| Foto | Bezeichnung | Hersteller | Beschreibung |
Verfügbarkeit |
Preis |
||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 5 INCH 5D LENS | NEWBRAND | LAMP-LENS-5D-5IN Desktop Magnifiers with Backlight |
auf Bestellung 21 Stücke: Lieferzeit 7-14 Tag (e) |
|
|||||||||||
 |
Lupenlampe LAMP-5D-LEDN1 Produktcode: 60994
zu Favoriten hinzufügen
Lieblingsprodukt
|
Newbrand |
 Werkzeuge und Geräte > Mikroskope, Binokulare, Lupen, LupenleuchtenGruppe: Linsen, Lupe Beschreibung: Lupe hinterleuchtet; Vergroßerung 5 dpt (x2.25);Lange Stand 900mm Збільшення: x2,25 Lupenlampe LAMP-5D-LEDN1 |
Produkt ist nicht verfügbar
|
|
||||||||||
| LAMP-5D-LEDN1B | NEWBRAND | LAMP-5D-LEDN1B Desktop Magnifiers with Backlight |
auf Bestellung 200 Stücke: Lieferzeit 7-14 Tag (e) |
|
|||||||||||
| LAMP-STAND | NEWBRAND | LAMP-STAND Desktop Magnifiers with Backlight |
auf Bestellung 47 Stücke: Lieferzeit 7-14 Tag (e) |
|
|||||||||||
| LUP-19-LED-N | NEWBRAND | LUP-19-LED-N Desktop Magnifiers with Backlight |
auf Bestellung 221 Stücke: Lieferzeit 7-14 Tag (e) |
|
|||||||||||
| LUP-19-LED-N1 | NEWBRAND | LUP-19-LED-N1 Desktop Magnifiers with Backlight |
auf Bestellung 240 Stücke: Lieferzeit 7-14 Tag (e) |
|
|||||||||||
| LUP-20-LED-SMD | NEWBRAND | LUP-20-LED-SMD Desktop Magnifiers with Backlight |
auf Bestellung 180 Stücke: Lieferzeit 7-14 Tag (e) |
|
|||||||||||
 |
Набор, ножи для радиолюбителей NB-KNIFE-SET Produktcode: 118004
zu Favoriten hinzufügen
Lieblingsprodukt
|
Newbrand |
Werkzeuge > Messer, Skalpelle, Klingen Тип: Ножі Опис: Набір, ножі для радіолюбителів, 16штук, 13 змінних лез, 3 рукоятки різної форми для швидкого обтиску лез, кейс, призначені для широкого застосування, наприклад, формування пластмас, різання м'яких матеріалів, коригування паяних з' єднань |
Produkt ist nicht verfügbar
|
Im Einkaufswagen Stück im Wert von UAH | ||||||||||
 |
Набор, ножи для радиолюбителей SKALPEL-SET Produktcode: 118015
zu Favoriten hinzufügen
Lieblingsprodukt
|
Newbrand |
Werkzeuge > Messer, Skalpelle, Klingen Тип: Ножі Опис: Ножі для радіолюбителів, в наборі - дві рукоятки різної форми, на які за допомогою обтиску швидко кріпляться змінні леза, а також допоміжний пінцет, змінні леза різного призначення закріплені в футлярі за допомогою магнітних пластин, набір поставляється в пластмасовому футлярі, що імітує дерев'яний ящик. |
Produkt ist nicht verfügbar
|
Im Einkaufswagen Stück im Wert von UAH | ||||||||||
 +4 |
NB-028B | NEWBRAND |
Category: Strippers for wire & cable Description: Multifunction wire stripper and crimp tool; 30AWG÷8AWG; 210mm Kind of stripping wire: flat; round Type of tool: multifunction wire stripper and crimp tool Crimp tool application: insulated connectors 0,5 - 6mm2; non-insulated terminals Stripping tool features: rubber grips to better comfort; self adjusting to wire diameter; strip length adjustment ensures length repeatabillity Wire cross-section: 0.05...10mm2 Length: 210mm Wire size: 30AWG...8AWG Used for wire stripping: cutting wires with a cross section 0,05 - 10mm2; insulation stripping from round cables 0.25 - 10mm2 (24AWG - 8AWG), with additional adjustment knob which extends the range to 0.05mm2 (30AWG) |
auf Bestellung 52 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||||||
 +3 |
NB-03SET -AS | NEWBRAND |
Category: Screwdrivers Sets Description: Screwdriver: universal-set; Phillips,slot; plastic box; 8pcs. Kind of bit: Phillips; slot Kind of package: plastic box Type of screwdriver: universal - set Screwdrivers size (tip size | shank len. | overall len.): 0.1x5.5mm (38mm); 0.8x4mm (75mm); PH1 (75mm); PH1 (150mm); 1.2x6.5mm (125mm); 1.2x8mm (150mm); PH2 (38mm); PH2 (100mm) Quantity in set/package: 8pcs. Tool set features: black finished blade tip; ergonomic handle |
auf Bestellung 18 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||||||
 +3 |
NB-04SET | NEWBRAND |
Category: Screwdrivers Sets Description: Screwdriver: insulated-set; insulated; Phillips,slot; 1kVAC Type of screwdriver: insulated - set Kind of screwdriver: insulated Kind of bit: Phillips; slot Bit size: PH0; PH1; PH2; 3x0.5mm; 4x0.8mm; 5.5x1mm; 6.5x1.2mm Conform to the norm: VDE Max. operating voltage: 1kV AC Kind of package: plastic box Quantity in set/package: 8pcs. Tools application: for electricians; suitable for electrical, under voltage works Tool set features: black finished blade tip; ergonomic handle; voltage indicator included |
