Produkte > BROQUETAS > Alle Produkte des Herstellers BROQUETAS (141) > Seite 1 nach 3

Hersteller: BROQUETAS
Category: Solder wires - lead free
Description: Tin; lead free; Sn96Ag4; 1mm; 16g; phial; 221°C; Flux: SW26
Type of solder: tin
Kind of solder: lead free
Appearance: soldering wire
Alloy composition: Sn96Ag4
Diameter: 1mm
Binder weight: 16g
Kind of package: phial
Kind of flux: halide; No Clean; ROM1; rosin
Flux name: SW26
Version: for soft soldering
Flux residues: non-corrosive; yes
Signal word: Warning
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
Melting point: 221°C
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004

Hersteller: BROQUETAS
Category: Solder wires - lead free
Description: Tin; lead free; Sn96Ag4; 1mm; 10g; phial; 221°C; Flux: SW26
Type of solder: tin
Kind of solder: lead free
Appearance: soldering wire
Alloy composition: Sn96Ag4
Diameter: 1mm
Binder weight: 10g
Kind of package: phial
Kind of flux: halide; No Clean; ROM1; rosin
Flux name: SW26
Version: for soft soldering
Flux residues: non-corrosive; yes
Signal word: Warning
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
Melting point: 221°C
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004

Hersteller: BROQUETAS
Category: Solders - other: lead free
Description: Tin; lead free; Sn99Cu0,7Ag0,3; 157g; 217÷227°C; 9x4mm; Flux: SW26
Type of solder: tin
Appearance: stick
Kind of solder: lead free
Alloy composition: Sn99Cu0,7Ag0,3
Binder weight: 157g
Melting point: 217...227°C
Version: for soft soldering
Flux name: SW26
Flux residues: non-corrosive; yes
Kind of flux: halide; No Clean; ROM1; rosin
Profile raster: 9x4mm
Conform to the norm: EN ISO 9453

Hersteller: BROQUETAS
Category: Solder wires - lead free
Description: Tin; lead free; Sn99Cu0,7Ag0,3; 0.7mm; 0.1kg; reel; 217÷227°C
Type of solder: tin
Kind of solder: lead free
Appearance: soldering wire
Alloy composition: Sn99Cu0,7Ag0,3
Diameter: 0.7mm
Binder weight: 0.1kg
Kind of package: reel
Kind of flux: halide; No Clean; ROM1; rosin
Melting point: 217...227°C
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Flux name: SW26
Version: for soft soldering
Flux residues: non-corrosive; yes
GHS Code: GHS07
Signal word: Warning
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.

Hersteller: BROQUETAS
Category: Solder wires - lead free
Description: Tin; lead free; Sn99Cu0,7Ag0,3; 0.5mm; 0.25kg; reel; 217÷227°C
Type of solder: tin
Appearance: soldering wire
Kind of solder: lead free
Alloy composition: Sn99Cu0,7Ag0,3
Binder weight: 0.25kg
Melting point: 217...227°C
Version: for soft soldering
Flux name: SW26
Flux residues: non-corrosive; yes
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
GHS Code: GHS07
Signal word: Warning
Diameter: 0.5mm
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.

Hersteller: BROQUETAS
Category: Solder wires - lead free
Description: Tin; lead free; Sn99Cu0,7Ag0,3; 0.7mm; 0.25kg; reel; 217÷227°C
Type of solder: tin
Appearance: soldering wire
Kind of solder: lead free
Alloy composition: Sn99Cu0,7Ag0,3
Binder weight: 0.25kg
Melting point: 217...227°C
Version: for soft soldering
Flux name: SW26
Flux residues: non-corrosive; yes
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
GHS Code: GHS07
Signal word: Warning
Diameter: 0.7mm
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.

