: cheese head; hex key; HEX 2.5mm
Thread: M3
Head height: 3mm
Cut size: HEX 2.5mm
Head diameter: 4.5mm
Length: 12mm
Thread pitch: 0.5
Material: stainless steel
Kind of head: cheese head
Kind of cut: hex key
Type of mounting element: screw
Category: Bolts
Description: Screw; M3x12; 0.5; Head: cheese head; hex key; HEX 2.5mm
Thread: M3
Head height: 3mm
Cut size: HEX 2.5mm
Head diameter: 4.5mm
Length: 12mm
Thread pitch: 0.5
Material: stainless steel
Kind of head: cheese head
Kind of cut: hex key
Type of mounting element: screw
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| GN990-AL-D12-1000-EL |
|
Hersteller: ELESA+GANTER
Category: Aluminium Profiles
Description: Connecting tubes; D: 12mm; L: 1m; aluminium; oval
Type of mounting element: connecting tubes
D dimension: 12mm
Length: 1m
Material: aluminium
Kind of profile: oval
Category: Aluminium Profiles
Description: Connecting tubes; D: 12mm; L: 1m; aluminium; oval
Type of mounting element: connecting tubes
D dimension: 12mm
Length: 1m
Material: aluminium
Kind of profile: oval
auf Bestellung 6 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 4+ | 18.45 EUR |
| 5+ | 17.39 EUR |
| HCL-400-M12 |
|
Hersteller: ELESA+GANTER
Category: Level Indicators
Description: Column level indicator; M12; Ømount.hole: 400mm
Thread: M12
Overall length: 426mm
Type of mounting element: column level indicator
Panel cutout diameter: 400mm
Body material: technopolymer PA
Category: Level Indicators
Description: Column level indicator; M12; Ømount.hole: 400mm
Thread: M12
Overall length: 426mm
Type of mounting element: column level indicator
Panel cutout diameter: 400mm
Body material: technopolymer PA
auf Bestellung 3 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 2+ | 62.85 EUR |
| I.701/20+X-M4 |
Hersteller: ELESA+GANTER
Category: Knobs
Description: Handle; Ø: 13.5mm; Ext.thread: M4; 8mm; L: 20mm; twistable
Diameter: 13.5mm
Type of mounting element: handle
External thread: M4
Version: twistable
Thread length: 8mm
Length: 20mm
Category: Knobs
Description: Handle; Ø: 13.5mm; Ext.thread: M4; 8mm; L: 20mm; twistable
Diameter: 13.5mm
Type of mounting element: handle
External thread: M4
Version: twistable
Thread length: 8mm
Length: 20mm
auf Bestellung 1 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 1+ | 71.5 EUR |
| ISO 7379-10-M8-16 |
|
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M8
Type of mounting element: shoulder screw
Cut size: HEX 5mm
Head height: 7mm
Plunger diameter: 10mm
Thread length: 13mm
Plunger length: 16mm
Head diameter: 16mm
Thread pitch: 1.25
Strength class: 12.9
Material: steel
Category: Shoulder Screws
Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M8
Type of mounting element: shoulder screw
Cut size: HEX 5mm
Head height: 7mm
Plunger diameter: 10mm
Thread length: 13mm
Plunger length: 16mm
Head diameter: 16mm
Thread pitch: 1.25
Strength class: 12.9
Material: steel
auf Bestellung 37 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 37+ | 1.93 EUR |
| ISO 7379-10-M8-16-NI |
|
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; A2 stainless steel; M8; 1.25; Thread len: 13mm
Type of mounting element: shoulder screw
Material: A2 stainless steel
Thread: M8
Thread pitch: 1.25
Thread length: 13mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 5mm
Head height: 7mm
Head diameter: 16mm
ISO standard: ISO 7379
Plunger length: 16mm
Plunger diameter: 10mm
Category: Shoulder Screws
Description: Shoulder screw; A2 stainless steel; M8; 1.25; Thread len: 13mm
Type of mounting element: shoulder screw
Material: A2 stainless steel
Thread: M8
Thread pitch: 1.25
Thread length: 13mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 5mm
Head height: 7mm
Head diameter: 16mm
ISO standard: ISO 7379
Plunger length: 16mm
Plunger diameter: 10mm
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| ISO 7379-10-M8-20 |
|
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M8
Type of mounting element: shoulder screw
Cut size: HEX 5mm
Head height: 7mm
Plunger diameter: 10mm
Thread length: 13mm
Plunger length: 20mm
Head diameter: 16mm
Thread pitch: 1.25
Strength class: 12.9
Material: steel
Category: Shoulder Screws
Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M8
Type of mounting element: shoulder screw
Cut size: HEX 5mm
Head height: 7mm
Plunger diameter: 10mm
Thread length: 13mm