auf Bestellung 23 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||||||
 +4 |
NB-336 | NEWBRAND |
Category: Crimping Tools for Terminals Description: Tool: for crimping; insulated connectors,insulated terminals Type of tool: for crimping Wire size: 20AWG...10AWG Crimp tool features: a ratched mechanism serves also as a handle lock; blackened tool; ergonomic bicomponent pads on handles; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle Tool length: 220mm Wire cross-section: 0.5...6mm2 Crimp tool application: insulated connectors; insulated terminals Tool material: carbon steel |
auf Bestellung 122 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||||||
 +4 |
NB-8160-02 | NEWBRAND |
Category: Crimping Tools for Terminals Description: Tool: for crimping; non-insulated terminals; 0.25÷2.5mm2 Type of tool: for crimping Wire cross-section: 0.25...2.5mm2 Length: 190mm Crimp tool features: blackened tool; ergonomic pads on handles; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle Wire size: 24AWG...14AWG Crimp tool application: non-insulated terminals; non-insulated terminals Related items: 342900; N42G-T1; N42W-T1; NLSW-T; NS39-T; NSLG-T |
auf Bestellung 46 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||||||
 +4 |
NB-8160-04 | NEWBRAND |
Category: Crimping Tools for Terminals Description: Tool: for crimping; terminals D-Sub connectors Type of tool: for crimping Related items: 2673.05.00.9; FCI-76357-301; NDR-T; NS25-T; NX2501-TF; TAMIYA-FT2; TAMIYA-MT2 Wire size: 22AWG...18AWG; 30AWG...24AWG Crimp tool features: blackened tool; ergonomic pads on handles; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle Wire cross-section: 0.05...0.25mm2; 0.35...0.9mm2 Length: 190mm Crimp tool application: terminals D-Sub connectors |
auf Bestellung 88 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||||||
 +4 |
NB-8160-06 | NEWBRAND |
Category: Crimping Tools for Terminals Description: Tool: for crimping; insulated solder sleeves; 0.5÷4mm2 Type of tool: for crimping Crimp tool application: insulated solder sleeves; non-insulated solder sleeves Wire cross-section: 0.5...4mm2 Wire size: 22AWG...12AWG Length: 190mm Crimp tool features: blackened tool; ergonomic pads on handles; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle |
auf Bestellung 29 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||||||
 |
NB-8163-04 | NEWBRAND |
Category: Crimping Tools for Coaxial/RF Connectors Description: Tool: for crimping; BNC connectors,TNC connectors; 255mm Kind of wire: RG58; RG59; RG62 Type of tool: for crimping Die dimensions: 1.73mm; 5.41mm; 6.48mm Length: 255mm Crimp tool features: blackened tool; elongated handles enable operation with both hands; ergonomic pads on handles; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle Crimp tool application: BNC connectors; TNC connectors |
auf Bestellung 11 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||||||
 +2 |
NB-CRIMP-SEAL01 | NEWBRAND |
Category: Crimping Tools - Others Description: Tool: for crimping; Superseal 1.5 terminal; 210mm; Superseal 1.5 Type of tool: for crimping Wire size: 16AWG; 17AWG; 18AWG; 22AWG...20AWG Tool length: 210mm Handle material: plastic Wire cross-section: 0.35...0.5mm2; 0.75mm2; 1mm2; 1.5mm2 Application - series/manufacturer: Superseal 1.5 Crimp tool application: Superseal 1.5 terminal Tool material: steel |
auf Bestellung 67 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||||||
 |
NB-CRIMP-TEST02 | NEWBRAND |
Category: Crimping Tools - Others Description: Tools set: for crimping push-on connectors, terminal crimping Kind of package: case Kit contents: crimping jaws for crimping non-insulated connectors on wires with section: 1.5; 2.5; 6; 10mm2; (1 pc.); crimping jaws for crimping non-insulated connectors on wires with section: 0.5-1mm2 (20AWG - 18AWG); 1.5-2.5mm2 (16AWG - 14AWG); 4-6mm2 (12AWG - 10AWG); (1pc.); crimp tool; flat female connectors, non-insulated; (170 pcs.); flat male connectors, non-insulated; (170 pcs.); flat male connectors, non-insulated - splitters; (40 pcs.); fork terminals, non-insulated; (140 pcs.); insulating sheets for flat connectors; (60 pcs.); insulating sheets for round female connectors; (50 pcs.); insulating sheets for round male connectors; (30 pcs.); non-insulated butt splices; (180 pcs.); ring terminals, non-insulated; (330 pcs.); round female connectors, non-insulated; (70 pcs.); round male connectors, non-insulated; (70 pcs.) Type of tools set: for crimping push-on connectors, terminal crimping Bag material: plastic Package dimensions: 370x280x70mm Quantity in set/package: 1313pcs. |
