Produkte > MARKI MICROWAVE > Alle Produkte des Herstellers MARKI MICROWAVE (361) > Seite 4 nach 7
| Foto | Bezeichnung | Hersteller | Beschreibung | Verfügbarkeit | Privatkunde | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
FLP-1460 | Marki Microwave | Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
FLP-1740 | Marki Microwave | Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
FLP-1800 | Marki Microwave | Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
FLP-1940 | Marki Microwave | Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
FLP-2000 | Marki Microwave | Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
FLP-2150 | Marki Microwave | Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
FLP-2360 | Marki Microwave | Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
FLP-2650 | Marki Microwave | Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
FLP-3200 | Marki Microwave | Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
FLP-3660 | Marki Microwave | Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
FLP-4300 | Marki Microwave | Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
FLP-5000 | Marki Microwave | Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
HLM-40ABH | Marki Microwave | Signal Conditioning The HLM-40ABH is a wide bandwidth GaAs Schottky diode signal limiter featuring high IP3 and medium power handling. It offers low insertion loss and low return loss from DC through Ka band and has a typical 1dB compression point of 9dBm |
auf Bestellung 2 Stücke: Lieferzeit 10-14 Tag (e) |
|
||||||||||
|
MBAL-0104SM | Marki Microwave | Signal Conditioning The MBAL-0104SM is a GaAs passive MMIC balun in a 4mm QFN surface mount package. It features excellent amplitude and phase balance across its 1 to 4 GHz frequency range that offers a 1:2 impedance ratio. |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MBAL-0220CSP2 | Marki Microwave |
Signal Conditioning The MBAL-0220CSP2 is a GaAs passive MMIC balun featuring a frequency range of 2 to 20 GHz. This balun offers low 1.9 dB insertion loss as a mode converter, excellent balance and 27 dB common mode rejection in a compact 2.5 mm CSP2 chip |
auf Bestellung 39 Stücke: Lieferzeit 10-14 Tag (e) |
|
||||||||||
|
MBAL-0220SM | Marki Microwave |
Signal Conditioning The MBAL-0220SM is a GaAs passive MMIC balun in a 4mm QFN surface mount package. Its frequency ranges from 2 to 20 GHz and offers a 1:2 impedance ratio. |
auf Bestellung 21 Stücke: Lieferzeit 10-14 Tag (e) |
|
||||||||||
|
MBAL-0250CSP2 | Marki Microwave |
Signal Conditioning The MBAL-0250CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 35 dB common mode rejection over a 2 to 50 GHz operational bandwidth. |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MBAL-0R106CSP2 | Marki Microwave |
Signal Conditioning The MBAL-0R106CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 33 dB common mode rejection over a 0.1 to 6 GHz operational bandwidth. It is footprint compatible with the 1:1 MBALH-0R106CSP2, offering flexibility in system |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MBAL-0R520CSP2 | Marki Microwave |
Signal Conditioning The MBAL-0R520CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 31 dB common mode rejection over a 0.5 to 20 GHz operational bandwidth. It is footprint compatible with the 1:1 MBALH-0R520CSP2, offering flexibility in system |
auf Bestellung 5 Stücke: Lieferzeit 10-14 Tag (e) |
|
||||||||||
|
MBAL-1445SM | Marki Microwave | Signal Conditioning MBAL-1445 is a high isolation MMIC balun. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions. The MBAL-1445SM is available as a 4 X 4 mm QFN package. |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MBALH-0R106CSP2 | Marki Microwave | Signal Conditioning The MBALH-0R106CSP2 is a GaAs passive MMIC 1:1 balun that features excellent 35 dB common mode rejection over a 0.1 to 6 GHz operational bandwidth. It is footprint compatible with the 1:2 MBAL-0R106CSP2, offering flexibility in system |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MBALH-0R520CSP2 | Marki Microwave |
Signal Conditioning The MBALH-0R520CSP2 is a GaAs passive MMIC 1:1 balun that features excellent 32 dB common mode rejection over a 0.5 to 20 GHz operational bandwidth. It is footprint compatible with the 1:2 MBAL-0R520CSP2, offering flexibility in system |
auf Bestellung 1 Stücke: Lieferzeit 10-14 Tag (e) |
|
||||||||||
|
MC10-25110M2 | Marki Microwave | Signal Conditioning The MC10-25110M2 is a mmWave 25-110 GHz, 10dB directional coupler in our connectorized miniature M2-package enabling operation up to 110 GHz. The coupler features excellent directivity, return loss and coupling accuracy. |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MC16-0222SM | Marki Microwave |
Signal Conditioning MC16-0222SM is a MMIC 2-22 GHz Directional Coupler. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions. The MC16-0222SM is available as a 4 X 4 mm QFN pac |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MEQ10-60ABH | Marki Microwave | Signal Conditioning This equalizer provides 7.8 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 10 dB and a 50-ohm match maintained over the entire operating range. |
auf Bestellung 1 Stücke: Lieferzeit 10-14 Tag (e) |
|
||||||||||
|
MEQ4-60ABH | Marki Microwave | Signal Conditioning This equalizer provides 2.6 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 4 dB and a 50-ohm match maintained over the entire operating range. |
auf Bestellung 1 Stücke: Lieferzeit 10-14 Tag (e) |
|
||||||||||
|
MEQ6-45CSP1 | Marki Microwave | Equalisers A passive MMIC equalizer CSP ideal for compensating for low pass filtering effects in RF/microwave and high speed digital systems. The MEQ6-45CSP1 provides positive slope from DC to 45GHz with a DC attenuation of 6dB. |
Produkt ist nicht verfügbar |
Mindestbestellmenge: 25 Stücke Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MEQ6-60ABH | Marki Microwave | Signal Conditioning This equalizer provides 4 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 6 dB and a 50-ohm match maintained over the entire operating range. |
auf Bestellung 1 Stücke: Lieferzeit 10-14 Tag (e) |
|
||||||||||
|
MEQ6-7ASM | Marki Microwave | Equalisers The MEQ6-7ASM passive MMIC equalizer QFN is an ideal solution for compensating for low pass filtering effects in RF/microwave and high speed digital systems, providing positive slope from DC to 7GHz with DC attenuation options between 3 and 12d |
