Produkte > ELESA+GANTER > Alle Produkte des Herstellers ELESA+GANTER (5005) > Seite 48 nach 84
| Foto | Bezeichnung | Hersteller | Beschreibung | Verfügbarkeit | Preis | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|   | GN 55.2-ND-15-3 | ELESA+GANTER |  Category: Magnets Description: Magnet: permanent; neodymium; 28N; Ø: 15mm; H: 3mm Type of magnet: permanent Height: 3mm Diameter: 15mm Force: 28N Magnetic material: neodymium | auf Bestellung 3 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | GN 50.5-ND-32 | ELESA+GANTER |  Category: Magnets Description: Magnet: permanent; neodymium; 330N; Ø: 32mm; H: 7mm; steel Internal thread: M5 Magnetic material: neodymium Type of magnet: permanent Enclosure material: steel Thread length: 3mm Height: 7mm Diameter: 32mm Force: 330N | auf Bestellung 4 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | GN 55.2-ND-8-2 | ELESA+GANTER |  Category: Magnets Description: Magnet: permanent; neodymium; 7N; Ø: 8mm; H: 2mm Type of magnet: permanent Height: 2mm Diameter: 8mm Force: 7N Magnetic material: neodymium | auf Bestellung 16 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | 451472 | ELESA+GANTER |  Category: Wheels Description: Transport wheel; Ø: 300mm; W: 80mm; H: 365mm; permanent; 611kg; steel Manufacturer series: RE.F4-WEH Body material: steel Wheel width: 80mm Wheel diameter: 300mm Height: 365mm Shore hardness: 95 Rolling load: 6kN Dynamic load: 23kN Force: 611kg Material: cast iron; polyurethane Version: hub with ball bearings; permanent; with mounting plate Type of mounting element: transport wheel | Produkt ist nicht verfügbar | Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|   | GN 50.4-HF-20 | ELESA+GANTER |  Category: Magnets Description: Magnet: permanent; hard ferrite; 27N; Ø: 20mm; H: 6mm; steel Type of magnet: permanent Enclosure material: steel Version: with a hole for screw mounting Height: 6mm Diameter: 20mm Mounting hole diameter: 4.1mm Force: 27N Magnetic material: hard ferrite | auf Bestellung 9 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | CFM.40 SH-5 | ELESA+GANTER |  Category: Hinges Description: Hinge; Width: 40mm; technopolymer PA; black; H: 40mm Version: pass-through holes for countersunk head screws Type of mounting element: hinge Pin material: stainless steel Panel cutout diameter: 5.5mm Height: 40mm Mounting holes pitch: 25/25mm Width: 40mm Material: technopolymer PA Colour: black | auf Bestellung 103 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | VTT.32-C-P-M6X16-C17 | ELESA+GANTER |  Category: Knobs Description: Knob; Ø: 32mm; Ext.thread: M6; Int.thread: M6; 16mm; H: 22mm; VTT-C-P Cap colour: green Body material: technopolymer PA Type of mounting element: knob Manufacturer series: VTT-C-P Internal thread: M6 External thread: M6 Mounting: screwed rod Plunger material: zinc plated steel Height: 22mm Thread length: 16mm Diameter: 32mm Body colour: black | auf Bestellung 3 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | 550809 | ELESA+GANTER |  Category: Mechanical Power Transmission Description: Spur gear; whell width: 45mm; Ø: 54mm; Number of teeth: 16; ZCL Type of mounting element: spur gear Wheel width: 45mm Wheel diameter: 54mm Number of teeth: 16 Material: technopolymer PA Version: hub with pass-through hole Manufacturer series: ZCL Module: 3 Panel cutout diameter: 12mm Kind of material: fiber glass reinforced | Produkt ist nicht verfügbar | Im Einkaufswagen Stück im Wert von UAH | ||||||||||
| DVA.3-150-55-M20-70 | ELESA+GANTER |  Category: Vibration Dampers Description: Vibration damper; M20; Ø: 150mm; rubber; L: 55mm; steel Type of mounting element: vibration damper Diameter: 150mm Plunger material: steel Spacer length: 55mm Shore hardness: 70±5 Thread: M20 Body material: rubber | Produkt ist nicht verfügbar | Im Einkaufswagen Stück im Wert von UAH | |||||||||||
|   | GN 235-NI-55-55-HB-GS | ELESA+GANTER |  Category: Hinges Description: Hinge; Width: 55mm; stainless steel; H: 55mm; adjustable Material: stainless steel Width: 55mm Type of mounting element: hinge Height: 55mm Version: adjustable | auf Bestellung 1 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | 8351 | ELESA+GANTER |  Category: Knobs Description: Knob wing; Int.thread: M6; 8mm; H: 15mm; polyamide; W: 30mm Type of mounting element: knob wing Internal thread: M6 Thread length: 8mm Height: 15mm Body material: polyamide Width: 30mm Body colour: black Boss material: brass Resistance to: most of oils | auf Bestellung 21 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | ISO 7379-4-M3-6 | ELESA+GANTER |  Category: Shoulder Screws Description: Shoulder screw; steel; M3; 0.5; Thread len: 7mm; hex key; HEX 2mm Type of mounting element: shoulder screw Material: steel Thread: M3 Thread pitch: 0.5 Thread length: 7mm Kind of head: cheese head; knurled Kind of cut: hex key Cut size: HEX 2mm Head height: 3mm Head diameter: 7mm ISO standard: ISO 7379 Plunger length: 6mm Plunger diameter: 4mm Plating material: black finish Strength class: 12.9 | auf Bestellung 57 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | ISO 7379-8-M6-16 | ELESA+GANTER |  Category: Shoulder Screws Description: Shoulder screw; steel; M6; 1; Thread len: 11mm; hex key; HEX 4mm Type of mounting element: shoulder screw Material: steel Thread: M6 Thread pitch: 1 Thread length: 11mm Kind of head: cheese head; knurled Kind of cut: hex key Cut size: HEX 4mm Head height: 5.5mm Head diameter: 13mm ISO standard: ISO 7379 Plunger length: 16mm Plunger diameter: 8mm Plating material: black finish Strength class: 12.9 | auf Bestellung 153 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | ISO 7379-8-M6-30 | ELESA+GANTER |  Category: Shoulder Screws Description: Shoulder screw; steel; M6; 1; Thread len: 11mm; hex key; HEX 4mm Type of mounting element: shoulder screw Material: steel Thread: M6 Thread pitch: 1 Thread length: 11mm Kind of head: cheese head; knurled Kind of cut: hex key Cut size: HEX 4mm Head height: 5.5mm Head diameter: 13mm ISO standard: ISO 7379 Plunger length: 30mm Plunger diameter: 8mm Plating material: black finish Strength class: 12.9 | auf Bestellung 264 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | ISO 7379-6-M5-10 | ELESA+GANTER |  Category: Shoulder Screws Description: Shoulder screw; steel; M5; 0.8; Thread len: 9.5mm; hex key; HEX 3mm Type of mounting element: shoulder screw Material: steel Thread: M5 Thread pitch: 0.8 Thread length: 9.5mm Kind of head: cheese head; knurled Kind of cut: hex key Cut size: HEX 3mm Head height: 4.5mm Head diameter: 10mm ISO standard: ISO 7379 Plunger length: 10mm Plunger diameter: 6mm Plating material: black finish Strength class: 12.9 | auf Bestellung 99 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | ISO 7379-6-M5-16 | ELESA+GANTER |  Category: Shoulder Screws Description: Shoulder screw; steel; M5; 0.8; Thread len: 9.5mm; hex key; HEX 3mm Type of mounting element: shoulder screw Material: steel Thread: M5 Thread pitch: 0.8 Thread length: 9.5mm Kind of head: cheese head; knurled Kind of cut: hex key Cut size: HEX 3mm Head height: 4.5mm Head diameter: 10mm ISO standard: ISO 7379 Plunger length: 16mm Plunger diameter: 6mm Plating material: black finish Strength class: 12.9 | auf Bestellung 146 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | ISO 7379-6-M5-20 | ELESA+GANTER |  Category: Shoulder Screws Description: Shoulder screw; steel; M5; 0.8; Thread len: 9.5mm; hex key; HEX 3mm Type of mounting element: shoulder screw Material: steel Thread: M5 Thread pitch: 0.8 Thread length: 9.5mm Kind of head: cheese head; knurled Kind of cut: hex key Cut size: HEX 3mm Head height: 4.5mm Head diameter: 10mm ISO standard: ISO 7379 Plunger length: 20mm Plunger diameter: 6mm Plating material: black finish Strength class: 12.9 | auf Bestellung 36 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | ISO 7379-10-M8-40 | ELESA+GANTER |  Category: Shoulder Screws Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm Type of mounting element: shoulder screw Material: steel Thread: M8 Thread pitch: 1.25 Thread length: 13mm Kind of head: cheese head; knurled Kind of cut: hex key Cut size: HEX 5mm Head height: 7mm Head diameter: 16mm ISO standard: ISO 7379 Plunger length: 40mm Plunger diameter: 10mm Plating material: black finish Strength class: 12.9 | auf Bestellung 103 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | ISO 7379-5-M4-8 | ELESA+GANTER |  Category: Shoulder Screws Description: Shoulder screw; steel; M4; 0.7; Thread len: 8mm; hex key; HEX 2.5mm Type of mounting element: shoulder screw Material: steel Thread: M4 Thread pitch: 0.7 Thread length: 8mm Kind of head: cheese head; knurled Kind of cut: hex key Cut size: HEX 2.5mm Head height: 4mm Head diameter: 9mm ISO standard: ISO 7379 Plunger length: 8mm Plunger diameter: 5mm Plating material: black finish Strength class: 12.9 | auf Bestellung 37 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | ISO 7379-6-M5-12 | ELESA+GANTER |  Category: Shoulder Screws Description: Shoulder screw; steel; M5; 0.8; Thread len: 9.5mm; hex key; HEX 3mm Type of mounting element: shoulder screw Material: steel Thread: M5 Thread pitch: 0.8 Thread length: 9.5mm Kind of head: cheese head; knurled Kind of cut: hex key Cut size: HEX 3mm Head height: 4.5mm Head diameter: 10mm ISO standard: ISO 7379 Plunger length: 12mm Plunger diameter: 6mm Plating material: black finish