auf Bestellung 8 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||||||
 |
NB-CRIMP-TSET01 | NEWBRAND |
Category: Crimping Tools - Others Description: Tools set: for crimping push-on connectors, terminal crimping Quantity in set/package: 1000pcs. Kind of package: case Kit contents: crimping jaws for crimping connector and insulated terminals on wires with section 0.5-6mm2;(22AWG - 10AWG); (1 pc.); crimping jaws for crimping non-insulated connectors on wires with section: 1.5; 2.5; 6; 10mm2; (1 pc.); crimp tool; flat female connectors, insulated; (30 pcs.); flat female connectors, non-insulated; (70 pcs.); flat male connectors, insulated; (60 pcs.); flat male connectors, non-insulated; (40 pcs.); fork terminals, insulated; (140 pcs.); fork terminals, non-insulated; (80 pcs.); insulated butt splices; (100 pcs.); non-insulated butt splices; (57 pcs.); ring terminals, insulated; (270 pcs.); ring terminals, non-insulated; (150 pcs.) Type of tools set: for crimping push-on connectors, terminal crimping Bag material: plastic Package dimensions: 370x280x70mm |
auf Bestellung 50 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||||||
 |
NB-CRIMP01H | NEWBRAND |
Category: Crimping Tools - Others Description: Tool: for crimping; without crimping dies Type of tool: for crimping Related items: NB-JCRIMP10; NB-JCRIMP11; NB-JCRIMP12; NB-JCRIMP13; NB-JCRIMP14; NB-JCRIMP15; NB-JCRIMP16; NB-JCRIMP17; NB-JCRIMP18; NB-JCRIMP19; NB-JCRIMP20; NB-JCRIMP21; NB-JCRIMP01; NB-JCRIMP02; NB-JCRIMP03; NB-JCRIMP04; NB-JCRIMP05; NB-JCRIMP06; NB-JCRIMP07; NB-JCRIMP08; NB-JCRIMP09 Crimp tool features: blackened tool; ergonomic bicomponent pads on handles; jaws can be easily changed; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle Version: without crimping dies Crimp tool length: 220mm Tool material: steel |
auf Bestellung 23 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||||||
 |
NB-CRIMPSET05 | NEWBRAND |
Category: Crimping Tools - Others Description: Blister; Application: BNC connectors,TNC connectors; 220mm Crimp tool application: BNC connectors; TNC connectors Kind of wire: RG6; RG58; RG59; RG62 Kit contents: crimp tool; interchangeable dies (5 pcs.) Type of tools set: for crimping push-on connectors, terminal crimping and HF connector Crimp tool length: 220mm Wire cross section: 0,5...6mm2 (insulated connectors); 0,5...6mm2 (insulated terminals); 0,5...6mm2 (non-insulated terminals); 0,5; 0,75; 1; 1,5; 2,5; 4mm2 (insulated solder sleeves); 1,5...2,5mm2 (non-insulated terminals); 1,5; 2,5; 6; 10mm2 (non-insulated terminals); 4...6mm2 (non-insulated terminals) Crimp tool features: blackened tool; ergonomic bicomponent pads on handles; jaws can be easily changed; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle; tool is made of steel Kind of package: blister |
auf Bestellung 77 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||||||
 +4 |
NB-CY-08 | NEWBRAND |
Category: Crimping Tools for Terminals Description: Tool: for crimping; insulated solder sleeves; 0.2÷6mm2 Type of tool: for crimping Crimp tool features: a special head mechanism crimps a die symmetrically; ergonomic, anti-slip pads made of two-component plastic on the handles; self-adjusting mechanism adapts the die shape to the size of crimped cable ferrule Die shape: square Wire cross-section: 0.2...6mm2 Length: 175mm Crimp tool application: insulated solder sleeves; non-insulated solder sleeves Tool material: steel |
auf Bestellung 47 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||||||
 +4 |
NB-CY-08B | NEWBRAND |
Category: Crimping Tools for Terminals Description: Tool: for crimping; insulated solder sleeves; 0.2÷8mm2 Type of tool: for crimping Crimp tool features: a special head mechanism crimps a die symmetrically; ergonomic, anti-slip pads made of two-component plastic on the handles; self-adjusting mechanism adapts the die shape to the size of crimped cable ferrule Die shape: square Wire cross-section: 0.2...8mm2 Length: 175mm Crimp tool application: insulated solder sleeves; non-insulated solder sleeves Tool material: steel |
