Produkte > ELESA+GANTER > Alle Produkte des Herstellers ELESA+GANTER (5609) > Seite 94 nach 94
| Foto | Bezeichnung | Hersteller | Beschreibung |
Verfügbarkeit |
Preis |
||
|---|---|---|---|---|---|---|---|
|
GN 439.5-38-M8-65-70 | ELESA+GANTER |
Category: FeetDescription: Vibroisolation foot; Ø: 38mm; H: 20mm; Shore hardness: 70; 920N Type of mounting element: vibroisolation foot Diameter: 38mm Height: 20mm Shore hardness: 70 Static load: 920N Thread length: 65mm Plunger material: stainless steel Foot material: rubber External thread: M8 |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||
|
CFSQ.60-SH-6-F-B-D-2 | ELESA+GANTER |
Category: Hinge Safety SwitchesDescription: Safety switch: hinged; CFSQ; NC + NO; cables; 2m; 190°; PIN: 4; IP67 Type of safety switch: hinged Manufacturer series: CFSQ Contacts configuration: NC + NO Connection: cables Lead length: 2m Mechanical rotation angle: 190° Number of pins: 4 IP rating: IP67 Operating temperature: -25...80°C Colour: matt black Mechanical durability: 2000000 cycles |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||
|
260262-C2 | ELESA+GANTER |
Category: HandlesDescription: Holder; polypropylene; black; H: 39mm; L: 144mm; W: 26mm; F2: 1kN Type of mounting element: holder Material: polypropylene Colour: black Height: 39mm Length: 144mm Cap colour: orange Width: 26mm Mounting: mounting hole without thread F2 Force: 1kN F1 Force: 1kN Panel cutout diameter: 8mm Trade name: handle |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||
| GN 583-M30 | ELESA+GANTER |
Category: NutsDescription: Lifting eye nut; M30; 3.5; steel; Plating: epoxy resin; pink Type of mounting element: lifting eye nut Thread: M30 Thread pitch: 3.5 Material: steel Plating material: epoxy resin Colour: pink |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | |||
|
ISO 7379-16-M12-100-NI | ELESA+GANTER |
Category: Shoulder ScrewsDescription: Shoulder screw; A2 stainless steel; M12; 1.75; Thread len: 18mm Type of mounting element: shoulder screw Material: A2 stainless steel Thread: M12 Thread pitch: 1.75 Thread length: 18mm Kind of head: cheese head; knurled Kind of cut: hex key Cut size: HEX 8mm Head height: 11mm Head diameter: 24mm ISO standard: ISO 7379 Plunger length: 100mm Plunger diameter: 16mm |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||
|
GN 751-14-56-M14-B | ELESA+GANTER |
Category: JointsDescription: Fork joint; Øhole: 14mm; M14; 2; right hand thread,inside; steel Type of mounting element: fork joint Hole diameter: 14mm Thread: M14 Thread pitch: 2 Kind of thread: inside; right hand thread Material: steel Length: 56mm Plating material: zinc DIN standard: DIN 71752 |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||
|
VTT.32-C-P-M6X45-C6 | ELESA+GANTER |
Category: KnobsDescription: Knob; Ø: 32mm; Ext.thread: M6; Int.thread: M6; 45mm; H: 22mm; Cap: red Type of mounting element: knob Diameter: 32mm External thread: M6 Internal thread: M6 Thread length: 45mm Height: 22mm Body material: technopolymer PA Plunger material: zinc plated steel Body colour: black Cap colour: red Mounting: screwed rod Manufacturer series: VTT-C-P |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||
|
DIN 7603-CU-33-39-A | ELESA+GANTER |
Category: SealsDescription: Gasket; copper; Thk: 2mm; Øint: 33mm; Øout: 39mm; DIN 7603 Type of mounting element: gasket Gasket material: copper Thickness: 2mm Internal diameter: 33mm Outside diameter: 39mm DIN standard: DIN 7603 |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||
|
DVA.4-70-40-M10-28-55 | ELESA+GANTER |
Category: FeetDescription: Vibroisolation foot; Ø: 70mm; H: 40mm; Shore hardness: 55±5; 3520N Type of mounting element: vibroisolation foot Diameter: 70mm Height: 40mm Shore hardness: 55±5 Static load: 3520N Stiffness: 1300N/mm Thread length: 28mm Plunger material: steel Foot material: rubber External thread: M10 |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||
|
DIN 172-B33,5-45-A | ELESA+GANTER |
Category: Indexing plungersDescription: Guide bushing; hardened steel; Øout: 48mm; Øint: 33.5mm; DIN 172 Type of mounting element: guide bushing Material: hardened steel Outside diameter: 48mm Internal diameter: 33.5mm Flange diameter: 52mm DIN standard: DIN 172 Length: 45mm |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||
| DVA.5-75-55-SST-M12-55 | ELESA+GANTER |
