Produkte > MARKI MICROWAVE > Alle Produkte des Herstellers MARKI MICROWAVE (56) > Seite 1 nach 1

Hersteller: Marki Microwave
RF Amplifier A broadband, efficient GaAs PHEMT distributed amplifier in a 4mm QFN surface mount package. It is designed to provide optimal LO drive for T3 mixers and offers 13 dB typical gain and 20 dBm typical saturated output power for 165 mA of current

Hersteller: Marki Microwave
Signal Conditioning The ADM1-0026PA is a complete LO driver solution for use with all Marki mixers up to 26.5 GHz. This single-stage packaged GaAs MMIC distributed amplifier integrates all required biasing circuitry.

Hersteller: Marki Microwave
Signal Conditioning A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 6 GHz bandwidth.

Hersteller: Marki Microwave
Signal Conditioning A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 9 GHz bandwidth.

Hersteller: Marki Microwave
Signal Conditioning The BAL-0067 is a broadband balun, featuring high isolation and is hand-tuned for optimal phase and amplitude balance over a 300 kHz to 67 GHz bandwidth.

Hersteller: Marki Microwave
Signal Conditioning A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 6 GHz bandwidth.

Hersteller: Marki Microwave
Signal Conditioning The BT-0018 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.

Hersteller: Marki Microwave
Signal Conditioning The BT-0040 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.

Hersteller: Marki Microwave
RF Adapters - Tee The BT2-0040 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.

Hersteller: Marki Microwave
RF Adapters - Tee The BTN-0050 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.

Hersteller: Marki Microwave
Signal Conditioning The C20-0226 is a broadband 2-26.5 GHz, 20 dB directional coupler. The multisection tri-plate stripline design exhibits excellent coupling flatness and VSWR at all ports.

Hersteller: Marki Microwave
Signal Conditioning The C20-0240 is a broadband 2-40 GHz, 20 dB directional coupler. The multisection tri-plate stripline design exhibits excellent coupling flatness and VSWR at all ports.

Hersteller: Marki Microwave
Signal Conditioning The CE16-0220T is a next generation broadband 2GHz to 20GHz, 16dB directional coupler from the Marki Elite Series. Conductive paint is applied to all Elite Series products to reduce EMI/RFI leakage and susceptibility.

Hersteller: Marki Microwave
RF Development Tools The EVB-ATN06-0050 is a connectorized evaluation board for the ATN06-0050CSPI Chip Scale Package surface mount 50 GHz 6dB Attenuator.

Hersteller: Marki Microwave
RF Development Tools The EVB-MFBC-00010P is a connectorized evaluation board for the MFBC-00010PSM passive MMIC surface mount 14.6018.90 GHz bandpass filter.

Hersteller: Marki Microwave
RF Development Tools The MFBP-00010P is a connectorized evaluation board for the MFBP-00010PSM passive MMIC surface mount 2.20-5.90 GHz bandpass filters.

Hersteller: Marki Microwave
Signal Conditioning The FB series bandpass filters are CAD-optimized microstrip filter designs built on a low-loss substrate. These filters feature low insertion loss, excellent return loss and are suitable for high rejection filtering.

Hersteller: Marki Microwave
Signal Conditioning The FB series bandpass filters are CAD-optimized microstrip filter designs built on a low-loss substrate. These filters feature low insertion loss, excellent return loss and are suitable for high rejection filtering.

Hersteller: Marki Microwave
Signal Conditioning The FB series bandpass filters are CAD-optimized microstrip filter designs built on a low-loss substrate. These filters feature low insertion loss, excellent return loss and are suitable for high rejection filtering.

Hersteller: Marki Microwave
Signal Conditioning The FB series bandpass filters are CAD-optimized microstrip filter designs built on a low-loss substrate. These filters feature low insertion loss, excellent return loss and are suitable for high rejection filtering.

Hersteller: Marki Microwave
Signal Conditioning The MBAL-0220SM is a GaAs passive MMIC balun in a 4mm QFN surface mount package. Its frequency ranges from 2 to 20 GHz and offers a 1:2 impedance ratio.