auf Bestellung 25 Stücke: Lieferzeit 10-14 Tag (e) |
|
||||||||||
|
MEQ7-20ASM | Marki Microwave | Equalisers The MEQ7-20ASM passive MMIC equalizer QFN is an ideal solution for compensating for low pass filtering effects in RF/microwave and high speed digital systems, providing positive slope from DC to 20GHz with DC attenuation options between 0 and 1 |
auf Bestellung 10 Stücke: Lieferzeit 10-14 Tag (e) |
|
||||||||||
|
MFB-1445SM | Marki Microwave |
Signal Conditioning The MFB-1445SM is a passive MMIC bandpass filter. It is an integrated filter that passes Ku-Band frequencies (13.6-15.1 GHz).The MFB-1445SM is available as a 3 X 3 mm QFN package. |
auf Bestellung 30 Stücke: Lieferzeit 10-14 Tag (e) |
|
||||||||||
|
MFBA-00004BH | Marki Microwave | Signal Conditioning This bandpass filter is an ideal solution for small form factor, high rejection filtering; featuring a 8.51-12.11 GHz 1 dBc passband, 2.3 dB center frequency insertion loss and 23 dB return loss. Available in a connectorized bullet hou |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MFBA-00004PSM | Marki Microwave | Signal Conditioning The MFBA-00004PSM family of passive MMIC surface mount bandpass filters are an ideal solution for small form factor, high rejection filtering.The MFBA-00004PSM is available as a 5x5mm plastic QFN. |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MFBC-00004CSP3 | Marki Microwave | Signal Conditioning The MFBC-00004CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. MFBC-00004CSP3 features a 15-19.8GHz 1dBc passband and 1.8dB center frequency insertion loss. |
Produkt ist nicht verfügbar |
Mindestbestellmenge: 25 Stücke Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MFBP-00001PSM | Marki Microwave | Signal Conditioning The MFBP-00001PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00001PSM is available as a 4x4mm plastic QFN. |
Produkt ist nicht verfügbar |
Mindestbestellmenge: 25 Stücke Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MFBP-00002PSM | Marki Microwave | Signal Conditioning The MFBP-00002PSM family of passive MMIC surface mount bandpass filters are an ideal solution for small form factor, high rejection filtering. The MFBP-00002PSM is available as a 4x4mm plastic QFN. |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MFBP-00030PSM | Marki Microwave | Signal Conditioning The MFBP-00030PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00030PSM is available as a 5x5mm plastic QFN. |
Produkt ist nicht verfügbar |
Mindestbestellmenge: 25 Stücke Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MFBP-00064CSP3 | Marki Microwave | Signal Conditioning The MFBP-00064CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering.The MFBP-00064CSP3 is available as a 3.5 mm CSP3. |
Produkt ist nicht verfügbar |
Mindestbestellmenge: 25 Stücke Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MFBP-00065CSP3 | Marki Microwave | Signal Conditioning The MFBP-00065CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00065CSP3 is available as a 3.5 mm CSP3. |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MFBP-00072CSP3 | Marki Microwave | Signal Conditioning The MFBP-00072CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00072CSP3 features a 30.8-36.1GHz 1dBc passband and 2.6dB center frequency insertion loss. |
Produkt ist nicht verfügbar |
Mindestbestellmenge: 25 Stücke Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MFBP-00079CSP3 | Marki Microwave | Signal Conditioning The MFBP-00079CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00079CSP3 is available in our 3.5 x 3.5mm CSP3 chip scale package. |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MFBP-00080CSP3 | Marki Microwave | Signal Conditioning The MFBP-00080CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00080CSP3 is available in our 3.5 x 3.5mm CSP3 chip scale package. |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MFBP-00082CSP3 | Marki Microwave | Signal Conditioning The MFBP-00082CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00082CSP3 features a 14-15.9GHz 1dBc passband and 2.7dB center frequency insertion loss. |
Produkt ist nicht verfügbar |
Mindestbestellmenge: 25 Stücke Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MFBP-00085CSP3 | Marki Microwave | Signal Conditioning The MFBP-00085CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00085CSP3 features a 9-14.4GHz 1dBc passband and 1.8dB center frequency insertion loss. |
Produkt ist nicht verfügbar |
Mindestbestellmenge: 25 Stücke Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MFBP-00086CSP3 | Marki Microwave | Signal Conditioning The MFBP-00086CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00086CSP3 features a 12.7-17.9GHz 1dBc passband and 1.9dB center frequency insertion loss. |
Produkt ist nicht verfügbar |
Mindestbestellmenge: 25 Stücke Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MFBP-00104PSM | Marki Microwave | Signal Conditioning The MFBP-00104PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering.The MFBP-00104PSM is available as a 6 mm plastic QFN. |
Produkt ist nicht verfügbar |
Mindestbestellmenge: 25 Stücke Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MFBP-00110CSP3 | Marki Microwave | Signal Conditioning The MFBP-00110CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00110CSP3 features a 6.0-8.4GHz 1dBc passband and 2.5dB center frequency insertion loss. |
Produkt ist nicht verfügbar |
Mindestbestellmenge: 25 Stücke Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MFBP-00118CSP3 | Marki Microwave | Signal Conditioning The MFBP-00118CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00118CSP3 features a 26.3-39.4GHz 1dBc passband and 1.4dB center frequency insertion loss. |
Produkt ist nicht verfügbar |
Mindestbestellmenge: 25 Stücke Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MFBP-00127CSP3 | Marki Microwave | Signal Conditioning The MFBP-00127CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00127CSP3 is available in our 3.5 x 3.5mm CSP3 chip scale package. |
Produkt ist nicht verfügbar |
Mindestbestellmenge: 25 Stücke Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MFBP-00129CSP3 | Marki Microwave | Signal Conditioning The MFBP-00129CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00129CSP3 is available in our 3.5 x 3.5mm CSP3 chip scale package. |
Produkt ist nicht verfügbar |