Plunger length: 20mm
Head diameter: 16mm
Thread pitch: 1.25
Strength class: 12.9
Material: steel
auf Bestellung 6 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 6+ | 11.91 EUR |
| ISO 7379-10-M8-25 |
|
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M8
Type of mounting element: shoulder screw
Cut size: HEX 5mm
Head height: 7mm
Plunger diameter: 10mm
Thread length: 13mm
Plunger length: 25mm
Head diameter: 16mm
Thread pitch: 1.25
Strength class: 12.9
Material: steel
Category: Shoulder Screws
Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M8
Type of mounting element: shoulder screw
Cut size: HEX 5mm
Head height: 7mm
Plunger diameter: 10mm
Thread length: 13mm
Plunger length: 25mm
Head diameter: 16mm
Thread pitch: 1.25
Strength class: 12.9
Material: steel
auf Bestellung 31 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 31+ | 2.3 EUR |
| ISO 7379-10-M8-25-NI |
|
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; A2 stainless steel; M8; 1.25; Thread len: 13mm
Type of mounting element: shoulder screw
Material: A2 stainless steel
Thread: M8
Thread pitch: 1.25
Thread length: 13mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 5mm
Head height: 7mm
Head diameter: 16mm
ISO standard: ISO 7379
Plunger length: 25mm
Plunger diameter: 10mm
Category: Shoulder Screws
Description: Shoulder screw; A2 stainless steel; M8; 1.25; Thread len: 13mm
Type of mounting element: shoulder screw
Material: A2 stainless steel
Thread: M8
Thread pitch: 1.25
Thread length: 13mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 5mm
Head height: 7mm
Head diameter: 16mm
ISO standard: ISO 7379
Plunger length: 25mm
Plunger diameter: 10mm
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| ISO 7379-10-M8-35 |
|
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M8
Type of mounting element: shoulder screw
Cut size: HEX 5mm
Head height: 7mm
Plunger diameter: 10mm
Thread length: 13mm
Plunger length: 35mm
Head diameter: 16mm
Thread pitch: 1.25
Strength class: 12.9
Material: steel
Category: Shoulder Screws
Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M8
Type of mounting element: shoulder screw
Cut size: HEX 5mm
Head height: 7mm
Plunger diameter: 10mm
Thread length: 13mm
Plunger length: 35mm
Head diameter: 16mm
Thread pitch: 1.25
Strength class: 12.9
Material: steel
auf Bestellung 25 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 25+ | 2.86 EUR |
| ISO 7379-10-M8-40 |
|
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M8
Type of mounting element: shoulder screw
Cut size: HEX 5mm
Head height: 7mm
Plunger diameter: 10mm
Thread length: 13mm
Plunger length: 40mm
Head diameter: 16mm
Thread pitch: 1.25
Strength class: 12.9
Material: steel
Category: Shoulder Screws
Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M8
Type of mounting element: shoulder screw
Cut size: HEX 5mm
Head height: 7mm
Plunger diameter: 10mm
Thread length: 13mm
Plunger length: 40mm
Head diameter: 16mm
Thread pitch: 1.25
Strength class: 12.9
Material: steel
auf Bestellung 99 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 30+ | 2.46 EUR |
| 37+ | 1.96 EUR |
| 50+ | 1.94 EUR |
| ISO 7379-10-M8-45 |
|
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M8
Type of mounting element: shoulder screw
Cut size: HEX 5mm
Head height: 7mm
Plunger diameter: 10mm
Thread length: 13mm
Plunger length: 45mm
Head diameter: 16mm
Thread pitch: 1.25
Strength class: 12.9
Material: steel
Category: Shoulder Screws
Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M8
Type of mounting element: shoulder screw
Cut size: HEX 5mm
Head height: 7mm
Plunger diameter: 10mm
Thread length: 13mm
Plunger length: 45mm
Head diameter: 16mm
Thread pitch: 1.25
Strength class: 12.9
Material: steel
auf Bestellung 8 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 8+ | 8.94 EUR |
| ISO 7379-10-M8-50 |
|
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M8
Type of mounting element: shoulder screw
Cut size: HEX 5mm
Head height: 7mm
Plunger diameter: 10mm
Thread length: 13mm
Plunger length: 50mm
Head diameter: 16mm
Thread pitch: 1.25
Strength class: 12.9
Material: steel
Category: Shoulder Screws
Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M8
Type of mounting element: shoulder screw
Cut size: HEX 5mm
Head height: 7mm
Plunger diameter: 10mm
Thread length: 13mm
Plunger length: 50mm
Head diameter: 16mm