Category: Vibration DampersDescription: Vibroisolation foot; Ø: 75mm; Shore hardness: 55±5; H: 55mm Type of mounting element: vibroisolation foot Diameter: 75mm Shore hardness: 55±5 Height: 55mm Foot material: rubber Internal thread: M12 Boss material: stainless steel |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | |||
| DVA.4-50-35-M10-28-40 | ELESA+GANTER |
Category: Vibration DampersDescription: Vibroisolation foot; Ø: 50mm; Thread len: 28mm; steel; H: 35mm Type of mounting element: vibroisolation foot Diameter: 50mm Thread length: 28mm Shore hardness: 40±5 Plunger material: steel Height: 35mm Foot material: rubber External thread: M10 |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | |||
|
GN927-63-M5-A | ELESA+GANTER |
Category: Clamping LeversDescription: Lever; clamping; Thread len: 10mm; Lever length: 63mm; Body: black Type of mounting element: lever Kind of toggle: clamping Thread length: 10mm Lever length: 63mm Handle material: zinc die-cast Body colour: black Version: with regulation Internal thread: M5 |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||
| M.1043/20-700-EP | ELESA+GANTER |
Category: HandlesDescription: Holder; aluminium; black; H: 58mm; L: 720mm; Holes pitch: 700mm; oval Type of mounting element: holder Material: aluminium Colour: black Height: 58mm Length: 720mm Mounting holes pitch: 700mm Diameter: 20mm Plating material: epoxy resin Shape: oval Trade name: handle |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | |||
| GN 602.1-78-M8-32-RS | ELESA+GANTER |
Category: Clamping LeversDescription: Lever; adjustable; Thread len: 32mm; Lever length: 78mm; Body: red Type of mounting element: lever Kind of toggle: adjustable Thread length: 32mm Lever length: 78mm Knob height: 46mm Handle material: zinc die-cast Body colour: red Manufacturer series: GN 602.1 External thread: M8 Plunger material: stainless steel |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | |||
|
ERX.63 P-M6X16-C2 | ELESA+GANTER |
Category: Clamping LeversDescription: Lever; adjustable; Thread len: 16mm; Lever length: 63mm; -30÷130°C Type of mounting element: lever Kind of toggle: adjustable Thread length: 16mm Lever length: 63mm Knob height: 43mm Handle material: technopolymer PA Body colour: black Manufacturer series: ERGOSTYLE® External thread: M6 Plunger material: steel Actuator colour: orange Overall length: 72.5mm Resistance to: most of lubricants; most of oils; most of solvents Operating temperature: -30...130°C |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||
| GN 42-80-M8-63-A1-S | ELESA+GANTER |
Category: FeetDescription: Foot; Base dia: 80mm; M8; steel; Plunger length: 63mm; Plating: zinc Type of mounting element: foot Version: with fixing lug; with lever; with no-slip disk; without locknut; with regulation Base diameter: 80mm Thread: M8 Body material: steel Plunger length: 63mm Plating material: zinc |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | |||
|
TLA.Z-30/193.5+R | ELESA+GANTER |
Category: Clasps and LatchesDescription: Clasp; steel; Plating: zinc; W: 43mm; L: 193.5mm; 2000N Type of mounting element: clasp Body material: steel Plating material: zinc Width: 43mm Length: 193.5mm Holding force: 2000N |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||
| M.1043 BM/30-1000-SST | ELESA+GANTER |
Category: HandlesDescription: Holder; stainless steel; natural; H: 78mm; L: 1024mm; Ø: 30mm; oval Type of mounting element: holder Material: stainless steel Colour: natural Height: 78mm Length: 1024mm Mounting holes pitch: 1000mm Diameter: 30mm Shape: oval Trade name: handle Resistance to: scratch |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | |||
|
VTT.32-C-P-M8X16-C3 | ELESA+GANTER |
Category: KnobsDescription: Knob; Ø: 32mm; Ext.thread: M8; Int.thread: M8; 16mm; H: 22mm; Cap: grey Type of mounting element: knob Diameter: 32mm External thread: M8 Internal thread: M8 Thread length: 16mm Height: 22mm Body material: technopolymer PA Plunger material: zinc plated steel Body colour: black Cap colour: grey Mounting: screwed rod Manufacturer series: VTT-C-P |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||
|
DVC.1-35-31-15-M8-20-55 | ELESA+GANTER |
Category: Vibration DampersDescription: Vibration damper; M8; Ø: 35mm; rubber; L: 15mm; Thread len: 20mm Manufacturer series: DVC.1 Thread: M8 Body material: rubber Type of mounting element: vibration damper Mechanical elements features: with external threaded hole on both ends Plunger material: zinc plated steel Spacer length: 15mm Thread length: 20mm D1 dimension: 31mm Diameter: 35mm Shore hardness: 55±5 Stiffness: 559N/mm Static load: 2097N |