Mindestbestellmenge: 25 Stücke Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MFBP-00143CSP3 | Marki Microwave | Signal Conditioning The MFBP-00143CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00143CSP3 features a 10.7-11.3GHz 1dBc passband and 6.0dB center frequency insertion loss. |
Produkt ist nicht verfügbar |
Mindestbestellmenge: 25 Stücke Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MFBP-00144CSP3 | Marki Microwave | Signal Conditioning The MFBP-00144CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00144CSP3 features a 6.9-14.7GHz 1dBc passband and 1.6dB center frequency insertion loss. |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MFBP-00145CSP3 | Marki Microwave | Signal Conditioning The MFBP-00145CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00145CSP3 features a 3.8-16.7GHz 1dBc passband and 0.9dB center frequency insertion loss. |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MFHP-00001BH | Marki Microwave | Signal Conditioning The MFHP-00001BH MMIC highpass filter is an ideal solution for small form factor, high rejection filtering. The MFHP-00001BH features a 1.9 GHz 3 dBc cutoff frequency and 16 dB passband return loss. Available in a connectorized bullet |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MFHP-00001PSM | Marki Microwave | Signal Conditioning The MFHP-00001PSM family of passive MMIC surface mount highpass filters are an ideal solution for small form factor, high rejection filtering. The MFHP-00001PSM is available as a 4x4mm plastic QFN. |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MFLP-00001PSM | Marki Microwave | Signal Conditioning The MFLP-00001PSM is a passive MMIC surface mount 6.1 GHz lowpass filter that is an ideal solution for small form factor, high rejection filtering. The MFLP-00001PSM is available as a 4x4mm plastic QFN. |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MFLP-00010PSM | Marki Microwave | Signal Conditioning The MFLP-00010PSM is a passive MMIC surface mount 4.5 GHz lowpass filter that is an ideal solution for small form factor, high rejection filtering.The MFLP-00010PSM is available as a 5x5mm plastic QFN. |
Produkt ist nicht verfügbar |
Mindestbestellmenge: 25 Stücke Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MFLP-00022CSP1 | Marki Microwave | Signal Conditioning The MFLP-00022CSP1 MMIC surface mount lowpass filter is an ideal solution for extremely small form factor, high rejection filtering. The MFLP-00022CSP1 features a 2.1 GHz 3 dBc cutoff and 27 dB passband return loss. |
Produkt ist nicht verfügbar |
Mindestbestellmenge: 25 Stücke Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MFLP-00024CSP1 | Marki Microwave | Signal Conditioning The MFLP-00024CSP1 MMIC surface mount lowpass filter is an ideal solution for extremely small form factor, high rejection filtering. The MFLP-00024CSP1 features a 4.5 GHz 3 dBc cutoff and 31 dB passband return loss. |
Produkt ist nicht verfügbar |
Mindestbestellmenge: 25 Stücke Im Einkaufswagen Stück im Wert von UAH | ||||||||||
|
MFLP-00025CSP1 | Marki Microwave | Signal Conditioning The MFLP-00025CSP1 MMIC surface mount lowpass filter is an ideal solution for extremely small form factor, high rejection filtering. The MFLP-00025CSP1 features a 4.8 GHz 3 dBc cutoff and 27 dB passband return loss. |
Produkt ist nicht verfügbar |
Mindestbestellmenge: 25 Stücke Im Einkaufswagen Stück im Wert von UAH |
| FLP-1460 |
Hersteller: Marki Microwave
Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference
Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| FLP-1740 |
Hersteller: Marki Microwave
Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference
Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| FLP-1800 |
Hersteller: Marki Microwave
Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference
Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| FLP-1940 |
Hersteller: Marki Microwave
Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference
Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| FLP-2000 |
Hersteller: Marki Microwave
Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference
Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| FLP-2150 |
Hersteller: Marki Microwave
Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference
Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| FLP-2360 |
Hersteller: Marki Microwave
Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference
Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| FLP-2650 |
Hersteller: Marki Microwave
Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference
Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| FLP-3200 |
Hersteller: Marki Microwave
Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference
Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| FLP-3660 |
Hersteller: Marki Microwave
Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference
Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| FLP-4300 |
Hersteller: Marki Microwave
Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference
Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| FLP-5000 |
Hersteller: Marki Microwave
Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference
Signal Conditioning This general purpose low pass filter offers high stop band suppression and low insertion loss in the passband. These filters can be used to eliminate unwanted side bands during frequency conversion or for removing spurious interference
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| HLM-40ABH |
Hersteller: Marki Microwave
Signal Conditioning The HLM-40ABH is a wide bandwidth GaAs Schottky diode signal limiter featuring high IP3 and medium power handling. It offers low insertion loss and low return loss from DC through Ka band and has a typical 1dB compression point of 9dBm
Signal Conditioning The HLM-40ABH is a wide bandwidth GaAs Schottky diode signal limiter featuring high IP3 and medium power handling. It offers low insertion loss and low return loss from DC through Ka band and has a typical 1dB compression point of 9dBm
auf Bestellung 2 Stücke:
Lieferzeit 10-14 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 1+ | 2348.22 EUR |
| MBAL-0104SM |
Hersteller: Marki Microwave
Signal Conditioning The MBAL-0104SM is a GaAs passive MMIC balun in a 4mm QFN surface mount package. It features excellent amplitude and phase balance across its 1 to 4 GHz frequency range that offers a 1:2 impedance ratio.
