auf Bestellung 18 Stücke:
Lieferzeit 10-14 Tag (e)
| Anzahl | Preis |
|---|---|
| 1+ | 295.56 EUR |
| 5+ | 275.65 EUR |
| 10+ | 266.8 EUR |
| 25+ | 266.55 EUR |
Produktrezensionen
Produktbewertung abgeben
Technische Details 9012500000 Weidmuller
Category: Crimping Tools for Terminals, Description: Tool: for crimping; insulated solder sleeves; 0.5÷4mm2; 200mm, Type of tool: for crimping, Crimp tool application: insulated solder sleeves; non-insulated solder sleeves, Wire cross-section: 0.5...4mm2, Die shape: trapeze, Crimp tool features: blackened tool; ergonomic pads on handles; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle, Tool material: steel, Tool length: 200mm.
Weitere Produktangebote 9012500000 nach Preis ab 253.14 EUR bis 508.95 EUR
| Foto | Bezeichnung | Hersteller | Beschreibung |
Verfügbarkeit |
Preis | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
 |
9012500000 | Hersteller : Weidmüller |
 Description: TOOL HAND CRIMPER 12-20AWG SIDEPackaging: Bulk For Use With/Related Products: Ferrules Tool Type: Hand Crimper Wire Gauge or Range - AWG: 12-20 AWG Part Status: Active Tool Method: Manual Ratcheting: Ratchet Wire Entry Location: Side Entry |
auf Bestellung 22 Stücke: Lieferzeit 10-14 Tag (e) |
|
||||||||||
 |
9012500000 | Hersteller : Weidmuller |
Crimping Tool For Wire End Ferrules, Crimping Range 0.5 4mm Square , Trapeze Crimp |
auf Bestellung 26 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||||||
|
|
9012500000 | Hersteller : Weidmuller |
Crimping Tool For Wire End Ferrules, Crimping Range 0.5 4mm Square , Trapeze Crimp |
auf Bestellung 1 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||||||
| 9012500000 | Hersteller : WEIDMЬLLER |
WDM-PZ4 Crimping Tools for Terminals |
auf Bestellung 2 Stücke: Lieferzeit 7-14 Tag (e) |
|
|||||||||||
 |
9012500000 | Hersteller : Weidmuller |
Crimping Tool For Wire End Ferrules, Crimping Range 0.5 4mm Square , Trapeze Crimp |
Produkt ist nicht verfügbar |
|||||||||||
 +4 |
9012500000 | Hersteller : WEIDMÜLLER |
Category: Crimping Tools for Terminals Description: Tool: for crimping; insulated solder sleeves; 0.5÷4mm2; 200mm Type of tool: for crimping Crimp tool application: insulated solder sleeves; non-insulated solder sleeves Wire cross-section: 0.5...4mm2 Die shape: trapeze Crimp tool features: blackened tool; ergonomic pads on handles; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle Tool material: steel Tool length: 200mm |
Produkt ist nicht verfügbar |