Strength class: 12.9 | auf Bestellung 67 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | ISO 7379-5-M4-5 | ELESA+GANTER |  Category: Shoulder Screws Description: Shoulder screw; steel; M4; 0.7; Thread len: 8mm; hex key; HEX 2.5mm Type of mounting element: shoulder screw Material: steel Thread: M4 Thread pitch: 0.7 Thread length: 8mm Kind of head: cheese head; knurled Kind of cut: hex key Cut size: HEX 2.5mm Head height: 4mm Head diameter: 9mm ISO standard: ISO 7379 Plunger length: 5mm Plunger diameter: 5mm Plating material: black finish Strength class: 12.9 | auf Bestellung 61 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | ISO 7379-10-M8-16 | ELESA+GANTER |  Category: Shoulder Screws Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm Type of mounting element: shoulder screw Material: steel Thread: M8 Thread pitch: 1.25 Thread length: 13mm Kind of head: cheese head; knurled Kind of cut: hex key Cut size: HEX 5mm Head height: 7mm Head diameter: 16mm ISO standard: ISO 7379 Plunger length: 16mm Plunger diameter: 10mm Plating material: black finish Strength class: 12.9 | auf Bestellung 49 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | ISO 7379-10-M8-20 | ELESA+GANTER |  Category: Shoulder Screws Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm Type of mounting element: shoulder screw Material: steel Thread: M8 Thread pitch: 1.25 Thread length: 13mm Kind of head: cheese head; knurled Kind of cut: hex key Cut size: HEX 5mm Head height: 7mm Head diameter: 16mm ISO standard: ISO 7379 Plunger length: 20mm Plunger diameter: 10mm Plating material: black finish Strength class: 12.9 | auf Bestellung 28 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | ISO 7379-6-M5-25 | ELESA+GANTER |  Category: Shoulder Screws Description: Shoulder screw; steel; M5; 0.8; Thread len: 9.5mm; hex key; HEX 3mm Type of mounting element: shoulder screw Material: steel Thread: M5 Thread pitch: 0.8 Thread length: 9.5mm Kind of head: cheese head; knurled Kind of cut: hex key Cut size: HEX 3mm Head height: 4.5mm Head diameter: 10mm ISO standard: ISO 7379 Plunger length: 25mm Plunger diameter: 6mm Plating material: black finish Strength class: 12.9 | auf Bestellung 58 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | ISO 7379-5-M4-12 | ELESA+GANTER |  Category: Shoulder Screws Description: Shoulder screw; steel; M4; 0.7; Thread len: 8mm; hex key; HEX 2.5mm Type of mounting element: shoulder screw Material: steel Thread: M4 Thread pitch: 0.7 Thread length: 8mm Kind of head: cheese head; knurled Kind of cut: hex key Cut size: HEX 2.5mm Head height: 4mm Head diameter: 9mm ISO standard: ISO 7379 Plunger length: 12mm Plunger diameter: 5mm Plating material: black finish Strength class: 12.9 | auf Bestellung 69 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | GN 2282-MSW-57-G-50-1 | ELESA+GANTER |  Category: Handwheels and pointers Description: Spirit level; viewing window top; H: 13mm; Ømount.hole: 4.5mm Height: 13mm Version: viewing window top Type of mounting element: spirit level Mechanical mounting: screw Panel cutout diameter: 4.5mm Length: 37mm Mounting holes pitch: 45mm Base dimensions: 57x12mm Body material: brass Body colour: black | auf Bestellung 8 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | GN 2282-MSW-57-G-50-3 | ELESA+GANTER |  Category: Handwheels and pointers Description: Spirit level; viewing window top-front-back; H: 13mm; brass Height: 13mm Version: viewing window top - front - back Type of mounting element: spirit level Mechanical mounting: screw Panel cutout diameter: 4.5mm Length: 37mm Mounting holes pitch: 45mm Base dimensions: 57x12mm Body material: brass Body colour: black | auf Bestellung 5 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | GN 2282-MSW-57-G-6-2 | ELESA+GANTER |  Category: Handwheels and pointers Description: Spirit level; viewing window top-front; H: 13mm; brass; screw Height: 13mm Version: viewing window top - front Type of mounting element: spirit level Mechanical mounting: screw Panel cutout diameter: 4.5mm Length: 37mm Mounting holes pitch: 45mm Base dimensions: 57x12mm Body material: brass Body colour: black | auf Bestellung 2 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | GN 50.4-HF-80-M10 | ELESA+GANTER |  Category: Magnets Description: Magnet: permanent; hard ferrite; 540N; Ø: 80mm; H: 18mm; steel Version: with a hole for screw mounting Magnetic material: hard ferrite Internal thread: M10 Type of magnet: permanent Enclosure material: steel Height: 18mm Diameter: 80mm Force: 540N | Produkt ist nicht verfügbar | Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|   | VCT.40 P-M8X35 | ELESA+GANTER |  Category: Knobs Description: Knob; Ø: 40mm; Ext.thread: M8; 35mm; H: 27mm; technopolymer PP Type of mounting element: knob Diameter: 40mm Thread length: 35mm Height: 27mm Body material: technopolymer PP Body colour: black Plunger material: zinc plated steel Thread pitch: 1.25 Cap colour: black External thread: M8 | auf Bestellung 102 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | 37005 | ELESA+GANTER |  Category: Handles Description: Holder; technopolymer PA; red; H: 38mm; L: 109mm; W: 21mm; F2: 2.5kN Height: 38mm Colour: red Trade name: handle Type of mounting element: holder Material: technopolymer PA Width: 21mm Panel cutout diameter: 6.5mm Mounting holes pitch: 93.5mm Length: 109mm F2 Force: 2.5kN F1 Force: 3.5kN | auf Bestellung 20 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
| 2242-15-B5-5-AL-KU | ELESA+GANTER |  Category: Encoders Description: Coupling; Ø: 15mm; Ø1: 5mm; Ø2: 5mm; aluminium Diameter: 15mm Material: aluminium Type of sensors accessories: coupling Assembly hole 1 diameter: 5mm Assembly hole 2 diameter: 5mm | Produkt ist nicht verfügbar | Im Einkaufswagen Stück im Wert von UAH | |||||||||||
| 2242-15-B4-5-AL-KU | ELESA+GANTER |  Category: Encoders Description: Coupling; Ø: 15mm; Ø1: 4mm; Ø2: 5mm; aluminium Diameter: 15mm Material: aluminium Type of sensors accessories: coupling Assembly hole 1 diameter: 4mm Assembly hole 2 diameter: 5mm | Produkt ist nicht verfügbar | Im Einkaufswagen Stück im Wert von UAH | |||||||||||
| 2242-15-B5-6-AL-KU | ELESA+GANTER |  Category: Encoders Description: Coupling; Ø: 15mm; Ø1: 5mm; Ø2: 6mm; aluminium Diameter: 15mm Material: aluminium Type of sensors accessories: coupling Assembly hole 1 diameter: 5mm Assembly hole 2 diameter: 6mm | Produkt ist nicht verfügbar | Im Einkaufswagen Stück im Wert von UAH | |||||||||||
| GN 300.1-30-M5-50-RS | ELESA+GANTER |  Category: Clamping Levers Description: Lever; adjustable; Thread len: 50mm; Lever length: 30mm; Body: red Body colour: red Type of mounting element: lever External thread: M5 Plunger material: stainless steel Handle material: zinc die-cast Knob height: 31mm Lever length: 30mm Thread length: 50mm Manufacturer series: GN 300.1 Kind of toggle: adjustable | Produkt ist nicht verfügbar | Im Einkaufswagen Stück im Wert von UAH | |||||||||||
| GN 300.1-45-M5-50-RS | ELESA+GANTER |  Category: Clamping Levers Description: Lever; adjustable; Thread len: 50mm; Lever length: 45mm; Body: red Body colour: red Type of mounting element: lever External thread: M5 Plunger material: stainless steel Handle material: zinc die-cast Knob height: 34mm Lever length: 45mm Thread length: 50mm Manufacturer series: GN 300.1 Kind of toggle: adjustable | Produkt ist nicht verfügbar | Im Einkaufswagen Stück im Wert von UAH | |||||||||||
| M.1043/30-500-EP | ELESA+GANTER |  Category: Handles Description: Holder; aluminium; black; H: 78mm; L: 524mm; Holes pitch: 500mm; oval Length: 524mm Trade name: handle Type of mounting element: holder Shape: oval Height: 78mm Diameter: 30mm Mounting holes pitch: 500mm Material: aluminium Colour: black Plating material: epoxy resin | Produkt ist nicht verfügbar | Im Einkaufswagen Stück im Wert von UAH | |||||||||||
| M.1043/30-500-SST | ELESA+GANTER |  Category: Handles Description: Holder; stainless steel; natural; H: 78mm; L: 524mm; Ø: 30mm; oval Length: 524mm Trade name: handle Type of mounting element: holder Shape: oval Height: 78mm Diameter: 30mm Mounting holes pitch: 500mm Material: stainless steel Colour: natural | Produkt ist nicht verfügbar | Im Einkaufswagen Stück im Wert von UAH | |||||||||||
| M.1043/30-500-AN | ELESA+GANTER |  Category: Handles Description: Holder; aluminium; aluminium; H: 78mm; L: 524mm; Holes pitch: 500mm Length: 524mm Trade name: handle Type of mounting element: holder Shape: oval Height: 78mm Diameter: 30mm Mounting holes pitch: 500mm Material: aluminium Colour: aluminium Mechanical elements features: anodized | Produkt ist nicht verfügbar | Im Einkaufswagen Stück im Wert von UAH | |||||||||||
| M.1043 BM/30-500-SST | ELESA+GANTER |  Category: Handles Description: Holder; stainless steel; natural; H: 78mm; L: 524mm; Ø: 30mm; oval Length: 524mm Trade name: handle Type of mounting element: holder Shape: oval Resistance to: scratch Height: 78mm Diameter: 30mm Mounting holes pitch: 500mm Material: stainless steel Colour: natural | Produkt ist nicht verfügbar | Im Einkaufswagen Stück im Wert von UAH | |||||||||||