auf Bestellung 93 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||||||
 |
NB-DSIP-01 | NEWBRAND |
Category: Handles, Stands Description: IPad holder; black; 3kg; Size: 240-252 x 186-196 x 8-14mm; 12.5" Colour: black Tools features: iPad can be tilted and rotated; non-slip pads Type of tool: iPad holder Screen size: 12.5" Force: 3kg Size: 240-252 x 186-196 x 8-14mm |
auf Bestellung 62 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||||||
 |
NB-JCRIMP02 | NEWBRAND |
Category: Crimping Tools - Others Description: Crimping jaws; non-insulated terminals; 8AWG,10AWG,14AWG,16AWG Crimp tool application: non-insulated terminals Tool material: steel Type of spare part: crimping jaws Wire cross-section: 1.5mm2; 2.5mm2; 6mm2; 10mm2 Wire size: 8AWG; 10AWG; 14AWG; 16AWG Related items: NB-CRIMP01H |
auf Bestellung 62 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||||||
 |
NB-JCRIMP05 | NEWBRAND |
Category: Crimping Tools - Others Description: Crimping jaws; BNC connectors,TNC connectors Type of spare part: crimping jaws Crimp tool application: BNC connectors; TNC connectors Related items: NB-CRIMP01H Tool material: steel Kind of wire: RG6; RG58; RG59; RG62 |
auf Bestellung 61 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||||||
 |
NB-JCRIMP06 | NEWBRAND |
Category: Crimping Tools - Others Description: Crimping jaws; 6AWG,8AWG,10AWG; 6mm2,10mm2,16mm2 Crimp tool application: insulated solder sleeves; non-insulated solder sleeves Tool material: steel Wire size: 6AWG; 8AWG; 10AWG Wire cross-section: 6mm2; 0.1cm2; 16mm2 Related items: NB-CRIMP01H Type of crimping tool accessories: crimping jaws |
auf Bestellung 48 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||||||
 |
NB-JCRIMP16 | NEWBRAND |
Category: Crimping Tools - Others Description: Crimping jaws; Deutsch terminal; 16AWG,18AWG,20AWG; DT Type of spare part: crimping jaws Crimp tool application: Deutsch terminal Related items: NB-CRIMP01H Tool material: steel Wire size: 16AWG; 18AWG; 20AWG Application - series/manufacturer: DT |
auf Bestellung 108 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||||||
 |
NB-JCRIMP20 | NEWBRAND |
Category: Crimping Tools - Others Description: Crimping jaws; insulated terminals,closed end connector Type of spare part: crimping jaws Related items: NB-CRIMP01H Tool material: steel Wire cross-section: 0.5...1.5mm2; 1.5...2.5mm2; 4...6mm2 Wire size: 12AWG...10AWG; 16AWG...14AWG; 22AWG...16AWG Crimp tool application: closed end connector; insulated terminals |
auf Bestellung 15 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||||||
 |
NB-JCRIMP21 | NEWBRAND |
Category: Crimping Tools - Others Description: Crimping jaws; solar connectors type SOLCON4; 2.5mm2,4mm2,6mm2 Type of spare part: crimping jaws Related items: NB-CRIMP01H Application: photovoltaics Tool material: steel Wire cross-section: 2.5mm2; 4mm2; 6mm2 Wire size: 10AWG; 12AWG; 14AWG Crimp tool application: solar connectors type SOLCON4 |
auf Bestellung 66 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||||||
 |
NB-KEYISO-S01 | NEWBRAND |
Category: Wrenches Sets Description: Wrench-set; insulated,socket spanner; 1kVAC; 16pcs. Key features: a rachet handle with a reversal lever is fitted with a bi-component, ergonomic grip Kind of package: case Type of tool: wrench - set Conform to the norm: IEC 60900:2004 Socket size: 4mm; 5mm; 6mm; 8mm; HEX 8mm; HEX 10mm; HEX 12mm; HEX 13mm; HEX 14mm; HEX 17mm; HEX 19mm; HEX 22mm Quantity in set/package: 16pcs. Max. operating voltage: 1kV AC Kit contents: 3/8" 165mm long extension shaft; 3/8" 265mm long extension shaft; 3/8" fixture with ratchet; 6-angles sockets 3/8"; grip 3/8" type T lenght 221mm Kind of wrench: insulated; socket spanner |
auf Bestellung 11 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||||||
 +3 |
NB-PCUT01 | NEWBRAND |
Category: Cutting Pliers Description: Pliers; cutting,for wire stripping; 170mm; 0.5÷6mm2 Tool material: SK5 steel Wire cross-section: 0.5...6mm2 Pliers length: 170mm Cutting range: copper cable Ø12mm max Kind of pliers: cutting; for wire stripping Oblique pliers/knives features: ergonomic two-component handles; opening lock; oval head Type of tool: pliers |