auf Bestellung 10 Stücke: Lieferzeit 14-21 Tag (e) |
|
||
|
430761 | ELESA+GANTER |
Category: Accesories for feetDescription: For feet fastening,for profiles; Body: black; H: 37mm; polyamide Operating temperature: -30...100°C Height: 37mm Body colour: black Application: for feet fastening; for profiles Resistance to: most of oils; most of solvents Thread: M8 Body material: polyamide Type of mounting element: stopper Internal parts material: steel Wall thickness: 1.5mm Length: 25mm Width: 25mm Static load: 3kN |
auf Bestellung 1 Stücke: Lieferzeit 14-21 Tag (e) |
|
||
| 451911 | ELESA+GANTER |
Category: WheelsDescription: Transport wheel; Ø: 125mm; W: 35mm; H: 156mm; torsional with lock Manufacturer series: RE.F5-N Body material: steel Type of mounting element: transport wheel Wheel width: 35mm Wheel diameter: 125mm Height: 156mm Dynamic load: 2.2kN Rolling load: 2.8kN Force: 285kg Material: aluminium; polyurethane Version: assembly pass through hole; hub with ball bearings; torsional with lock |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | |||
| 451916 | ELESA+GANTER |
Category: WheelsDescription: Transport wheel; Ø: 150mm; W: 40mm; H: 194mm; torsional with lock Manufacturer series: RE.F5-N Body material: steel Type of mounting element: transport wheel Wheel width: 40mm Wheel diameter: 150mm Height: 194mm Dynamic load: 3kN Rolling load: 3.3kN Force: 336kg Material: aluminium; polyurethane Version: assembly pass through hole; hub with ball bearings; torsional with lock |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | |||
|
VTT.32-C-P-M8X35-C17 | ELESA+GANTER |
Category: KnobsDescription: Knob; Ø: 32mm; Ext.thread: M8; Int.thread: M8; 35mm; H: 22mm; VTT-C-P Type of mounting element: knob Diameter: 32mm External thread: M8 Internal thread: M8 Thread length: 35mm Height: 22mm Body material: technopolymer PA Plunger material: zinc plated steel Body colour: black Cap colour: green Mounting: screwed rod Manufacturer series: VTT-C-P |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||
|
CFT.65 SH-6-C9 | ELESA+GANTER |
Category: HingesDescription: Hinge; Width: 63mm; technopolymer PA; black; H: 65mm; -20÷80°C Version: with screw-covers Type of mounting element: hinge Material: technopolymer PA Pin material: technopolymer POM Operating temperature: -20...80°C Panel cutout diameter: 6.5mm Width: 63mm Mounting holes pitch: 40/40mm Height: 65mm Colour: black |
auf Bestellung 2 Stücke: Lieferzeit 14-21 Tag (e) |
|
||
|
VCT.50 P-M12X50-C5 | ELESA+GANTER |
Category: KnobsDescription: Knob; Ø: 50mm; Ext.thread: M12; 50mm; H: 32mm; technopolymer PP Type of mounting element: knob Diameter: 50mm External thread: M12 Thread pitch: 1.75 Thread length: 50mm Height: 32mm Body material: technopolymer PP Plunger material: zinc plated steel Body colour: black Cap colour: blue |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||
| GN 822.7-7-M12X1,5-C | ELESA+GANTER |
Category: Locking pinsDescription: Mount.elem: indexing plungers; with rest position,with knob Type of mounting element: indexing plungers Version: with knob; with rest position Plunger material: stainless steel Plunger diameter: 7mm Thread: M12 Thread pitch: 1.5 Body material: technopolymer PA |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | |||
| GN 822.7-7-M12X1,5-CN | ELESA+GANTER |
Category: Locking pinsDescription: Mount.elem: indexing plungers; with rest position,with knob Type of mounting element: indexing plungers Version: with knob; with rest position Plunger material: stainless steel Plunger diameter: 7mm Thread: M12 Thread pitch: 1.5 Body material: stainless steel |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH |
| GN 439.5-38-M8-65-70 |
![]() |
Hersteller: ELESA+GANTER
Category: Feet
Description: Vibroisolation foot; Ø: 38mm; H: 20mm; Shore hardness: 70; 920N
Type of mounting element: vibroisolation foot
Diameter: 38mm
Height: 20mm
Shore hardness: 70
Static load: 920N
Thread length: 65mm
Plunger material: stainless steel
Foot material: rubber
External thread: M8
Category: Feet
Description: Vibroisolation foot; Ø: 38mm; H: 20mm; Shore hardness: 70; 920N
Type of mounting element: vibroisolation foot
Diameter: 38mm
Height: 20mm
Shore hardness: 70
Static load: 920N
Thread length: 65mm