|   | GN 50.4-HF-40 | ELESA+GANTER |  Category: Magnets Description: Magnet: permanent; hard ferrite; 90N; Ø: 40mm; H: 8mm; steel Type of magnet: permanent Enclosure material: steel Version: with a hole for screw mounting Height: 8mm Diameter: 40mm Mounting hole diameter: 5.5mm Force: 90N Magnetic material: hard ferrite | auf Bestellung 74 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | GN 50.3-ND-32-M6 | ELESA+GANTER |  Category: Magnets Description: Magnet: permanent; neodymium; 350N; Ø: 32mm; H: 7mm; steel; steel Type of magnet: permanent Plunger material: steel Enclosure material: steel Height: 7mm Diameter: 32mm Plunger length: 10mm Force: 350N Magnetic material: neodymium External thread: M6 | auf Bestellung 20 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
| VTT.50-SST-P-M10X50 | ELESA+GANTER |  Category: Knobs Description: Knob; Ø: 50mm; Ext.thread: M10; 50mm; technopolymer PA; VTT Type of mounting element: knob Diameter: 50mm External thread: M10 Thread length: 50mm Body material: technopolymer PA Plunger material: stainless steel Body colour: black Manufacturer series: VTT | Produkt ist nicht verfügbar | Im Einkaufswagen Stück im Wert von UAH | |||||||||||
| VTT.60-SST-P-M10X25 | ELESA+GANTER |  Category: Knobs Description: Knob; Ø: 60mm; Ext.thread: M10; 25mm; technopolymer PA; VTT Type of mounting element: knob Diameter: 60mm External thread: M10 Thread length: 25mm Body material: technopolymer PA Plunger material: stainless steel Body colour: black Manufacturer series: VTT | Produkt ist nicht verfügbar | Im Einkaufswagen Stück im Wert von UAH | |||||||||||
|   | DVC.2-10-8-10-M4-10-40 | ELESA+GANTER |  Category: Vibration Dampers Description: Vibration damper; M4; Ø: 10mm; rubber; L: 10mm; Thread len: 10mm Thread: M4 Body material: rubber Plunger material: zinc plated steel Type of mounting element: vibration damper Mechanical elements features: with internal and external thread H dimension: 4mm D1 dimension: 8mm Spacer length: 10mm Thread length: 10mm Diameter: 10mm Stiffness: 37N/mm Static load: 94N Shore hardness: 40±5 Manufacturer series: DVC.2 | auf Bestellung 50 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | DVC.1-25-20-20-M6-18-55 | ELESA+GANTER |  Category: Vibration Dampers Description: Vibration damper; M6; Ø: 25mm; rubber; L: 20mm; Thread len: 18mm Manufacturer series: DVC.1 Thread: M6 Body material: rubber Type of mounting element: vibration damper Mechanical elements features: with external threaded hole on both ends Plunger material: zinc plated steel Thread length: 18mm D1 dimension: 20mm Spacer length: 20mm Diameter: 25mm Shore hardness: 55±5 Stiffness: 180N/mm Static load: 902N | auf Bestellung 8 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | VCT.50 FP-M8 | ELESA+GANTER |  Category: Knobs Description: Knob; Ø: 50mm; Int.thread: M8; 20mm; H: 32mm; technopolymer PP Type of mounting element: knob Diameter: 50mm Internal thread: M8 Thread length: 20mm Height: 32mm Body material: technopolymer PP Body colour: black Boss material: brass | auf Bestellung 90 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | DVA.1-50-25-M10-28-55 | ELESA+GANTER |  Category: Vibration Dampers Description: Vibration damper; M10; Ø: 50mm; rubber; L: 25mm; Thread len: 28mm Thread: M10 Type of mounting element: vibration damper Body material: rubber Plunger material: steel Diameter: 50mm Thread length: 28mm Spacer length: 25mm Shore hardness: 55±5 | auf Bestellung 10 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | DVA.2-15-30-M4-10-55 | ELESA+GANTER |  Category: Vibration Dampers Description: Vibration damper; M4; Ø: 15mm; rubber; L: 30mm; Thread len: 10mm Thread: M4 Body material: rubber Type of mounting element: vibration damper Plunger material: steel H dimension: 4mm Thread length: 10mm Diameter: 15mm Spacer length: 30mm Shore hardness: 55±5 | auf Bestellung 2 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | 451980 | ELESA+GANTER |  Category: Wheels Description: Transport wheel; Ø: 60mm; W: 25mm; H: 83mm; torsional; 700N; 71kg Body material: steel Height: 83mm Manufacturer series: RE.C6 Type of mounting element: transport wheel Wheel width: 25mm Wheel diameter: 60mm Shore hardness: 55 Dynamic load: 700N Force: 71kg Material: polyurethane; technopolymer PA Version: assembly pass through hole; torsional | Produkt ist nicht verfügbar | Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|   | 451986 | ELESA+GANTER |  Category: Wheels Description: Transport wheel; Ø: 40mm; W: 18mm; H: 59mm; torsional with lock Body material: steel Height: 59mm Manufacturer series: RE.C6 Type of mounting element: transport wheel Wheel width: 18mm Wheel diameter: 40mm Shore hardness: 55 Dynamic load: 400N Force: 40kg Material: polyurethane; technopolymer PA Version: assembly pass through hole; torsional with lock | Produkt ist nicht verfügbar | Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|   | 449621 | ELESA+GANTER |  Category: Wheels Description: Transport wheel; Ø: 200mm; W: 50mm; H: 240mm; torsional with lock Manufacturer series: RE.E2-N Type of mounting element: transport wheel Version: torsional with lock; with mounting plate Height: 240mm Wheel width: 50mm Wheel diameter: 200mm Shore hardness: 83 Rolling load: 1.4kN Dynamic load: 2.25kN Force: 142kg Material: rubber; technopolymer PP Body material: steel | auf Bestellung 2 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | GN 1366-ST-60-40-A-BL | ELESA+GANTER |  Category: Hinges Description: Hinge; Width: 60mm; steel; H: 40mm; without coating,for welding Material: steel Height: 40mm Width: 60mm Version: for welding; without coating Type of mounting element: hinge | auf Bestellung 15 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
| M.1043/30-350-EP | ELESA+GANTER |  Category: Handles Description: Holder; aluminium; black; H: 78mm; L: 374mm; Holes pitch: 350mm; oval Plating material: epoxy resin Trade name: handle Type of mounting element: holder Shape: oval Height: 78mm Mounting holes pitch: 350mm Length: 374mm Diameter: 30mm Material: aluminium Colour: black | Produkt ist nicht verfügbar | Im Einkaufswagen Stück im Wert von UAH | |||||||||||
|   | DIN 906-ST-M20X1,5-A | ELESA+GANTER |  Category: Breather Caps and Plugs Description: Hexagon head screw plug; without micro encapsulation; steel Type of mounting element: Hexagon head screw plug Version: without micro encapsulation Thread: M20 Spanner size: HEX 10mm Thread pitch: 1.5 Plating material: zinc Body material: steel Kind of thread: conical DIN standard: DIN 906 | auf Bestellung 26 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | VCT.25 P-M5X25-C9 | ELESA+GANTER |  Category: Knobs Description: Knob; Ø: 25mm; Ext.thread: M5; 25mm; H: 19mm; technopolymer PA Type of mounting element: knob Diameter: 25mm Thread length: 25mm Height: 19mm Body material: technopolymer PA Body colour: black Plunger material: zinc plated steel Cap colour: black Thread pitch: 0.8 External thread: M5 | auf Bestellung 48 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | VCT.25 P-M5X20 | ELESA+GANTER |  Category: Knobs Description: Knob; Ø: 25mm; Ext.thread: M5; 20mm; H: 19mm; technopolymer PA Type of mounting element: knob Diameter: 25mm Thread length: 20mm Height: 19mm Body material: technopolymer PA Body colour: black Plunger material: zinc plated steel Thread pitch: 0.8 Cap colour: black External thread: M5 | auf Bestellung 104 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
|   | GN 438-25-3-4-A-70 | ELESA+GANTER |  Category: Feet Description: Washer; Base dia: 25mm; zinc plated steel; H: 3mm; Plating: rubber Plating material: rubber Mounting: screw Type of mounting element: washer Body material: zinc plated steel Height: 3mm Hole diameter: 4mm Base diameter: 25mm Shore hardness: 70 | auf Bestellung 10 Stücke:Lieferzeit 14-21 Tag (e) | 
 | ||||||||||
| GN449.5-61-OS-PL | ELESA+GANTER |  Category: Latches Description: Lock; without cylinder; stainless steel; Closing: snap fastener Type of mounting element: lock Closing system: snap fastener Version: without cylinder Material: stainless steel | Produkt ist nicht verfügbar | Im Einkaufswagen Stück im Wert von UAH | |||||||||||
| GN449.5-61-SC-PL | ELESA+GANTER |  Category: Latches Description: Lock; stainless steel Type of mounting element: lock Information: lock with one combination, all locks have the same combination and can be opened with the same key Material: stainless steel | Produkt ist nicht verfügbar | Im Einkaufswagen Stück im Wert von UAH | 
| GN 55.2-ND-15-3 |  | 
Hersteller: ELESA+GANTER
Category: Magnets
Description: Magnet: permanent; neodymium; 28N; Ø: 15mm; H: 3mm
Type of magnet: permanent
Height: 3mm
Diameter: 15mm
Force: 28N
Magnetic material: neodymium
    Category: Magnets
Description: Magnet: permanent; neodymium; 28N; Ø: 15mm; H: 3mm
Type of magnet: permanent
Height: 3mm
Diameter: 15mm
Force: 28N
Magnetic material: neodymium
auf Bestellung 3 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 3+ | 23.84 EUR | 
| GN 50.5-ND-32 |  | 
Hersteller: ELESA+GANTER
Category: Magnets
Description: Magnet: permanent; neodymium; 330N; Ø: 32mm; H: 7mm; steel
Internal thread: M5
Magnetic material: neodymium
Type of magnet: permanent
Enclosure material: steel
Thread length: 3mm
Height: 7mm
Diameter: 32mm
Force: 330N
    Category: Magnets
Description: Magnet: permanent; neodymium; 330N; Ø: 32mm; H: 7mm; steel
Internal thread: M5
Magnetic material: neodymium
Type of magnet: permanent
Enclosure material: steel
Thread length: 3mm
Height: 7mm
Diameter: 32mm
Force: 330N
auf Bestellung 4 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 4+ | 17.88 EUR | 
| GN 55.2-ND-8-2 |  | 