Thread pitch: 1.25
Strength class: 12.9
Material: steel
auf Bestellung 15 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 15+ | 4.76 EUR |
| ISO 7379-10-M8-60 |
|
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M8
Type of mounting element: shoulder screw
Cut size: HEX 5mm
Head height: 7mm
Plunger diameter: 10mm
Thread length: 13mm
Plunger length: 60mm
Head diameter: 16mm
Thread pitch: 1.25
Strength class: 12.9
Material: steel
Category: Shoulder Screws
Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M8
Type of mounting element: shoulder screw
Cut size: HEX 5mm
Head height: 7mm
Plunger diameter: 10mm
Thread length: 13mm
Plunger length: 60mm
Head diameter: 16mm
Thread pitch: 1.25
Strength class: 12.9
Material: steel
auf Bestellung 17 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 17+ | 4.2 EUR |
| ISO 7379-10-M8-60-NI |
|
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; A2 stainless steel; M8; 1.25; Thread len: 13mm
Type of mounting element: shoulder screw
Material: A2 stainless steel
Thread: M8
Thread pitch: 1.25
Thread length: 13mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 5mm
Head height: 7mm
Head diameter: 16mm
ISO standard: ISO 7379
Plunger length: 60mm
Plunger diameter: 10mm
Category: Shoulder Screws
Description: Shoulder screw; A2 stainless steel; M8; 1.25; Thread len: 13mm
Type of mounting element: shoulder screw
Material: A2 stainless steel
Thread: M8
Thread pitch: 1.25
Thread length: 13mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 5mm
Head height: 7mm
Head diameter: 16mm
ISO standard: ISO 7379
Plunger length: 60mm
Plunger diameter: 10mm
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| ISO 7379-10-M8-80 |
|
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M8
Type of mounting element: shoulder screw
Cut size: HEX 5mm
Head height: 7mm
Plunger diameter: 10mm
Thread length: 13mm
Plunger length: 80mm
Head diameter: 16mm
Thread pitch: 1.25
Strength class: 12.9
Material: steel
Category: Shoulder Screws
Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M8
Type of mounting element: shoulder screw
Cut size: HEX 5mm
Head height: 7mm
Plunger diameter: 10mm
Thread length: 13mm
Plunger length: 80mm
Head diameter: 16mm
Thread pitch: 1.25
Strength class: 12.9
Material: steel
auf Bestellung 11 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 11+ | 6.51 EUR |
| ISO 7379-10-M8-90 |
|
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M8
Type of mounting element: shoulder screw
Cut size: HEX 5mm
Head height: 7mm
Plunger diameter: 10mm
Thread length: 13mm
Plunger length: 90mm
Head diameter: 16mm
Thread pitch: 1.25
Strength class: 12.9
Material: steel
Category: Shoulder Screws
Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M8
Type of mounting element: shoulder screw
Cut size: HEX 5mm
Head height: 7mm
Plunger diameter: 10mm
Thread length: 13mm
Plunger length: 90mm
Head diameter: 16mm
Thread pitch: 1.25
Strength class: 12.9
Material: steel
auf Bestellung 9 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 9+ | 7.95 EUR |
| ISO 7379-12-M10-16 |
|
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M10; 1.5; Thread len: 16mm; hex key; HEX 6mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M10
Type of mounting element: shoulder screw
Cut size: HEX 6mm
Head height: 8mm
Plunger diameter: 12mm
Thread length: 16mm
Plunger length: 16mm
Head diameter: 18mm
Thread pitch: 1.5
Strength class: 12.9
Material: steel
Category: Shoulder Screws
Description: Shoulder screw; steel; M10; 1.5; Thread len: 16mm; hex key; HEX 6mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M10
Type of mounting element: shoulder screw
Cut size: HEX 6mm
Head height: 8mm
Plunger diameter: 12mm
Thread length: 16mm
Plunger length: 16mm
Head diameter: 18mm
Thread pitch: 1.5
Strength class: 12.9
Material: steel
auf Bestellung 13 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 13+ | 5.51 EUR |
| ISO 7379-12-M10-16-NI |
|
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; A2 stainless steel; M10; 1.5; Thread len: 16mm
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M10
Type of mounting element: shoulder screw
Cut size: HEX 6mm
Head height: 8mm
Plunger diameter: 12mm
Thread length: 16mm
Plunger length: 16mm
Head diameter: 18mm
Thread pitch: 1.5
Material: A2 stainless steel
Category: Shoulder Screws
