Produkte > VöLKEL > Alle Produkte des Herstellers VÖLKEL (60) > Seite 1 nach 1

Foto Bezeichnung Hersteller Beschreibung Verfügbarkeit
Preis
04028 04028 VÖLKEL VCOIL_04001_EN.pdf Category: General Purpose Tools - Others
Description: Tools set: for thread repair; Holder: hand; Thread: M14; Pitch: 2
Type of tools set: for thread repair
Kind of holder: hand
Thread: M14
Thread pitch: 2
Kind of thread: metric
auf Bestellung 2 Stücke:
Lieferzeit 14-21 Tag (e)
2+51.65 EUR
Mindestbestellmenge: 2
Im Einkaufswagen  Stück im Wert von  UAH
04090 VÖLKEL VCOIL_04090_EN.pdf Category: General Purpose Tools - Others
Description: Tools set: for thread repair
Type of tools set: for thread repair
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
04091 VÖLKEL VCOIL_04090_EN.pdf Category: General Purpose Tools - Others
Description: Tools set: for thread repair
Type of tools set: for thread repair
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
04092 VÖLKEL VCOIL_04090_EN.pdf Category: General Purpose Tools - Others
Description: Tools set: for thread repair
Type of tools set: for thread repair
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
04093 VÖLKEL VCOIL_04090_EN.pdf Category: General Purpose Tools - Others
Description: Tools set: for thread repair
Type of tools set: for thread repair
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
04094 VÖLKEL VCOIL_04090_EN.pdf Category: General Purpose Tools - Others
Description: Tools set: for thread repair
Type of tools set: for thread repair
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
04095 VÖLKEL VCOIL_04090_EN.pdf Category: General Purpose Tools - Others
Description: Tools set: for thread repair
Type of tools set: for thread repair
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
04096 VÖLKEL VCOIL_04090_EN.pdf Category: General Purpose Tools - Others
Description: Tools set: for thread repair
Type of tools set: for thread repair
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
04097 VÖLKEL VCOIL_04090_EN.pdf Category: General Purpose Tools - Others
Description: Tools set: for thread repair
Type of tools set: for thread repair
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
04102 04102 VÖLKEL VCOIL_04100_EN.pdf Category: General Purpose Tools - Others
Description: Tools set: for thread repair; Holder: hand; Thread: UNC 6-32
Type of tools set: for thread repair
Kind of holder: hand
Thread: UNC 6-32
Kind of thread: inch; UNC
auf Bestellung 2 Stücke:
Lieferzeit 14-21 Tag (e)
2+35.75 EUR
Mindestbestellmenge: 2
Im Einkaufswagen  Stück im Wert von  UAH
25707 25707 VÖLKEL VOLKEL-25707.pdf Category: Threading Dies and Taps
Description: Tap; PG7; L: 70mm; Holder: hand; 7mm; Thread: PG; 2pcs.
Type of tool: tap
Thread: PG7
Length: 70mm
Conform to the norm: DIN 40432
Kind of holder: hand
Holder socket size - mm: 7mm
Material: high speed steel grounded HSS-G
Kind of thread: PG
Tools application: for blind holes; to the through holes
Quantity in set/package: 2pcs.
Application: for cable glands
auf Bestellung 1 Stücke:
Lieferzeit 14-21 Tag (e)
1+71.5 EUR
Im Einkaufswagen  Stück im Wert von  UAH
25711 25711 VÖLKEL VOLKEL-25707.pdf Category: Threading Dies and Taps
Description: Tap; PG11; L: 80mm; Holder: hand; 11mm; Thread: PG; 2pcs.
Type of tool: tap
Thread: PG11
Length: 80mm
Conform to the norm: DIN 40432
Kind of holder: hand
Holder socket size - mm: 11mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Application: for cable glands
Kind of thread: PG
Quantity in set/package: 2pcs.
auf Bestellung 1 Stücke:
Lieferzeit 14-21 Tag (e)
1+71.5 EUR
Im Einkaufswagen  Stück im Wert von  UAH
25716 25716 VÖLKEL VOLKEL-25707.pdf Category: Threading Dies and Taps
Description: Tap; PG16; L: 80mm; Holder: hand; 14.5mm; Thread: PG; 2pcs.
Kind of thread: PG
Tools application: for blind holes; to the through holes
Application: for cable glands
Kind of holder: hand
Material: high speed steel grounded HSS-G
Conform to the norm: DIN 40432
Thread: PG16
Type of tool: tap
Holder socket size - mm: 14.5mm
Length: 80mm
Quantity in set/package: 2pcs.
auf Bestellung 1 Stücke:
Lieferzeit 14-21 Tag (e)
1+84.54 EUR
Im Einkaufswagen  Stück im Wert von  UAH
26304 26304 VÖLKEL VOLKEL-26304.pdf Category: Threading Dies and Taps
Description: Tap; M2,5; 0.35; L: 40mm; Holder: hand; 2.1mm; Thread: fine thread
Type of tool: tap
Thread: M2,5
Thread pitch: 0.35
Length: 40mm
Conform to the norm: DIN 2181
Kind of holder: hand
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Quantity in set/package: 2pcs.
Kind of thread: fine thread
auf Bestellung 3 Stücke:
Lieferzeit 14-21 Tag (e)
3+23.84 EUR
Mindestbestellmenge: 3
Im Einkaufswagen  Stück im Wert von  UAH
26314 26314 VÖLKEL VOLKEL-26304.pdf Category: Threading Dies and Taps
Description: Tap; M5; 0.5; L: 50mm; Holder: hand; 4.9mm; Thread: fine thread; 2pcs.
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Conform to the norm: DIN 2181
Kind of thread: fine thread
Type of tool: tap
Kind of holder: hand
Length: 50mm
Holder socket size - mm: 4.9mm
Thread pitch: 0.5
Quantity in set/package: 2pcs.
Thread: M5
auf Bestellung 2 Stücke:
Lieferzeit 14-21 Tag (e)
2+35.75 EUR
Mindestbestellmenge: 2
Im Einkaufswagen  Stück im Wert von  UAH
26336 26336 VÖLKEL VOLKEL-26304.pdf Category: Threading Dies and Taps
Description: Tap; M10; 1; L: 63mm; Holder: hand; 5.5mm; Thread: fine thread; 2pcs.
Type of tool: tap
Thread: M10
Thread pitch: 1
Length: 63mm
Conform to the norm: DIN 2181
Kind of holder: hand
Holder socket size - mm: 5.5mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Quantity in set/package: 2pcs.
Kind of thread: fine thread
auf Bestellung 1 Stücke:
Lieferzeit 14-21 Tag (e)
1+71.5 EUR
Im Einkaufswagen  Stück im Wert von  UAH
27302 27302 VÖLKEL VOLKEL-EN.pdf VOLKEL-DE.pdf Category: Threading Dies and Taps
Description: Tap; M1; 0.25; L: 32mm; Holder: hand; 2.1mm; 3pcs.
Type of tool: tap
Thread: M1
Thread pitch: 0.25
Length: 32mm
Conform to the norm: DIN 352
Kind of holder: hand
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Quantity in set/package: 3pcs.
auf Bestellung 2 Stücke:
Lieferzeit 14-21 Tag (e)
2+35.75 EUR
Mindestbestellmenge: 2
Im Einkaufswagen  Stück im Wert von  UAH
27304 27304 VÖLKEL VOLKEL-EN.pdf VOLKEL-DE.pdf Category: Threading Dies and Taps
Description: Tap; M1,1; 0.25; L: 32mm; Holder: hand; 2.1mm; 3pcs.
Type of tool: tap
Thread: M1,1
Thread pitch: 0.25
Length: 32mm
Conform to the norm: DIN 352
Kind of holder: hand
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Quantity in set/package: 3pcs.
auf Bestellung 3 Stücke:
Lieferzeit 14-21 Tag (e)
3+23.84 EUR
Mindestbestellmenge: 3
Im Einkaufswagen  Stück im Wert von  UAH
27306 27306 VÖLKEL VOLKEL-EN.pdf VOLKEL-DE.pdf Category: Threading Dies and Taps
Description: Tap; M1,2; 0.25; L: 32mm; Holder: hand; 2.1mm; 3pcs.