Hersteller: ELESA+GANTER
Category: Magnets
Description: Magnet: permanent; neodymium; 7N; Ø: 8mm; H: 2mm
Type of magnet: permanent
Height: 2mm
Diameter: 8mm
Force: 7N
Magnetic material: neodymium
    Category: Magnets
Description: Magnet: permanent; neodymium; 7N; Ø: 8mm; H: 2mm
Type of magnet: permanent
Height: 2mm
Diameter: 8mm
Force: 7N
Magnetic material: neodymium
auf Bestellung 16 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 16+ | 4.46 EUR | 
| 451472 |  | 
Hersteller: ELESA+GANTER
Category: Wheels
Description: Transport wheel; Ø: 300mm; W: 80mm; H: 365mm; permanent; 611kg; steel
Manufacturer series: RE.F4-WEH
Body material: steel
Wheel width: 80mm
Wheel diameter: 300mm
Height: 365mm
Shore hardness: 95
Rolling load: 6kN
Dynamic load: 23kN
Force: 611kg
Material: cast iron; polyurethane
Version: hub with ball bearings; permanent; with mounting plate
Type of mounting element: transport wheel
    Category: Wheels
Description: Transport wheel; Ø: 300mm; W: 80mm; H: 365mm; permanent; 611kg; steel
Manufacturer series: RE.F4-WEH
Body material: steel
Wheel width: 80mm
Wheel diameter: 300mm
Height: 365mm
Shore hardness: 95
Rolling load: 6kN
Dynamic load: 23kN
Force: 611kg
Material: cast iron; polyurethane
Version: hub with ball bearings; permanent; with mounting plate
Type of mounting element: transport wheel
Produkt ist nicht verfügbar
    Im Einkaufswagen
     Stück im Wert von     UAH
| GN 50.4-HF-20 |  | 
Hersteller: ELESA+GANTER
Category: Magnets
Description: Magnet: permanent; hard ferrite; 27N; Ø: 20mm; H: 6mm; steel
Type of magnet: permanent
Enclosure material: steel
Version: with a hole for screw mounting
Height: 6mm
Diameter: 20mm
Mounting hole diameter: 4.1mm
Force: 27N
Magnetic material: hard ferrite
    Category: Magnets
Description: Magnet: permanent; hard ferrite; 27N; Ø: 20mm; H: 6mm; steel
Type of magnet: permanent
Enclosure material: steel
Version: with a hole for screw mounting
Height: 6mm
Diameter: 20mm
Mounting hole diameter: 4.1mm
Force: 27N
Magnetic material: hard ferrite
auf Bestellung 9 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 9+ | 7.95 EUR | 
| CFM.40 SH-5 |  | 
Hersteller: ELESA+GANTER
Category: Hinges
Description: Hinge; Width: 40mm; technopolymer PA; black; H: 40mm
Version: pass-through holes for countersunk head screws
Type of mounting element: hinge
Pin material: stainless steel
Panel cutout diameter: 5.5mm
Height: 40mm
Mounting holes pitch: 25/25mm
Width: 40mm
Material: technopolymer PA
Colour: black
    Category: Hinges
Description: Hinge; Width: 40mm; technopolymer PA; black; H: 40mm
Version: pass-through holes for countersunk head screws
Type of mounting element: hinge
Pin material: stainless steel
Panel cutout diameter: 5.5mm
Height: 40mm
Mounting holes pitch: 25/25mm
Width: 40mm
Material: technopolymer PA
Colour: black
auf Bestellung 103 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 12+ | 6.08 EUR | 
| 15+ | 4.89 EUR | 
| 16+ | 4.59 EUR | 
| VTT.32-C-P-M6X16-C17 |  | 
Hersteller: ELESA+GANTER
Category: Knobs
Description: Knob; Ø: 32mm; Ext.thread: M6; Int.thread: M6; 16mm; H: 22mm; VTT-C-P
Cap colour: green
Body material: technopolymer PA
Type of mounting element: knob
Manufacturer series: VTT-C-P
Internal thread: M6
External thread: M6
Mounting: screwed rod
Plunger material: zinc plated steel
Height: 22mm
Thread length: 16mm
Diameter: 32mm
Body colour: black
    Category: Knobs
Description: Knob; Ø: 32mm; Ext.thread: M6; Int.thread: M6; 16mm; H: 22mm; VTT-C-P
Cap colour: green
Body material: technopolymer PA
Type of mounting element: knob
Manufacturer series: VTT-C-P
Internal thread: M6
External thread: M6
Mounting: screwed rod
Plunger material: zinc plated steel
Height: 22mm
Thread length: 16mm
Diameter: 32mm
Body colour: black
auf Bestellung 3 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 3+ | 23.84 EUR | 
| 550809 |  | 
Hersteller: ELESA+GANTER
Category: Mechanical Power Transmission
Description: Spur gear; whell width: 45mm; Ø: 54mm; Number of teeth: 16; ZCL
Type of mounting element: spur gear
Wheel width: 45mm
Wheel diameter: 54mm
Number of teeth: 16
Material: technopolymer PA
Version: hub with pass-through hole
Manufacturer series: ZCL
Module: 3
Panel cutout diameter: 12mm
Kind of material: fiber glass reinforced
    Category: Mechanical Power Transmission
Description: Spur gear; whell width: 45mm; Ø: 54mm; Number of teeth: 16; ZCL
Type of mounting element: spur gear
Wheel width: 45mm
Wheel diameter: 54mm
Number of teeth: 16
Material: technopolymer PA
Version: hub with pass-through hole
Manufacturer series: ZCL
Module: 3
Panel cutout diameter: 12mm
Kind of material: fiber glass reinforced
Produkt ist nicht verfügbar
    Im Einkaufswagen
     Stück im Wert von     UAH
| DVA.3-150-55-M20-70 |  | 
Hersteller: ELESA+GANTER
Category: Vibration Dampers
Description: Vibration damper; M20; Ø: 150mm; rubber; L: 55mm; steel
Type of mounting element: vibration damper
Diameter: 150mm
Plunger material: steel
Spacer length: 55mm
Shore hardness: 70±5
Thread: M20
Body material: rubber
    Category: Vibration Dampers
Description: Vibration damper; M20; Ø: 150mm; rubber; L: 55mm; steel
Type of mounting element: vibration damper
Diameter: 150mm
Plunger material: steel
Spacer length: 55mm
Shore hardness: 70±5
Thread: M20
Body material: rubber
Produkt ist nicht verfügbar
    Im Einkaufswagen
     Stück im Wert von     UAH
| GN 235-NI-55-55-HB-GS |  | 
Hersteller: ELESA+GANTER
Category: Hinges
Description: Hinge; Width: 55mm; stainless steel; H: 55mm; adjustable
Material: stainless steel
Width: 55mm
Type of mounting element: hinge
Height: 55mm
Version: adjustable
    Category: Hinges
Description: Hinge; Width: 55mm; stainless steel; H: 55mm; adjustable
Material: stainless steel
Width: 55mm
Type of mounting element: hinge
Height: 55mm
Version: adjustable
auf Bestellung 1 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 1+ | 71.5 EUR | 
| 8351 |  | 
Hersteller: ELESA+GANTER
Category: Knobs
Description: Knob wing; Int.thread: M6; 8mm; H: 15mm; polyamide; W: 30mm
Type of mounting element: knob wing
Internal thread: M6
Thread length: 8mm
Height: 15mm
Body material: polyamide
Width: 30mm
Body colour: black
Boss material: brass
Resistance to: most of oils
    Category: Knobs
Description: Knob wing; Int.thread: M6; 8mm; H: 15mm; polyamide; W: 30mm
Type of mounting element: knob wing
Internal thread: M6
Thread length: 8mm
Height: 15mm
Body material: polyamide
Width: 30mm
Body colour: black
Boss material: brass
Resistance to: most of oils
auf Bestellung 21 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 21+ | 3.4 EUR | 
| ISO 7379-4-M3-6 |  | 
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M3; 0.5; Thread len: 7mm; hex key; HEX 2mm
Type of mounting element: shoulder screw
Material: steel
Thread: M3
Thread pitch: 0.5
Thread length: 7mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 2mm
Head height: 3mm
Head diameter: 7mm
ISO standard: ISO 7379
Plunger length: 6mm
Plunger diameter: 4mm
Plating material: black finish
Strength class: 12.9
    Category: Shoulder Screws
Description: Shoulder screw; steel; M3; 0.5; Thread len: 7mm; hex key; HEX 2mm
Type of mounting element: shoulder screw
Material: steel
Thread: M3
Thread pitch: 0.5
Thread length: 7mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 2mm
Head height: 3mm
Head diameter: 7mm
ISO standard: ISO 7379
Plunger length: 6mm
Plunger diameter: 4mm
Plating material: black finish
Strength class: 12.9
auf Bestellung 57 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 14+ | 5.22 EUR | 
| 17+ | 4.43 EUR | 
| 50+ | 4.09 EUR | 
| ISO 7379-8-M6-16 |  | 
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M6; 1; Thread len: 11mm; hex key; HEX 4mm
Type of mounting element: shoulder screw
Material: steel
Thread: M6
Thread pitch: 1
Thread length: 11mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 4mm
Head height: 5.5mm
Head diameter: 13mm
ISO standard: ISO 7379
Plunger length: 16mm
Plunger diameter: 8mm
Plating material: black finish
Strength class: 12.9
    Category: Shoulder Screws
Description: Shoulder screw; steel; M6; 1; Thread len: 11mm; hex key; HEX 4mm
Type of mounting element: shoulder screw
Material: steel
Thread: M6
Thread pitch: 1
Thread length: 11mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 4mm
Head height: 5.5mm
Head diameter: 13mm
ISO standard: ISO 7379
Plunger length: 16mm
Plunger diameter: 8mm
Plating material: black finish
Strength class: 12.9
auf Bestellung 153 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 53+ | 1.36 EUR | 
| 66+ | 1.09 EUR | 
| 67+ | 1.07 EUR | 
| ISO 7379-8-M6-30 |  | 
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M6; 1; Thread len: 11mm; hex key; HEX 4mm
Type of mounting element: shoulder screw
Material: steel
Thread: M6
Thread pitch: 1
Thread length: 11mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 4mm
Head height: 5.5mm
Head diameter: 13mm
ISO standard: ISO 7379
Plunger length: 30mm
Plunger diameter: 8mm
Plating material: black finish
Strength class: 12.9
    Category: Shoulder Screws
Description: Shoulder screw; steel; M6; 1; Thread len: 11mm; hex key; HEX 4mm
Type of mounting element: shoulder screw
Material: steel
Thread: M6
Thread pitch: 1
Thread length: 11mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 4mm
Head height: 5.5mm
Head diameter: 13mm
ISO standard: ISO 7379
Plunger length: 30mm
Plunger diameter: 8mm