auf Bestellung 82 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||||||
 +1 |
NB-SC02 | NEWBRAND |
Category: Screwdrivers Sets Description: Screwdriver: precision-set; precision; Phillips,slot; 7pcs. Type of screwdriver: precision - set Kind of screwdriver: precision Kind of bit: Phillips; slot Kind of package: plastic box Quantity in set/package: 7pcs. Screwdriver features: anti-slip handle; black finished blade tip; ergonomic handle with rotating cap at the end; precision screwdrivers - rotary cap Screwdrivers size (tip size | shank len. | overall len.): PH00 (50mm); PH0 (50mm); 0.4x1.4mm (50mm); 0.4x2mm (50mm); 0.4x2.5mm (50mm); 0.5x3mm (50mm); PH1 (50mm) |
auf Bestellung 1065 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||||||
 |
NB-STRIP01 | NEWBRAND |
Category: Strippers for wire & cable Description: Stripping tool; Wire: coaxial,round,flat; 125mm Type of tool: stripping tool Kind of wire: RG6; RG7; RG11; RG59; UTP/STP Tool material: plastic Kind of stripping wire: coaxial; flat; round Length: 125mm Stripping tool features: adjustment knob enables to set cut depth; flat cable stripping is made by blades which operate after pressing the tool lever; insulation is cut after the tool rotates several times around the cable axis; insulation is stripped from circular cables by putting through the stripper self-tightening ring |
auf Bestellung 5 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||||||
 |
NB-STRIP05 | NEWBRAND |
Category: Strippers for wire & cable Description: Stripping tool; 0.5÷5.5mm2; Wire: round,flat; 170mm Type of tool: stripping tool Wire cross-section: 0.5...5.5mm2 Kind of stripping wire: flat; round Stripping tool features: additionally fitted with cable cutter; adjustable jaws pressing force; max width stripping wire: 12mm Strip length: 2...20mm Length: 170mm |
auf Bestellung 83 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||||||
 |
NB-STRIP06 | NEWBRAND |
Category: Strippers for wire & cable Description: Stripping tool; 0.2÷6mm2; Wire: round,multi-core Type of tool: stripping tool Wire cross-section: 0.2...6mm2 Kind of stripping wire: multi-core; round Stripping tool features: block; ergonomic shape ensures convenient and safe operation; fiberglass reinforced construction; fitted with cutter for max 2,0mm diameter wires; for operation in hard to reach places; self adjusting to wire diameter Strip length: 8...12mm |
auf Bestellung 342 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||||||
 |
NB-STRIP08 | NEWBRAND |
Category: Strippers for wire & cable Description: Stripping tool; 20AWG÷10AWG; 0.8÷2.6mm2; Wire: round; 165mm Type of tool: stripping tool Wire cross-section: 0.8...2.6mm2 Kind of stripping wire: round Stripping tool features: block; burnished; fitted with demountable return spring; marked with symbols defining the function of each die and jaw; the handles are fitted with ergonomic plastic pads Used for wire stripping: copper wire cutting; gripping and forming copper wires; insulation stripping Tool material: SK5 steel Tool length: 165mm Wire size: 20AWG...10AWG |
auf Bestellung 90 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||||||
 |
NB-STRIP09 | NEWBRAND |
Category: Strippers for wire & cable Description: Stripping tool; 8AWG÷4AWG; 10÷25mm2; Wire: round; 165mm Type of tool: stripping tool Wire cross-section: 10...25mm2 Kind of stripping wire: round Stripping tool features: block; burnished; fitted with demountable return spring; marked with symbols defining the function of each die and jaw; the handles are fitted with ergonomic plastic pads Used for wire stripping: copper wire cutting; gripping and forming copper wires; insulation stripping Tool material: steel Tool length: 165mm Wire size: 8AWG...4AWG |
auf Bestellung 191 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||||||
| NB-028 | NEWBRAND | NB-028 Strippers for wire & cable |
auf Bestellung 436 Stücke: Lieferzeit 7-14 Tag (e) |
|
|||||||||||
|
+4 |
NB-028B | NEWBRAND |