Type of tool: tap
Thread: M1,2
Thread pitch: 0.25
Length: 32mm
Conform to the norm: DIN 352
Kind of holder: hand
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Quantity in set/package: 3pcs.
auf Bestellung 2 Stücke:
Lieferzeit 14-21 Tag (e)
2+35.75 EUR
Mindestbestellmenge: 2
Im Einkaufswagen  Stück im Wert von  UAH
27322 27322 VÖLKEL VOLKEL-EN.pdf VOLKEL-DE.pdf Category: Threading Dies and Taps
Description: Tap; M2,5; 0.45; L: 40mm; Holder: hand; 2.1mm; 3pcs.
Type of tool: tap
Thread: M2,5
Thread pitch: 0.45
Length: 40mm
Conform to the norm: DIN 352
Kind of holder: hand
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Quantity in set/package: 3pcs.
auf Bestellung 16 Stücke:
Lieferzeit 14-21 Tag (e)
5+14.8 EUR
10+13.16 EUR
Mindestbestellmenge: 5
Im Einkaufswagen  Stück im Wert von  UAH
27338 27338 VÖLKEL VOLKEL-EN.pdf VOLKEL-DE.pdf Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 50mm; Holder: hand; 4.9mm; 3pcs.
Type of tool: tap
Thread: M6
Thread pitch: 1
Length: 50mm
Conform to the norm: DIN 352
Kind of holder: hand
Holder socket size - mm: 4.9mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Quantity in set/package: 3pcs.
auf Bestellung 10 Stücke:
Lieferzeit 14-21 Tag (e)
8+9.67 EUR
9+8.49 EUR
10+7.62 EUR
Mindestbestellmenge: 8
Im Einkaufswagen  Stück im Wert von  UAH
27348 27348 VÖLKEL VOLKEL-EN.pdf VOLKEL-DE.pdf Category: Threading Dies and Taps
Description: Tap; M11; 1.5; L: 70mm; Holder: hand; 6.2mm; 3pcs.
Type of tool: tap
Thread: M11
Thread pitch: 1.5
Length: 70mm
Conform to the norm: DIN 352
Kind of holder: hand
Holder socket size - mm: 6.2mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Quantity in set/package: 3pcs.
auf Bestellung 1 Stücke:
Lieferzeit 14-21 Tag (e)
1+71.5 EUR
Im Einkaufswagen  Stück im Wert von  UAH
27402 27402 VÖLKEL VOLKEL-EN.pdf VOLKEL-DE.pdf Category: Threading Dies and Taps
Description: Threading die; M1; 0.25; Ø: 16mm; Thk: 5mm; high speed steel; 6g
Type of tool: threading die
Thread: M1
Thread pitch: 0.25
Conform to the norm: DIN 223
Material: high speed steel
Tolerance: 6g
Thickness: 5mm
Diameter: 16mm
auf Bestellung 1 Stücke:
Lieferzeit 14-21 Tag (e)
1+71.5 EUR
Im Einkaufswagen  Stück im Wert von  UAH
27404 27404 VÖLKEL VOLKEL-EN.pdf VOLKEL-DE.pdf Category: Threading Dies and Taps
Description: Threading die; M1,1; 0.25; Ø: 16mm; Thk: 5mm; high speed steel; 6g
Type of tool: threading die
Thread: M1,1
Thread pitch: 0.25
Diameter: 16mm
Thickness: 5mm
Conform to the norm: DIN 223
Material: high speed steel
Tolerance: 6g
auf Bestellung 3 Stücke:
Lieferzeit 14-21 Tag (e)
3+23.84 EUR
Mindestbestellmenge: 3
Im Einkaufswagen  Stück im Wert von  UAH
27406 27406 VÖLKEL VOLKEL-EN.pdf VOLKEL-DE.pdf Category: Threading Dies and Taps
Description: Threading die; M1,2; 0.25; Ø: 16mm; Thk: 5mm; high speed steel; 6g
Type of tool: threading die
Thread: M1,2
Thread pitch: 0.25
Conform to the norm: DIN 223
Material: high speed steel
Tolerance: 6g
Thickness: 5mm
Diameter: 16mm
auf Bestellung 2 Stücke:
Lieferzeit 14-21 Tag (e)
2+35.75 EUR
Mindestbestellmenge: 2
Im Einkaufswagen  Stück im Wert von  UAH
27408 27408 VÖLKEL VOLKEL-EN.pdf VOLKEL-DE.pdf Category: Threading Dies and Taps
Description: Threading die; M1,4; 0.3; Ø: 16mm; Thk: 5mm; high speed steel; 6g
Conform to the norm: DIN 223
Thread: M1,4
Type of tool: threading die
Thickness: 5mm
Diameter: 16mm
Thread pitch: 0.3
Tolerance: 6g
Material: high speed steel
auf Bestellung 3 Stücke:
Lieferzeit 14-21 Tag (e)
3+23.84 EUR
Mindestbestellmenge: 3
Im Einkaufswagen  Stück im Wert von  UAH
27422 27422 VÖLKEL VOLKEL-EN.pdf VOLKEL-DE.pdf Category: Threading Dies and Taps
Description: Threading die; M2,5; 0.45; Ø: 16mm; Thk: 5mm; high speed steel; 6g
Type of tool: threading die
Thread: M2,5
Thread pitch: 0.45
Conform to the norm: DIN 223
Material: high speed steel
Tolerance: 6g
Thickness: 5mm
Diameter: 16mm
auf Bestellung 6 Stücke:
Lieferzeit 14-21 Tag (e)
6+11.91 EUR
Mindestbestellmenge: 6
Im Einkaufswagen  Stück im Wert von  UAH
27424 27424 VÖLKEL VOLKEL-EN.pdf VOLKEL-DE.pdf Category: Threading Dies and Taps
Description: Threading die; M2,6; 0.45; Ø: 16mm; Thk: 5mm; high speed steel; 6g
Type of tool: threading die
Thread: M2,6
Thread pitch: 0.45
Diameter: 16mm
Thickness: 5mm
Conform to the norm: DIN 223
Material: high speed steel
Tolerance: 6g
auf Bestellung 1 Stücke:
Lieferzeit 14-21 Tag (e)
1+71.5 EUR
Im Einkaufswagen  Stück im Wert von  UAH
27426 27426 VÖLKEL VOLKEL-EN.pdf VOLKEL-DE.pdf Category: Threading Dies and Taps
Description: Threading die; M3; 0.5; Ø: 20mm; Thk: 5mm; high speed steel; 6g
Type of tool: threading die
Thread: M3
Thread pitch: 0.5
Diameter: 20mm
Thickness: 5mm
Conform to the norm: DIN 223
Material: high speed steel
Tolerance: 6g
auf Bestellung 5 Stücke:
Lieferzeit 14-21 Tag (e)
5+14.3 EUR
Mindestbestellmenge: 5
Im Einkaufswagen  Stück im Wert von  UAH
27446 27446 VÖLKEL VOLKEL-EN.pdf VOLKEL-DE.pdf Category: Threading Dies and Taps
Description: Threading die; M10; 1.5; Ø: 30mm; Thk: 11mm; high speed steel; 6g
Conform to the norm: DIN 223
Material: high speed steel
Type of tool: threading die
Thickness: 11mm
Diameter: 30mm
Thread pitch: 1.5
Thread: M10
Tolerance: 6g
auf Bestellung 4 Stücke:
Lieferzeit 14-21 Tag (e)
4+17.88 EUR
Mindestbestellmenge: 4
Im Einkaufswagen  Stück im Wert von  UAH
35238 35238 VÖLKEL VOLKEL-EN.pdf VOLKEL-DE.pdf Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: machine; 4.9mm; ISO2/6H
Type of tool: tap
Thread: M6
Thread pitch: 1
Length: 80mm
Conform to the norm: DIN 371
Kind of holder: machine
Holder socket size - mm: 4.9mm
Material: high speed steel cobalt HSS-E
Tolerance: ISO2/6H
Tools application: chrome-nickel alloy; to the through holes
auf Bestellung 15 Stücke:
Lieferzeit 14-21 Tag (e)
6+13.48 EUR
7+11.85 EUR
10+10.6 EUR
Mindestbestellmenge: 6
Im Einkaufswagen  Stück im Wert von  UAH
35250 35250 VÖLKEL VOLKEL-EN.pdf VOLKEL-DE.pdf Category: Threading Dies and Taps
Description: Tap; M12; 1.75; L: 110mm; Holder: machine; 7mm; ISO2/6H
Tools application: chrome-nickel alloy; to the through holes
Conform to the norm: DIN 376
Type of tool: tap
Tolerance: ISO2/6H
Kind of holder: machine
Holder socket size - mm: 7mm
Length: 0.11m
Thread pitch: 1.75
Thread: M12
Material: high speed steel cobalt HSS-E
auf Bestellung 1 Stücke:
Lieferzeit 14-21 Tag (e)
1+71.5 EUR
Im Einkaufswagen  Stück im Wert von  UAH
35430 35430 VÖLKEL VOLKEL-EN.pdf VOLKEL-DE.pdf Category: Threading Dies and Taps
Description: Tap; M4; 0.7; L: 63mm; Holder: machine; 3.4mm; ISO2/6H
Type of tool: tap
Thread: M4
Thread pitch: 0.7
Length: 63mm
Conform to the norm: DIN 371
Kind of holder: machine
Holder socket size - mm: 3.4mm
Material: high speed steel cobalt HSS-E
Tolerance: ISO2/6H
Tools application: stainless steel; to the through holes
auf Bestellung 16 Stücke:
Lieferzeit 14-21 Tag (e)
7+11.34 EUR
8+9.97 EUR
10+8.92 EUR
Mindestbestellmenge: 7
Im Einkaufswagen  Stück im Wert von  UAH
35438 35438 VÖLKEL VOLKEL-EN.pdf VOLKEL-DE.pdf Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: machine; 4.9mm; ISO2/6H
Type of tool: tap
Thread: M6
Thread pitch: 1
Length: 80mm
Conform to the norm: DIN 371
Kind of holder: machine
Holder socket size - mm: 4.9mm
Material: high speed steel cobalt HSS-E
Tolerance: ISO2/6H
Tools application: stainless steel; to the through holes
auf Bestellung 5 Stücke:
Lieferzeit 14-21 Tag (e)
5+14.3 EUR
Mindestbestellmenge: 5
Im Einkaufswagen  Stück im Wert von  UAH
36291 36291 VÖLKEL VOLKEL-EN.pdf VOLKEL-DE.pdf Category: Threading Dies and Taps
Description: Tap; M4; 0.7; Holder: machine; high speed steel cobalt HSS-E
Type of tool: tap
Thread: M4
Thread pitch: 0.7
Conform to the norm: DIN 371
Kind of holder: machine
Material: high speed steel cobalt HSS-E
Tolerance: ISO2/6H
Tools application: chrome-nickel alloy; for blind holes
Kit contents: drill; tap
Quantity in set/package: 2pcs.