Description: Shoulder screw; A2 stainless steel; M10; 1.5; Thread len: 16mm
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M10
Type of mounting element: shoulder screw
Cut size: HEX 6mm
Head height: 8mm
Plunger diameter: 12mm
Thread length: 16mm
Plunger length: 16mm
Head diameter: 18mm
Thread pitch: 1.5
Material: A2 stainless steel
auf Bestellung 1 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 1+ | 71.5 EUR |
| ISO 7379-12-M10-20 |
|
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M10; 1.5; Thread len: 16mm; hex key; HEX 6mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M10
Type of mounting element: shoulder screw
Cut size: HEX 6mm
Head height: 8mm
Plunger diameter: 12mm
Thread length: 16mm
Plunger length: 20mm
Head diameter: 18mm
Thread pitch: 1.5
Strength class: 12.9
Material: steel
Category: Shoulder Screws
Description: Shoulder screw; steel; M10; 1.5; Thread len: 16mm; hex key; HEX 6mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M10
Type of mounting element: shoulder screw
Cut size: HEX 6mm
Head height: 8mm
Plunger diameter: 12mm
Thread length: 16mm
Plunger length: 20mm
Head diameter: 18mm
Thread pitch: 1.5
Strength class: 12.9
Material: steel
auf Bestellung 27 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 27+ | 2.65 EUR |
| ISO 7379-12-M10-25 |
|
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M10; 1.5; Thread len: 16mm; hex key; HEX 6mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M10
Type of mounting element: shoulder screw
Cut size: HEX 6mm
Head height: 8mm
Plunger diameter: 12mm
Thread length: 16mm
Plunger length: 25mm
Head diameter: 18mm
Thread pitch: 1.5
Strength class: 12.9
Material: steel
Category: Shoulder Screws
Description: Shoulder screw; steel; M10; 1.5; Thread len: 16mm; hex key; HEX 6mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M10
Type of mounting element: shoulder screw
Cut size: HEX 6mm
Head height: 8mm
Plunger diameter: 12mm
Thread length: 16mm
Plunger length: 25mm
Head diameter: 18mm
Thread pitch: 1.5
Strength class: 12.9
Material: steel
auf Bestellung 40 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 27+ | 2.7 EUR |
| 34+ | 2.16 EUR |
| ISO 7379-12-M10-30 |
|
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M10; 1.5; Thread len: 16mm; hex key; HEX 6mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M10
Type of mounting element: shoulder screw
Cut size: HEX 6mm
Head height: 8mm
Plunger diameter: 12mm
Thread length: 16mm
Plunger length: 30mm
Head diameter: 18mm
Thread pitch: 1.5
Strength class: 12.9
Material: steel
Category: Shoulder Screws
Description: Shoulder screw; steel; M10; 1.5; Thread len: 16mm; hex key; HEX 6mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M10
Type of mounting element: shoulder screw
Cut size: HEX 6mm
Head height: 8mm
Plunger diameter: 12mm
Thread length: 16mm
Plunger length: 30mm
Head diameter: 18mm
Thread pitch: 1.5
Strength class: 12.9
Material: steel
auf Bestellung 1 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 1+ | 71.5 EUR |
| ISO 7379-12-M10-35 |
|
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M10; 1.5; Thread len: 16mm; hex key; HEX 6mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M10
Type of mounting element: shoulder screw
Cut size: HEX 6mm
Head height: 8mm
Plunger diameter: 12mm
Thread length: 16mm
Plunger length: 35mm
Head diameter: 18mm
Thread pitch: 1.5
Strength class: 12.9
Material: steel
Category: Shoulder Screws
Description: Shoulder screw; steel; M10; 1.5; Thread len: 16mm; hex key; HEX 6mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M10
Type of mounting element: shoulder screw
Cut size: HEX 6mm
Head height: 8mm
Plunger diameter: 12mm
Thread length: 16mm
Plunger length: 35mm
Head diameter: 18mm
Thread pitch: 1.5
Strength class: 12.9
Material: steel
auf Bestellung 15 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 15+ | 4.76 EUR |
| ISO 7379-12-M10-40 |
|
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M10; 1.5; Thread len: 16mm; hex key; HEX 6mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M10
Type of mounting element: shoulder screw
Cut size: HEX 6mm
Head height: 8mm
Plunger diameter: 12mm
Thread length: 16mm
Plunger length: 40mm
Head diameter: 18mm
Thread pitch: 1.5
Strength class: 12.9
Material: steel
Category: Shoulder Screws