Category: Strippers for wire & cable Description: Multifunction wire stripper and crimp tool; 30AWG÷8AWG; 210mm Kind of stripping wire: flat; round Type of tool: multifunction wire stripper and crimp tool Crimp tool application: insulated connectors 0,5 - 6mm2; non-insulated terminals Stripping tool features: rubber grips to better comfort; self adjusting to wire diameter; strip length adjustment ensures length repeatabillity Wire cross-section: 0.05...10mm2 Length: 210mm Wire size: 30AWG...8AWG Used for wire stripping: cutting wires with a cross section 0,05 - 10mm2; insulation stripping from round cables 0.25 - 10mm2 (24AWG - 8AWG), with additional adjustment knob which extends the range to 0.05mm2 (30AWG) Anzahl je Verpackung: 1 Stücke |
auf Bestellung 52 Stücke: Lieferzeit 7-14 Tag (e) |
|
||||||||||
| NB-028/S | NEWBRAND | NB-028/S Strippers for wire & cable |
auf Bestellung 98 Stücke: Lieferzeit 7-14 Tag (e) |
|
|||||||||||
|
+3 |
NB-03SET -AS | NEWBRAND |
Category: Screwdrivers Sets Description: Screwdriver: universal-set; Phillips,slot; plastic box; 8pcs. Kind of bit: Phillips; slot Kind of package: plastic box Type of screwdriver: universal - set Screwdrivers size (tip size | shank len. | overall len.): 0.1x5.5mm (38mm); 0.8x4mm (75mm); PH1 (75mm); PH1 (150mm); 1.2x6.5mm (125mm); 1.2x8mm (150mm); PH2 (38mm); PH2 (100mm) Quantity in set/package: 8pcs. Tool set features: black finished blade tip; ergonomic handle Anzahl je Verpackung: 1 Stücke |
auf Bestellung 18 Stücke: Lieferzeit 7-14 Tag (e) |
|
||||||||||
|
+3 |
NB-04SET | NEWBRAND |
Category: Screwdrivers Sets Description: Screwdriver: insulated-set; insulated; Phillips,slot; 1kVAC Type of screwdriver: insulated - set Kind of screwdriver: insulated Kind of bit: Phillips; slot Bit size: PH0; PH1; PH2; 3x0.5mm; 4x0.8mm; 5.5x1mm; 6.5x1.2mm Conform to the norm: VDE Max. operating voltage: 1kV AC Kind of package: plastic box Quantity in set/package: 8pcs. Tools application: for electricians; suitable for electrical, under voltage works Tool set features: black finished blade tip; ergonomic handle; voltage indicator included Anzahl je Verpackung: 1 Stücke |
auf Bestellung 23 Stücke: Lieferzeit 7-14 Tag (e) |
|
||||||||||
| NB-05SET | NEWBRAND | NB-05SET Tool Sets |
auf Bestellung 272 Stücke: Lieferzeit 7-14 Tag (e) |
|
|||||||||||
 |
NB-2001C Produktcode: 108453
zu Favoriten hinzufügen
Lieblingsprodukt
|
Newbrand |
Werkzeuge > Zangen, Seitenschneider, Flachzangen, Kneifzangen Тип: Seiteschneider Опис: Fuers Schneiden, Abgerundete Kanten |
Produkt ist nicht verfügbar
|
Im Einkaufswagen Stück im Wert von UAH | ||||||||||
 |
NB-208K Extraktion von Lötmittel mit Teflon Spitze Produktcode: 35852
zu Favoriten hinzufügen
Lieblingsprodukt
|
Newbrand |
Lötgeräte, Lötmaterial > Löttechnik. Verschiedenes Kategorie: Extraktion von Lötmittel Beschreibung: Extraktion von Lötmittel mit hitzebeständiger Teflon Spitze |
Produkt ist nicht verfügbar
|
|
||||||||||
 |
NB-208T Spitze Teflon zur Extraktion von Lötmittel NB-208K Produktcode: 35853
zu Favoriten hinzufügen
Lieblingsprodukt
|
Newbrand |
Lötgeräte, Lötmaterial > Löttechnik. Verschiedenes Kategorie: Extraktion von Lötmittel Beschreibung: Spitze Teflon zur Extraktion von Lötmittel NB-208K |
Produkt ist nicht verfügbar
|
|
||||||||||
| NB-3001 | NEWBRAND | NB-3001 Cutting Pliers |
auf Bestellung 85 Stücke: Lieferzeit 7-14 Tag (e) |
|
|||||||||||
|
+4 |
NB-336 | NEWBRAND |
Category: Crimping Tools for Terminals Description: Tool: for crimping; insulated connectors,insulated terminals Type of tool: for crimping Wire size: 20AWG...10AWG Crimp tool features: a ratched mechanism serves also as a handle lock; blackened tool; ergonomic bicomponent pads on handles; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle Tool length: 220mm Wire cross-section: 0.5...6mm2 Crimp tool application: insulated connectors; insulated terminals Tool material: carbon steel Anzahl je Verpackung: 1 Stücke |
auf Bestellung 122 Stücke: Lieferzeit 7-14 Tag (e) |
|
||||||||||
| NB-45-1-B | NEWBRAND | NB-45-1-B Tool bags and cases |
auf Bestellung 15 Stücke: Lieferzeit 7-14 Tag (e) |
|
|||||||||||
| NB-45-27 | NEWBRAND | NB-45-27 Tool bags and cases |
auf Bestellung 15 Stücke: Lieferzeit 7-14 Tag (e) |
|
|||||||||||
| NB-45-28 | NEWBRAND | NB-45-28 Tool bags and cases |
auf Bestellung 1 Stücke: Lieferzeit 7-14 Tag (e) |
|
|||||||||||
| NB-45-29 | NEWBRAND | NB-45-29 Tool bags and cases |
auf Bestellung 20 Stücke: Lieferzeit 7-14 Tag (e) |
|
|||||||||||
| NB-45-2-B | NEWBRAND | NB-45-2-B Tool bags and cases |
auf Bestellung 16 Stücke: Lieferzeit 7-14 Tag (e) |
|
|||||||||||