Plating material: black finish
Strength class: 12.9
auf Bestellung 264 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 45+ | 1.6 EUR | 
| 57+ | 1.27 EUR | 
| 60+ | 1.26 EUR | 
| ISO 7379-6-M5-10 |  | 
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M5; 0.8; Thread len: 9.5mm; hex key; HEX 3mm
Type of mounting element: shoulder screw
Material: steel
Thread: M5
Thread pitch: 0.8
Thread length: 9.5mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 3mm
Head height: 4.5mm
Head diameter: 10mm
ISO standard: ISO 7379
Plunger length: 10mm
Plunger diameter: 6mm
Plating material: black finish
Strength class: 12.9
    Category: Shoulder Screws
Description: Shoulder screw; steel; M5; 0.8; Thread len: 9.5mm; hex key; HEX 3mm
Type of mounting element: shoulder screw
Material: steel
Thread: M5
Thread pitch: 0.8
Thread length: 9.5mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 3mm
Head height: 4.5mm
Head diameter: 10mm
ISO standard: ISO 7379
Plunger length: 10mm
Plunger diameter: 6mm
Plating material: black finish
Strength class: 12.9
auf Bestellung 99 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 60+ | 1.2 EUR | 
| 74+ | 0.97 EUR | 
| ISO 7379-6-M5-16 |  | 
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M5; 0.8; Thread len: 9.5mm; hex key; HEX 3mm
Type of mounting element: shoulder screw
Material: steel
Thread: M5
Thread pitch: 0.8
Thread length: 9.5mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 3mm
Head height: 4.5mm
Head diameter: 10mm
ISO standard: ISO 7379
Plunger length: 16mm
Plunger diameter: 6mm
Plating material: black finish
Strength class: 12.9
    Category: Shoulder Screws
Description: Shoulder screw; steel; M5; 0.8; Thread len: 9.5mm; hex key; HEX 3mm
Type of mounting element: shoulder screw
Material: steel
Thread: M5
Thread pitch: 0.8
Thread length: 9.5mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 3mm
Head height: 4.5mm
Head diameter: 10mm
ISO standard: ISO 7379
Plunger length: 16mm
Plunger diameter: 6mm
Plating material: black finish
Strength class: 12.9
auf Bestellung 146 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 55+ | 1.32 EUR | 
| 69+ | 1.04 EUR | 
| 70+ | 1.03 EUR | 
| ISO 7379-6-M5-20 |  | 
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M5; 0.8; Thread len: 9.5mm; hex key; HEX 3mm
Type of mounting element: shoulder screw
Material: steel
Thread: M5
Thread pitch: 0.8
Thread length: 9.5mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 3mm
Head height: 4.5mm
Head diameter: 10mm
ISO standard: ISO 7379
Plunger length: 20mm
Plunger diameter: 6mm
Plating material: black finish
Strength class: 12.9
    Category: Shoulder Screws
Description: Shoulder screw; steel; M5; 0.8; Thread len: 9.5mm; hex key; HEX 3mm
Type of mounting element: shoulder screw
Material: steel
Thread: M5
Thread pitch: 0.8
Thread length: 9.5mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 3mm
Head height: 4.5mm
Head diameter: 10mm
ISO standard: ISO 7379
Plunger length: 20mm
Plunger diameter: 6mm
Plating material: black finish
Strength class: 12.9
auf Bestellung 36 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 36+ | 1.99 EUR | 
| ISO 7379-10-M8-40 |  | 
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm
Type of mounting element: shoulder screw
Material: steel
Thread: M8
Thread pitch: 1.25
Thread length: 13mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 5mm
Head height: 7mm
Head diameter: 16mm
ISO standard: ISO 7379
Plunger length: 40mm
Plunger diameter: 10mm
Plating material: black finish
Strength class: 12.9
    Category: Shoulder Screws
Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm
Type of mounting element: shoulder screw
Material: steel
Thread: M8
Thread pitch: 1.25
Thread length: 13mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 5mm
Head height: 7mm
Head diameter: 16mm
ISO standard: ISO 7379
Plunger length: 40mm
Plunger diameter: 10mm
Plating material: black finish
Strength class: 12.9
auf Bestellung 103 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 29+ | 2.5 EUR | 
| 36+ | 1.99 EUR | 
| 50+ | 1.97 EUR | 
| ISO 7379-5-M4-8 |  | 
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M4; 0.7; Thread len: 8mm; hex key; HEX 2.5mm
Type of mounting element: shoulder screw
Material: steel
Thread: M4
Thread pitch: 0.7
Thread length: 8mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 2.5mm
Head height: 4mm
Head diameter: 9mm
ISO standard: ISO 7379
Plunger length: 8mm
Plunger diameter: 5mm
Plating material: black finish
Strength class: 12.9
    Category: Shoulder Screws
Description: Shoulder screw; steel; M4; 0.7; Thread len: 8mm; hex key; HEX 2.5mm
Type of mounting element: shoulder screw
Material: steel
Thread: M4
Thread pitch: 0.7
Thread length: 8mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 2.5mm
Head height: 4mm
Head diameter: 9mm
ISO standard: ISO 7379
Plunger length: 8mm
Plunger diameter: 5mm
Plating material: black finish
Strength class: 12.9
auf Bestellung 37 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 13+ | 5.78 EUR | 
| 15+ | 4.95 EUR | 
| ISO 7379-6-M5-12 |  | 
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M5; 0.8; Thread len: 9.5mm; hex key; HEX 3mm
Type of mounting element: shoulder screw
Material: steel
Thread: M5
Thread pitch: 0.8
Thread length: 9.5mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 3mm
Head height: 4.5mm
Head diameter: 10mm
ISO standard: ISO 7379
Plunger length: 12mm
Plunger diameter: 6mm
Plating material: black finish
Strength class: 12.9
    Category: Shoulder Screws
Description: Shoulder screw; steel; M5; 0.8; Thread len: 9.5mm; hex key; HEX 3mm
Type of mounting element: shoulder screw
Material: steel
Thread: M5
Thread pitch: 0.8
Thread length: 9.5mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 3mm
Head height: 4.5mm
Head diameter: 10mm
ISO standard: ISO 7379
Plunger length: 12mm
Plunger diameter: 6mm
Plating material: black finish
Strength class: 12.9
auf Bestellung 67 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 59+ | 1.23 EUR | 
| 67+ | 1.07 EUR | 
| ISO 7379-5-M4-5 |  | 
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M4; 0.7; Thread len: 8mm; hex key; HEX 2.5mm
Type of mounting element: shoulder screw
Material: steel
Thread: M4
Thread pitch: 0.7
Thread length: 8mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 2.5mm
Head height: 4mm
Head diameter: 9mm
ISO standard: ISO 7379
Plunger length: 5mm
Plunger diameter: 5mm
Plating material: black finish
Strength class: 12.9
    Category: Shoulder Screws
Description: Shoulder screw; steel; M4; 0.7; Thread len: 8mm; hex key; HEX 2.5mm
Type of mounting element: shoulder screw
Material: steel
Thread: M4
Thread pitch: 0.7
Thread length: 8mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 2.5mm
Head height: 4mm
Head diameter: 9mm
ISO standard: ISO 7379
Plunger length: 5mm
Plunger diameter: 5mm
Plating material: black finish
Strength class: 12.9
auf Bestellung 61 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 14+ | 5.29 EUR | 
| 17+ | 4.46 EUR | 
| 50+ | 4.16 EUR | 
| ISO 7379-10-M8-16 |  | 
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm
Type of mounting element: shoulder screw
Material: steel
Thread: M8
Thread pitch: 1.25
Thread length: 13mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 5mm
Head height: 7mm
Head diameter: 16mm
ISO standard: ISO 7379
Plunger length: 16mm
Plunger diameter: 10mm
Plating material: black finish
Strength class: 12.9
    Category: Shoulder Screws
Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm
Type of mounting element: shoulder screw
Material: steel
Thread: M8
Thread pitch: 1.25
Thread length: 13mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 5mm
Head height: 7mm
Head diameter: 16mm
ISO standard: ISO 7379
Plunger length: 16mm
Plunger diameter: 10mm
Plating material: black finish
Strength class: 12.9
auf Bestellung 49 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 38+ | 1.9 EUR | 
| 48+ | 1.52 EUR | 
| ISO 7379-10-M8-20 |  | 
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm
Type of mounting element: shoulder screw
Material: steel
Thread: M8
Thread pitch: 1.25
Thread length: 13mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 5mm
Head height: 7mm
Head diameter: 16mm
ISO standard: ISO 7379
Plunger length: 20mm
Plunger diameter: 10mm
Plating material: black finish
Strength class: 12.9
    Category: Shoulder Screws
Description: Shoulder screw; steel; M8; 1.25; Thread len: 13mm; hex key; HEX 5mm
Type of mounting element: shoulder screw
Material: steel
Thread: M8
Thread pitch: 1.25
Thread length: 13mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 5mm
Head height: 7mm
Head diameter: 16mm
ISO standard: ISO 7379
Plunger length: 20mm
Plunger diameter: 10mm
Plating material: black finish
Strength class: 12.9
auf Bestellung 28 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 28+ | 2.56 EUR | 
| ISO 7379-6-M5-25 |  | 
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M5; 0.8; Thread len: 9.5mm; hex key; HEX 3mm
Type of mounting element: shoulder screw
Material: steel
Thread: M5
Thread pitch: 0.8
Thread length: 9.5mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 3mm
Head height: 4.5mm
Head diameter: 10mm
ISO standard: ISO 7379
Plunger length: 25mm
Plunger diameter: 6mm
Plating material: black finish
Strength class: 12.9
    Category: Shoulder Screws
Description: Shoulder screw; steel; M5; 0.8; Thread len: 9.5mm; hex key; HEX 3mm