Plunger material: stainless steel
Foot material: rubber
External thread: M8
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| CFSQ.60-SH-6-F-B-D-2 |
![]() |
Hersteller: ELESA+GANTER
Category: Hinge Safety Switches
Description: Safety switch: hinged; CFSQ; NC + NO; cables; 2m; 190°; PIN: 4; IP67
Type of safety switch: hinged
Manufacturer series: CFSQ
Contacts configuration: NC + NO
Connection: cables
Lead length: 2m
Mechanical rotation angle: 190°
Number of pins: 4
IP rating: IP67
Operating temperature: -25...80°C
Colour: matt black
Mechanical durability: 2000000 cycles
Category: Hinge Safety Switches
Description: Safety switch: hinged; CFSQ; NC + NO; cables; 2m; 190°; PIN: 4; IP67
Type of safety switch: hinged
Manufacturer series: CFSQ
Contacts configuration: NC + NO
Connection: cables
Lead length: 2m
Mechanical rotation angle: 190°
Number of pins: 4
IP rating: IP67
Operating temperature: -25...80°C
Colour: matt black
Mechanical durability: 2000000 cycles
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| 260262-C2 |
![]() |
Hersteller: ELESA+GANTER
Category: Handles
Description: Holder; polypropylene; black; H: 39mm; L: 144mm; W: 26mm; F2: 1kN
Type of mounting element: holder
Material: polypropylene
Colour: black
Height: 39mm
Length: 144mm
Cap colour: orange
Width: 26mm
Mounting: mounting hole without thread
F2 Force: 1kN
F1 Force: 1kN
Panel cutout diameter: 8mm
Trade name: handle
Category: Handles
Description: Holder; polypropylene; black; H: 39mm; L: 144mm; W: 26mm; F2: 1kN
Type of mounting element: holder
Material: polypropylene
Colour: black
Height: 39mm
Length: 144mm
Cap colour: orange
Width: 26mm
Mounting: mounting hole without thread
F2 Force: 1kN
F1 Force: 1kN
Panel cutout diameter: 8mm
Trade name: handle
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| GN 583-M30 |
![]() |
Hersteller: ELESA+GANTER
Category: Nuts
Description: Lifting eye nut; M30; 3.5; steel; Plating: epoxy resin; pink
Type of mounting element: lifting eye nut
Thread: M30
Thread pitch: 3.5
Material: steel
Plating material: epoxy resin
Colour: pink
Category: Nuts
Description: Lifting eye nut; M30; 3.5; steel; Plating: epoxy resin; pink
Type of mounting element: lifting eye nut
Thread: M30
Thread pitch: 3.5
Material: steel
Plating material: epoxy resin
Colour: pink
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| ISO 7379-16-M12-100-NI |
![]() |
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; A2 stainless steel; M12; 1.75; Thread len: 18mm
Type of mounting element: shoulder screw
Material: A2 stainless steel
Thread: M12
Thread pitch: 1.75
Thread length: 18mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 8mm
Head height: 11mm
Head diameter: 24mm
ISO standard: ISO 7379
Plunger length: 100mm
Plunger diameter: 16mm
Category: Shoulder Screws
Description: Shoulder screw; A2 stainless steel; M12; 1.75; Thread len: 18mm
Type of mounting element: shoulder screw
Material: A2 stainless steel
Thread: M12
Thread pitch: 1.75
Thread length: 18mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 8mm
Head height: 11mm
Head diameter: 24mm
ISO standard: ISO 7379
Plunger length: 100mm
Plunger diameter: 16mm
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| GN 751-14-56-M14-B |
![]() |
Hersteller: ELESA+GANTER
Category: Joints
Description: Fork joint; Øhole: 14mm; M14; 2; right hand thread,inside; steel
Type of mounting element: fork joint
Hole diameter: 14mm
Thread: M14
Thread pitch: 2
Kind of thread: inside; right hand thread
Material: steel
Length: 56mm
Plating material: zinc
DIN standard: DIN 71752
Category: Joints
Description: Fork joint; Øhole: 14mm; M14; 2; right hand thread,inside; steel
Type of mounting element: fork joint
Hole diameter: 14mm
Thread: M14
Thread pitch: 2
Kind of thread: inside; right hand thread
Material: steel
Length: 56mm
Plating material: zinc
DIN standard: DIN 71752
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| VTT.32-C-P-M6X45-C6 |
![]() |
Hersteller: ELESA+GANTER
Category: Knobs
Description: Knob; Ø: 32mm; Ext.thread: M6; Int.thread: M6; 45mm; H: 22mm; Cap: red
Type of mounting element: knob
Diameter: 32mm
External thread: M6
Internal thread: M6
Thread length: 45mm
Height: 22mm
Body material: technopolymer PA
Plunger material: zinc plated steel
Body colour: black
Cap colour: red
Mounting: screwed rod
Manufacturer series: VTT-C-P
Category: Knobs