Hersteller: BROQUETAS
Category: Solder wires - lead free
Description: Tin; lead free; Sn99Cu0,7Ag0,3; 1mm; 0.25kg; reel; 217÷227°C
Type of solder: tin
Kind of solder: lead free
Appearance: soldering wire
Alloy composition: Sn99Cu0,7Ag0,3
Diameter: 1mm
Binder weight: 0.25kg
Kind of package: reel
Kind of flux: halide; No Clean; ROM1; rosin
Flux name: SW26
Version: for soft soldering
Flux residues: non-corrosive; yes
Melting point: 217...227°C
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
GHS Code: GHS07
Signal word: Warning
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.

Hersteller: BROQUETAS
Category: Solder wires - lead free
Description: Tin; lead free; Sn99Cu0,7Ag0,3; 0.7mm; 0.5kg; reel; 217÷227°C
Type of solder: tin
Appearance: soldering wire
Kind of solder: lead free
Alloy composition: Sn99Cu0,7Ag0,3
Binder weight: 0.5kg
Melting point: 217...227°C
Version: for soft soldering
Flux name: SW26
Flux residues: non-corrosive; yes
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
GHS Code: GHS07
Signal word: Warning
Diameter: 0.7mm
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.

Hersteller: BROQUETAS
Category: Solder wires - lead free
Description: Tin; lead free; Sn99Cu0,7Ag0,3; 1mm; 0.5kg; reel; 217÷227°C
Type of solder: tin
Appearance: soldering wire
Kind of solder: lead free
Alloy composition: Sn99Cu0,7Ag0,3
Binder weight: 0.5kg
Melting point: 217...227°C
Version: for soft soldering
Flux name: SW26
Flux residues: non-corrosive; yes
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: reel
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
GHS Code: GHS07
Signal word: Warning
Diameter: 1mm
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.

Hersteller: BROQUETAS
Category: Solder wires - lead free
Description: Tin; lead free; Sn99Cu0,7Ag0,3; 1mm; 16g; phial; 217÷227°C
Type of solder: tin
Appearance: soldering wire
Kind of solder: lead free
Alloy composition: Sn99Cu0,7Ag0,3
Binder weight: 16g
Melting point: 217...227°C
Version: for soft soldering
Flux name: SW26
Flux residues: non-corrosive; yes
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: phial
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Signal word: Warning
Diameter: 1mm
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.

Hersteller: BROQUETAS
Category: Solder wires - lead free
Description: Tin; lead free; Sn99Cu0,7Ag0,3; 1mm; 10g; phial; 217÷227°C
Type of solder: tin
Appearance: soldering wire
Kind of solder: lead free
Alloy composition: Sn99Cu0,7Ag0,3
Binder weight: 10g
Melting point: 217...227°C
Version: for soft soldering
Flux name: SW26
Flux residues: non-corrosive; yes
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: phial
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Signal word: Warning
Diameter: 1mm
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.

Hersteller: BROQUETAS
Category: Solder wires - lead free
Description: Tin; lead free; Sn96,5Ag3Cu0,5; 1mm; 16g; phial; 217÷220°C
Type of solder: tin
Kind of solder: lead free
Appearance: soldering wire
Alloy composition: Sn96,5Ag3Cu0,5
Diameter: 1mm
Binder weight: 16g
Kind of package: phial
Kind of flux: halide; No Clean; ROM1; rosin
Flux name: SW26
Version: for soft soldering
Flux residues: non-corrosive; yes
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
GHS Code: GHS07
Signal word: Warning
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
Melting point: 217...220°C

Hersteller: BROQUETAS
Category: Solder wires - lead free
Description: Tin; lead free; Sn96,5Ag3Cu0,5; 1mm; 10g; phial; 217÷220°C
Type of solder: tin
Kind of solder: lead free
Appearance: soldering wire
Alloy composition: Sn96,5Ag3Cu0,5
Diameter: 1mm
Binder weight: 10g
Kind of package: phial
Kind of flux: halide; No Clean; ROM1; rosin
Flux name: SW26
Version: for soft soldering
Flux residues: non-corrosive; yes
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
GHS Code: GHS07
Signal word: Warning
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
Melting point: 217...220°C

