Produkte > PMP

Wählen Sie Seite:    << Vorherige Seite ]  1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18  Nächste Seite >> ]
BezeichnungHerstellerBeschreibungVerfügbarkeitPreis
PMP6090WSensata-CrydomDescription: SSR RELAY SPST-NO 90A 42-600V
Voltage - Load: 42 V ~ 600 V
Approval Agency: CE, cURus, EMC, IEC
Load Current: 90 A
Termination Style: Screw Terminal
Operating Temperature: -25°C ~ 70°C
Circuit: SPST-NO (1 Form A)
Voltage - Input: 4 ~ 20mA, 0 ~ 10VDC
Mounting Type: Chassis Mount
Output Type: AC, Proportional Control
Package / Case: Module
Packaging: Bulk
Produkt ist nicht verfügbar
Mindestbestellmenge: 10 Stücke
Im Einkaufswagen  Stück im Wert von  UAH
PMP6090WCrydomSolid State Relays - SSRs 90A 420-600VAC Elevator Screw
Produkt ist nicht verfügbar
Mindestbestellmenge: 10 Stücke
Im Einkaufswagen  Stück im Wert von  UAH
PMP6090WHSensata-CrydomDescription: SSR RELAY SPST-NO 90A 42-600V
Voltage - Load: 42 V ~ 600 V
Approval Agency: CE, cURus, EMC, IEC
Load Current: 90 A
Termination Style: Screw Terminal
Operating Temperature: -25°C ~ 70°C
Circuit: SPST-NO (1 Form A)
Voltage - Input: 4 ~ 20mA, 0 ~ 10VDC
Mounting Type: Chassis Mount
Output Type: AC, Proportional Control
Package / Case: Module
Packaging: Bulk
Produkt ist nicht verfügbar
Mindestbestellmenge: 10 Stücke
Im Einkaufswagen  Stück im Wert von  UAH
PMP6090WHCrydomSolid State Relays - SSRs 90A 420-600VAC TP, Elevator Screw
Produkt ist nicht verfügbar
Mindestbestellmenge: 10 Stücke
Im Einkaufswagen  Stück im Wert von  UAH
PMP6090WPSensata-CrydomDescription: SSR RELAY SPST-NO 90A 42-600V
Voltage - Load: 42 V ~ 600 V
Approval Agency: CE, cURus, EMC, IEC
Load Current: 90 A
Termination Style: Screw Terminal
Operating Temperature: -25°C ~ 70°C
Circuit: SPST-NO (1 Form A)
Voltage - Input: 4 ~ 20mA, 0 ~ 10VDC
Mounting Type: Chassis Mount
Output Type: AC, Proportional Control
Package / Case: Module
Packaging: Bulk
Produkt ist nicht verfügbar
Mindestbestellmenge: 10 Stücke
Im Einkaufswagen  Stück im Wert von  UAH
PMP6090WPCrydomSolid State Relays - SSRs 90A 420-600VAC IOP, Elevator Scrw
Produkt ist nicht verfügbar
Mindestbestellmenge: 10 Stücke
Im Einkaufswagen  Stück im Wert von  UAH
PMP6090WPHCrydomSolid State Relays - SSRs 90A 420-600VAC IOP/TP Elevator Scrw
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP6090WPHSensata-CrydomDescription: SSR RELAY SPST-NO 90A 42-600V
Packaging: Bulk
Package / Case: Module
Output Type: AC, Proportional Control
Mounting Type: Chassis Mount
Voltage - Input: 4 ~ 20mA, 0 ~ 10VDC
Circuit: SPST-NO (1 Form A)
Operating Temperature: -25°C ~ 70°C
Termination Style: Screw Terminal
Load Current: 90 A
Approval Agency: CE, cURus, EMC, IEC
Voltage - Load: 42 V ~ 600 V
Produkt ist nicht verfügbar
Mindestbestellmenge: 10 Stücke
Im Einkaufswagen  Stück im Wert von  UAH
PMP6251Texas InstrumentsPower Management IC Development Tools PMP6251 is a reference design for 150W LCD TV power by using the UCC28051 to construct PFC, UCC25600 to construct LED driver LLC converter, UCC24610 to construct SR circuit and UCC28610 to construct standby flyback co
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP6252Texas InstrumentsPower Management IC Development Tools PMP6252 is a reference design for 90W LCD TV power by using the UCC28051 to construct PFC, UCC25710 to construct LED driver LLC converter, UCC25600 to construct 5V and 12V converter and UCC28610 to construct standby f
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP6536Texas InstrumentsPower Management IC Development Tools The PMP6536 reference design uses the UCC28610 quasi-resonant flyback controller in conjunction with the UCC24610 synchronous rectifier controller to provide good efficiency at heavy loads while maintaining low power
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP6545Texas InstrumentsPower Management IC Development Tools This reference design uses the TPS40210 current mode controller in a SEPIC converter to generate a 12V/1A output from a wide 10V - 100V DC input.