Description: Knob; Ø: 32mm; Ext.thread: M6; Int.thread: M6; 45mm; H: 22mm; Cap: red
Type of mounting element: knob
Diameter: 32mm
External thread: M6
Internal thread: M6
Thread length: 45mm
Height: 22mm
Body material: technopolymer PA
Plunger material: zinc plated steel
Body colour: black
Cap colour: red
Mounting: screwed rod
Manufacturer series: VTT-C-P
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| DIN 7603-CU-33-39-A |
![]() |
Hersteller: ELESA+GANTER
Category: Seals
Description: Gasket; copper; Thk: 2mm; Øint: 33mm; Øout: 39mm; DIN 7603
Type of mounting element: gasket
Gasket material: copper
Thickness: 2mm
Internal diameter: 33mm
Outside diameter: 39mm
DIN standard: DIN 7603
Category: Seals
Description: Gasket; copper; Thk: 2mm; Øint: 33mm; Øout: 39mm; DIN 7603
Type of mounting element: gasket
Gasket material: copper
Thickness: 2mm
Internal diameter: 33mm
Outside diameter: 39mm
DIN standard: DIN 7603
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| DVA.4-70-40-M10-28-55 |
![]() |
Hersteller: ELESA+GANTER
Category: Feet
Description: Vibroisolation foot; Ø: 70mm; H: 40mm; Shore hardness: 55±5; 3520N
Type of mounting element: vibroisolation foot
Diameter: 70mm
Height: 40mm
Shore hardness: 55±5
Static load: 3520N
Stiffness: 1300N/mm
Thread length: 28mm
Plunger material: steel
Foot material: rubber
External thread: M10
Category: Feet
Description: Vibroisolation foot; Ø: 70mm; H: 40mm; Shore hardness: 55±5; 3520N
Type of mounting element: vibroisolation foot
Diameter: 70mm
Height: 40mm
Shore hardness: 55±5
Static load: 3520N
Stiffness: 1300N/mm
Thread length: 28mm
Plunger material: steel
Foot material: rubber
External thread: M10
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| DIN 172-B33,5-45-A |
![]() |
Hersteller: ELESA+GANTER
Category: Indexing plungers
Description: Guide bushing; hardened steel; Øout: 48mm; Øint: 33.5mm; DIN 172
Type of mounting element: guide bushing
Material: hardened steel
Outside diameter: 48mm
Internal diameter: 33.5mm
Flange diameter: 52mm
DIN standard: DIN 172
Length: 45mm
Category: Indexing plungers
Description: Guide bushing; hardened steel; Øout: 48mm; Øint: 33.5mm; DIN 172
Type of mounting element: guide bushing
Material: hardened steel
Outside diameter: 48mm
Internal diameter: 33.5mm
Flange diameter: 52mm
DIN standard: DIN 172
Length: 45mm
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| DVA.5-75-55-SST-M12-55 |
![]() |
Hersteller: ELESA+GANTER
Category: Vibration Dampers
Description: Vibroisolation foot; Ø: 75mm; Shore hardness: 55±5; H: 55mm
Type of mounting element: vibroisolation foot
Diameter: 75mm
Shore hardness: 55±5
Height: 55mm
Foot material: rubber
Internal thread: M12
Boss material: stainless steel
Category: Vibration Dampers
Description: Vibroisolation foot; Ø: 75mm; Shore hardness: 55±5; H: 55mm
Type of mounting element: vibroisolation foot
Diameter: 75mm
Shore hardness: 55±5
Height: 55mm
Foot material: rubber
Internal thread: M12
Boss material: stainless steel
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| DVA.4-50-35-M10-28-40 |
![]() |
Hersteller: ELESA+GANTER
Category: Vibration Dampers
Description: Vibroisolation foot; Ø: 50mm; Thread len: 28mm; steel; H: 35mm
Type of mounting element: vibroisolation foot
Diameter: 50mm
Thread length: 28mm
Shore hardness: 40±5
Plunger material: steel
Height: 35mm
Foot material: rubber
External thread: M10
Category: Vibration Dampers
Description: Vibroisolation foot; Ø: 50mm; Thread len: 28mm; steel; H: 35mm
Type of mounting element: vibroisolation foot
Diameter: 50mm
Thread length: 28mm
Shore hardness: 40±5
Plunger material: steel
Height: 35mm
Foot material: rubber
External thread: M10
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| GN927-63-M5-A |
![]() |
Hersteller: ELESA+GANTER
Category: Clamping Levers
Description: Lever; clamping; Thread len: 10mm; Lever length: 63mm; Body: black
Type of mounting element: lever
Kind of toggle: clamping
Thread length: 10mm
Lever length: 63mm
Handle material: zinc die-cast
Body colour: black
Version: with regulation
Internal thread: M5
Category: Clamping Levers
Description: Lever; clamping; Thread len: 10mm; Lever length: 63mm; Body: black
Type of mounting element: lever
Kind of toggle: clamping
Thread length: 10mm
Lever length: 63mm
Handle material: zinc die-cast
Body colour: black
Version: with regulation
Internal thread: M5
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| M.1043/20-700-EP |