Signal Conditioning The MBAL-0104SM is a GaAs passive MMIC balun in a 4mm QFN surface mount package. It features excellent amplitude and phase balance across its 1 to 4 GHz frequency range that offers a 1:2 impedance ratio.
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| MBAL-0220CSP2 |
![]() |
Hersteller: Marki Microwave
Signal Conditioning The MBAL-0220CSP2 is a GaAs passive MMIC balun featuring a frequency range of 2 to 20 GHz. This balun offers low 1.9 dB insertion loss as a mode converter, excellent balance and 27 dB common mode rejection in a compact 2.5 mm CSP2 chip
Signal Conditioning The MBAL-0220CSP2 is a GaAs passive MMIC balun featuring a frequency range of 2 to 20 GHz. This balun offers low 1.9 dB insertion loss as a mode converter, excellent balance and 27 dB common mode rejection in a compact 2.5 mm CSP2 chip
auf Bestellung 39 Stücke:
Lieferzeit 10-14 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 1+ | 345.39 EUR |
| 5+ | 287.84 EUR |
| 10+ | 246.7 EUR |
| 25+ | 224.27 EUR |
| MBAL-0220SM |
![]() |
Hersteller: Marki Microwave
Signal Conditioning The MBAL-0220SM is a GaAs passive MMIC balun in a 4mm QFN surface mount package. Its frequency ranges from 2 to 20 GHz and offers a 1:2 impedance ratio.
Signal Conditioning The MBAL-0220SM is a GaAs passive MMIC balun in a 4mm QFN surface mount package. Its frequency ranges from 2 to 20 GHz and offers a 1:2 impedance ratio.
auf Bestellung 21 Stücke:
Lieferzeit 10-14 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 1+ | 531.5 EUR |
| 5+ | 434.86 EUR |
| 10+ | 367.95 EUR |
| 25+ | 334.52 EUR |
| MBAL-0250CSP2 |
![]() |
Hersteller: Marki Microwave
Signal Conditioning The MBAL-0250CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 35 dB common mode rejection over a 2 to 50 GHz operational bandwidth.
Signal Conditioning The MBAL-0250CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 35 dB common mode rejection over a 2 to 50 GHz operational bandwidth.
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| MBAL-0R106CSP2 |
![]() |
Hersteller: Marki Microwave
Signal Conditioning The MBAL-0R106CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 33 dB common mode rejection over a 0.1 to 6 GHz operational bandwidth. It is footprint compatible with the 1:1 MBALH-0R106CSP2, offering flexibility in system
Signal Conditioning The MBAL-0R106CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 33 dB common mode rejection over a 0.1 to 6 GHz operational bandwidth. It is footprint compatible with the 1:1 MBALH-0R106CSP2, offering flexibility in system
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| MBAL-0R520CSP2 |
![]() |
Hersteller: Marki Microwave
Signal Conditioning The MBAL-0R520CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 31 dB common mode rejection over a 0.5 to 20 GHz operational bandwidth. It is footprint compatible with the 1:1 MBALH-0R520CSP2, offering flexibility in system
Signal Conditioning The MBAL-0R520CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 31 dB common mode rejection over a 0.5 to 20 GHz operational bandwidth. It is footprint compatible with the 1:1 MBALH-0R520CSP2, offering flexibility in system
auf Bestellung 5 Stücke:
Lieferzeit 10-14 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 1+ | 392.89 EUR |
| 5+ | 327.39 EUR |
| 10+ | 280.65 EUR |
| 25+ | 255.12 EUR |
| MBAL-1445SM |
Hersteller: Marki Microwave
Signal Conditioning MBAL-1445 is a high isolation MMIC balun. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions. The MBAL-1445SM is available as a 4 X 4 mm QFN package.
Signal Conditioning MBAL-1445 is a high isolation MMIC balun. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions. The MBAL-1445SM is available as a 4 X 4 mm QFN package.