| NB-45-3 | NEWBRAND | NB-45-3 Tool bags and cases |
auf Bestellung 1 Stücke: Lieferzeit 7-14 Tag (e) |
|
|||||||||||
| NB-45-30 | NEWBRAND | NB-45-30 Tool bags and cases |
auf Bestellung 4 Stücke: Lieferzeit 7-14 Tag (e) |
|
|||||||||||
| NB-45-6-B | NEWBRAND | NB-45-6-B Tool bags and cases |
auf Bestellung 3 Stücke: Lieferzeit 7-14 Tag (e) |
|
|||||||||||
| NB-46-1510 | NEWBRAND | NB-46-1510 Tool bags and cases |
auf Bestellung 2 Stücke: Lieferzeit 7-14 Tag (e) |
|
|||||||||||
| NB-530 | NEWBRAND | NB-530 Crimping Tools - Others |
auf Bestellung 60 Stücke: Lieferzeit 7-14 Tag (e) |
|
| 5 INCH 5D LENS |
Hersteller: NEWBRAND
LAMP-LENS-5D-5IN Desktop Magnifiers with Backlight
LAMP-LENS-5D-5IN Desktop Magnifiers with Backlight
auf Bestellung 21 Stücke:
Lieferzeit 7-14 Tag (e)| Anzahl | Preis |
|---|---|
| 7+ | 11.45 EUR |
| 12+ | 5.99 EUR |
| 15+ | 4.98 EUR |
| 16+ | 4.7 EUR |
| Lupenlampe LAMP-5D-LEDN1 Produktcode: 60994
zu Favoriten hinzufügen
Lieblingsprodukt
|
|
Hersteller: Newbrand
Werkzeuge und Geräte > Mikroskope, Binokulare, Lupen, Lupenleuchten
Gruppe: Linsen, Lupe
Beschreibung: Lupe hinterleuchtet; Vergroßerung 5 dpt (x2.25);Lange Stand 900mm
Збільшення: x2,25
Lupenlampe LAMP-5D-LEDN1
Werkzeuge und Geräte > Mikroskope, Binokulare, Lupen, Lupenleuchten
Gruppe: Linsen, Lupe
Beschreibung: Lupe hinterleuchtet; Vergroßerung 5 dpt (x2.25);Lange Stand 900mm
Збільшення: x2,25
Lupenlampe LAMP-5D-LEDN1
Produkt ist nicht verfügbar
| Anzahl | Preis |
|---|---|
| 1+ | 39.97 EUR |
| LAMP-5D-LEDN1B |
Hersteller: NEWBRAND
LAMP-5D-LEDN1B Desktop Magnifiers with Backlight
LAMP-5D-LEDN1B Desktop Magnifiers with Backlight
auf Bestellung 200 Stücke:
Lieferzeit 7-14 Tag (e)| Anzahl | Preis |
|---|---|
| 2+ | 44.7 EUR |
| LAMP-STAND |
Hersteller: NEWBRAND
LAMP-STAND Desktop Magnifiers with Backlight
LAMP-STAND Desktop Magnifiers with Backlight
auf Bestellung 47 Stücke:
Lieferzeit 7-14 Tag (e)| Anzahl | Preis |
|---|---|
| 2+ | 50.84 EUR |
| LUP-19-LED-N |
Hersteller: NEWBRAND
LUP-19-LED-N Desktop Magnifiers with Backlight
LUP-19-LED-N Desktop Magnifiers with Backlight
auf Bestellung 221 Stücke:
Lieferzeit 7-14 Tag (e)| Anzahl | Preis |
|---|---|
| 2+ | 41.68 EUR |
| 3+ | 26.13 EUR |
| LUP-19-LED-N1 |
Hersteller: NEWBRAND
LUP-19-LED-N1 Desktop Magnifiers with Backlight
LUP-19-LED-N1 Desktop Magnifiers with Backlight
auf Bestellung 240 Stücke:
Lieferzeit 7-14 Tag (e)| Anzahl | Preis |
|---|---|
| 2+ | 36.65 EUR |
| 3+ | 34.65 EUR |
| LUP-20-LED-SMD |
Hersteller: NEWBRAND
LUP-20-LED-SMD Desktop Magnifiers with Backlight
LUP-20-LED-SMD Desktop Magnifiers with Backlight
auf Bestellung 180 Stücke:
Lieferzeit 7-14 Tag (e)| Anzahl | Preis |
|---|---|
| 2+ | 39.51 EUR |
| 3+ | 30.36 EUR |
| Набор, ножи для радиолюбителей NB-KNIFE-SET Produktcode: 118004
zu Favoriten hinzufügen
Lieblingsprodukt
|
Hersteller: Newbrand
Werkzeuge > Messer, Skalpelle, Klingen
Тип: Ножі
Опис: Набір, ножі для радіолюбителів, 16штук, 13 змінних лез, 3 рукоятки різної форми для швидкого обтиску лез, кейс, призначені для широкого застосування, наприклад, формування пластмас, різання м'яких матеріалів, коригування паяних з' єднань
Werkzeuge > Messer, Skalpelle, Klingen
Тип: Ножі
Опис: Набір, ножі для радіолюбителів, 16штук, 13 змінних лез, 3 рукоятки різної форми для швидкого обтиску лез, кейс, призначені для широкого застосування, наприклад, формування пластмас, різання м'яких матеріалів, коригування паяних з' єднань
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| Набор, ножи для радиолюбителей SKALPEL-SET Produktcode: 118015
zu Favoriten hinzufügen
Lieblingsprodukt
|
Hersteller: Newbrand
Werkzeuge > Messer, Skalpelle, Klingen
Тип: Ножі
Опис: Ножі для радіолюбителів, в наборі - дві рукоятки різної форми, на які за допомогою обтиску швидко кріпляться змінні леза, а також допоміжний пінцет, змінні леза різного призначення закріплені в футлярі за допомогою магнітних пластин, набір поставляється в пластмасовому футлярі, що імітує дерев'яний ящик.
Werkzeuge > Messer, Skalpelle, Klingen
Тип: Ножі
Опис: Ножі для радіолюбителів, в наборі - дві рукоятки різної форми, на які за допомогою обтиску швидко кріпляться змінні леза, а також допоміжний пінцет, змінні леза різного призначення закріплені в футлярі за допомогою магнітних пластин, набір поставляється в пластмасовому футлярі, що імітує дерев'яний ящик.