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP6584Texas InstrumentsDigital Isolators PMP6584 is a high power (non-standard) Power Over Ethernet (POE) active clamp forward converter. It features the TPS23756, which is a combination of a POE Powered Device (PD) controller and PWM controller. It also utilizes an ISO721 digi
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP6588Texas InstrumentsPower Management IC Development Tools This reference design provides a compact power solution for 70W (peak) audio systems. This supply accepts a universal AC input, and uses a UCC28610 quasi-resonant flyback controller to generate an isolated 24V. Auxili
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP6595Texas InstrumentsPower Management IC Development Tools This reference design uses the TPS40210 current mode controller to generate a 19V/0.5A output from a 5V input voltage. This circuit achieves greater than 92% efficiency at full load.
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP6596Texas InstrumentsPower Management IC Development Tools This reference design uses the TPS40210 current mode controller to generate a 19V/0.5A output from a 12V input voltage. This circuit achieves greater than 95% efficiency at full load.
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP6680Texas InstrumentsPower Management IC Development Tools The PMP6680 non-isolated DC/DC reference design uses the TPS40170 with a 43V-53V input and a 12V output to deliver up to 20A. The design achieves around 97% peak efficiency at 12A while using surface mount power MOSFE
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP6703Texas InstrumentsPower Management IC Development Tools This reference design uses the TPS40170 sync-buck voltage-mode controller to step 24V nominal (35V max) input down to 12V/20A. An external control signal can allow the circuit to enter hysteretic-mode operation while
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP6710Texas InstrumentsPower Management IC Development Tools The PMP6710 reference design uses the UCC28610 green-mode flyback controller to drive a low-cost, high-voltage BJT as the main switch. The maximum load efficiency is over 80%, while the no load power consumption is on
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP6711Texas InstrumentsPower Management IC Development Tools The PMP6711 reference design provides an isolated 5.5V at 250mA from a 120VAC/60Hz input in less than 1 square inch of board space. This design uses the TPS40210 in an isolated SEPIC topology with primary side regulat
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP6712Texas Instruments PMP6712 is a phase-shifted full-bridge converter capable of delivering 1600W of isolated output power and achieving efficiency of greater than 96%. This design uses the UCC28950 controller in a dual phase master-slave configuration. An LM5017 constan
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP6720Texas Instruments This design uses the UCC3895 Phase Shifted Full Bridge controller in a 48 volt to 14 volt at 20 amp isolated DC to DC converter. The converter achieves 94% efficiency with simple diode rectification.
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP6740Texas InstrumentsPower Management IC Development Tools The PMP6740 reference design provides 12V at 18W from a universal AC input of 90VAC-265VAC input. This design uses the TL2844 controller with primary side regulation (no optocoupler) for a low cost power solution.