Version: C/39°RSP
auf Bestellung 6 Stücke:
Lieferzeit 14-21 Tag (e)
5+15.33 EUR
Mindestbestellmenge: 5
Im Einkaufswagen  Stück im Wert von  UAH
36446 36446 VÖLKEL VOLKEL-EN.pdf VOLKEL-DE.pdf Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: machine; 8mm; ISO2/6H; C/39°RSP
Type of tool: tap
Version: C/39°RSP
Conform to the norm: DIN 371
Kind of holder: machine
Tools application: for blind holes; stainless steel
Material: high speed steel cobalt HSS-E
Tolerance: ISO2/6H
Length: 0.1m
Holder socket size - mm: 8mm
Thread pitch: 1.5
Thread: M10
auf Bestellung 2 Stücke:
Lieferzeit 14-21 Tag (e)
2+35.75 EUR
Mindestbestellmenge: 2
Im Einkaufswagen  Stück im Wert von  UAH
37342 VÖLKEL VOLKEL-EN.pdf VOLKEL-DE.pdf Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: machine; 6.2mm; ISO2/6H
Material: high speed steel cobalt HSS-E
Tolerance: ISO2/6H
Thread: M8
Kind of holder: machine
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 6.2mm
Length: 90mm
Thread pitch: 1.25
Conform to the norm: DIN 371
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
37502 37502 VÖLKEL VOLKEL-EN.pdf VOLKEL-DE.pdf Category: Threading Dies and Taps
Description: Tap; M1; 0.25; L: 40mm; Holder: machine; 2.1mm; ISO2/6H
Type of tool: tap
Thread: M1
Thread pitch: 0.25
Length: 40mm
Conform to the norm: DIN 371
Kind of holder: machine
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tolerance: ISO2/6H
Tools application: to the through holes
auf Bestellung 5 Stücke:
Lieferzeit 14-21 Tag (e)
3+26.27 EUR
5+23.09 EUR
Mindestbestellmenge: 3
Im Einkaufswagen  Stück im Wert von  UAH
37506 37506 VÖLKEL VOLKEL-EN.pdf VOLKEL-DE.pdf Category: Threading Dies and Taps
Description: Tap; M1,2; 0.25; L: 40mm; Holder: machine; 2.1mm; ISO2/6H
Type of tool: tap
Thread: M1,2
Thread pitch: 0.25
Length: 40mm
Conform to the norm: DIN 371
Kind of holder: machine
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tolerance: ISO2/6H
Tools application: to the through holes
auf Bestellung 3 Stücke:
Lieferzeit 14-21 Tag (e)
3+26.27 EUR
Mindestbestellmenge: 3
Im Einkaufswagen  Stück im Wert von  UAH
37538 37538 VÖLKEL VOLKEL-EN.pdf VOLKEL-DE.pdf Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: machine; 4.9mm; ISO2/6H
Type of tool: tap
Thread: M6
Thread pitch: 1
Length: 80mm
Conform to the norm: DIN 371
Kind of holder: machine
Holder socket size - mm: 4.9mm
Material: high speed steel cobalt HSS-E
Tolerance: ISO2/6H
Tools application: to the through holes
auf Bestellung 5 Stücke:
Lieferzeit 14-21 Tag (e)
5+14.3 EUR
Mindestbestellmenge: 5
Im Einkaufswagen  Stück im Wert von  UAH
37722 37722 VÖLKEL VOLKEL-EN.pdf VOLKEL-DE.pdf Category: Threading Dies and Taps
Description: Tap; M2,5; 0.45; L: 50mm; Holder: machine; 2.1mm; ISO2/6H; C/35°RSP
Type of tool: tap
Thread: M2,5
Thread pitch: 0.45
Length: 50mm
Conform to the norm: DIN 371
Kind of holder: machine
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tolerance: ISO2/6H
Tools application: for blind holes
Version: C/35°RSP
auf Bestellung 21 Stücke:
Lieferzeit 14-21 Tag (e)
5+15.23 EUR
10+13.6 EUR
Mindestbestellmenge: 5
Im Einkaufswagen  Stück im Wert von  UAH
38550 38550 VÖLKEL VOLKEL-EN.pdf VOLKEL-DE.pdf Category: Threading Dies and Taps
Description: Tap; M12; 1.75; L: 110mm; Holder: machine; 7mm; ISO2/6H
Type of tool: tap
Thread: M12
Thread pitch: 1.75
Length: 0.11m
Conform to the norm: DIN 376
Kind of holder: machine
Holder socket size - mm: 7mm
Material: high speed steel cobalt HSS-E
Tolerance: ISO2/6H
Tools application: to the through holes
auf Bestellung 3 Stücke:
Lieferzeit 14-21 Tag (e)
3+23.84 EUR
Mindestbestellmenge: 3
Im Einkaufswagen  Stück im Wert von  UAH
47001
+1
 		47001 VÖLKEL VOLKEL-EN.pdf VOLKEL-DE.pdf description Category: Threading Dies and Taps
Description: Tools set: taps; plastic box; Holder: hand; Kit: taps,tap wrench
Kind of package: plastic box
Conform to the norm: DIN 352
Type of tools set: taps
Kind of holder: hand
Thread: M3; M4; M5; M6; M8; M10; M12
Quantity in set/package: 22pcs.
Kit contents: taps; tap wrench
auf Bestellung 1 Stücke:
Lieferzeit 14-21 Tag (e)
1+99.1 EUR
Im Einkaufswagen  Stück im Wert von  UAH
47005
+1
 		47005 VÖLKEL VOLKEL-EN.pdf VOLKEL-DE.pdf Category: Threading Dies and Taps
Description: Tools set: taps; plastic box; Holder: hand; 23pcs.
Kind of package: plastic box
Conform to the norm: DIN 352
Type of tools set: taps
Kind of holder: hand
Thread: M3; M4; M5; M6; M8; M10; M12
Quantity in set/package: 23pcs.
Kit contents: ratchet handle; taps; tap wrench
auf Bestellung 2 Stücke:
Lieferzeit 14-21 Tag (e)
1+111.03 EUR
Im Einkaufswagen  Stück im Wert von  UAH
47815
+1
 		47815 VÖLKEL VOLKEL-EN.pdf VOLKEL-DE.pdf Category: Threading Dies and Taps
Description: Tools set: taps; plastic box; Holder: machine; 7pcs.