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| MBALH-0R106CSP2 |
Hersteller: Marki Microwave
Signal Conditioning The MBALH-0R106CSP2 is a GaAs passive MMIC 1:1 balun that features excellent 35 dB common mode rejection over a 0.1 to 6 GHz operational bandwidth. It is footprint compatible with the 1:2 MBAL-0R106CSP2, offering flexibility in system
Signal Conditioning The MBALH-0R106CSP2 is a GaAs passive MMIC 1:1 balun that features excellent 35 dB common mode rejection over a 0.1 to 6 GHz operational bandwidth. It is footprint compatible with the 1:2 MBAL-0R106CSP2, offering flexibility in system
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| MBALH-0R520CSP2 |
![]() |
Hersteller: Marki Microwave
Signal Conditioning The MBALH-0R520CSP2 is a GaAs passive MMIC 1:1 balun that features excellent 32 dB common mode rejection over a 0.5 to 20 GHz operational bandwidth. It is footprint compatible with the 1:2 MBAL-0R520CSP2, offering flexibility in system
Signal Conditioning The MBALH-0R520CSP2 is a GaAs passive MMIC 1:1 balun that features excellent 32 dB common mode rejection over a 0.5 to 20 GHz operational bandwidth. It is footprint compatible with the 1:2 MBAL-0R520CSP2, offering flexibility in system
auf Bestellung 1 Stücke:
Lieferzeit 10-14 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 1+ | 392.89 EUR |
| 5+ | 327.39 EUR |
| 10+ | 280.65 EUR |
| 25+ | 255.12 EUR |
| MC10-25110M2 |
Hersteller: Marki Microwave
Signal Conditioning The MC10-25110M2 is a mmWave 25-110 GHz, 10dB directional coupler in our connectorized miniature M2-package enabling operation up to 110 GHz. The coupler features excellent directivity, return loss and coupling accuracy.
Signal Conditioning The MC10-25110M2 is a mmWave 25-110 GHz, 10dB directional coupler in our connectorized miniature M2-package enabling operation up to 110 GHz. The coupler features excellent directivity, return loss and coupling accuracy.
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| MC16-0222SM |
![]() |
Hersteller: Marki Microwave
Signal Conditioning MC16-0222SM is a MMIC 2-22 GHz Directional Coupler. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions. The MC16-0222SM is available as a 4 X 4 mm QFN pac
Signal Conditioning MC16-0222SM is a MMIC 2-22 GHz Directional Coupler. Passive GaAs MMIC technology allows production of smaller constructions that replace larger form factor circuit board constructions. The MC16-0222SM is available as a 4 X 4 mm QFN pac
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| MEQ10-60ABH |
Hersteller: Marki Microwave
Signal Conditioning This equalizer provides 7.8 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 10 dB and a 50-ohm match maintained over the entire operating range.
Signal Conditioning This equalizer provides 7.8 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 10 dB and a 50-ohm match maintained over the entire operating range.
auf Bestellung 1 Stücke:
Lieferzeit 10-14 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 1+ | 1722.07 EUR |
| MEQ4-60ABH |
Hersteller: Marki Microwave
Signal Conditioning This equalizer provides 2.6 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 4 dB and a 50-ohm match maintained over the entire operating range.
Signal Conditioning This equalizer provides 2.6 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 4 dB and a 50-ohm match maintained over the entire operating range.
auf Bestellung 1 Stücke:
Lieferzeit 10-14 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 1+ | 1722.07 EUR |
| MEQ6-45CSP1 |
Hersteller: Marki Microwave
Equalisers A passive MMIC equalizer CSP ideal for compensating for low pass filtering effects in RF/microwave and high speed digital systems. The MEQ6-45CSP1 provides positive slope from DC to 45GHz with a DC attenuation of 6dB.
Equalisers A passive MMIC equalizer CSP ideal for compensating for low pass filtering effects in RF/microwave and high speed digital systems. The MEQ6-45CSP1 provides positive slope from DC to 45GHz with a DC attenuation of 6dB.
Produkt ist nicht verfügbar
Mindestbestellmenge: 25 Stücke
Im Einkaufswagen
Stück im Wert von UAH
| MEQ6-60ABH |
Hersteller: Marki Microwave
Signal Conditioning This equalizer provides 4 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 6 dB and a 50-ohm match maintained over the entire operating range.
Signal Conditioning This equalizer provides 4 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 6 dB and a 50-ohm match maintained over the entire operating range.
auf Bestellung 1 Stücke:
Lieferzeit 10-14 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 1+ | 1722.07 EUR |
| MEQ6-7ASM |
Hersteller: Marki Microwave
Equalisers The MEQ6-7ASM passive MMIC equalizer QFN is an ideal solution for compensating for low pass filtering effects in RF/microwave and high speed digital systems, providing positive slope from DC to 7GHz with DC attenuation options between 3 and 12d
Equalisers The MEQ6-7ASM passive MMIC equalizer QFN is an ideal solution for compensating for low pass filtering effects in RF/microwave and high speed digital systems, providing positive slope from DC to 7GHz with DC attenuation options between 3 and 12d
auf Bestellung 25 Stücke:
Lieferzeit 10-14 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 1+ | 83.97 EUR |
| 5+ | 68.67 EUR |
| 10+ | 58.1 EUR |
| 25+ | 52.82 EUR |
| 100+ | 49.08 EUR |
| MEQ7-20ASM |
Hersteller: Marki Microwave
Equalisers The MEQ7-20ASM passive MMIC equalizer QFN is an ideal solution for compensating for low pass filtering effects in RF/microwave and high speed digital systems, providing positive slope from DC to 20GHz with DC attenuation options between 0 and 1
Equalisers The MEQ7-20ASM passive MMIC equalizer QFN is an ideal solution for compensating for low pass filtering effects in RF/microwave and high speed digital systems, providing positive slope from DC to 20GHz with DC attenuation options between 0 and 1
auf Bestellung 10 Stücke:
Lieferzeit 10-14 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 1+ | 83.97 EUR |
| 5+ | 68.67 EUR |
| 10+ | 58.1 EUR |
| 25+ | 52.82 EUR |
| 100+ | 49.08 EUR |
| MFB-1445SM |
![]() |
Hersteller: Marki Microwave
Signal Conditioning The MFB-1445SM is a passive MMIC bandpass filter. It is an integrated filter that passes Ku-Band frequencies (13.6-15.1 GHz).The MFB-1445SM is available as a 3 X 3 mm QFN package.