Hersteller: Marki Microwave
Signal Conditioning The MBAL-0R520CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 31 dB common mode rejection over a 0.5 to 20 GHz operational bandwidth. It is footprint compatible with the 1:1 MBALH-0R520CSP2, offering flexibility in system

Hersteller: Marki Microwave
Signal Conditioning MC16-0222SM is a MMIC 2-22 GHz Directional Coupler. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions. The MC16-0222SM is available as a 4 X 4 mm QFN pac

Hersteller: Marki Microwave
Equalisers A passive MMIC equalizer CSP ideal for compensating for low pass filtering effects in RF/microwave and high speed digital systems. The MEQ6-45CSP1 provides positive slope from DC to 45GHz with a DC attenuation of 6dB.

Hersteller: Marki Microwave
Equalisers The MEQ7-20ASM passive MMIC equalizer QFN is an ideal solution for compensating for low pass filtering effects in RF/microwave and high speed digital systems, providing positive slope from DC to 20GHz with DC attenuation options between 0 and 1

Hersteller: Marki Microwave
Signal Conditioning The MFLP-00010PSM is a passive MMIC surface mount 4.5 GHz lowpass filter that is an ideal solution for small form factor, high rejection filtering.The MFLP-00010PSM is available as a 5x5mm plastic QFN.

Hersteller: Marki Microwave
RF Mixer The MM1-0222LSM is a GaAs MMIC double balanced mixer that features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth. MM1-0222LSM works well as both an up and down converter through Ku band and beyon

Hersteller: Marki Microwave
Signal Conditioning The MM1-0312H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor.

Hersteller: Marki Microwave
RF Mixer The MM2-0530LSM is a passive MMIC triple balanced mixer. It features a broadband IF port that spans from 2 to 20 GHz, and has excellent spurious suppression. The MM2-0530LSM is 4x4 mm QFN packaged.

Hersteller: Marki Microwave
Signal Conditioning The MMD-0415HPSM is a MMIC doubler fabricated with GaAs Schottky diodes. This part operates over a 2 to 7.5 GHz input frequency range or a doubled output frequency range of 4 to 15 GHz.

Hersteller: Marki Microwave
RF Mixer The MMIQ-0205HSM is a miniaturized, surface-mount multi-octave 1.75-5.0 GHz IQ mixer. It features matched double balanced mixers connected with an integrated LO hybrid and RF power divider. It can be used for either upconversion or downconversion

Hersteller: Marki Microwave
Signal Conditioning MMIQ-0218L is a low LO drive, passive GaAs MMIC IQ mixer that operates across a 9:1 bandwidth. This is an ultra-broadband mixer spanning 2 to 18GHz on the RF and LO ports with an IF from DC to 3 GHz.

Hersteller: Marki Microwave
Signal Conditioning MMIQ-0520L is a low LO drive, passive GaAs MMIC IQ mixer that operates down to an unrivaled +3 dBm LO drive level. This is an ultra-broadband mixer spanning 5 to 20GHz on the RF and LO ports with an IF from DC to 6 GHz.

Hersteller: Marki Microwave
Signal Conditioning The MPD-0108FCSP2 is a small footprint MMIC 1-8 GHz 2-Way power divider/power splitter featuring high 23 dB isolation and low 0.8 dB insertion loss in our compact CSP2 chip scale package.

Hersteller: Marki Microwave
Signal Conditioning The MPD-0108SCSP2 is a small footprint MMIC 1-8 GHz 2-Way power divider/power splitter featuring high 23 dB isolation and low 0.9 dB insertion loss in our compact CSP2 chip scale package.

Hersteller: Marki Microwave
Signal Conditioning The MPD-0422FCSP2 is a small footprint MMIC 4-22 GHz 2-Way power divider/power splitter featuring high 24 dB isolation and low 0.7 dB insertion loss in our compact CSP2 chip scale package.

Hersteller: Marki Microwave
Signal Conditioning The MPD-0422SCSP2 is a small footprint MMIC 4-22 GHz 2-Way power divider/power splitter featuring high 22 dB isolation and low 0.9 dB insertion loss in our compact CSP2 chip scale package.