Hersteller: BROQUETAS
Category: Solder wires - lead free
Description: Tin; lead free; Sn99,3Cu0,7; 1mm; 16g; phial; 220°C; Flux: SW26
Type of solder: tin
Kind of solder: lead free
Appearance: soldering wire
Alloy composition: Sn99,3Cu0,7
Diameter: 1mm
Binder weight: 16g
Kind of package: phial
Kind of flux: halide; No Clean; ROM1; rosin
Melting point: 220°C
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Flux name: SW26
Version: for soft soldering
Flux residues: non-corrosive; yes
Signal word: Warning
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.

Hersteller: BROQUETAS
Category: Solder wires - lead free
Description: Tin; lead free; Sn99,3Cu0,7; 1mm; 10g; phial; 220°C; Flux: SW26
Type of solder: tin
Kind of solder: lead free
Appearance: soldering wire
Alloy composition: Sn99,3Cu0,7
Diameter: 1mm
Binder weight: 10g
Kind of package: phial
Kind of flux: halide; No Clean; ROM1; rosin
Melting point: 220°C
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Flux name: SW26
Version: for soft soldering
Flux residues: non-corrosive; yes
Signal word: Warning
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.

Hersteller: BROQUETAS
Category: Solders - other: lead based
Description: Tin; lead-based; 183÷190°C; Sn60Pb40; 165÷185g; stick; 9x4mm
Type of solder: tin
Kind of solder: lead-based
Appearance: stick
Alloy composition: Sn60Pb40
Binder weight: 165...185g
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Profile raster: 9x4mm
Conform to the norm: EN ISO 9453
Applications of soldering equipment: immersion soldering; solder pots; wave soldering

Hersteller: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 1mm; 100g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 1mm
Binder weight: 0.1kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004

Hersteller: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 0.5mm; 250g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 0.5mm
Binder weight: 0.25kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004

Hersteller: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 0.7mm; 250g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 0.7mm
Binder weight: 0.25kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004

Hersteller: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 0.9mm; 250g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 0.9mm
Binder weight: 0.25kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004

Hersteller: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 1mm; 250g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 1mm
Binder weight: 0.25kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004

Hersteller: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 0.5mm; 500g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 0.5mm
Binder weight: 0.5kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004

Hersteller: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 0.7mm; 500g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 0.7mm
Binder weight: 0.5kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004

Hersteller: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 1mm; 500g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 1mm
Binder weight: 0.5kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004

Hersteller: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 1mm; 16g; phial; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 1mm
Binder weight: 16g
Kind of package: phial
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004

Hersteller: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 1mm; 10g; phial; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 1mm
Binder weight: 10g
Kind of package: phial
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004

Hersteller: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn63Pb37; 1mm; 16g; phial; 183°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Alloy composition: Sn63Pb37
Binder weight: 16g
Appearance: soldering wire
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Version: for soft soldering
GHS Code: GHS07; GHS08
Flux residues: non-corrosive; yes
Melting point: 183°C
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: phial
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Diameter: 1mm
Flux name: SW26

Hersteller: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn63Pb37; 1mm; 10g; phial; 183°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Alloy composition: Sn63Pb37
Binder weight: 10g
Appearance: soldering wire
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360: May damage fertility or the unborn child; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Version: for soft soldering
GHS Code: GHS07; GHS08
Flux residues: non-corrosive; yes
Melting point: 183°C
Kind of flux: halide; No Clean; ROM1; rosin
Kind of package: phial
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Diameter: 1mm
Flux name: SW26