Type of tools set: taps
Kind of package: plastic box
Conform to the norm: DIN 371; DIN 376
Kind of holder: machine
Thread: M3; M4; M5; M6; M8; M10; M12
Quantity in set/package: 7pcs.
auf Bestellung 2 Stücke:
Lieferzeit 14-21 Tag (e)
1+89.55 EUR
Im Einkaufswagen  Stück im Wert von  UAH
63322 63322 VÖLKEL VOLKEL-63314.pdf Category: Threading Dies and Taps
Description: Tap; UNC 1/2-13; L: 75mm; Holder: machine; 7mm; Thread: inch,UNC
Type of tool: tap
Thread: UNC 1/2-13
Length: 75mm
Conform to the norm: DIN 352
Kind of holder: machine
Holder socket size - mm: 7mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; UNC
Tools application: to the through holes
auf Bestellung 3 Stücke:
Lieferzeit 14-21 Tag (e)
3+23.84 EUR
Mindestbestellmenge: 3
Im Einkaufswagen  Stück im Wert von  UAH
63326 63326 VÖLKEL VOLKEL-63314.pdf Category: Threading Dies and Taps
Description: Tap; UNC 5/8-11; L: 80mm; Holder: machine; 9mm; Thread: inch,UNC
Type of tool: tap
Thread: UNC 5/8-11
Length: 80mm
Conform to the norm: DIN 352
Kind of holder: machine
Holder socket size - mm: 9mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; UNC
Tools application: to the through holes
auf Bestellung 3 Stücke:
Lieferzeit 14-21 Tag (e)
3+23.84 EUR
Mindestbestellmenge: 3
Im Einkaufswagen  Stück im Wert von  UAH
63512 63512 VÖLKEL VOLKEL-63510.pdf Category: Threading Dies and Taps
Description: Tap; NPT 1/8"; L: 65mm; Holder: machine; 5.5mm; Thread: inch,NPT
Type of tool: tap
Kind of holder: machine
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Application: for cable glands
Kind of thread: inch; NPT
Thread: NPT 1/8"
Holder socket size - mm: 5.5mm
Length: 65mm
auf Bestellung 2 Stücke:
Lieferzeit 14-21 Tag (e)
2+35.75 EUR
Mindestbestellmenge: 2
Im Einkaufswagen  Stück im Wert von  UAH
65711 65711 VÖLKEL VOLKEL-65707.pdf Category: Threading Dies and Taps
Description: Tap; PG11; L: 80mm; Holder: machine; 11mm; to the through holes
Type of tool: tap
Thread: PG11
Length: 80mm
Conform to the norm: DIN 40432
Kind of holder: machine
Holder socket size - mm: 11mm
Material: high speed steel grounded HSS-G
Tools application: to the through holes
Application: for cable glands
auf Bestellung 5 Stücke:
Lieferzeit 14-21 Tag (e)
3+29.47 EUR
5+25.91 EUR
Mindestbestellmenge: 3
Im Einkaufswagen  Stück im Wert von  UAH
65716 65716 VÖLKEL VOLKEL-65707.pdf Category: Threading Dies and Taps
Description: Tap; PG16; L: 80mm; Holder: machine; 14.5mm; to the through holes
Tools application: to the through holes
Application: for cable glands
Kind of holder: machine
Material: high speed steel grounded HSS-G
Conform to the norm: DIN 40432
Thread: PG16
Type of tool: tap
Holder socket size - mm: 14.5mm
Length: 80mm
auf Bestellung 2 Stücke:
Lieferzeit 14-21 Tag (e)
2+42.29 EUR
Mindestbestellmenge: 2
Im Einkaufswagen  Stück im Wert von  UAH
66326 66326 VÖLKEL VOLKEL-66318.pdf Category: Threading Dies and Taps
Description: Tap; M8; 1; L: 56mm; Holder: machine; 4.9mm; Thread: fine thread
Type of tool: tap
Thread: M8
Thread pitch: 1
Length: 56mm
Conform to the norm: DIN 2181
Kind of holder: machine
Holder socket size - mm: 4.9mm
Material: high speed steel grounded HSS-G
Tools application: to the through holes
Kind of thread: fine thread
auf Bestellung 10 Stücke:
Lieferzeit 14-21 Tag (e)
10+7.15 EUR
Mindestbestellmenge: 10
Im Einkaufswagen  Stück im Wert von  UAH
66336 66336 VÖLKEL VOLKEL-66318.pdf Category: Threading Dies and Taps
Description: Tap; M10; 1; L: 63mm; Holder: machine; 5.5mm; Thread: fine thread
Type of tool: tap
Thread: M10
Thread pitch: 1
Length: 63mm
Conform to the norm: DIN 2181
Kind of holder: machine
Holder socket size - mm: 5.5mm
Material: high speed steel grounded HSS-G
Tools application: to the through holes
Kind of thread: fine thread
auf Bestellung 4 Stücke:
Lieferzeit 14-21 Tag (e)
4+17.88 EUR
Mindestbestellmenge: 4
Im Einkaufswagen  Stück im Wert von  UAH
66344 66344 VÖLKEL VOLKEL-66318.pdf Category: Threading Dies and Taps
Description: Tap; M12; 1; L: 70mm; Holder: machine; 7mm; Thread: fine thread
Type of tool: tap
Thread: M12
Thread pitch: 1
Length: 70mm
Conform to the norm: DIN 2181
Kind of holder: machine
Holder socket size - mm: 7mm
Material: high speed steel grounded HSS-G
Tools application: to the through holes
Kind of thread: fine thread
auf Bestellung 3 Stücke:
Lieferzeit 14-21 Tag (e)
3+23.84 EUR
Mindestbestellmenge: 3
Im Einkaufswagen  Stück im Wert von  UAH
66370 66370 VÖLKEL VOLKEL-66318.pdf Category: Threading Dies and Taps
Description: Tap; M18; 1; L: 80mm; Holder: machine; 11mm; Thread: fine thread
Type of tool: tap
Thread: M18
Thread pitch: 1
Length: 80mm
Conform to the norm: DIN 2181
Kind of holder: machine
Holder socket size - mm: 11mm
Material: high speed steel grounded HSS-G
Tools application: to the through holes
Kind of thread: fine thread
auf Bestellung 2 Stücke:
Lieferzeit 14-21 Tag (e)
2+35.75 EUR
Mindestbestellmenge: 2
Im Einkaufswagen  Stück im Wert von  UAH
67010
+1
 		67010 VÖLKEL VOLKEL-EN.pdf VOLKEL-DE.pdf Category: Threading Dies and Taps
Description: Tools set: taps; plastic box; 6.3mm; 1/4"; ISO2/6H; 6pcs.
Material: high speed steel grounded HSS-G
Kind of package: plastic box
Type of tools set: taps
Tolerance: ISO2/6H
Holder socket size - mm: 6.3mm
Quantity in set/package: 6pcs.
Holder socket size - inch: 1/4"
auf Bestellung 3 Stücke:
Lieferzeit 14-21 Tag (e)
2+36.78 EUR
Mindestbestellmenge: 2
Im Einkaufswagen  Stück im Wert von  UAH
67020
+1
 		67020 VÖLKEL VOLKEL-EN.pdf VOLKEL-DE.pdf Category: Threading Dies and Taps
Description: Tools set: taps; plastic box; Kit: 1/4" adapter,taps,drill bits
Material: high speed steel grounded HSS-G
Kind of package: plastic box
Type of tools set: taps
Tolerance: ISO2/6H
Holder socket size - mm: 6.3mm
Quantity in set/package: 13pcs.