Signal Conditioning The MFB-1445SM is a passive MMIC bandpass filter. It is an integrated filter that passes Ku-Band frequencies (13.6-15.1 GHz).The MFB-1445SM is available as a 3 X 3 mm QFN package.
auf Bestellung 30 Stücke:
Lieferzeit 10-14 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 1+ | 208.54 EUR |
| 5+ | 170.63 EUR |
| 10+ | 144.38 EUR |
| 25+ | 131.28 EUR |
| 100+ | 121.89 EUR |
| MFBA-00004BH |
Hersteller: Marki Microwave
Signal Conditioning This bandpass filter is an ideal solution for small form factor, high rejection filtering; featuring a 8.51-12.11 GHz 1 dBc passband, 2.3 dB center frequency insertion loss and 23 dB return loss. Available in a connectorized bullet hou
Signal Conditioning This bandpass filter is an ideal solution for small form factor, high rejection filtering; featuring a 8.51-12.11 GHz 1 dBc passband, 2.3 dB center frequency insertion loss and 23 dB return loss. Available in a connectorized bullet hou
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| MFBA-00004PSM |
Hersteller: Marki Microwave
Signal Conditioning The MFBA-00004PSM family of passive MMIC surface mount bandpass filters are an ideal solution for small form factor, high rejection filtering.The MFBA-00004PSM is available as a 5x5mm plastic QFN.
Signal Conditioning The MFBA-00004PSM family of passive MMIC surface mount bandpass filters are an ideal solution for small form factor, high rejection filtering.The MFBA-00004PSM is available as a 5x5mm plastic QFN.
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| MFBC-00004CSP3 |
Hersteller: Marki Microwave
Signal Conditioning The MFBC-00004CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. MFBC-00004CSP3 features a 15-19.8GHz 1dBc passband and 1.8dB center frequency insertion loss.
Signal Conditioning The MFBC-00004CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. MFBC-00004CSP3 features a 15-19.8GHz 1dBc passband and 1.8dB center frequency insertion loss.
Produkt ist nicht verfügbar
Mindestbestellmenge: 25 Stücke
Im Einkaufswagen
Stück im Wert von UAH
| MFBP-00001PSM |
Hersteller: Marki Microwave
Signal Conditioning The MFBP-00001PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00001PSM is available as a 4x4mm plastic QFN.
Signal Conditioning The MFBP-00001PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00001PSM is available as a 4x4mm plastic QFN.
Produkt ist nicht verfügbar
Mindestbestellmenge: 25 Stücke
Im Einkaufswagen
Stück im Wert von UAH
| MFBP-00002PSM |
Hersteller: Marki Microwave
Signal Conditioning The MFBP-00002PSM family of passive MMIC surface mount bandpass filters are an ideal solution for small form factor, high rejection filtering. The MFBP-00002PSM is available as a 4x4mm plastic QFN.
Signal Conditioning The MFBP-00002PSM family of passive MMIC surface mount bandpass filters are an ideal solution for small form factor, high rejection filtering. The MFBP-00002PSM is available as a 4x4mm plastic QFN.
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| MFBP-00030PSM |
Hersteller: Marki Microwave
Signal Conditioning The MFBP-00030PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00030PSM is available as a 5x5mm plastic QFN.
Signal Conditioning The MFBP-00030PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00030PSM is available as a 5x5mm plastic QFN.
Produkt ist nicht verfügbar
Mindestbestellmenge: 25 Stücke
Im Einkaufswagen
Stück im Wert von UAH
| MFBP-00064CSP3 |
Hersteller: Marki Microwave
Signal Conditioning The MFBP-00064CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering.The MFBP-00064CSP3 is available as a 3.5 mm CSP3.
Signal Conditioning The MFBP-00064CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering.The MFBP-00064CSP3 is available as a 3.5 mm CSP3.
Produkt ist nicht verfügbar
Mindestbestellmenge: 25 Stücke
Im Einkaufswagen
Stück im Wert von UAH
| MFBP-00065CSP3 |
Hersteller: Marki Microwave
Signal Conditioning The MFBP-00065CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00065CSP3 is available as a 3.5 mm CSP3.
Signal Conditioning The MFBP-00065CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00065CSP3 is available as a 3.5 mm CSP3.
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| MFBP-00072CSP3 |
Hersteller: Marki Microwave
Signal Conditioning The MFBP-00072CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00072CSP3 features a 30.8-36.1GHz 1dBc passband and 2.6dB center frequency insertion loss.
Signal Conditioning The MFBP-00072CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00072CSP3 features a 30.8-36.1GHz 1dBc passband and 2.6dB center frequency insertion loss.