Type of mounting element: shoulder screw
Material: steel
Thread: M5
Thread pitch: 0.8
Thread length: 9.5mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 3mm
Head height: 4.5mm
Head diameter: 10mm
ISO standard: ISO 7379
Plunger length: 25mm
Plunger diameter: 6mm
Plating material: black finish
Strength class: 12.9
auf Bestellung 58 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 47+ | 1.53 EUR | 
| 58+ | 1.23 EUR | 
| ISO 7379-5-M4-12 |  | 
Hersteller: ELESA+GANTER
Category: Shoulder Screws
Description: Shoulder screw; steel; M4; 0.7; Thread len: 8mm; hex key; HEX 2.5mm
Type of mounting element: shoulder screw
Material: steel
Thread: M4
Thread pitch: 0.7
Thread length: 8mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 2.5mm
Head height: 4mm
Head diameter: 9mm
ISO standard: ISO 7379
Plunger length: 12mm
Plunger diameter: 5mm
Plating material: black finish
Strength class: 12.9
    Category: Shoulder Screws
Description: Shoulder screw; steel; M4; 0.7; Thread len: 8mm; hex key; HEX 2.5mm
Type of mounting element: shoulder screw
Material: steel
Thread: M4
Thread pitch: 0.7
Thread length: 8mm
Kind of head: cheese head; knurled
Kind of cut: hex key
Cut size: HEX 2.5mm
Head height: 4mm
Head diameter: 9mm
ISO standard: ISO 7379
Plunger length: 12mm
Plunger diameter: 5mm
Plating material: black finish
Strength class: 12.9
auf Bestellung 69 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 11+ | 6.64 EUR | 
| 13+ | 5.68 EUR | 
| 50+ | 5.23 EUR | 
| GN 2282-MSW-57-G-50-1 |  | 
Hersteller: ELESA+GANTER
Category: Handwheels and pointers
Description: Spirit level; viewing window top; H: 13mm; Ømount.hole: 4.5mm
Height: 13mm
Version: viewing window top
Type of mounting element: spirit level
Mechanical mounting: screw
Panel cutout diameter: 4.5mm
Length: 37mm
Mounting holes pitch: 45mm
Base dimensions: 57x12mm
Body material: brass
Body colour: black
    Category: Handwheels and pointers
Description: Spirit level; viewing window top; H: 13mm; Ømount.hole: 4.5mm
Height: 13mm
Version: viewing window top
Type of mounting element: spirit level
Mechanical mounting: screw
Panel cutout diameter: 4.5mm
Length: 37mm
Mounting holes pitch: 45mm
Base dimensions: 57x12mm
Body material: brass
Body colour: black
auf Bestellung 8 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 5+ | 16.77 EUR | 
| GN 2282-MSW-57-G-50-3 |  | 
Hersteller: ELESA+GANTER
Category: Handwheels and pointers
Description: Spirit level; viewing window top-front-back; H: 13mm; brass
Height: 13mm
Version: viewing window top - front - back
Type of mounting element: spirit level
Mechanical mounting: screw
Panel cutout diameter: 4.5mm
Length: 37mm
Mounting holes pitch: 45mm
Base dimensions: 57x12mm
Body material: brass
Body colour: black
    Category: Handwheels and pointers
Description: Spirit level; viewing window top-front-back; H: 13mm; brass
Height: 13mm
Version: viewing window top - front - back
Type of mounting element: spirit level
Mechanical mounting: screw
Panel cutout diameter: 4.5mm
Length: 37mm
Mounting holes pitch: 45mm
Base dimensions: 57x12mm
Body material: brass
Body colour: black
auf Bestellung 5 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 4+ | 18.89 EUR | 
| 5+ | 17.86 EUR | 
| GN 2282-MSW-57-G-6-2 |  | 
Hersteller: ELESA+GANTER
Category: Handwheels and pointers
Description: Spirit level; viewing window top-front; H: 13mm; brass; screw
Height: 13mm
Version: viewing window top - front
Type of mounting element: spirit level
Mechanical mounting: screw
Panel cutout diameter: 4.5mm
Length: 37mm
Mounting holes pitch: 45mm
Base dimensions: 57x12mm
Body material: brass
Body colour: black
    Category: Handwheels and pointers
Description: Spirit level; viewing window top-front; H: 13mm; brass; screw
Height: 13mm
Version: viewing window top - front
Type of mounting element: spirit level
Mechanical mounting: screw
Panel cutout diameter: 4.5mm
Length: 37mm
Mounting holes pitch: 45mm
Base dimensions: 57x12mm
Body material: brass
Body colour: black
auf Bestellung 2 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 2+ | 46.19 EUR | 
| GN 50.4-HF-80-M10 |  | 
Hersteller: ELESA+GANTER
Category: Magnets
Description: Magnet: permanent; hard ferrite; 540N; Ø: 80mm; H: 18mm; steel
Version: with a hole for screw mounting
Magnetic material: hard ferrite
Internal thread: M10
Type of magnet: permanent
Enclosure material: steel
Height: 18mm
Diameter: 80mm
Force: 540N
    Category: Magnets
Description: Magnet: permanent; hard ferrite; 540N; Ø: 80mm; H: 18mm; steel
Version: with a hole for screw mounting
Magnetic material: hard ferrite
Internal thread: M10
Type of magnet: permanent
Enclosure material: steel
Height: 18mm
Diameter: 80mm
Force: 540N
Produkt ist nicht verfügbar
    Im Einkaufswagen
     Stück im Wert von     UAH
| VCT.40 P-M8X35 |  | 
Hersteller: ELESA+GANTER
Category: Knobs
Description: Knob; Ø: 40mm; Ext.thread: M8; 35mm; H: 27mm; technopolymer PP
Type of mounting element: knob
Diameter: 40mm
Thread length: 35mm
Height: 27mm
Body material: technopolymer PP
Body colour: black
Plunger material: zinc plated steel
Thread pitch: 1.25
Cap colour: black
External thread: M8
    Category: Knobs
Description: Knob; Ø: 40mm; Ext.thread: M8; 35mm; H: 27mm; technopolymer PP
Type of mounting element: knob
Diameter: 40mm
Thread length: 35mm
Height: 27mm
Body material: technopolymer PP
Body colour: black
Plunger material: zinc plated steel
Thread pitch: 1.25
Cap colour: black
External thread: M8
auf Bestellung 102 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 40+ | 1.82 EUR | 
| 44+ | 1.66 EUR | 
| 50+ | 1.46 EUR | 
| 53+ | 1.37 EUR | 
| 37005 |  | 
Hersteller: ELESA+GANTER
Category: Handles
Description: Holder; technopolymer PA; red; H: 38mm; L: 109mm; W: 21mm; F2: 2.5kN
Height: 38mm
Colour: red
Trade name: handle
Type of mounting element: holder
Material: technopolymer PA
Width: 21mm
Panel cutout diameter: 6.5mm
Mounting holes pitch: 93.5mm
Length: 109mm
F2 Force: 2.5kN
F1 Force: 3.5kN
    Category: Handles
Description: Holder; technopolymer PA; red; H: 38mm; L: 109mm; W: 21mm; F2: 2.5kN
Height: 38mm
Colour: red
Trade name: handle
Type of mounting element: holder
Material: technopolymer PA
Width: 21mm
Panel cutout diameter: 6.5mm
Mounting holes pitch: 93.5mm
Length: 109mm
F2 Force: 2.5kN
F1 Force: 3.5kN
auf Bestellung 20 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 20+ | 3.58 EUR | 
| 2242-15-B5-5-AL-KU |  | 
Hersteller: ELESA+GANTER
Category: Encoders
Description: Coupling; Ø: 15mm; Ø1: 5mm; Ø2: 5mm; aluminium
Diameter: 15mm
Material: aluminium
Type of sensors accessories: coupling
Assembly hole 1 diameter: 5mm
Assembly hole 2 diameter: 5mm
    Category: Encoders
Description: Coupling; Ø: 15mm; Ø1: 5mm; Ø2: 5mm; aluminium
Diameter: 15mm
Material: aluminium
Type of sensors accessories: coupling
Assembly hole 1 diameter: 5mm
Assembly hole 2 diameter: 5mm
Produkt ist nicht verfügbar
    Im Einkaufswagen
     Stück im Wert von     UAH
| 2242-15-B4-5-AL-KU |  | 
Hersteller: ELESA+GANTER
Category: Encoders
Description: Coupling; Ø: 15mm; Ø1: 4mm; Ø2: 5mm; aluminium
Diameter: 15mm
Material: aluminium
Type of sensors accessories: coupling
Assembly hole 1 diameter: 4mm
Assembly hole 2 diameter: 5mm
    Category: Encoders
Description: Coupling; Ø: 15mm; Ø1: 4mm; Ø2: 5mm; aluminium
Diameter: 15mm
Material: aluminium
Type of sensors accessories: coupling
Assembly hole 1 diameter: 4mm
Assembly hole 2 diameter: 5mm
Produkt ist nicht verfügbar
    Im Einkaufswagen
     Stück im Wert von     UAH
| 2242-15-B5-6-AL-KU |  | 
Hersteller: ELESA+GANTER
Category: Encoders
Description: Coupling; Ø: 15mm; Ø1: 5mm; Ø2: 6mm; aluminium
Diameter: 15mm
Material: aluminium
Type of sensors accessories: coupling
Assembly hole 1 diameter: 5mm
Assembly hole 2 diameter: 6mm
    Category: Encoders
Description: Coupling; Ø: 15mm; Ø1: 5mm; Ø2: 6mm; aluminium
Diameter: 15mm
Material: aluminium
Type of sensors accessories: coupling
Assembly hole 1 diameter: 5mm
Assembly hole 2 diameter: 6mm
Produkt ist nicht verfügbar
    Im Einkaufswagen
     Stück im Wert von     UAH
| GN 300.1-30-M5-50-RS |  | 
Hersteller: ELESA+GANTER
Category: Clamping Levers
Description: Lever; adjustable; Thread len: 50mm; Lever length: 30mm; Body: red
Body colour: red
Type of mounting element: lever
External thread: M5
Plunger material: stainless steel
Handle material: zinc die-cast
Knob height: 31mm
Lever length: 30mm
Thread length: 50mm
Manufacturer series: GN 300.1
Kind of toggle: adjustable
    Category: Clamping Levers
Description: Lever; adjustable; Thread len: 50mm; Lever length: 30mm; Body: red
Body colour: red
Type of mounting element: lever
External thread: M5
Plunger material: stainless steel
Handle material: zinc die-cast
Knob height: 31mm
Lever length: 30mm
Thread length: 50mm
Manufacturer series: GN 300.1
Kind of toggle: adjustable
Produkt ist nicht verfügbar
    Im Einkaufswagen
     Stück im Wert von     UAH
| GN 300.1-45-M5-50-RS |  | 
Hersteller: ELESA+GANTER
Category: Clamping Levers
Description: Lever; adjustable; Thread len: 50mm; Lever length: 45mm; Body: red
Body colour: red
Type of mounting element: lever
External thread: M5
Plunger material: stainless steel
Handle material: zinc die-cast
Knob height: 34mm
Lever length: 45mm
Thread length: 50mm
Manufacturer series: GN 300.1
Kind of toggle: adjustable
    Category: Clamping Levers