Description: Shoulder screw; steel; M10; 1.5; Thread len: 16mm; hex key; HEX 6mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M10
Type of mounting element: shoulder screw
Cut size: HEX 6mm
Head height: 8mm
Plunger diameter: 12mm
Thread length: 16mm
Plunger length: 40mm
Head diameter: 18mm
Thread pitch: 1.5
Strength class: 12.9
Material: steel
auf Bestellung 7 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 7+ | 10.21 EUR |
| ISO 7379-12-M10-50-NI |
|
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; A2 stainless steel; M10; 1.5; Thread len: 16mm
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M10
Type of mounting element: shoulder screw
Cut size: HEX 6mm
Head height: 8mm
Plunger diameter: 12mm
Thread length: 16mm
Plunger length: 50mm
Head diameter: 18mm
Thread pitch: 1.5
Material: A2 stainless steel
Category: Shoulder Screws
Description: Shoulder screw; A2 stainless steel; M10; 1.5; Thread len: 16mm
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M10
Type of mounting element: shoulder screw
Cut size: HEX 6mm
Head height: 8mm
Plunger diameter: 12mm
Thread length: 16mm
Plunger length: 50mm
Head diameter: 18mm
Thread pitch: 1.5
Material: A2 stainless steel
auf Bestellung 1 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 1+ | 71.5 EUR |
| ISO 7379-12-M10-60 |
|
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M10; 1.5; Thread len: 16mm; hex key; HEX 6mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M10
Type of mounting element: shoulder screw
Cut size: HEX 6mm
Head height: 8mm
Plunger diameter: 12mm
Thread length: 16mm
Plunger length: 60mm
Head diameter: 18mm
Thread pitch: 1.5
Strength class: 12.9
Material: steel
Category: Shoulder Screws
Description: Shoulder screw; steel; M10; 1.5; Thread len: 16mm; hex key; HEX 6mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M10
Type of mounting element: shoulder screw
Cut size: HEX 6mm
Head height: 8mm
Plunger diameter: 12mm
Thread length: 16mm
Plunger length: 60mm
Head diameter: 18mm
Thread pitch: 1.5
Strength class: 12.9
Material: steel
auf Bestellung 5 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 5+ | 14.3 EUR |
| ISO 7379-12-M10-60-NI |
|
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; A2 stainless steel; M10; 1.5; Thread len: 16mm
Type of mounting element: shoulder screw
Material: A2 stainless steel
Thread: M10
Thread pitch: 1.5
Thread length: 16mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 6mm
Head height: 8mm
Head diameter: 18mm
ISO standard: ISO 7379
Plunger length: 60mm
Plunger diameter: 12mm
Category: Shoulder Screws
Description: Shoulder screw; A2 stainless steel; M10; 1.5; Thread len: 16mm
Type of mounting element: shoulder screw
Material: A2 stainless steel
Thread: M10
Thread pitch: 1.5
Thread length: 16mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 6mm
Head height: 8mm
Head diameter: 18mm
ISO standard: ISO 7379
Plunger length: 60mm
Plunger diameter: 12mm
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| ISO 7379-12-M10-90 |
|
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M10; 1.5; Thread len: 16mm; hex key; HEX 6mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M10
Type of mounting element: shoulder screw
Cut size: HEX 6mm
Head height: 8mm
Plunger diameter: 12mm
Thread length: 16mm
Plunger length: 90mm
Head diameter: 18mm
Thread pitch: 1.5
Strength class: 12.9
Material: steel
Category: Shoulder Screws
Description: Shoulder screw; steel; M10; 1.5; Thread len: 16mm; hex key; HEX 6mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M10
Type of mounting element: shoulder screw
Cut size: HEX 6mm
Head height: 8mm
Plunger diameter: 12mm
Thread length: 16mm
Plunger length: 90mm
Head diameter: 18mm
Thread pitch: 1.5
Strength class: 12.9
Material: steel
auf Bestellung 1 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 1+ | 71.5 EUR |
| ISO 7379-16-M12-100 |
|
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M12; 1.75; Thread len: 18mm; hex key; Ø: 16mm
Plating material: black finish
Kind of head: cheese head; knurled
Type of mounting element: shoulder screw
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M12
Cut size: HEX 8mm
Head height: 11mm
Plunger diameter: 16mm
Thread length: 18mm
Head diameter: 24mm
Plunger length: 100mm
Strength class: 12.9
Thread pitch: 1.75
Material: steel
Category: Shoulder Screws