Holder socket size - inch: 1/4"
Kit contents: 1/4" adapter; drill bits; taps
auf Bestellung 2 Stücke:
Lieferzeit 14-21 Tag (e)
2+60.42 EUR
Mindestbestellmenge: 2
Im Einkaufswagen  Stück im Wert von  UAH
80538 80538 VÖLKEL VOLKEL-EN.pdf VOLKEL-DE.pdf Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 66mm; Holder: machine; 5mm; ISO2/6H
Type of tool: tap
Thread: M6
Thread pitch: 1
Length: 66mm
Conform to the norm: ISO 529
Kind of holder: machine
Holder socket size - mm: 5mm
Material: high speed steel grounded HSS-G
Tolerance: ISO2/6H
Tools application: to the through holes
auf Bestellung 17 Stücke:
Lieferzeit 14-21 Tag (e)
14+5.39 EUR
16+4.73 EUR
17+4.2 EUR
Mindestbestellmenge: 14
Im Einkaufswagen  Stück im Wert von  UAH
90538 90538 VÖLKEL VOLKEL-EN.pdf VOLKEL-DE.pdf Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 62mm; Holder: machine; 4.5mm; ISO2/6H
Type of tool: tap
Thread: M6
Thread pitch: 1
Length: 62mm
Conform to the norm: JIS B-4430
Kind of holder: machine
Holder socket size - mm: 4.5mm
Material: high speed steel cobalt HSS-E
Tolerance: ISO2/6H
Tools application: to the through holes
auf Bestellung 24 Stücke:
Lieferzeit 14-21 Tag (e)
16+4.5 EUR
18+3.99 EUR
21+3.55 EUR
Mindestbestellmenge: 16
Im Einkaufswagen  Stück im Wert von  UAH
90726 90726 VÖLKEL VOLKEL-EN.pdf VOLKEL-DE.pdf Category: Threading Dies and Taps
Description: Tap; M4; 0.7; L: 52mm; Holder: machine; 4mm; ISO2/6H; for blind holes
Type of tool: tap
Thread: M4
Thread pitch: 0.7
Length: 52mm
Conform to the norm: JIS B-4430
Kind of holder: machine
Holder socket size - mm: 4mm
Material: high speed steel cobalt HSS-E
Tolerance: ISO2/6H
Tools application: for blind holes
Version: C/35°RSP
auf Bestellung 27 Stücke:
Lieferzeit 14-21 Tag (e)
18+4.15 EUR
20+3.63 EUR
22+3.26 EUR
Mindestbestellmenge: 18
Im Einkaufswagen  Stück im Wert von  UAH
90738 90738 VÖLKEL VOLKEL-EN.pdf VOLKEL-DE.pdf Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 62mm; Holder: machine; 4.5mm; ISO2/6H; for blind holes
Type of tool: tap
Thread: M6
Thread pitch: 1
Length: 62mm
Conform to the norm: JIS B-4430
Kind of holder: machine
Holder socket size - mm: 4.5mm
Material: high speed steel cobalt HSS-E
Tolerance: ISO2/6H
Tools application: for blind holes
Version: C/35°RSP
auf Bestellung 13 Stücke:
Lieferzeit 14-21 Tag (e)
13+5.51 EUR
Mindestbestellmenge: 13
Im Einkaufswagen  Stück im Wert von  UAH
04028 VCOIL_04001_EN.pdf
04028
Hersteller: VÖLKEL
Category: General Purpose Tools - Others
Description: Tools set: for thread repair; Holder: hand; Thread: M14; Pitch: 2
Type of tools set: for thread repair
Kind of holder: hand
Thread: M14
Thread pitch: 2
Kind of thread: metric
auf Bestellung 2 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
2+51.65 EUR
Mindestbestellmenge: 2
Im Einkaufswagen  Stück im Wert von  UAH
04090 VCOIL_04090_EN.pdf
Hersteller: VÖLKEL
Category: General Purpose Tools - Others
Description: Tools set: for thread repair
Type of tools set: for thread repair
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
04091 VCOIL_04090_EN.pdf
Hersteller: VÖLKEL
Category: General Purpose Tools - Others
Description: Tools set: for thread repair
Type of tools set: for thread repair
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
04092 VCOIL_04090_EN.pdf
Hersteller: VÖLKEL
Category: General Purpose Tools - Others
Description: Tools set: for thread repair
Type of tools set: for thread repair
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
04093 VCOIL_04090_EN.pdf
Hersteller: VÖLKEL
Category: General Purpose Tools - Others
Description: Tools set: for thread repair
Type of tools set: for thread repair
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
04094 VCOIL_04090_EN.pdf
Hersteller: VÖLKEL
Category: General Purpose Tools - Others
Description: Tools set: for thread repair
Type of tools set: for thread repair
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
04095 VCOIL_04090_EN.pdf
Hersteller: VÖLKEL
Category: General Purpose Tools - Others
Description: Tools set: for thread repair
Type of tools set: for thread repair
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
04096 VCOIL_04090_EN.pdf
Hersteller: VÖLKEL
Category: General Purpose Tools - Others
Description: Tools set: for thread repair
Type of tools set: for thread repair
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
04097 VCOIL_04090_EN.pdf
Hersteller: VÖLKEL
Category: General Purpose Tools - Others
Description: Tools set: for thread repair
Type of tools set: for thread repair
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
04102 VCOIL_04100_EN.pdf
04102
Hersteller: VÖLKEL
Category: General Purpose Tools - Others
Description: Tools set: for thread repair; Holder: hand; Thread: UNC 6-32
Type of tools set: for thread repair
Kind of holder: hand
Thread: UNC 6-32
Kind of thread: inch; UNC
auf Bestellung 2 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
2+35.75 EUR
Mindestbestellmenge: 2
Im Einkaufswagen  Stück im Wert von  UAH
25707 VOLKEL-25707.pdf
25707
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; PG7; L: 70mm; Holder: hand; 7mm; Thread: PG; 2pcs.
Type of tool: tap
Thread: PG7
Length: 70mm
Conform to the norm: DIN 40432
Kind of holder: hand
Holder socket size - mm: 7mm
Material: high speed steel grounded HSS-G
Kind of thread: PG
Tools application: for blind holes; to the through holes
Quantity in set/package: 2pcs.
Application: for cable glands
auf Bestellung 1 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
1+71.5 EUR
Im Einkaufswagen  Stück im Wert von  UAH
25711 VOLKEL-25707.pdf
25711
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; PG11; L: 80mm; Holder: hand; 11mm; Thread: PG; 2pcs.
Type of tool: tap
Thread: PG11
Length: 80mm
Conform to the norm: DIN 40432
Kind of holder: hand
Holder socket size - mm: 11mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Application: for cable glands
Kind of thread: PG
Quantity in set/package: 2pcs.
auf Bestellung 1 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
1+71.5 EUR
Im Einkaufswagen  Stück im Wert von  UAH
25716 VOLKEL-25707.pdf
25716
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; PG16; L: 80mm; Holder: hand; 14.5mm; Thread: PG; 2pcs.
Kind of thread: PG
Tools application: for blind holes; to the through holes
Application: for cable glands
Kind of holder: hand
Material: high speed steel grounded HSS-G
Conform to the norm: DIN 40432
Thread: PG16
Type of tool: tap
Holder socket size - mm: 14.5mm
Length: 80mm
Quantity in set/package: 2pcs.
auf Bestellung 1 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
1+84.54 EUR
Im Einkaufswagen  Stück im Wert von  UAH
26304 VOLKEL-26304.pdf
26304
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; M2,5; 0.35; L: 40mm; Holder: hand; 2.1mm; Thread: fine thread
Type of tool: tap
Thread: M2,5
Thread pitch: 0.35
Length: 40mm
Conform to the norm: DIN 2181
Kind of holder: hand
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Quantity in set/package: 2pcs.
Kind of thread: fine thread
auf Bestellung 3 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
3+23.84 EUR
Mindestbestellmenge: 3
Im Einkaufswagen  Stück im Wert von  UAH
26314 VOLKEL-26304.pdf
26314
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; M5; 0.5; L: 50mm; Holder: hand; 4.9mm; Thread: fine thread; 2pcs.
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Conform to the norm: DIN 2181
Kind of thread: fine thread
Type of tool: tap
Kind of holder: hand
Length: 50mm
Holder socket size - mm: 4.9mm
Thread pitch: 0.5
Quantity in set/package: 2pcs.
Thread: M5
auf Bestellung 2 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
2+35.75 EUR
Mindestbestellmenge: 2
Im Einkaufswagen  Stück im Wert von  UAH
26336 VOLKEL-26304.pdf
26336
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; M10; 1; L: 63mm; Holder: hand; 5.5mm; Thread: fine thread; 2pcs.
Type of tool: tap
Thread: M10
Thread pitch: 1
Length: 63mm
Conform to the norm: DIN 2181
Kind of holder: hand
Holder socket size - mm: 5.5mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Quantity in set/package: 2pcs.
Kind of thread: fine thread
auf Bestellung 1 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
1+71.5 EUR
Im Einkaufswagen  Stück im Wert von  UAH
27302 VOLKEL-EN.pdf VOLKEL-DE.pdf
27302
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; M1; 0.25; L: 32mm; Holder: hand; 2.1mm; 3pcs.