Description: Lever; adjustable; Thread len: 50mm; Lever length: 45mm; Body: red
Body colour: red
Type of mounting element: lever
External thread: M5
Plunger material: stainless steel
Handle material: zinc die-cast
Knob height: 34mm
Lever length: 45mm
Thread length: 50mm
Manufacturer series: GN 300.1
Kind of toggle: adjustable
Produkt ist nicht verfügbar
    Im Einkaufswagen
     Stück im Wert von     UAH
| M.1043/30-500-EP |  | 
Hersteller: ELESA+GANTER
Category: Handles
Description: Holder; aluminium; black; H: 78mm; L: 524mm; Holes pitch: 500mm; oval
Length: 524mm
Trade name: handle
Type of mounting element: holder
Shape: oval
Height: 78mm
Diameter: 30mm
Mounting holes pitch: 500mm
Material: aluminium
Colour: black
Plating material: epoxy resin
    Category: Handles
Description: Holder; aluminium; black; H: 78mm; L: 524mm; Holes pitch: 500mm; oval
Length: 524mm
Trade name: handle
Type of mounting element: holder
Shape: oval
Height: 78mm
Diameter: 30mm
Mounting holes pitch: 500mm
Material: aluminium
Colour: black
Plating material: epoxy resin
Produkt ist nicht verfügbar
    Im Einkaufswagen
     Stück im Wert von     UAH
| M.1043/30-500-SST |  | 
Hersteller: ELESA+GANTER
Category: Handles
Description: Holder; stainless steel; natural; H: 78mm; L: 524mm; Ø: 30mm; oval
Length: 524mm
Trade name: handle
Type of mounting element: holder
Shape: oval
Height: 78mm
Diameter: 30mm
Mounting holes pitch: 500mm
Material: stainless steel
Colour: natural
    Category: Handles
Description: Holder; stainless steel; natural; H: 78mm; L: 524mm; Ø: 30mm; oval
Length: 524mm
Trade name: handle
Type of mounting element: holder
Shape: oval
Height: 78mm
Diameter: 30mm
Mounting holes pitch: 500mm
Material: stainless steel
Colour: natural
Produkt ist nicht verfügbar
    Im Einkaufswagen
     Stück im Wert von     UAH
| M.1043/30-500-AN |  | 
Hersteller: ELESA+GANTER
Category: Handles
Description: Holder; aluminium; aluminium; H: 78mm; L: 524mm; Holes pitch: 500mm
Length: 524mm
Trade name: handle
Type of mounting element: holder
Shape: oval
Height: 78mm
Diameter: 30mm
Mounting holes pitch: 500mm
Material: aluminium
Colour: aluminium
Mechanical elements features: anodized
    Category: Handles
Description: Holder; aluminium; aluminium; H: 78mm; L: 524mm; Holes pitch: 500mm
Length: 524mm
Trade name: handle
Type of mounting element: holder
Shape: oval
Height: 78mm
Diameter: 30mm
Mounting holes pitch: 500mm
Material: aluminium
Colour: aluminium
Mechanical elements features: anodized
Produkt ist nicht verfügbar
    Im Einkaufswagen
     Stück im Wert von     UAH
| M.1043 BM/30-500-SST |  | 
Hersteller: ELESA+GANTER
Category: Handles
Description: Holder; stainless steel; natural; H: 78mm; L: 524mm; Ø: 30mm; oval
Length: 524mm
Trade name: handle
Type of mounting element: holder
Shape: oval
Resistance to: scratch
Height: 78mm
Diameter: 30mm
Mounting holes pitch: 500mm
Material: stainless steel
Colour: natural
    Category: Handles
Description: Holder; stainless steel; natural; H: 78mm; L: 524mm; Ø: 30mm; oval
Length: 524mm
Trade name: handle
Type of mounting element: holder
Shape: oval
Resistance to: scratch
Height: 78mm
Diameter: 30mm
Mounting holes pitch: 500mm
Material: stainless steel
Colour: natural
Produkt ist nicht verfügbar
    Im Einkaufswagen
     Stück im Wert von     UAH
| GN 50.4-HF-40 |  | 
Hersteller: ELESA+GANTER
Category: Magnets
Description: Magnet: permanent; hard ferrite; 90N; Ø: 40mm; H: 8mm; steel
Type of magnet: permanent
Enclosure material: steel
Version: with a hole for screw mounting
Height: 8mm
Diameter: 40mm
Mounting hole diameter: 5.5mm
Force: 90N
Magnetic material: hard ferrite
    Category: Magnets
Description: Magnet: permanent; hard ferrite; 90N; Ø: 40mm; H: 8mm; steel
Type of magnet: permanent
Enclosure material: steel
Version: with a hole for screw mounting
Height: 8mm
Diameter: 40mm
Mounting hole diameter: 5.5mm
Force: 90N
Magnetic material: hard ferrite
auf Bestellung 74 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 10+ | 7.68 EUR | 
| 12+ | 6.16 EUR | 
| 13+ | 5.79 EUR | 
| GN 50.3-ND-32-M6 |  | 
Hersteller: ELESA+GANTER
Category: Magnets
Description: Magnet: permanent; neodymium; 350N; Ø: 32mm; H: 7mm; steel; steel
Type of magnet: permanent
Plunger material: steel
Enclosure material: steel
Height: 7mm
Diameter: 32mm
Plunger length: 10mm
Force: 350N
Magnetic material: neodymium
External thread: M6
    Category: Magnets
Description: Magnet: permanent; neodymium; 350N; Ø: 32mm; H: 7mm; steel; steel
Type of magnet: permanent
Plunger material: steel
Enclosure material: steel
Height: 7mm
Diameter: 32mm
Plunger length: 10mm
Force: 350N
Magnetic material: neodymium
External thread: M6
auf Bestellung 20 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 4+ | 18.1 EUR | 
| 5+ | 17 EUR | 
| VTT.50-SST-P-M10X50 |  | 
Hersteller: ELESA+GANTER
Category: Knobs
Description: Knob; Ø: 50mm; Ext.thread: M10; 50mm; technopolymer PA; VTT
Type of mounting element: knob
Diameter: 50mm
External thread: M10
Thread length: 50mm
Body material: technopolymer PA
Plunger material: stainless steel
Body colour: black
Manufacturer series: VTT
    Category: Knobs
Description: Knob; Ø: 50mm; Ext.thread: M10; 50mm; technopolymer PA; VTT
Type of mounting element: knob
Diameter: 50mm
External thread: M10
Thread length: 50mm
Body material: technopolymer PA
Plunger material: stainless steel
Body colour: black
Manufacturer series: VTT
Produkt ist nicht verfügbar
    Im Einkaufswagen
     Stück im Wert von     UAH
| VTT.60-SST-P-M10X25 |  | 
Hersteller: ELESA+GANTER
Category: Knobs
Description: Knob; Ø: 60mm; Ext.thread: M10; 25mm; technopolymer PA; VTT
Type of mounting element: knob
Diameter: 60mm
External thread: M10
Thread length: 25mm
Body material: technopolymer PA
Plunger material: stainless steel
Body colour: black
Manufacturer series: VTT
    Category: Knobs
Description: Knob; Ø: 60mm; Ext.thread: M10; 25mm; technopolymer PA; VTT
Type of mounting element: knob
Diameter: 60mm
External thread: M10
Thread length: 25mm
Body material: technopolymer PA
Plunger material: stainless steel
Body colour: black
Manufacturer series: VTT
Produkt ist nicht verfügbar
    Im Einkaufswagen
     Stück im Wert von     UAH
| DVC.2-10-8-10-M4-10-40 |  | 
Hersteller: ELESA+GANTER
Category: Vibration Dampers
Description: Vibration damper; M4; Ø: 10mm; rubber; L: 10mm; Thread len: 10mm
Thread: M4
Body material: rubber
Plunger material: zinc plated steel
Type of mounting element: vibration damper
Mechanical elements features: with internal and external thread
H dimension: 4mm
D1 dimension: 8mm
Spacer length: 10mm
Thread length: 10mm
Diameter: 10mm
Stiffness: 37N/mm
Static load: 94N
Shore hardness: 40±5
Manufacturer series: DVC.2
    Category: Vibration Dampers
Description: Vibration damper; M4; Ø: 10mm; rubber; L: 10mm; Thread len: 10mm
Thread: M4
Body material: rubber
Plunger material: zinc plated steel
Type of mounting element: vibration damper
Mechanical elements features: with internal and external thread
H dimension: 4mm
D1 dimension: 8mm
Spacer length: 10mm
Thread length: 10mm
Diameter: 10mm
Stiffness: 37N/mm
Static load: 94N
Shore hardness: 40±5
Manufacturer series: DVC.2
auf Bestellung 50 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 33+ | 2.22 EUR | 
| 41+ | 1.77 EUR | 
| 43+ | 1.67 EUR | 
| DVC.1-25-20-20-M6-18-55 |  | 
Hersteller: ELESA+GANTER
Category: Vibration Dampers
Description: Vibration damper; M6; Ø: 25mm; rubber; L: 20mm; Thread len: 18mm
Manufacturer series: DVC.1
Thread: M6
Body material: rubber
Type of mounting element: vibration damper
Mechanical elements features: with external threaded hole on both ends
Plunger material: zinc plated steel
Thread length: 18mm
D1 dimension: 20mm
Spacer length: 20mm
Diameter: 25mm
Shore hardness: 55±5
Stiffness: 180N/mm
Static load: 902N
    Category: Vibration Dampers
Description: Vibration damper; M6; Ø: 25mm; rubber; L: 20mm; Thread len: 18mm
Manufacturer series: DVC.1
Thread: M6
Body material: rubber
Type of mounting element: vibration damper
Mechanical elements features: with external threaded hole on both ends
Plunger material: zinc plated steel
Thread length: 18mm
D1 dimension: 20mm
Spacer length: 20mm
Diameter: 25mm
Shore hardness: 55±5
Stiffness: 180N/mm
Static load: 902N
auf Bestellung 8 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 8+ | 8.94 EUR | 
| VCT.50 FP-M8 |  | 
Hersteller: ELESA+GANTER
Category: Knobs
Description: Knob; Ø: 50mm; Int.thread: M8; 20mm; H: 32mm; technopolymer PP
Type of mounting element: knob
Diameter: 50mm
Internal thread: M8
Thread length: 20mm
Height: 32mm
Body material: technopolymer PP
Body colour: black
Boss material: brass
    Category: Knobs
Description: Knob; Ø: 50mm; Int.thread: M8; 20mm; H: 32mm; technopolymer PP
Type of mounting element: knob
Diameter: 50mm
Internal thread: M8
Thread length: 20mm
Height: 32mm
Body material: technopolymer PP
Body colour: black
Boss material: brass
auf Bestellung 90 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 24+ | 3.05 EUR | 
| 30+ | 2.45 EUR | 
| 31+ | 2.32 EUR | 
| DVA.1-50-25-M10-28-55 |  | 
Hersteller: ELESA+GANTER
Category: Vibration Dampers
Description: Vibration damper; M10; Ø: 50mm; rubber; L: 25mm; Thread len: 28mm
Thread: M10
Type of mounting element: vibration damper
Body material: rubber
Plunger material: steel
Diameter: 50mm
Thread length: 28mm
Spacer length: 25mm
Shore hardness: 55±5
    Category: Vibration Dampers