Hersteller: BROQUETAS
Category: Fluxes
Description: Flux: rosin-free; halide-free,REL0,synthetic; paste; syringe
Type of flux: rosin-free
Kind of flux: halide-free; REL0; synthetic
Appearance: paste
Kind of package: syringe
Capacity: 10ml
Signal word: Warning
Hazard statements: H315: Causes skin irritation; H319: Causes serious eye irritation
Precautionary statements: P202: Do not handle until all safety precautions have been read and understood.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P270: Do no eat, drink or smoke when using this product.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P363: Wash contaminated clothing before reuse; P411: Store at temperatures not exceeding ...°C/...°F.; P501: Dispose of contents/container to ...
GHS Code: GHS07
Colour: yellow
Agent features: good wetting and spreading properties; high activity; residues visible under UV light; soldering flux paste can be done with the aid of hot air or soldering irons; suitable for dip tinning; very high thermal stability

Hersteller: BROQUETAS
Category: Fluxes
Description: Flux: rosin-free; liquid; bottle; 15ml; colourless
Applications of soldering equipment: industrial; reworking and repairing of circuit boards; wave soldering
Signal word: Warning
Standard equipment: fine brush
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P272: Contaminated work clothing should not be allowed out of the workplace.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P321: Specific treatment (see ...on this label).; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P363: Wash contaminated clothing before reuse; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
Colour: colourless
Type of flux: rosin-free
Flux residues: transparent; yes
Capacity: 15ml
Soldering equipment features: can be washed down with water based agents; water based
Kind of flux: halide-free; No Clean; organic; ORL0; Water Soluble
Kind of package: bottle
Appearance: liquid
GHS Code: GHS07

Hersteller: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 0.5mm; 100g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 0.5mm
Binder weight: 0.1kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004

Hersteller: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 0.7mm; 100g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 0.7mm
Binder weight: 0.1kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004

Hersteller: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 0.8mm; 1000g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 0.8mm
Binder weight: 1kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004

Hersteller: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 0.8mm; 100g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 0.8mm
Binder weight: 0.1kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004

Hersteller: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 0.8mm; 250g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 0.8mm
Binder weight: 0.25kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004

Hersteller: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 0.8mm; 500g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 0.8mm
Binder weight: 0.5kg
Kind of package: reel
Kind of flux: halide; No Clean; ROM1; rosin
Melting point: 183...190°C
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004
Flux name: SW26
Version: for soft soldering
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.

Hersteller: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 1.2mm; 100g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 1.2mm
Binder weight: 0.1kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004

Hersteller: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 1.2mm; 250g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 1.2mm
Binder weight: 0.25kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004

Hersteller: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 1.5mm; 100g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 1.5mm
Binder weight: 0.1kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004

Hersteller: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 1.5mm; 1000g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 1.5mm
Binder weight: 1kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004

Hersteller: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 1.5mm; 250g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 1.5mm
Binder weight: 0.25kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004

Hersteller: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 1.5mm; 500g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 1.5mm
Binder weight: 0.5kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004

Hersteller: BROQUETAS
Category: Solder wires - lead based
Description: Tin; lead-based; Sn60Pb40; 2mm; 250g; reel; 183÷190°C; Flux: SW26
Type of solder: tin
Kind of solder: lead-based
Appearance: soldering wire
Alloy composition: Sn60Pb40
Diameter: 2mm
Binder weight: 0.25kg
Kind of package: reel
Melting point: 183...190°C
Kind of flux: halide; No Clean; ROM1; rosin
Version: for soft soldering
Application: in the electronics industry
Information: Products are intended for professional and industrial use only, and are not suitable for consumer or household use.
Flux name: SW26
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H360FD: May damage fertility. May damage the unborn child.; H362: May cause harm to breast-fed children.; H372: Causes damage to organs
Precautionary statements: P201: Obtain special instructions before use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P263: Avoid contact during pregnancy/while nursing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P501: Dispose of contents/container to ...
Flux residues: non-corrosive; yes
GHS Code: GHS07; GHS08
Conform to the norm: EN 29454-1; EN ISO 9453; J-STD-004