Description: Shoulder screw; steel; M12; 1.75; Thread len: 18mm; hex key; Ø: 16mm
Plating material: black finish
Kind of head: cheese head; knurled
Type of mounting element: shoulder screw
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M12
Cut size: HEX 8mm
Head height: 11mm
Plunger diameter: 16mm
Thread length: 18mm
Head diameter: 24mm
Plunger length: 100mm
Strength class: 12.9
Thread pitch: 1.75
Material: steel
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| ISO 7379-16-M12-100-NI |
|
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; A2 stainless steel; M12; 1.75; Thread len: 18mm
Kind of head: cheese head; knurled
Type of mounting element: shoulder screw
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M12
Cut size: HEX 8mm
Head height: 11mm
Plunger diameter: 16mm
Thread length: 18mm
Head diameter: 24mm
Plunger length: 100mm
Thread pitch: 1.75
Material: A2 stainless steel
Category: Shoulder Screws
Description: Shoulder screw; A2 stainless steel; M12; 1.75; Thread len: 18mm
Kind of head: cheese head; knurled
Type of mounting element: shoulder screw
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M12
Cut size: HEX 8mm
Head height: 11mm
Plunger diameter: 16mm
Thread length: 18mm
Head diameter: 24mm
Plunger length: 100mm
Thread pitch: 1.75
Material: A2 stainless steel
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| ISO 7379-16-M12-90 |
|
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M12; 1.75; Thread len: 18mm; hex key; Ø: 16mm
Type of mounting element: shoulder screw
Material: steel
Thread: M12
Thread pitch: 1.75
Thread length: 18mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 8mm
Head height: 11mm
Head diameter: 24mm
ISO standard: ISO 7379
Plunger length: 90mm
Plunger diameter: 16mm
Plating material: black finish
Strength class: 12.9
Category: Shoulder Screws
Description: Shoulder screw; steel; M12; 1.75; Thread len: 18mm; hex key; Ø: 16mm
Type of mounting element: shoulder screw
Material: steel
Thread: M12
Thread pitch: 1.75
Thread length: 18mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 8mm
Head height: 11mm
Head diameter: 24mm
ISO standard: ISO 7379
Plunger length: 90mm
Plunger diameter: 16mm
Plating material: black finish
Strength class: 12.9
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| ISO 7379-16-M12-90-NI |
|
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; A2 stainless steel; M12; 1.75; Thread len: 18mm
Type of mounting element: shoulder screw
Material: A2 stainless steel
Thread: M12
Thread pitch: 1.75
Thread length: 18mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 8mm
Head height: 11mm
Head diameter: 24mm
ISO standard: ISO 7379
Plunger length: 90mm
Plunger diameter: 16mm
Category: Shoulder Screws
Description: Shoulder screw; A2 stainless steel; M12; 1.75; Thread len: 18mm
Type of mounting element: shoulder screw
Material: A2 stainless steel
Thread: M12
Thread pitch: 1.75
Thread length: 18mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 8mm
Head height: 11mm
Head diameter: 24mm
ISO standard: ISO 7379
Plunger length: 90mm
Plunger diameter: 16mm
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| ISO 7379-20-M16-60 |
|
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M16; 2; Thread len: 22mm; hex key; HEX 10mm
Type of mounting element: shoulder screw
Material: steel
Thread: M16
Thread pitch: 2
Thread length: 22mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 10mm
Head height: 14mm
Head diameter: 30mm
ISO standard: ISO 7379
Plunger length: 60mm
Plunger diameter: 20mm
Plating material: black finish
Strength class: 12.9
Category: Shoulder Screws
Description: Shoulder screw; steel; M16; 2; Thread len: 22mm; hex key; HEX 10mm
Type of mounting element: shoulder screw
Material: steel
Thread: M16
Thread pitch: 2
Thread length: 22mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 10mm
Head height: 14mm
Head diameter: 30mm
ISO standard: ISO 7379
Plunger length: 60mm
Plunger diameter: 20mm
Plating material: black finish
Strength class: 12.9
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| ISO 7379-24-M20-55 |
|
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M20; 2.5; Thread len: 27mm; hex key; Ø: 24mm
Type of mounting element: shoulder screw
Material: steel
Thread: M20
Thread pitch: 2.5
Thread length: 27mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 12mm
Head height: 16mm