![]() |
Hersteller: ELESA+GANTER
Category: Handles
Description: Holder; aluminium; black; H: 58mm; L: 720mm; Holes pitch: 700mm; oval
Type of mounting element: holder
Material: aluminium
Colour: black
Height: 58mm
Length: 720mm
Mounting holes pitch: 700mm
Diameter: 20mm
Plating material: epoxy resin
Shape: oval
Trade name: handle
Category: Handles
Description: Holder; aluminium; black; H: 58mm; L: 720mm; Holes pitch: 700mm; oval
Type of mounting element: holder
Material: aluminium
Colour: black
Height: 58mm
Length: 720mm
Mounting holes pitch: 700mm
Diameter: 20mm
Plating material: epoxy resin
Shape: oval
Trade name: handle
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| GN 602.1-78-M8-32-RS |
![]() |
Hersteller: ELESA+GANTER
Category: Clamping Levers
Description: Lever; adjustable; Thread len: 32mm; Lever length: 78mm; Body: red
Type of mounting element: lever
Kind of toggle: adjustable
Thread length: 32mm
Lever length: 78mm
Knob height: 46mm
Handle material: zinc die-cast
Body colour: red
Manufacturer series: GN 602.1
External thread: M8
Plunger material: stainless steel
Category: Clamping Levers
Description: Lever; adjustable; Thread len: 32mm; Lever length: 78mm; Body: red
Type of mounting element: lever
Kind of toggle: adjustable
Thread length: 32mm
Lever length: 78mm
Knob height: 46mm
Handle material: zinc die-cast
Body colour: red
Manufacturer series: GN 602.1
External thread: M8
Plunger material: stainless steel
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| ERX.63 P-M6X16-C2 |
![]() |
Hersteller: ELESA+GANTER
Category: Clamping Levers
Description: Lever; adjustable; Thread len: 16mm; Lever length: 63mm; -30÷130°C
Type of mounting element: lever
Kind of toggle: adjustable
Thread length: 16mm
Lever length: 63mm
Knob height: 43mm
Handle material: technopolymer PA
Body colour: black
Manufacturer series: ERGOSTYLE®
External thread: M6
Plunger material: steel
Actuator colour: orange
Overall length: 72.5mm
Resistance to: most of lubricants; most of oils; most of solvents
Operating temperature: -30...130°C
Category: Clamping Levers
Description: Lever; adjustable; Thread len: 16mm; Lever length: 63mm; -30÷130°C
Type of mounting element: lever
Kind of toggle: adjustable
Thread length: 16mm
Lever length: 63mm
Knob height: 43mm
Handle material: technopolymer PA
Body colour: black
Manufacturer series: ERGOSTYLE®
External thread: M6
Plunger material: steel
Actuator colour: orange
Overall length: 72.5mm
Resistance to: most of lubricants; most of oils; most of solvents
Operating temperature: -30...130°C
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| GN 42-80-M8-63-A1-S |
![]() |
Hersteller: ELESA+GANTER
Category: Feet
Description: Foot; Base dia: 80mm; M8; steel; Plunger length: 63mm; Plating: zinc
Type of mounting element: foot
Version: with fixing lug; with lever; with no-slip disk; without locknut; with regulation
Base diameter: 80mm
Thread: M8
Body material: steel
Plunger length: 63mm
Plating material: zinc
Category: Feet
Description: Foot; Base dia: 80mm; M8; steel; Plunger length: 63mm; Plating: zinc
Type of mounting element: foot
Version: with fixing lug; with lever; with no-slip disk; without locknut; with regulation
Base diameter: 80mm
Thread: M8
Body material: steel
Plunger length: 63mm
Plating material: zinc
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| TLA.Z-30/193.5+R |
![]() |
Hersteller: ELESA+GANTER
Category: Clasps and Latches
Description: Clasp; steel; Plating: zinc; W: 43mm; L: 193.5mm; 2000N
Type of mounting element: clasp
Body material: steel
Plating material: zinc
Width: 43mm
Length: 193.5mm
Holding force: 2000N
Category: Clasps and Latches
Description: Clasp; steel; Plating: zinc; W: 43mm; L: 193.5mm; 2000N
Type of mounting element: clasp
Body material: steel
Plating material: zinc
Width: 43mm
Length: 193.5mm
Holding force: 2000N
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| M.1043 BM/30-1000-SST |
![]() |
Hersteller: ELESA+GANTER
Category: Handles
Description: Holder; stainless steel; natural; H: 78mm; L: 1024mm; Ø: 30mm; oval
Type of mounting element: holder
Material: stainless steel
Colour: natural
Height: 78mm
Length: 1024mm
Mounting holes pitch: 1000mm
Diameter: 30mm
Shape: oval
Trade name: handle
Resistance to: scratch
Category: Handles
Description: Holder; stainless steel; natural; H: 78mm; L: 1024mm; Ø: 30mm; oval
Type of mounting element: holder