Type of tool: tap
Thread: M1
Thread pitch: 0.25
Length: 32mm
Conform to the norm: DIN 352
Kind of holder: hand
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Quantity in set/package: 3pcs.
auf Bestellung 2 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
2+35.75 EUR
Mindestbestellmenge: 2
Im Einkaufswagen  Stück im Wert von  UAH
27304 VOLKEL-EN.pdf VOLKEL-DE.pdf
27304
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; M1,1; 0.25; L: 32mm; Holder: hand; 2.1mm; 3pcs.
Type of tool: tap
Thread: M1,1
Thread pitch: 0.25
Length: 32mm
Conform to the norm: DIN 352
Kind of holder: hand
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Quantity in set/package: 3pcs.
auf Bestellung 3 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
3+23.84 EUR
Mindestbestellmenge: 3
Im Einkaufswagen  Stück im Wert von  UAH
27306 VOLKEL-EN.pdf VOLKEL-DE.pdf
27306
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; M1,2; 0.25; L: 32mm; Holder: hand; 2.1mm; 3pcs.
Type of tool: tap
Thread: M1,2
Thread pitch: 0.25
Length: 32mm
Conform to the norm: DIN 352
Kind of holder: hand
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Quantity in set/package: 3pcs.
auf Bestellung 2 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
2+35.75 EUR
Mindestbestellmenge: 2
Im Einkaufswagen  Stück im Wert von  UAH
27322 VOLKEL-EN.pdf VOLKEL-DE.pdf
27322
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; M2,5; 0.45; L: 40mm; Holder: hand; 2.1mm; 3pcs.
Type of tool: tap
Thread: M2,5
Thread pitch: 0.45
Length: 40mm
Conform to the norm: DIN 352
Kind of holder: hand
Holder socket size - mm: 2.1mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Quantity in set/package: 3pcs.
auf Bestellung 16 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
5+14.8 EUR
10+13.16 EUR
Mindestbestellmenge: 5
Im Einkaufswagen  Stück im Wert von  UAH
27338 VOLKEL-EN.pdf VOLKEL-DE.pdf
27338
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 50mm; Holder: hand; 4.9mm; 3pcs.
Type of tool: tap
Thread: M6
Thread pitch: 1
Length: 50mm
Conform to the norm: DIN 352
Kind of holder: hand
Holder socket size - mm: 4.9mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Quantity in set/package: 3pcs.
auf Bestellung 10 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
8+9.67 EUR
9+8.49 EUR
10+7.62 EUR
Mindestbestellmenge: 8
Im Einkaufswagen  Stück im Wert von  UAH
27348 VOLKEL-EN.pdf VOLKEL-DE.pdf
27348
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; M11; 1.5; L: 70mm; Holder: hand; 6.2mm; 3pcs.
Type of tool: tap
Thread: M11
Thread pitch: 1.5
Length: 70mm
Conform to the norm: DIN 352
Kind of holder: hand
Holder socket size - mm: 6.2mm
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Quantity in set/package: 3pcs.
auf Bestellung 1 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
1+71.5 EUR
Im Einkaufswagen  Stück im Wert von  UAH
27402 VOLKEL-EN.pdf VOLKEL-DE.pdf
27402
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Threading die; M1; 0.25; Ø: 16mm; Thk: 5mm; high speed steel; 6g
Type of tool: threading die
Thread: M1
Thread pitch: 0.25
Conform to the norm: DIN 223
Material: high speed steel
Tolerance: 6g
Thickness: 5mm
Diameter: 16mm
auf Bestellung 1 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
1+71.5 EUR
Im Einkaufswagen  Stück im Wert von  UAH
27404 VOLKEL-EN.pdf VOLKEL-DE.pdf
27404
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Threading die; M1,1; 0.25; Ø: 16mm; Thk: 5mm; high speed steel; 6g
Type of tool: threading die
Thread: M1,1
Thread pitch: 0.25
Diameter: 16mm
Thickness: 5mm
Conform to the norm: DIN 223
Material: high speed steel
Tolerance: 6g
auf Bestellung 3 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
3+23.84 EUR
Mindestbestellmenge: 3
Im Einkaufswagen  Stück im Wert von  UAH
27406 VOLKEL-EN.pdf VOLKEL-DE.pdf
27406
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Threading die; M1,2; 0.25; Ø: 16mm; Thk: 5mm; high speed steel; 6g
Type of tool: threading die
Thread: M1,2
Thread pitch: 0.25
Conform to the norm: DIN 223
Material: high speed steel
Tolerance: 6g
Thickness: 5mm
Diameter: 16mm
auf Bestellung 2 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
2+35.75 EUR
Mindestbestellmenge: 2
Im Einkaufswagen  Stück im Wert von  UAH
27408 VOLKEL-EN.pdf VOLKEL-DE.pdf
27408
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Threading die; M1,4; 0.3; Ø: 16mm; Thk: 5mm; high speed steel; 6g
Conform to the norm: DIN 223
Thread: M1,4
Type of tool: threading die
Thickness: 5mm
Diameter: 16mm
Thread pitch: 0.3
Tolerance: 6g
Material: high speed steel
auf Bestellung 3 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
3+23.84 EUR
Mindestbestellmenge: 3
Im Einkaufswagen  Stück im Wert von  UAH
27422 VOLKEL-EN.pdf VOLKEL-DE.pdf
27422
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Threading die; M2,5; 0.45; Ø: 16mm; Thk: 5mm; high speed steel; 6g
Type of tool: threading die
Thread: M2,5
Thread pitch: 0.45
Conform to the norm: DIN 223
Material: high speed steel
Tolerance: 6g
Thickness: 5mm
Diameter: 16mm
auf Bestellung 6 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
6+11.91 EUR
Mindestbestellmenge: 6
Im Einkaufswagen  Stück im Wert von  UAH
27424 VOLKEL-EN.pdf VOLKEL-DE.pdf
27424
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Threading die; M2,6; 0.45; Ø: 16mm; Thk: 5mm; high speed steel; 6g
Type of tool: threading die
Thread: M2,6
Thread pitch: 0.45
Diameter: 16mm
Thickness: 5mm
Conform to the norm: DIN 223
Material: high speed steel
Tolerance: 6g
auf Bestellung 1 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
1+71.5 EUR
Im Einkaufswagen  Stück im Wert von  UAH
27426 VOLKEL-EN.pdf VOLKEL-DE.pdf
27426
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Threading die; M3; 0.5; Ø: 20mm; Thk: 5mm; high speed steel; 6g
Type of tool: threading die
Thread: M3
Thread pitch: 0.5
Diameter: 20mm
Thickness: 5mm
Conform to the norm: DIN 223
Material: high speed steel
Tolerance: 6g
auf Bestellung 5 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
5+14.3 EUR
Mindestbestellmenge: 5
Im Einkaufswagen  Stück im Wert von  UAH
27446 VOLKEL-EN.pdf VOLKEL-DE.pdf
27446
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Threading die; M10; 1.5; Ø: 30mm; Thk: 11mm; high speed steel; 6g
Conform to the norm: DIN 223
Material: high speed steel
Type of tool: threading die
Thickness: 11mm
Diameter: 30mm
Thread pitch: 1.5
Thread: M10
Tolerance: 6g
auf Bestellung 4 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
4+17.88 EUR
Mindestbestellmenge: 4
Im Einkaufswagen  Stück im Wert von  UAH
35238 VOLKEL-EN.pdf VOLKEL-DE.pdf
35238
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: machine; 4.9mm; ISO2/6H
Type of tool: tap
Thread: M6
Thread pitch: 1
Length: 80mm
Conform to the norm: DIN 371
Kind of holder: machine
Holder socket size - mm: 4.9mm
Material: high speed steel cobalt HSS-E
Tolerance: ISO2/6H
Tools application: chrome-nickel alloy; to the through holes
auf Bestellung 15 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
6+13.48 EUR
7+11.85 EUR
10+10.6 EUR
Mindestbestellmenge: 6
Im Einkaufswagen  Stück im Wert von  UAH
35250 VOLKEL-EN.pdf VOLKEL-DE.pdf
35250
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; M12; 1.75; L: 110mm; Holder: machine; 7mm; ISO2/6H
Tools application: chrome-nickel alloy; to the through holes
Conform to the norm: DIN 376
Type of tool: tap
Tolerance: ISO2/6H
Kind of holder: machine
Holder socket size - mm: 7mm
Length: 0.11m
Thread pitch: 1.75
Thread: M12
Material: high speed steel cobalt HSS-E
auf Bestellung 1 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
1+71.5 EUR
Im Einkaufswagen  Stück im Wert von  UAH
35430 VOLKEL-EN.pdf VOLKEL-DE.pdf
35430
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; M4; 0.7; L: 63mm; Holder: machine; 3.4mm; ISO2/6H
Type of tool: tap
Thread: M4
Thread pitch: 0.7
Length: 63mm
Conform to the norm: DIN 371
Kind of holder: machine
Holder socket size - mm: 3.4mm
Material: high speed steel cobalt HSS-E
Tolerance: ISO2/6H
Tools application: stainless steel; to the through holes
auf Bestellung 16 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
7+11.34 EUR
8+9.97 EUR
10+8.92 EUR
Mindestbestellmenge: 7
Im Einkaufswagen  Stück im Wert von  UAH
35438 VOLKEL-EN.pdf VOLKEL-DE.pdf
35438
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: machine; 4.9mm; ISO2/6H
Type of tool: tap
Thread: M6
Thread pitch: 1
Length: 80mm
Conform to the norm: DIN 371
Kind of holder: machine
Holder socket size - mm: 4.9mm
Material: high speed steel cobalt HSS-E
Tolerance: ISO2/6H
Tools application: stainless steel; to the through holes
auf Bestellung 5 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
5+14.3 EUR
Mindestbestellmenge: 5
Im Einkaufswagen  Stück im Wert von  UAH
36291 VOLKEL-EN.pdf VOLKEL-DE.pdf
36291
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; M4; 0.7; Holder: machine; high speed steel cobalt HSS-E
Type of tool: tap
Thread: M4
Thread pitch: 0.7
Conform to the norm: DIN 371
Kind of holder: machine
Material: high speed steel cobalt HSS-E
Tolerance: ISO2/6H
Tools application: chrome-nickel alloy; for blind holes
Kit contents: drill; tap
Quantity in set/package: 2pcs.