Head diameter: 36mm
ISO standard: ISO 7379
Plunger length: 55mm
Plunger diameter: 24mm
Plating material: black finish
Strength class: 12.9
Category: Shoulder Screws
Description: Shoulder screw; steel; M20; 2.5; Thread len: 27mm; hex key; Ø: 24mm
Type of mounting element: shoulder screw
Material: steel
Thread: M20
Thread pitch: 2.5
Thread length: 27mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 12mm
Head height: 16mm
Head diameter: 36mm
ISO standard: ISO 7379
Plunger length: 55mm
Plunger diameter: 24mm
Plating material: black finish
Strength class: 12.9
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| ISO 7379-24-M20-80 |
|
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M20; 2.5; Thread len: 27mm; hex key; Ø: 24mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M20
Type of mounting element: shoulder screw
Cut size: HEX 12mm
Head height: 16mm
Plunger diameter: 24mm
Thread length: 27mm
Plunger length: 80mm
Head diameter: 36mm
Thread pitch: 2.5
Strength class: 12.9
Material: steel
Category: Shoulder Screws
Description: Shoulder screw; steel; M20; 2.5; Thread len: 27mm; hex key; Ø: 24mm
Plating material: black finish
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Thread: M20
Type of mounting element: shoulder screw
Cut size: HEX 12mm
Head height: 16mm
Plunger diameter: 24mm
Thread length: 27mm
Plunger length: 80mm
Head diameter: 36mm
Thread pitch: 2.5
Strength class: 12.9
Material: steel
auf Bestellung 2 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 2+ | 35.75 EUR |
| ISO 7379-4-M3-12 |
|
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M3; 0.5; Thread len: 7mm; hex key; HEX 2mm
Thread: M3
Head height: 3mm
Cut size: HEX 2mm
Plunger diameter: 4mm
Thread length: 7mm
Head diameter: 7mm
Plunger length: 12mm
Thread pitch: 0.5
Strength class: 12.9
Plating material: black finish
Material: steel
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Type of mounting element: shoulder screw
Category: Shoulder Screws
Description: Shoulder screw; steel; M3; 0.5; Thread len: 7mm; hex key; HEX 2mm
Thread: M3
Head height: 3mm
Cut size: HEX 2mm
Plunger diameter: 4mm
Thread length: 7mm
Head diameter: 7mm
Plunger length: 12mm
Thread pitch: 0.5
Strength class: 12.9
Plating material: black finish
Material: steel
Kind of head: cheese head; knurled
Kind of cut: hex key
ISO standard: ISO 7379
Type of mounting element: shoulder screw
auf Bestellung 62 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 13+ | 5.51 EUR |
| 16+ | 4.7 EUR |
| 50+ | 4.58 EUR |
| ISO 7379-5-M4-25-NI |
|
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; A2 stainless steel; M4; 0.7; Thread len: 8mm
Type of mounting element: shoulder screw
Material: A2 stainless steel
Thread: M4
Thread pitch: 0.7
Thread length: 8mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 2.5mm
Head height: 4mm
Head diameter: 9mm
ISO standard: ISO 7379
Plunger length: 25mm
Plunger diameter: 5mm
Category: Shoulder Screws
Description: Shoulder screw; A2 stainless steel; M4; 0.7; Thread len: 8mm
Type of mounting element: shoulder screw
Material: A2 stainless steel
Thread: M4
Thread pitch: 0.7
Thread length: 8mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 2.5mm
Head height: 4mm
Head diameter: 9mm
ISO standard: ISO 7379
Plunger length: 25mm
Plunger diameter: 5mm
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| ISO 7379-5-M4-8 |
|
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M4; 0.7; Thread len: 8mm; hex key; HEX 2.5mm
Type of mounting element: shoulder screw
Material: steel
Thread: M4
Thread pitch: 0.7
Thread length: 8mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 2.5mm
Head height: 4mm
Head diameter: 9mm
ISO standard: ISO 7379
Plunger length: 8mm
Plunger diameter: 5mm
Plating material: black finish
Strength class: 12.9
Category: Shoulder Screws
Description: Shoulder screw; steel; M4; 0.7; Thread len: 8mm; hex key; HEX 2.5mm
Type of mounting element: shoulder screw
Material: steel
Thread: M4
Thread pitch: 0.7
Thread length: 8mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 2.5mm
Head height: 4mm
Head diameter: 9mm
ISO standard: ISO 7379
Plunger length: 8mm
Plunger diameter: 5mm
Plating material: black finish
Strength class: 12.9
auf Bestellung 137 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 13+ | 5.51 EUR |
| 16+ | 4.7 EUR |