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP6741Texas InstrumentsPower Management IC Development Tools The PMP6741 reference design provides 24V at 12W(peak) and 6W(average) from a ultra-wide range 85VAC-576VAC input. This design uses the TL2844 controller and a high voltage BJT for a low cost solution for power meters
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP6753Texas InstrumentsTexas Instruments The PMP6753 reference design provides 3.3V at 25A from a wide range 18V-60V telecom input with greater than 94% efficiency. This design uses the UCC2897A active clamp controller along with Texas Instruments' NexFET power MOSFETs for sync
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP6788Texas InstrumentsPower Management IC Development Tools The PMP6788 reference design uses the UCC28610 green-mode flyback controller to drive a low-cost, high-voltage BJT as the main switch. The maximum load efficiency is over 80%, while the no load power consumption remai
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP6867Texas InstrumentsPower Management IC Development Tools This reference design uses the TPS40170 sync buck controller in a buck-boost converter to regulate the current in a series string of 6 to 8 LEDs (-28V) at up to 1.5A. Efficiency is greater than 93%. The output current
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP6910Texas InstrumentsPower Management IC Development Tools The PMP6910 reference design delivers an isolated 55V at 2A with PFC from a universal AC input. This design is a modified version of the UCC28600 EVM. The PFC boost portion of the design is unchanged from the original
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP6943Texas InstrumentsPower Management IC Development Tools The PMP6943 reference design provides 28V at 100W (3.6A) from a standard 24V telecom input with greater than 92% efficiency. This design uses the TPS40210 to control a diode rectified flyback converter for a low cost
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP6963Texas InstrumentsPower Management IC Development Tools This reference design uses the TPS40210 current mode controller to generate an isolated 56V/0.35A output from a wide 9V - 57V DC input. This design uses diode rectification on the output stage and achieves efficiencie
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP6998Texas InstrumentsPower Management IC Development Tools The PMP6998 reference design is an isolated Flyback which uses an LM5072 and is intended for Power over Ethernet (PoE) applications. It can generate isolated outputs of 3.3 Volts at 3.3 Amps and 5 Volts at 2 Amps from
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP6NGCarlo Gavazzi Inc.Description: SENSOR RETRO POL 6M NPN
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP6PICarlo Gavazzi Inc.Description: SENSOR RETRO POL 6M PNP
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP6RGCarlo Gavazzi Inc.Description: SENSOR RETROREFLECTIVE 6M RELAY
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP6RGTCarlo Gavazzi Inc.Description: SENSOR RETRO POL 6M RETRO
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP6RGTCarlo GavazziPhotoelectric Sensors Polarized Retro-reflective, Photoelectric Sensor, range 12 m, Polarized Red modulated light 660nm, Power Supply 10.8-264VDC&21.6-264VAC, Relay SPDT, NO+NC, Terminals, IP67. PG13.5, Time delay
Produkt ist nicht verfügbar
Mindestbestellmenge: 5 Stücke
Im Einkaufswagen  Stück im Wert von  UAH
PMP6RITCarlo Gavazzi Inc.Description: SENSOR RETRO POL 6M RETRO
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7006Texas Instruments PMP7006 is a primary side regulated, isolated DC/DC converter for low loads like sensors. It is a small solution at low costs.
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7026Texas InstrumentsPower Management IC Development Tools The PMP7026 reference design uses the TPS54227 synchronous step-down converter to generate a non-isolated output (3.3V @ 1A). Adaptive on-time D-CAP2 mode provides a fast transient response with no external compensati
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7040Texas InstrumentsPower Management IC Development Tools The PMP7040.1(20V@0.25A) reference design is a Isolated DCM Flyback for 3phase smart meter,147-400VAC,20V@0.25A - multiple outputs Flyback which uses a UCC28610 and was intended for Metering applications. It can gener
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7073Texas InstrumentsPower Management IC Development Tools The PMP7073(24V@1A) reference design is a CCM SEPIC which uses a TPS40210 and was intended for Consumer Electronics applications. It can generate a Non-Isolated 24 volt output at 1 Amp from an input applications.10 to
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7146Texas InstrumentsTexas Instruments The PMP7146 has been designed especially for E-meters with PLC (power line communication) on board. The input filter shows high impedance to the PLC transmitter and the controller LM5021 works in constant switching frequency. A settable
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7148Texas InstrumentsPower Management IC Development Tools This reference design is a quasi-resonant isolated flyback. The input voltage is the universal 85 - 265V AC range and two outputs provide 5V @ 250mA, from an LDO, and a regulated 24V @ 700mA, 2.5A peak for 30milliseco
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7154Texas InstrumentsPower Management IC Development Tools This reference design operates over an 8V - 16V input range and delivers 5V @ 1A at the output. This design is content from the presentation material of the TI Power Workshop. This design has been built and tested and
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7182Texas InstrumentsPower Management IC Development Tools The PMP7182.1(3.3V@0.2A) reference design is a 3.5W Quasi Resonant Flyback which uses a LM5023 and was intended for Consumer Electronics applications. It can generate an Isolated 3.3 volt output at 0.2 Amps from an in
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7207Texas InstrumentsPower Management IC Development Tools The PMP7207 reference design operates over an 8V - 16V input range and delivers -12V @ 1A at the output. This design is content from the presentation material of the TI Power Workshop.