Produkt ist nicht verfügbar
Mindestbestellmenge: 25 Stücke
Im Einkaufswagen
Stück im Wert von UAH
| MFBP-00079CSP3 |
Hersteller: Marki Microwave
Signal Conditioning The MFBP-00079CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00079CSP3 is available in our 3.5 x 3.5mm CSP3 chip scale package.
Signal Conditioning The MFBP-00079CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00079CSP3 is available in our 3.5 x 3.5mm CSP3 chip scale package.
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| MFBP-00080CSP3 |
Hersteller: Marki Microwave
Signal Conditioning The MFBP-00080CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00080CSP3 is available in our 3.5 x 3.5mm CSP3 chip scale package.
Signal Conditioning The MFBP-00080CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00080CSP3 is available in our 3.5 x 3.5mm CSP3 chip scale package.
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| MFBP-00082CSP3 |
Hersteller: Marki Microwave
Signal Conditioning The MFBP-00082CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00082CSP3 features a 14-15.9GHz 1dBc passband and 2.7dB center frequency insertion loss.
Signal Conditioning The MFBP-00082CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00082CSP3 features a 14-15.9GHz 1dBc passband and 2.7dB center frequency insertion loss.
Produkt ist nicht verfügbar
Mindestbestellmenge: 25 Stücke
Im Einkaufswagen
Stück im Wert von UAH
| MFBP-00085CSP3 |
Hersteller: Marki Microwave
Signal Conditioning The MFBP-00085CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00085CSP3 features a 9-14.4GHz 1dBc passband and 1.8dB center frequency insertion loss.
Signal Conditioning The MFBP-00085CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00085CSP3 features a 9-14.4GHz 1dBc passband and 1.8dB center frequency insertion loss.
Produkt ist nicht verfügbar
Mindestbestellmenge: 25 Stücke
Im Einkaufswagen
Stück im Wert von UAH
| MFBP-00086CSP3 |
Hersteller: Marki Microwave
Signal Conditioning The MFBP-00086CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00086CSP3 features a 12.7-17.9GHz 1dBc passband and 1.9dB center frequency insertion loss.
Signal Conditioning The MFBP-00086CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00086CSP3 features a 12.7-17.9GHz 1dBc passband and 1.9dB center frequency insertion loss.
Produkt ist nicht verfügbar
Mindestbestellmenge: 25 Stücke
Im Einkaufswagen
Stück im Wert von UAH
| MFBP-00104PSM |
Hersteller: Marki Microwave
Signal Conditioning The MFBP-00104PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering.The MFBP-00104PSM is available as a 6 mm plastic QFN.
Signal Conditioning The MFBP-00104PSM passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering.The MFBP-00104PSM is available as a 6 mm plastic QFN.
Produkt ist nicht verfügbar
Mindestbestellmenge: 25 Stücke
Im Einkaufswagen
Stück im Wert von UAH
| MFBP-00110CSP3 |
Hersteller: Marki Microwave
Signal Conditioning The MFBP-00110CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00110CSP3 features a 6.0-8.4GHz 1dBc passband and 2.5dB center frequency insertion loss.
Signal Conditioning The MFBP-00110CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00110CSP3 features a 6.0-8.4GHz 1dBc passband and 2.5dB center frequency insertion loss.
Produkt ist nicht verfügbar
Mindestbestellmenge: 25 Stücke
Im Einkaufswagen
Stück im Wert von UAH
| MFBP-00118CSP3 |
Hersteller: Marki Microwave
Signal Conditioning The MFBP-00118CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00118CSP3 features a 26.3-39.4GHz 1dBc passband and 1.4dB center frequency insertion loss.
Signal Conditioning The MFBP-00118CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00118CSP3 features a 26.3-39.4GHz 1dBc passband and 1.4dB center frequency insertion loss.
Produkt ist nicht verfügbar
Mindestbestellmenge: 25 Stücke
Im Einkaufswagen
Stück im Wert von UAH
| MFBP-00127CSP3 |
Hersteller: Marki Microwave
Signal Conditioning The MFBP-00127CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00127CSP3 is available in our 3.5 x 3.5mm CSP3 chip scale package.
Signal Conditioning The MFBP-00127CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00127CSP3 is available in our 3.5 x 3.5mm CSP3 chip scale package.
Produkt ist nicht verfügbar
Mindestbestellmenge: 25 Stücke
Im Einkaufswagen
Stück im Wert von UAH
| MFBP-00129CSP3 |
Hersteller: Marki Microwave
Signal Conditioning The MFBP-00129CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00129CSP3 is available in our 3.5 x 3.5mm CSP3 chip scale package.
Signal Conditioning The MFBP-00129CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00129CSP3 is available in our 3.5 x 3.5mm CSP3 chip scale package.
Produkt ist nicht verfügbar
Mindestbestellmenge: 25 Stücke
Im Einkaufswagen
Stück im Wert von UAH
| MFBP-00143CSP3 |
Hersteller: Marki Microwave
Signal Conditioning The MFBP-00143CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00143CSP3 features a 10.7-11.3GHz 1dBc passband and 6.0dB center frequency insertion loss.
Signal Conditioning The MFBP-00143CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00143CSP3 features a 10.7-11.3GHz 1dBc passband and 6.0dB center frequency insertion loss.
Produkt ist nicht verfügbar
Mindestbestellmenge: 25 Stücke
Im Einkaufswagen
Stück im Wert von UAH
| MFBP-00144CSP3 |
Hersteller: Marki Microwave
Signal Conditioning The MFBP-00144CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00144CSP3 features a 6.9-14.7GHz 1dBc passband and 1.6dB center frequency insertion loss.