Version: C/39°RSP
auf Bestellung 6 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
5+15.33 EUR
Mindestbestellmenge: 5
Im Einkaufswagen  Stück im Wert von  UAH
36446 VOLKEL-EN.pdf VOLKEL-DE.pdf
36446
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; M10; 1.5; L: 100mm; Holder: machine; 8mm; ISO2/6H; C/39°RSP
Type of tool: tap
Version: C/39°RSP
Conform to the norm: DIN 371
Kind of holder: machine
Tools application: for blind holes; stainless steel
Material: high speed steel cobalt HSS-E
Tolerance: ISO2/6H
Length: 0.1m
Holder socket size - mm: 8mm
Thread pitch: 1.5
Thread: M10
auf Bestellung 2 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
2+35.75 EUR
Mindestbestellmenge: 2
Im Einkaufswagen  Stück im Wert von  UAH
37342 VOLKEL-EN.pdf VOLKEL-DE.pdf
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; M8; 1.25; L: 90mm; Holder: machine; 6.2mm; ISO2/6H
Material: high speed steel cobalt HSS-E
Tolerance: ISO2/6H
Thread: M8
Kind of holder: machine
Type of tool: tap
Tools application: to the through holes
Holder socket size - mm: 6.2mm
Length: 90mm
Thread pitch: 1.25
Conform to the norm: DIN 371
Produkt ist nicht verfügbar
Im Einkaufswagen  Stück im Wert von  UAH
37502 VOLKEL-EN.pdf VOLKEL-DE.pdf
37502
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; M1; 0.25; L: 40mm; Holder: machine; 2.1mm; ISO2/6H
Type of tool: tap
Thread: M1
Thread pitch: 0.25
Length: 40mm
Conform to the norm: DIN 371
Kind of holder: machine
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tolerance: ISO2/6H
Tools application: to the through holes
auf Bestellung 5 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
3+26.27 EUR
5+23.09 EUR
Mindestbestellmenge: 3
Im Einkaufswagen  Stück im Wert von  UAH
37506 VOLKEL-EN.pdf VOLKEL-DE.pdf
37506
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; M1,2; 0.25; L: 40mm; Holder: machine; 2.1mm; ISO2/6H
Type of tool: tap
Thread: M1,2
Thread pitch: 0.25
Length: 40mm
Conform to the norm: DIN 371
Kind of holder: machine
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tolerance: ISO2/6H
Tools application: to the through holes
auf Bestellung 3 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
3+26.27 EUR
Mindestbestellmenge: 3
Im Einkaufswagen  Stück im Wert von  UAH
37538 VOLKEL-EN.pdf VOLKEL-DE.pdf
37538
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 80mm; Holder: machine; 4.9mm; ISO2/6H
Type of tool: tap
Thread: M6
Thread pitch: 1
Length: 80mm
Conform to the norm: DIN 371
Kind of holder: machine
Holder socket size - mm: 4.9mm
Material: high speed steel cobalt HSS-E
Tolerance: ISO2/6H
Tools application: to the through holes
auf Bestellung 5 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
5+14.3 EUR
Mindestbestellmenge: 5
Im Einkaufswagen  Stück im Wert von  UAH
37722 VOLKEL-EN.pdf VOLKEL-DE.pdf
37722
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; M2,5; 0.45; L: 50mm; Holder: machine; 2.1mm; ISO2/6H; C/35°RSP
Type of tool: tap
Thread: M2,5
Thread pitch: 0.45
Length: 50mm
Conform to the norm: DIN 371
Kind of holder: machine
Holder socket size - mm: 2.1mm
Material: high speed steel cobalt HSS-E
Tolerance: ISO2/6H
Tools application: for blind holes
Version: C/35°RSP
auf Bestellung 21 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
5+15.23 EUR
10+13.6 EUR
Mindestbestellmenge: 5
Im Einkaufswagen  Stück im Wert von  UAH
38550 VOLKEL-EN.pdf VOLKEL-DE.pdf
38550
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; M12; 1.75; L: 110mm; Holder: machine; 7mm; ISO2/6H
Type of tool: tap
Thread: M12
Thread pitch: 1.75
Length: 0.11m
Conform to the norm: DIN 376
Kind of holder: machine
Holder socket size - mm: 7mm
Material: high speed steel cobalt HSS-E
Tolerance: ISO2/6H
Tools application: to the through holes
auf Bestellung 3 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
3+23.84 EUR
Mindestbestellmenge: 3
Im Einkaufswagen  Stück im Wert von  UAH
47001 description VOLKEL-EN.pdf VOLKEL-DE.pdf
47001
+1
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tools set: taps; plastic box; Holder: hand; Kit: taps,tap wrench
Kind of package: plastic box
Conform to the norm: DIN 352
Type of tools set: taps
Kind of holder: hand
Thread: M3; M4; M5; M6; M8; M10; M12
Quantity in set/package: 22pcs.
Kit contents: taps; tap wrench
auf Bestellung 1 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
1+99.1 EUR
Im Einkaufswagen  Stück im Wert von  UAH
47005 VOLKEL-EN.pdf VOLKEL-DE.pdf
47005
+1
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tools set: taps; plastic box; Holder: hand; 23pcs.
Kind of package: plastic box
Conform to the norm: DIN 352
Type of tools set: taps
Kind of holder: hand
Thread: M3; M4; M5; M6; M8; M10; M12
Quantity in set/package: 23pcs.
Kit contents: ratchet handle; taps; tap wrench
auf Bestellung 2 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
1+111.03 EUR
Im Einkaufswagen  Stück im Wert von  UAH
47815 VOLKEL-EN.pdf VOLKEL-DE.pdf
47815
+1
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tools set: taps; plastic box; Holder: machine; 7pcs.