Material: stainless steel
Colour: natural
Height: 78mm
Length: 1024mm
Mounting holes pitch: 1000mm
Diameter: 30mm
Shape: oval
Trade name: handle
Resistance to: scratch
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| VTT.32-C-P-M8X16-C3 |
![]() |
Hersteller: ELESA+GANTER
Category: Knobs
Description: Knob; Ø: 32mm; Ext.thread: M8; Int.thread: M8; 16mm; H: 22mm; Cap: grey
Type of mounting element: knob
Diameter: 32mm
External thread: M8
Internal thread: M8
Thread length: 16mm
Height: 22mm
Body material: technopolymer PA
Plunger material: zinc plated steel
Body colour: black
Cap colour: grey
Mounting: screwed rod
Manufacturer series: VTT-C-P
Category: Knobs
Description: Knob; Ø: 32mm; Ext.thread: M8; Int.thread: M8; 16mm; H: 22mm; Cap: grey
Type of mounting element: knob
Diameter: 32mm
External thread: M8
Internal thread: M8
Thread length: 16mm
Height: 22mm
Body material: technopolymer PA
Plunger material: zinc plated steel
Body colour: black
Cap colour: grey
Mounting: screwed rod
Manufacturer series: VTT-C-P
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| DVC.1-35-31-15-M8-20-55 |
![]() |
Hersteller: ELESA+GANTER
Category: Vibration Dampers
Description: Vibration damper; M8; Ø: 35mm; rubber; L: 15mm; Thread len: 20mm
Manufacturer series: DVC.1
Thread: M8
Body material: rubber
Type of mounting element: vibration damper
Mechanical elements features: with external threaded hole on both ends
Plunger material: zinc plated steel
Spacer length: 15mm
Thread length: 20mm
D1 dimension: 31mm
Diameter: 35mm
Shore hardness: 55±5
Stiffness: 559N/mm
Static load: 2097N
Category: Vibration Dampers
Description: Vibration damper; M8; Ø: 35mm; rubber; L: 15mm; Thread len: 20mm
Manufacturer series: DVC.1
Thread: M8
Body material: rubber
Type of mounting element: vibration damper
Mechanical elements features: with external threaded hole on both ends
Plunger material: zinc plated steel
Spacer length: 15mm
Thread length: 20mm
D1 dimension: 31mm
Diameter: 35mm
Shore hardness: 55±5
Stiffness: 559N/mm
Static load: 2097N
auf Bestellung 10 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 10+ | 7.15 EUR |
| 430761 |
![]() |
Hersteller: ELESA+GANTER
Category: Accesories for feet
Description: For feet fastening,for profiles; Body: black; H: 37mm; polyamide
Operating temperature: -30...100°C
Height: 37mm
Body colour: black
Application: for feet fastening; for profiles
Resistance to: most of oils; most of solvents
Thread: M8
Body material: polyamide
Type of mounting element: stopper
Internal parts material: steel
Wall thickness: 1.5mm
Length: 25mm
Width: 25mm
Static load: 3kN
Category: Accesories for feet
Description: For feet fastening,for profiles; Body: black; H: 37mm; polyamide
Operating temperature: -30...100°C
Height: 37mm
Body colour: black
Application: for feet fastening; for profiles
Resistance to: most of oils; most of solvents
Thread: M8
Body material: polyamide
Type of mounting element: stopper
Internal parts material: steel
Wall thickness: 1.5mm
Length: 25mm
Width: 25mm
Static load: 3kN
auf Bestellung 1 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 1+ | 71.5 EUR |
| 451911 |
![]() |
Hersteller: ELESA+GANTER
Category: Wheels
Description: Transport wheel; Ø: 125mm; W: 35mm; H: 156mm; torsional with lock
Manufacturer series: RE.F5-N
Body material: steel
Type of mounting element: transport wheel
Wheel width: 35mm
Wheel diameter: 125mm
Height: 156mm
Dynamic load: 2.2kN
Rolling load: 2.8kN
Force: 285kg
Material: aluminium; polyurethane
Version: assembly pass through hole; hub with ball bearings; torsional with lock
Category: Wheels
Description: Transport wheel; Ø: 125mm; W: 35mm; H: 156mm; torsional with lock
Manufacturer series: RE.F5-N
Body material: steel
Type of mounting element: transport wheel
Wheel width: 35mm
Wheel diameter: 125mm
Height: 156mm
Dynamic load: 2.2kN
Rolling load: 2.8kN
Force: 285kg
Material: aluminium; polyurethane
Version: assembly pass through hole; hub with ball bearings; torsional with lock
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| 451916 |
![]() |
Hersteller: ELESA+GANTER
Category: Wheels
Description: Transport wheel; Ø: 150mm; W: 40mm; H: 194mm; torsional with lock
Manufacturer series: RE.F5-N
Body material: steel
Type of mounting element: transport wheel
Wheel width: 40mm
Wheel diameter: 150mm
Height: 194mm
Dynamic load: 3kN
Rolling load: 3.3kN
Force: 336kg
Material: aluminium; polyurethane