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7233Texas InstrumentsTexas Instruments This design is a cranking simulator which generates three different cranking pulses to test automotive systems up to 50W. A microcontroller sets the output voltage of a synchronous buck in the range of 2-15V accordingly to the programmed
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7246Texas InstrumentsPower Management IC Development Tools This is a 350W High Speed Full Bridge Phase Shift ZVT Synchronous Rectification DC/DC reference design. It is built for telecom applications to supply a RF Power Amplifier stage. The design is utilizing UCC28950 volta
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7249Texas Instruments Low component count and low cost isolated flyback, converting the high line mains (180Vac 275Vac) to 12V@1A, 1.2Amax. Thanks to the UCC28700 controller, no optocoupler is needed to close the loop.
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7263Texas InstrumentsPower Management IC Development Tools This reference design uses the UCC28600 quasi-resonant flyback controller to generate isolated +12V/250mA and -12V/10mA outputs from a universal AC input. The energy saving features of the UCC28600 minimize power loss
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7279Texas InstrumentsPower Management IC Development Tools The PMP7279 reference design provides 24V at 72W (3A) from a wide ranging 18VDC to 57VDC input with 92% efficiency. This design uses the TPS40210 to control a diode rectified flyback converter for a low cost and effic
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7305Texas InstrumentsPower Management IC Development Tools The PMP7305 reference design uses the LM5022 in a SEPIC configuration to generate 12V@2A. The design offers efficiency of up to 90% and has a small size.
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7315Texas InstrumentsPower Management IC Development Tools The PMP7316 reference design uses the LM5017 to generate a 24V output at 100 mA. The inductor has reinforced isolation and the input voltage range is from 18V to 30V DC.
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7316Texas InstrumentsPower Management IC Development Tools The PMP7316 reference design uses the LM5017 to generate a 24V output at 100 mA. The inductor has reinforced isolation and the input voltage range is from 18V to 30V DC.
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7327Texas InstrumentsPower Management IC Development Tools This reference design uses the BQ24640 super cap charging controller to charge a large bank of super caps to a voltage below the input bus voltage. During an input bus dropout, the energy from the super caps is used t
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7338Texas InstrumentsPower Management IC Development Tools The PMP7338 reference design uses the LM5022 in a SEPIC configuration to generate 12V@4A. The design offers efficiency up to 90% and small size.
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7383Texas Instruments The PMP7383 uses the LM5017 in fly-buck configuration from telecom input voltages to provide two 3.3V outputs, rated at 50 and 400mA. It provides isolation on the 3.3V @ 400mA output for safety purposes.
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7389Texas InstrumentsPower Management IC Development Tools The PMP7389 reference design uses the UCC28610 and UCC24610 in a Quasi Resonant Flyback to generate 5V. Two ports support dual charging of devices at up to 2.1A for USB charging. The TPS2511 USB power switch also offe
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7390American P.C.B CompanyDescription: EVAL BOARD FOR TPS2511 TPS40170
Packaging: Box
Function: *
Type: Reference Design
Contents: Unpopulated (Bare) Board(s)
Utilized IC / Part: TPS2511, TPS40170
Supplied Contents: Unpopulated (Bare) Board(s)
Embedded: No
Part Status: Discontinued at Digi-Key
auf Bestellung 7 Stücke:
Lieferzeit 10-14 Tag (e)
1+21.14 EUR
Im Einkaufswagen  Stück im Wert von  UAH
PMP7390Texas InstrumentsPower Management IC Development Tools Using the TPS40170 PWM Buck Controller, this power management reference design provides a regulated 5V to power 2 USB ports at 2.1A each (total 4.2A) in a small form-factor. The design has been optimized for a nominal
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7391Texas InstrumentsPower Management IC Development Tools This reference design uses the UCC2894 to control an active clamp forward converter that generates an isolated 24 V at 7 A from a 380-VDC input. This supply is intended to be used with a PFC boost front end and requir
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7423Texas Instruments This 12V input boost converter provides a 24V output at 0.833A (20W). PMP7423 REVB assembly is built on the TPS55340, high voltage boost converter, EVM. It has a maximum component height of 2.1mm and achieves >93% efficiency at 1MHz. This design is a
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7424Texas Instruments This single cell Li-Ion battery-input boost converter provides an 8V output at 3A (24W). Its output is adjustible between 5V and 8V, and achieves 92% efficiency (8V out) at 475KHz. This design uses the LM3481 boost converter.
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7426Texas Instruments This single cell Li-Ion battery input boost converter provides a 5.3V output at 1.1A (5.8W). It achieves 90% efficiency at full load and operates at 1MHz. PMP7426 uses the TPS55340 high voltage boost converter.