Type of tools set: taps
Kind of package: plastic box
Conform to the norm: DIN 371; DIN 376
Kind of holder: machine
Thread: M3; M4; M5; M6; M8; M10; M12
Quantity in set/package: 7pcs.
auf Bestellung 2 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
1+89.55 EUR
Im Einkaufswagen  Stück im Wert von  UAH
63322 VOLKEL-63314.pdf
63322
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; UNC 1/2-13; L: 75mm; Holder: machine; 7mm; Thread: inch,UNC
Type of tool: tap
Thread: UNC 1/2-13
Length: 75mm
Conform to the norm: DIN 352
Kind of holder: machine
Holder socket size - mm: 7mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; UNC
Tools application: to the through holes
auf Bestellung 3 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
3+23.84 EUR
Mindestbestellmenge: 3
Im Einkaufswagen  Stück im Wert von  UAH
63326 VOLKEL-63314.pdf
63326
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; UNC 5/8-11; L: 80mm; Holder: machine; 9mm; Thread: inch,UNC
Type of tool: tap
Thread: UNC 5/8-11
Length: 80mm
Conform to the norm: DIN 352
Kind of holder: machine
Holder socket size - mm: 9mm
Material: high speed steel grounded HSS-G
Kind of thread: inch; UNC
Tools application: to the through holes
auf Bestellung 3 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
3+23.84 EUR
Mindestbestellmenge: 3
Im Einkaufswagen  Stück im Wert von  UAH
63512 VOLKEL-63510.pdf
63512
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; NPT 1/8"; L: 65mm; Holder: machine; 5.5mm; Thread: inch,NPT
Type of tool: tap
Kind of holder: machine
Material: high speed steel grounded HSS-G
Tools application: for blind holes; to the through holes
Application: for cable glands
Kind of thread: inch; NPT
Thread: NPT 1/8"
Holder socket size - mm: 5.5mm
Length: 65mm
auf Bestellung 2 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
2+35.75 EUR
Mindestbestellmenge: 2
Im Einkaufswagen  Stück im Wert von  UAH
65711 VOLKEL-65707.pdf
65711
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; PG11; L: 80mm; Holder: machine; 11mm; to the through holes
Type of tool: tap
Thread: PG11
Length: 80mm
Conform to the norm: DIN 40432
Kind of holder: machine
Holder socket size - mm: 11mm
Material: high speed steel grounded HSS-G
Tools application: to the through holes
Application: for cable glands
auf Bestellung 5 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
3+29.47 EUR
5+25.91 EUR
Mindestbestellmenge: 3
Im Einkaufswagen  Stück im Wert von  UAH
65716 VOLKEL-65707.pdf
65716
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; PG16; L: 80mm; Holder: machine; 14.5mm; to the through holes
Tools application: to the through holes
Application: for cable glands
Kind of holder: machine
Material: high speed steel grounded HSS-G
Conform to the norm: DIN 40432
Thread: PG16
Type of tool: tap
Holder socket size - mm: 14.5mm
Length: 80mm
auf Bestellung 2 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
2+42.29 EUR
Mindestbestellmenge: 2
Im Einkaufswagen  Stück im Wert von  UAH
66326 VOLKEL-66318.pdf
66326
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; M8; 1; L: 56mm; Holder: machine; 4.9mm; Thread: fine thread
Type of tool: tap
Thread: M8
Thread pitch: 1
Length: 56mm
Conform to the norm: DIN 2181
Kind of holder: machine
Holder socket size - mm: 4.9mm
Material: high speed steel grounded HSS-G
Tools application: to the through holes
Kind of thread: fine thread
auf Bestellung 10 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
10+7.15 EUR
Mindestbestellmenge: 10
Im Einkaufswagen  Stück im Wert von  UAH
66336 VOLKEL-66318.pdf
66336
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; M10; 1; L: 63mm; Holder: machine; 5.5mm; Thread: fine thread
Type of tool: tap
Thread: M10
Thread pitch: 1
Length: 63mm
Conform to the norm: DIN 2181
Kind of holder: machine
Holder socket size - mm: 5.5mm
Material: high speed steel grounded HSS-G
Tools application: to the through holes
Kind of thread: fine thread
auf Bestellung 4 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
4+17.88 EUR
Mindestbestellmenge: 4
Im Einkaufswagen  Stück im Wert von  UAH
66344 VOLKEL-66318.pdf
66344
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; M12; 1; L: 70mm; Holder: machine; 7mm; Thread: fine thread
Type of tool: tap
Thread: M12
Thread pitch: 1
Length: 70mm
Conform to the norm: DIN 2181
Kind of holder: machine
Holder socket size - mm: 7mm
Material: high speed steel grounded HSS-G
Tools application: to the through holes
Kind of thread: fine thread
auf Bestellung 3 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
3+23.84 EUR
Mindestbestellmenge: 3
Im Einkaufswagen  Stück im Wert von  UAH
66370 VOLKEL-66318.pdf
66370
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; M18; 1; L: 80mm; Holder: machine; 11mm; Thread: fine thread
Type of tool: tap
Thread: M18
Thread pitch: 1
Length: 80mm
Conform to the norm: DIN 2181
Kind of holder: machine
Holder socket size - mm: 11mm
Material: high speed steel grounded HSS-G
Tools application: to the through holes
Kind of thread: fine thread
auf Bestellung 2 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
2+35.75 EUR
Mindestbestellmenge: 2
Im Einkaufswagen  Stück im Wert von  UAH
67010 VOLKEL-EN.pdf VOLKEL-DE.pdf
67010
+1
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tools set: taps; plastic box; 6.3mm; 1/4"; ISO2/6H; 6pcs.
Material: high speed steel grounded HSS-G
Kind of package: plastic box
Type of tools set: taps
Tolerance: ISO2/6H
Holder socket size - mm: 6.3mm
Quantity in set/package: 6pcs.
Holder socket size - inch: 1/4"
auf Bestellung 3 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
2+36.78 EUR
Mindestbestellmenge: 2
Im Einkaufswagen  Stück im Wert von  UAH
67020 VOLKEL-EN.pdf VOLKEL-DE.pdf
67020
+1
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tools set: taps; plastic box; Kit: 1/4" adapter,taps,drill bits
Material: high speed steel grounded HSS-G
Kind of package: plastic box
Type of tools set: taps
Tolerance: ISO2/6H
Holder socket size - mm: 6.3mm
Quantity in set/package: 13pcs.
Holder socket size - inch: 1/4"
Kit contents: 1/4" adapter; drill bits; taps
auf Bestellung 2 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
2+60.42 EUR
Mindestbestellmenge: 2
Im Einkaufswagen  Stück im Wert von  UAH
80538 VOLKEL-EN.pdf VOLKEL-DE.pdf
80538
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 66mm; Holder: machine; 5mm; ISO2/6H
Type of tool: tap
Thread: M6
Thread pitch: 1
Length: 66mm
Conform to the norm: ISO 529
Kind of holder: machine
Holder socket size - mm: 5mm
Material: high speed steel grounded HSS-G
Tolerance: ISO2/6H
Tools application: to the through holes
auf Bestellung 17 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
14+5.39 EUR
16+4.73 EUR
17+4.2 EUR
Mindestbestellmenge: 14
Im Einkaufswagen  Stück im Wert von  UAH
90538 VOLKEL-EN.pdf VOLKEL-DE.pdf
90538
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 62mm; Holder: machine; 4.5mm; ISO2/6H
Type of tool: tap
Thread: M6
Thread pitch: 1
Length: 62mm
Conform to the norm: JIS B-4430
Kind of holder: machine
Holder socket size - mm: 4.5mm
Material: high speed steel cobalt HSS-E
Tolerance: ISO2/6H
Tools application: to the through holes
auf Bestellung 24 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
16+4.5 EUR
18+3.99 EUR
21+3.55 EUR
Mindestbestellmenge: 16
Im Einkaufswagen  Stück im Wert von  UAH
90726 VOLKEL-EN.pdf VOLKEL-DE.pdf
90726
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; M4; 0.7; L: 52mm; Holder: machine; 4mm; ISO2/6H; for blind holes
Type of tool: tap
Thread: M4
Thread pitch: 0.7
Length: 52mm
Conform to the norm: JIS B-4430
Kind of holder: machine
Holder socket size - mm: 4mm
Material: high speed steel cobalt HSS-E
Tolerance: ISO2/6H
Tools application: for blind holes
Version: C/35°RSP
auf Bestellung 27 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
18+4.15 EUR
20+3.63 EUR
22+3.26 EUR
Mindestbestellmenge: 18
Im Einkaufswagen  Stück im Wert von  UAH
90738 VOLKEL-EN.pdf VOLKEL-DE.pdf
90738
Hersteller: VÖLKEL
Category: Threading Dies and Taps
Description: Tap; M6; 1; L: 62mm; Holder: machine; 4.5mm; ISO2/6H; for blind holes
Type of tool: tap
Thread: M6
Thread pitch: 1
Length: 62mm
Conform to the norm: JIS B-4430
Kind of holder: machine
Holder socket size - mm: 4.5mm
Material: high speed steel cobalt HSS-E
Tolerance: ISO2/6H
Tools application: for blind holes
Version: C/35°RSP
auf Bestellung 13 Stücke:
Lieferzeit 14-21 Tag (e)
Anzahl Preis
13+5.51 EUR
Mindestbestellmenge: 13
Im Einkaufswagen  Stück im Wert von  UAH