| 50+ | 4.35 EUR |
| ISO 7379-5-M4-8-NI |
|
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; A2 stainless steel; M4; 0.7; Thread len: 8mm
Type of mounting element: shoulder screw
Material: A2 stainless steel
Thread: M4
Thread pitch: 0.7
Thread length: 8mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 2.5mm
Head height: 4mm
Head diameter: 9mm
ISO standard: ISO 7379
Plunger length: 8mm
Plunger diameter: 5mm
Category: Shoulder Screws
Description: Shoulder screw; A2 stainless steel; M4; 0.7; Thread len: 8mm
Type of mounting element: shoulder screw
Material: A2 stainless steel
Thread: M4
Thread pitch: 0.7
Thread length: 8mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 2.5mm
Head height: 4mm
Head diameter: 9mm
ISO standard: ISO 7379
Plunger length: 8mm
Plunger diameter: 5mm
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| Кріплення DVA.2-8-8-M3-6-40 |
Hersteller: ELESA+GANTER
Віброамортизатор M3 D: 8мм гума Довж: 8мм Довж.гвинта: 6мм 50Н
Віброамортизатор M3 D: 8мм гума Довж: 8мм Довж.гвинта: 6мм 50Н
auf Bestellung 50 Stücke:
Lieferzeit 14-21 Tag (e)Im Einkaufswagen Stück im Wert von UAH
| Кріплення DVA.2-8-8-M3-6-55 |
Hersteller: ELESA+GANTER
Віброамортизатор M3 D: 8мм гума Довж: 8мм Довж.гвинта: 6мм 85Н
Віброамортизатор M3 D: 8мм гума Довж: 8мм Довж.гвинта: 6мм 85Н
auf Bestellung 48 Stücke:
Lieferzeit 14-21 Tag (e)Im Einkaufswagen Stück im Wert von UAH
| LX.40-SW17-M12X102-S |
|
Hersteller: ELESA+GANTER
Category: Feet
Description: Foot; rigid,with screwdriver slot,with lever; Base dia: 40mm
Type of mounting element: foot
Thread: M12
Static load: 5kN
Version: rigid; with lever; with screwdriver slot
Plunger material: steel
Body material: technopolymer PA
Height: 13mm
Spanner size: 17mm
Base diameter: 40mm
Plunger length: 102mm
Category: Feet
Description: Foot; rigid,with screwdriver slot,with lever; Base dia: 40mm
Type of mounting element: foot
Thread: M12
Static load: 5kN
Version: rigid; with lever; with screwdriver slot
Plunger material: steel
Body material: technopolymer PA
Height: 13mm
Spanner size: 17mm
Base diameter: 40mm
Plunger length: 102mm
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| M.1043/30-350-EP |
|
Hersteller: ELESA+GANTER
Category: Handles
Description: Holder; aluminium; black; H: 78mm; L: 374mm; Holes pitch: 350mm; oval
Plating material: epoxy resin
Trade name: handle
Type of mounting element: holder
Shape: oval
Length: 374mm
Diameter: 30mm
Height: 78mm
Mounting holes pitch: 350mm
Material: aluminium
Colour: black
Category: Handles
Description: Holder; aluminium; black; H: 78mm; L: 374mm; Holes pitch: 350mm; oval
Plating material: epoxy resin
Trade name: handle
Type of mounting element: holder
Shape: oval
Length: 374mm
Diameter: 30mm
Height: 78mm
Mounting holes pitch: 350mm
Material: aluminium
Colour: black
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| M.743/190 B-M8 |
|
Hersteller: ELESA+GANTER
Category: Handles
Description: Holder; technopolymer PP; black; H: 53.5mm; L: 176mm; W: 26mm; handle
Type of mounting element: holder
Material: technopolymer PP
Colour: black
Height: 53.5mm
Length: 176mm
Width: 26mm
Mounting: M8x12 screw
Mounting holes pitch: 160mm
Boss material: brass
Trade name: handle
Category: Handles
Description: Holder; technopolymer PP; black; H: 53.5mm; L: 176mm; W: 26mm; handle
Type of mounting element: holder
Material: technopolymer PP
Colour: black
Height: 53.5mm
Length: 176mm
Width: 26mm
Mounting: M8x12 screw
Mounting holes pitch: 160mm
Boss material: brass
Trade name: handle
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| MBT.30 P-M6X16-C5 |
|
Hersteller: ELESA+GANTER
Category: Knobs
Description: Knob; Ø: 31mm; Ext.thread: M6; 16mm; H: 24mm; technopolymer PP; MBT-P
Type of mounting element: knob
Diameter: 31mm
External thread: M6
Thread length: 16mm
Height: 24mm
Body material: technopolymer PP
Plunger material: steel
Body colour: black
Cap colour: blue
Manufacturer series: MBT-P
Category: Knobs
Description: Knob; Ø: 31mm; Ext.thread: M6; 16mm; H: 24mm; technopolymer PP; MBT-P
Type of mounting element: knob
Diameter: 31mm
External thread: M6
Thread length: 16mm
Height: 24mm
Body material: technopolymer PP
Plunger material: steel
Body colour: black
Cap colour: blue
Manufacturer series: MBT-P
auf Bestellung 8 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 8+ | 8.94 EUR |