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7752Texas Instruments It is a TRAIC dimmable offline flyback LED driver using LM3445. It has an adaptive constant off-time AC/DC constant current controller feature. It can be used with input supply of 230V AC and can light 7 LEDs in string supplying 420mA of current.
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7755Texas Instruments PMP7755 is a non-synchronous buck controller for LM3409 with 24V DC input and 18V output @ 4.2A. The load is 9 strings with 6 LEDs per string. It uses a motion detector with PIR (passive infarared) dimming as well as 0-10V analog dimming. It has diff
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7760Texas Instruments PMP7760 is a high voltage flyback DC-DC converter with Q100 and D100 qualification. The design includes an external bias supply to withstand 800V. LM5022 used in the circuit has additional features like an error amplifier, precision reference, line u
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7761Texas Instruments It is a High current Non Synchronous buck DC-DC LED driver. The LM3409 uses Constant Off-Time (COFT) control to regulate an accurate constant current without the need for external control loop compensation. Analog and PWM dimming are easy to implemen
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7772Texas Instruments PMP7772 is a non sync buck regulator. It has an input of 20V to 27V and output of 4.5V to 17V @ 1.4A. LM5575 uses Emulated Current Mode control architecture which provides inherent line regulation, tight load transient response and ease of loop compe
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7798Texas Instruments Based on the Wide VIN COT Sync Buck regulator LM5017, this FlyBuck circuit provides excellent regulation for two isolated outputs and one non-isolated output. Compared with a conventional Flyback circuit, this design features a smaller board size and
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7818Texas InstrumentsPower Management IC Development Tools The PMP7818 reference design is a Flyback which uses a LM5017 and was intended for Communications and Telecom applications. It can generate an Isolated 5 volt output at 0.6 Amps from an input 21.6 to 26.4 Volts DC.
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7883Texas Instruments The following design, driven by the LM5023, takes an AC input, like the ones located in the common US power outlet, and generates 5V/12V out, 2A DC signal, outputs commonly used for USB connections.
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7892Texas Instruments PMP7892 is an isolated active clamp forward converter capable of 42W output power. This design uses the LM5026 active clamp current-mode controller. Output voltage regulation is maintained using an LMV431 shunt regulator and opto-coupler feedback. Sc
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7899Texas Instruments PMP7899 is an isolated flyback converter utilizing the LM5022 for industrial applications. This design has a minimum operating input voltage of 8V and a maximum input voltage of 18V. A custom flyback transformer from Coilcraft is used in this design.
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7902Texas Instruments PMP7902 is an Isolated Flyback converter utilizing the LM5001 non-synchronous current-mode regulator I.C. The design accepts an input voltage of 4.5V to 5.5V and provides an isolated 5V output capable of supplying 0.25A of current to the load. The de
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7905Texas Instruments PMP7905 is a two-switch buck-boost converter capable of 120W output power. This design uses the LM5118 wide voltage range buck-boost controller. 100V Schottky rectifiers and MOSFET are used for input switching, while 30V Schottky rectifiers and MOSFE
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7916Texas Instruments The PMP7916 is a boost converter that can be used by a voltage quality module in a start-stop car to condition the battery voltage seen by electronic loads. For such a car to utilize existing electronic assemblies, input voltage to the assemblies is
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7919Texas Instruments The PMP7919 is a 2-phase synchronous boost converter that can take a minimum 5.5V input and put out 11.5V or higher at 15A. It is used in the Voltage Quality Module in a start-stop vehicle where warm cranking is not allowed to cause certain electroni
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7933Texas Instruments PMP7933 is a single-phase synchronous boost converter using the LM5122 controller IC. The design accepts an input voltage of 48Vin +/-5% and provides an output voltage of 100Vout capable of supplying a maximum of 1A of current to the load. The design
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7936Texas Instruments PMP7936 is a boost converter capable of 138W output power and targeted for automotive appli-cations. This design uses the LM5122 synchronous boost current-mode PWM controller. The circuit will start at a minimum input of 6.5V and has an operating inp
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7941Texas InstrumentsPower Management IC Development Tools This reference design uses the LM5017 Flybuck regulator to generate two 12V output at 250mA. One output is at the primary side and the other is on the isolated secondary side. By reverse the output and ground connecti
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7942Texas InstrumentsPower Management IC Development Tools This reference design uses the LM5017 Flybuck regulator to generate two outputs: one on the primary side is 5V at 250mA, and the other on the isolated secondary is 15V at 100mA. The input range is from 17V to 32V.