Description: Vibration damper; M10; Ø: 50mm; rubber; L: 25mm; Thread len: 28mm
Thread: M10
Type of mounting element: vibration damper
Body material: rubber
Plunger material: steel
Diameter: 50mm
Thread length: 28mm
Spacer length: 25mm
Shore hardness: 55±5
auf Bestellung 10 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 10+ | 7.15 EUR | 
| DVA.2-15-30-M4-10-55 |  | 
Hersteller: ELESA+GANTER
Category: Vibration Dampers
Description: Vibration damper; M4; Ø: 15mm; rubber; L: 30mm; Thread len: 10mm
Thread: M4
Body material: rubber
Type of mounting element: vibration damper
Plunger material: steel
H dimension: 4mm
Thread length: 10mm
Diameter: 15mm
Spacer length: 30mm
Shore hardness: 55±5
    Category: Vibration Dampers
Description: Vibration damper; M4; Ø: 15mm; rubber; L: 30mm; Thread len: 10mm
Thread: M4
Body material: rubber
Type of mounting element: vibration damper
Plunger material: steel
H dimension: 4mm
Thread length: 10mm
Diameter: 15mm
Spacer length: 30mm
Shore hardness: 55±5
auf Bestellung 2 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 2+ | 35.75 EUR | 
| 451980 |  | 
Hersteller: ELESA+GANTER
Category: Wheels
Description: Transport wheel; Ø: 60mm; W: 25mm; H: 83mm; torsional; 700N; 71kg
Body material: steel
Height: 83mm
Manufacturer series: RE.C6
Type of mounting element: transport wheel
Wheel width: 25mm
Wheel diameter: 60mm
Shore hardness: 55
Dynamic load: 700N
Force: 71kg
Material: polyurethane; technopolymer PA
Version: assembly pass through hole; torsional
    Category: Wheels
Description: Transport wheel; Ø: 60mm; W: 25mm; H: 83mm; torsional; 700N; 71kg
Body material: steel
Height: 83mm
Manufacturer series: RE.C6
Type of mounting element: transport wheel
Wheel width: 25mm
Wheel diameter: 60mm
Shore hardness: 55
Dynamic load: 700N
Force: 71kg
Material: polyurethane; technopolymer PA
Version: assembly pass through hole; torsional
Produkt ist nicht verfügbar
    Im Einkaufswagen
     Stück im Wert von     UAH
| 451986 |  | 
Hersteller: ELESA+GANTER
Category: Wheels
Description: Transport wheel; Ø: 40mm; W: 18mm; H: 59mm; torsional with lock
Body material: steel
Height: 59mm
Manufacturer series: RE.C6
Type of mounting element: transport wheel
Wheel width: 18mm
Wheel diameter: 40mm
Shore hardness: 55
Dynamic load: 400N
Force: 40kg
Material: polyurethane; technopolymer PA
Version: assembly pass through hole; torsional with lock
    Category: Wheels
Description: Transport wheel; Ø: 40mm; W: 18mm; H: 59mm; torsional with lock
Body material: steel
Height: 59mm
Manufacturer series: RE.C6
Type of mounting element: transport wheel
Wheel width: 18mm
Wheel diameter: 40mm
Shore hardness: 55
Dynamic load: 400N
Force: 40kg
Material: polyurethane; technopolymer PA
Version: assembly pass through hole; torsional with lock
Produkt ist nicht verfügbar
    Im Einkaufswagen
     Stück im Wert von     UAH
| 449621 |  | 
Hersteller: ELESA+GANTER
Category: Wheels
Description: Transport wheel; Ø: 200mm; W: 50mm; H: 240mm; torsional with lock
Manufacturer series: RE.E2-N
Type of mounting element: transport wheel
Version: torsional with lock; with mounting plate
Height: 240mm
Wheel width: 50mm
Wheel diameter: 200mm
Shore hardness: 83
Rolling load: 1.4kN
Dynamic load: 2.25kN
Force: 142kg
Material: rubber; technopolymer PP
Body material: steel
    Category: Wheels
Description: Transport wheel; Ø: 200mm; W: 50mm; H: 240mm; torsional with lock
Manufacturer series: RE.E2-N
Type of mounting element: transport wheel
Version: torsional with lock; with mounting plate
Height: 240mm
Wheel width: 50mm
Wheel diameter: 200mm
Shore hardness: 83
Rolling load: 1.4kN
Dynamic load: 2.25kN
Force: 142kg
Material: rubber; technopolymer PP
Body material: steel
auf Bestellung 2 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 2+ | 52.94 EUR | 
| GN 1366-ST-60-40-A-BL |  | 
Hersteller: ELESA+GANTER
Category: Hinges
Description: Hinge; Width: 60mm; steel; H: 40mm; without coating,for welding
Material: steel
Height: 40mm
Width: 60mm
Version: for welding; without coating
Type of mounting element: hinge
    Category: Hinges
Description: Hinge; Width: 60mm; steel; H: 40mm; without coating,for welding
Material: steel
Height: 40mm
Width: 60mm
Version: for welding; without coating
Type of mounting element: hinge
auf Bestellung 15 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 5+ | 16.29 EUR | 
| 10+ | 14.14 EUR | 
| M.1043/30-350-EP |  | 
Hersteller: ELESA+GANTER
Category: Handles
Description: Holder; aluminium; black; H: 78mm; L: 374mm; Holes pitch: 350mm; oval
Plating material: epoxy resin
Trade name: handle
Type of mounting element: holder
Shape: oval
Height: 78mm
Mounting holes pitch: 350mm
Length: 374mm
Diameter: 30mm
Material: aluminium
Colour: black
    Category: Handles
Description: Holder; aluminium; black; H: 78mm; L: 374mm; Holes pitch: 350mm; oval
Plating material: epoxy resin
Trade name: handle
Type of mounting element: holder
Shape: oval
Height: 78mm
Mounting holes pitch: 350mm
Length: 374mm
Diameter: 30mm
Material: aluminium
Colour: black
Produkt ist nicht verfügbar
    Im Einkaufswagen
     Stück im Wert von     UAH
| DIN 906-ST-M20X1,5-A |  | 
Hersteller: ELESA+GANTER
Category: Breather Caps and Plugs
Description: Hexagon head screw plug; without micro encapsulation; steel
Type of mounting element: Hexagon head screw plug
Version: without micro encapsulation
Thread: M20
Spanner size: HEX 10mm
Thread pitch: 1.5
Plating material: zinc
Body material: steel
Kind of thread: conical
DIN standard: DIN 906
    Category: Breather Caps and Plugs
Description: Hexagon head screw plug; without micro encapsulation; steel
Type of mounting element: Hexagon head screw plug
Version: without micro encapsulation
Thread: M20
Spanner size: HEX 10mm
Thread pitch: 1.5
Plating material: zinc
Body material: steel
Kind of thread: conical
DIN standard: DIN 906
auf Bestellung 26 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 26+ | 2.75 EUR | 
| VCT.25 P-M5X25-C9 |  | 
Hersteller: ELESA+GANTER
Category: Knobs
Description: Knob; Ø: 25mm; Ext.thread: M5; 25mm; H: 19mm; technopolymer PA
Type of mounting element: knob
Diameter: 25mm
Thread length: 25mm
Height: 19mm
Body material: technopolymer PA
Body colour: black
Plunger material: zinc plated steel
Cap colour: black
Thread pitch: 0.8
External thread: M5
    Category: Knobs
Description: Knob; Ø: 25mm; Ext.thread: M5; 25mm; H: 19mm; technopolymer PA
Type of mounting element: knob
Diameter: 25mm
Thread length: 25mm
Height: 19mm
Body material: technopolymer PA
Body colour: black
Plunger material: zinc plated steel
Cap colour: black
Thread pitch: 0.8
External thread: M5
auf Bestellung 48 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 48+ | 1.49 EUR | 
| VCT.25 P-M5X20 |  | 
Hersteller: ELESA+GANTER
Category: Knobs
Description: Knob; Ø: 25mm; Ext.thread: M5; 20mm; H: 19mm; technopolymer PA
Type of mounting element: knob
Diameter: 25mm
Thread length: 20mm
Height: 19mm
Body material: technopolymer PA
Body colour: black
Plunger material: zinc plated steel
Thread pitch: 0.8
Cap colour: black
External thread: M5
    Category: Knobs
Description: Knob; Ø: 25mm; Ext.thread: M5; 20mm; H: 19mm; technopolymer PA
Type of mounting element: knob
Diameter: 25mm
Thread length: 20mm
Height: 19mm
Body material: technopolymer PA
Body colour: black
Plunger material: zinc plated steel
Thread pitch: 0.8
Cap colour: black
External thread: M5
auf Bestellung 104 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 51+ | 1.42 EUR | 
| 62+ | 1.16 EUR | 
| 64+ | 1.13 EUR | 
| 67+ | 1.07 EUR | 
| 70+ | 1.03 EUR | 
| GN 438-25-3-4-A-70 |  | 
Hersteller: ELESA+GANTER
Category: Feet
Description: Washer; Base dia: 25mm; zinc plated steel; H: 3mm; Plating: rubber
Plating material: rubber
Mounting: screw
Type of mounting element: washer
Body material: zinc plated steel
Height: 3mm
Hole diameter: 4mm
Base diameter: 25mm
Shore hardness: 70
    Category: Feet
Description: Washer; Base dia: 25mm; zinc plated steel; H: 3mm; Plating: rubber
Plating material: rubber
Mounting: screw
Type of mounting element: washer
Body material: zinc plated steel
Height: 3mm
Hole diameter: 4mm
Base diameter: 25mm
Shore hardness: 70
auf Bestellung 10 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis | 
|---|---|
| 10+ | 7.15 EUR | 
| GN449.5-61-OS-PL |  | 
Hersteller: ELESA+GANTER
Category: Latches
Description: Lock; without cylinder; stainless steel; Closing: snap fastener
Type of mounting element: lock
Closing system: snap fastener
Version: without cylinder
Material: stainless steel
    Category: Latches
Description: Lock; without cylinder; stainless steel; Closing: snap fastener
Type of mounting element: lock
Closing system: snap fastener
Version: without cylinder
Material: stainless steel
Produkt ist nicht verfügbar
    Im Einkaufswagen
     Stück im Wert von     UAH
| GN449.5-61-SC-PL |  | 
Hersteller: ELESA+GANTER
Category: Latches
Description: Lock; stainless steel
Type of mounting element: lock
Information: lock with one combination, all locks have the same combination and can be opened with the same key
Material: stainless steel
    Category: Latches
Description: Lock; stainless steel
Type of mounting element: lock
Information: lock with one combination, all locks have the same combination and can be opened with the same key
Material: stainless steel
Produkt ist nicht verfügbar
    Im Einkaufswagen
     Stück im Wert von     UAH