Version: assembly pass through hole; hub with ball bearings; torsional with lock
Category: Wheels
Description: Transport wheel; Ø: 150mm; W: 40mm; H: 194mm; torsional with lock
Manufacturer series: RE.F5-N
Body material: steel
Type of mounting element: transport wheel
Wheel width: 40mm
Wheel diameter: 150mm
Height: 194mm
Dynamic load: 3kN
Rolling load: 3.3kN
Force: 336kg
Material: aluminium; polyurethane
Version: assembly pass through hole; hub with ball bearings; torsional with lock
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| VTT.32-C-P-M8X35-C17 |
![]() |
Hersteller: ELESA+GANTER
Category: Knobs
Description: Knob; Ø: 32mm; Ext.thread: M8; Int.thread: M8; 35mm; H: 22mm; VTT-C-P
Type of mounting element: knob
Diameter: 32mm
External thread: M8
Internal thread: M8
Thread length: 35mm
Height: 22mm
Body material: technopolymer PA
Plunger material: zinc plated steel
Body colour: black
Cap colour: green
Mounting: screwed rod
Manufacturer series: VTT-C-P
Category: Knobs
Description: Knob; Ø: 32mm; Ext.thread: M8; Int.thread: M8; 35mm; H: 22mm; VTT-C-P
Type of mounting element: knob
Diameter: 32mm
External thread: M8
Internal thread: M8
Thread length: 35mm
Height: 22mm
Body material: technopolymer PA
Plunger material: zinc plated steel
Body colour: black
Cap colour: green
Mounting: screwed rod
Manufacturer series: VTT-C-P
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| CFT.65 SH-6-C9 |
![]() |
Hersteller: ELESA+GANTER
Category: Hinges
Description: Hinge; Width: 63mm; technopolymer PA; black; H: 65mm; -20÷80°C
Version: with screw-covers
Type of mounting element: hinge
Material: technopolymer PA
Pin material: technopolymer POM
Operating temperature: -20...80°C
Panel cutout diameter: 6.5mm
Width: 63mm
Mounting holes pitch: 40/40mm
Height: 65mm
Colour: black
Category: Hinges
Description: Hinge; Width: 63mm; technopolymer PA; black; H: 65mm; -20÷80°C
Version: with screw-covers
Type of mounting element: hinge
Material: technopolymer PA
Pin material: technopolymer POM
Operating temperature: -20...80°C
Panel cutout diameter: 6.5mm
Width: 63mm
Mounting holes pitch: 40/40mm
Height: 65mm
Colour: black
auf Bestellung 2 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 2+ | 35.75 EUR |
| VCT.50 P-M12X50-C5 |
![]() |
Hersteller: ELESA+GANTER
Category: Knobs
Description: Knob; Ø: 50mm; Ext.thread: M12; 50mm; H: 32mm; technopolymer PP
Type of mounting element: knob
Diameter: 50mm
External thread: M12
Thread pitch: 1.75
Thread length: 50mm
Height: 32mm
Body material: technopolymer PP
Plunger material: zinc plated steel
Body colour: black
Cap colour: blue
Category: Knobs
Description: Knob; Ø: 50mm; Ext.thread: M12; 50mm; H: 32mm; technopolymer PP
Type of mounting element: knob
Diameter: 50mm
External thread: M12
Thread pitch: 1.75
Thread length: 50mm
Height: 32mm
Body material: technopolymer PP
Plunger material: zinc plated steel
Body colour: black
Cap colour: blue
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| GN 822.7-7-M12X1,5-C |
![]() |
Hersteller: ELESA+GANTER
Category: Locking pins
Description: Mount.elem: indexing plungers; with rest position,with knob
Type of mounting element: indexing plungers
Version: with knob; with rest position
Plunger material: stainless steel
Plunger diameter: 7mm
Thread: M12
Thread pitch: 1.5
Body material: technopolymer PA
Category: Locking pins
Description: Mount.elem: indexing plungers; with rest position,with knob
Type of mounting element: indexing plungers
Version: with knob; with rest position
Plunger material: stainless steel
Plunger diameter: 7mm
Thread: M12
Thread pitch: 1.5
Body material: technopolymer PA
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| GN 822.7-7-M12X1,5-CN |
![]() |
Hersteller: ELESA+GANTER
Category: Locking pins
Description: Mount.elem: indexing plungers; with rest position,with knob
Type of mounting element: indexing plungers
Version: with knob; with rest position
Plunger material: stainless steel
Plunger diameter: 7mm
Thread: M12
Thread pitch: 1.5
Body material: stainless steel
Category: Locking pins
Description: Mount.elem: indexing plungers; with rest position,with knob
Type of mounting element: indexing plungers
Version: with knob; with rest position
Plunger material: stainless steel
Plunger diameter: 7mm
Thread: M12
Thread pitch: 1.5
Body material: stainless steel
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH


