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7953Texas Instruments A flybuck converter using the LM5017 synchronous buck regulator, which accepts an input voltage of 36Vin to 60Vin and provides two outputs: one non-isolated output of 15Vout capable of supplying 0.05A and an isolated output of 15Vout capable of suppl
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7966Texas Instruments PMP7966 is a 4-phase boost converter rated for 52V output at 2.5A from an input voltage of 6V to 42V. This design uses LM5122 boost controllers at a switching frequency of 100 kHz each phase, resulting in 400 kHz input and output ripple. 680 F alumin
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7967Texas Instruments The PMP7967 converts a DC input of 6V-42V to an output of 90V at 1.5A. The design uses four interleaved LM5122 boost controllers with each controller switching at 100kHz. The resulting 4-phase boost converter has a ripple frequency of 400kHz. Freqeuc
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7970Texas Instruments PMP7970 is a synchronous boost converter utilizing the LM5122 for industrial applications. This design has a minimum operating input voltage of 12V and a maximum input voltage of 54V. Capable of deliverying 135W power to the load.
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7979Texas Instruments PMP7979 is a synchronous dual-phase boost power supply using the LM5122 controllers. The design accepts an input voltage of 12 V to 67 V, and boosts a 54-V output rail that is capable of sourcing 4.8-A continuous current. The LM5122 has an internal c
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7983Texas Instruments PMP7983 is a buck-boost converter rated for 12V output at 0.5A from an input voltage of 10V to 16V. This design uses the LM25118 buck-boost controller at a switching frequency of 100 kHz.
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7991Texas Instruments PMP7991 is a quasi-resonant isolated flyback using the LM5023 controller IC. The design accepts an input voltage of 85VAC to 265VAC and provides a selectable output of 12Vout or 5Vout capable of supplying 2A of current to the load. The quasi-resonant
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7993American P.C.B CompanyDescription: PCB FOR TI-BASED REF DES PMP7993
Produkt ist nicht verfügbar
Mindestbestellmenge: 50 Stücke
Im Einkaufswagen  Stück im Wert von  UAH
PMP7993Texas InstrumentsNetworking Development Tools The LM5017 Flybuck reference design provides multiple isolated outputs to supply the bias voltage needed in a PLC I/O module. It generates 4 isolated outputs: 15V@50mA and 5V@100mA; it can cover most of the required voltage ra
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP7995Texas Instruments PMP7995 is a buck-boost converter rated for 12V output at 2A from an input voltage of 5V to 60V. This design uses the LM5118 buck-boost controller at a switching frequency of 300 kHz. To minimize cost the layout was done for a 2 layer printed circuit
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP8000Texas Instruments PMP8000 is a single-phase synchronous buck converter rated for 5V output at 30A from an input voltage of 12V. This design uses the LM27403 synchronous buck controller and CSD87350Q5D power block MOSFETs provide maximum efficiency when combined with a
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP8003Texas InstrumentsPower Management IC Development Tools This demonstration board highlights the performance of a LM3492 - 7watt LED driver that can be used to power a single / double LED string consisting of 6 / 7 series connected LEDs with 360mA from an Electronic Transfr
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP8286Texas InstrumentsPower Management IC Development Tools This reference design uses the UCC28700 in a quasi-resonant flyback to generate an isolated 5V at up to 2.1A. The UCC28700 implements primary-side regulation, eliminating the need for an opto-coupler and reducing the
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP8313Texas Instruments This SEPIC converter provides 12W (12V at 1A) over an input voltage range of 8V to 48V. PMP8313 uses the TPS40210 current mode boost converter.
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP8362Texas InstrumentsPower Management IC Development Tools This reference design uses the UCC28610 quasi-resonant flyback controller to generate isolated 7.5V and 12V outputs from a universal AC input. The 7.5V output is designed to provide up to 1.3A of output current, while
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP8372American P.C.B CompanyDescription: PCB FOR TI-BASED REF DES PMP8372
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP8477Texas InstrumentsPower Management IC Development Tools The PMP8477 reference design uses the UCC28700 primary-side regulated flyback controller to generate a 5V/2A output from a standard 120VAC input. The valley switching of the UCC28700 allows this low-cost design to ach
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
PMP8493Texas Instruments This synchronous buck regulator provides 96% efficiency when regulating 24Vin to 15V out @ 5A. The output can be set to regulate 12V , if desired. PMP8493 uses TPS40170 wide input synchronous buck controller.
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
Wählen Sie Seite:    << Vorherige Seite ]  1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18  Nächste Seite >> ]