Hersteller: Marki Microwave
Signal Conditioning The MPD2-00001PSM is a small footprint MMIC 0.4-4 GHz 2-Way Wilkinson power divider/power splitter featuring high 16 dB isolation and low 0.9 dB insertion loss in our compact DFN package.

Hersteller: Marki Microwave
Signal Conditioning The MPD4-0108CSP2 is a small footprint MMIC 1-8 GHz 4-Way power divider/power splitter featuring high 30 dB isolation and low 2.6 dB insertion loss in our compact CSP2 chip scale package.

Hersteller: Marki Microwave
Signal Conditioning The MPD4-0R404CSP2 is a small footprint MMIC 0.4-4 GHz 4-Way power divider/power splitter featuring high 20 dB isolation and 3.4 dB insertion loss in our compact CSP2 chip scale package.

Hersteller: Marki Microwave
RF Mixer The MT3-0113HCQG is a triple balanced passive diode GaAs MMIC mixer offering high dynamic range, low conversion loss, and excellent repeatability.

Hersteller: Marki Microwave
RF Mixer The MT3-0113HCQG is a triple balanced passive diode GaAs MMIC mixer offering high dynamic range, low conversion loss, and excellent repeatability.

Hersteller: Marki Microwave
RF Mixer The MT3-0113LCQG is a triple balanced passive diode GaAs MMIC mixer offering high dynamic range, low conversion loss, and excellent repeatability.

Hersteller: Marki Microwave
RF Mixer The MT3-0113SCQG is a triple balanced passive diode GaAs MMIC mixer offering high dynamic range, low conversion loss, and excellent repeatability.

Hersteller: Marki Microwave
Signal Conditioning The PBR-0003 is a 300 kHz to 3 GHz high isolation power combiner. This power combiner features a unique hand tuned construction based on a bridge coupler that enables 45 dB typical isolation across the operational bandwidth.

Hersteller: Marki Microwave
Signal Conditioning The PBR-0006 is a 300 kHz to 6 GHz high isolation power combiner. This power combiner features a unique hand tuned construction based on a bridge coupler that enables 40 dB typical isolation across the operational bandwidth.

Hersteller: Marki Microwave
Signal Conditioning The PBR-0006SMG is a 10 MHz to 6 GHz surface mount high isolation power combiner. This power combiner features a unique hand tuned construction that enables 35 dB typical isolation across the operational bandwidth.

Hersteller: Marki Microwave
Signal Conditioning The PBR-0012 is a 300 kHz to 12 GHz high isolation power combiner. This power combiner features a unique hand tuned construction based on a bridge coupler that enables 35 dB typical isolation across the operational bandwidth.

Hersteller: Marki Microwave
Signal Conditioning The PBR-0012SMG is a 10 MHz to 12 GHz surface mount high isolation power combiner. This power combiner features a unique hand tuned construction that enables 30 dB typical isolation across the operational bandwidth.

Hersteller: Marki Microwave
Signal Conditioning A resistive 2-way power divider that features broadband operation from DC to 20 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.

Hersteller: Marki Microwave
Signal Conditioning A resistive 2-way power divider that features broadband operation from DC to 30 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.

Hersteller: Marki Microwave
Signal Conditioning A surface mount resistive 2-way power divider that features broadband operation from DC to 30 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.

Hersteller: Marki Microwave
Signal Conditioning A resistive 2-way power divider that features broadband operation from DC to 40 GHz. Resistive power dividers offer 6 dB nominal insertion loss and excellent amplitude and phase balance.

Hersteller: Marki Microwave
Signal Conditioning The T3-07 is a high performance mixer featuring LO/RF from 1 MHz to 7 GHz and IF from 1 MHz to 4 GHz.

Hersteller: Marki Microwave
Signal Conditioning The T3-18G is a high performance mixer featuring LO/RF from 10 MHz to 18 GHz and IF from 1 MHz to 10 GHz.

Hersteller: Marki Microwave
Signal Conditioning The T3-20G is a high performance mixer featuring LO/RF from 10 MHz to 20 GHz and IF from 1 MHz to 10 GHz.