Signal Conditioning The MFBP-00144CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00144CSP3 features a 6.9-14.7GHz 1dBc passband and 1.6dB center frequency insertion loss.
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| MFBP-00145CSP3 |
Hersteller: Marki Microwave
Signal Conditioning The MFBP-00145CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00145CSP3 features a 3.8-16.7GHz 1dBc passband and 0.9dB center frequency insertion loss.
Signal Conditioning The MFBP-00145CSP3 passive MMIC surface mount bandpass filter is an ideal solution for small form factor, high rejection filtering. The MFBP-00145CSP3 features a 3.8-16.7GHz 1dBc passband and 0.9dB center frequency insertion loss.
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| MFHP-00001BH |
Hersteller: Marki Microwave
Signal Conditioning The MFHP-00001BH MMIC highpass filter is an ideal solution for small form factor, high rejection filtering. The MFHP-00001BH features a 1.9 GHz 3 dBc cutoff frequency and 16 dB passband return loss. Available in a connectorized bullet
Signal Conditioning The MFHP-00001BH MMIC highpass filter is an ideal solution for small form factor, high rejection filtering. The MFHP-00001BH features a 1.9 GHz 3 dBc cutoff frequency and 16 dB passband return loss. Available in a connectorized bullet
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| MFHP-00001PSM |
Hersteller: Marki Microwave
Signal Conditioning The MFHP-00001PSM family of passive MMIC surface mount highpass filters are an ideal solution for small form factor, high rejection filtering. The MFHP-00001PSM is available as a 4x4mm plastic QFN.
Signal Conditioning The MFHP-00001PSM family of passive MMIC surface mount highpass filters are an ideal solution for small form factor, high rejection filtering. The MFHP-00001PSM is available as a 4x4mm plastic QFN.
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| MFLP-00001PSM |
Hersteller: Marki Microwave
Signal Conditioning The MFLP-00001PSM is a passive MMIC surface mount 6.1 GHz lowpass filter that is an ideal solution for small form factor, high rejection filtering. The MFLP-00001PSM is available as a 4x4mm plastic QFN.
Signal Conditioning The MFLP-00001PSM is a passive MMIC surface mount 6.1 GHz lowpass filter that is an ideal solution for small form factor, high rejection filtering. The MFLP-00001PSM is available as a 4x4mm plastic QFN.
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| MFLP-00010PSM |
Hersteller: Marki Microwave
Signal Conditioning The MFLP-00010PSM is a passive MMIC surface mount 4.5 GHz lowpass filter that is an ideal solution for small form factor, high rejection filtering.The MFLP-00010PSM is available as a 5x5mm plastic QFN.
Signal Conditioning The MFLP-00010PSM is a passive MMIC surface mount 4.5 GHz lowpass filter that is an ideal solution for small form factor, high rejection filtering.The MFLP-00010PSM is available as a 5x5mm plastic QFN.
Produkt ist nicht verfügbar
Mindestbestellmenge: 25 Stücke
Im Einkaufswagen
Stück im Wert von UAH
| MFLP-00022CSP1 |
Hersteller: Marki Microwave
Signal Conditioning The MFLP-00022CSP1 MMIC surface mount lowpass filter is an ideal solution for extremely small form factor, high rejection filtering. The MFLP-00022CSP1 features a 2.1 GHz 3 dBc cutoff and 27 dB passband return loss.
Signal Conditioning The MFLP-00022CSP1 MMIC surface mount lowpass filter is an ideal solution for extremely small form factor, high rejection filtering. The MFLP-00022CSP1 features a 2.1 GHz 3 dBc cutoff and 27 dB passband return loss.
Produkt ist nicht verfügbar
Mindestbestellmenge: 25 Stücke
Im Einkaufswagen
Stück im Wert von UAH
| MFLP-00024CSP1 |
Hersteller: Marki Microwave
Signal Conditioning The MFLP-00024CSP1 MMIC surface mount lowpass filter is an ideal solution for extremely small form factor, high rejection filtering. The MFLP-00024CSP1 features a 4.5 GHz 3 dBc cutoff and 31 dB passband return loss.
Signal Conditioning The MFLP-00024CSP1 MMIC surface mount lowpass filter is an ideal solution for extremely small form factor, high rejection filtering. The MFLP-00024CSP1 features a 4.5 GHz 3 dBc cutoff and 31 dB passband return loss.
Produkt ist nicht verfügbar
Mindestbestellmenge: 25 Stücke
Im Einkaufswagen
Stück im Wert von UAH
| MFLP-00025CSP1 |
Hersteller: Marki Microwave
Signal Conditioning The MFLP-00025CSP1 MMIC surface mount lowpass filter is an ideal solution for extremely small form factor, high rejection filtering. The MFLP-00025CSP1 features a 4.8 GHz 3 dBc cutoff and 27 dB passband return loss.
Signal Conditioning The MFLP-00025CSP1 MMIC surface mount lowpass filter is an ideal solution for extremely small form factor, high rejection filtering. The MFLP-00025CSP1 features a 4.8 GHz 3 dBc cutoff and 27 dB passband return loss.
Produkt ist nicht verfügbar
Mindestbestellmenge: 25 Stücke
Im Einkaufswagen
Stück im Wert von UAH





























