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| NB-028B |
Hersteller: NEWBRAND
Category: Strippers for wire & cable
Description: Multifunction wire stripper and crimp tool; 30AWG÷8AWG; 210mm
Kind of stripping wire: flat; round
Type of tool: multifunction wire stripper and crimp tool
Crimp tool application: insulated connectors 0,5 - 6mm2; non-insulated terminals
Stripping tool features: rubber grips to better comfort; self adjusting to wire diameter; strip length adjustment ensures length repeatabillity
Wire cross-section: 0.05...10mm2
Length: 210mm
Wire size: 30AWG...8AWG
Used for wire stripping: cutting wires with a cross section 0,05 - 10mm2; insulation stripping from round cables 0.25 - 10mm2 (24AWG - 8AWG), with additional adjustment knob which extends the range to 0.05mm2 (30AWG)
Category: Strippers for wire & cable
Description: Multifunction wire stripper and crimp tool; 30AWG÷8AWG; 210mm
Kind of stripping wire: flat; round
Type of tool: multifunction wire stripper and crimp tool
Crimp tool application: insulated connectors 0,5 - 6mm2; non-insulated terminals
Stripping tool features: rubber grips to better comfort; self adjusting to wire diameter; strip length adjustment ensures length repeatabillity
Wire cross-section: 0.05...10mm2
Length: 210mm
Wire size: 30AWG...8AWG
Used for wire stripping: cutting wires with a cross section 0,05 - 10mm2; insulation stripping from round cables 0.25 - 10mm2 (24AWG - 8AWG), with additional adjustment knob which extends the range to 0.05mm2 (30AWG)
auf Bestellung 52 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 4+ | 18.26 EUR |
| 5+ | 16.22 EUR |
| 10+ | 15.2 EUR |
| 30+ | 13.71 EUR |
| NB-03SET -AS |
Hersteller: NEWBRAND
Category: Screwdrivers Sets
Description: Screwdriver: universal-set; Phillips,slot; plastic box; 8pcs.
Kind of bit: Phillips; slot
Kind of package: plastic box
Type of screwdriver: universal - set
Screwdrivers size (tip size | shank len. | overall len.): 0.1x5.5mm (38mm); 0.8x4mm (75mm); PH1 (75mm); PH1 (150mm); 1.2x6.5mm (125mm); 1.2x8mm (150mm); PH2 (38mm); PH2 (100mm)
Quantity in set/package: 8pcs.
Tool set features: black finished blade tip; ergonomic handle
Category: Screwdrivers Sets
Description: Screwdriver: universal-set; Phillips,slot; plastic box; 8pcs.
Kind of bit: Phillips; slot
Kind of package: plastic box
Type of screwdriver: universal - set
Screwdrivers size (tip size | shank len. | overall len.): 0.1x5.5mm (38mm); 0.8x4mm (75mm); PH1 (75mm); PH1 (150mm); 1.2x6.5mm (125mm); 1.2x8mm (150mm); PH2 (38mm); PH2 (100mm)
Quantity in set/package: 8pcs.
Tool set features: black finished blade tip; ergonomic handle
auf Bestellung 18 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 8+ | 9.22 EUR |
| 9+ | 8.19 EUR |
| 12+ | 7.44 EUR |
| NB-04SET |
Hersteller: NEWBRAND
Category: Screwdrivers Sets
Description: Screwdriver: insulated-set; insulated; Phillips,slot; 1kVAC
Type of screwdriver: insulated - set
Kind of screwdriver: insulated
Kind of bit: Phillips; slot
Bit size: PH0; PH1; PH2; 3x0.5mm; 4x0.8mm; 5.5x1mm; 6.5x1.2mm
Conform to the norm: VDE
Max. operating voltage: 1kV AC
Kind of package: plastic box
Quantity in set/package: 8pcs.
Tools application: for electricians; suitable for electrical, under voltage works
Tool set features: black finished blade tip; ergonomic handle; voltage indicator included
Category: Screwdrivers Sets
Description: Screwdriver: insulated-set; insulated; Phillips,slot; 1kVAC
Type of screwdriver: insulated - set
Kind of screwdriver: insulated
Kind of bit: Phillips; slot
Bit size: PH0; PH1; PH2; 3x0.5mm; 4x0.8mm; 5.5x1mm; 6.5x1.2mm
Conform to the norm: VDE
Max. operating voltage: 1kV AC
Kind of package: plastic box
Quantity in set/package: 8pcs.
Tools application: for electricians; suitable for electrical, under voltage works
Tool set features: black finished blade tip; ergonomic handle; voltage indicator included
auf Bestellung 23 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 5+ | 15.63 EUR |
| 6+ | 14.06 EUR |
| NB-336 |
Hersteller: NEWBRAND
Category: Crimping Tools for Terminals
Description: Tool: for crimping; insulated connectors,insulated terminals
Type of tool: for crimping
Wire size: 20AWG...10AWG
Crimp tool features: a ratched mechanism serves also as a handle lock; blackened tool; ergonomic bicomponent pads on handles; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
Tool length: 220mm
Wire cross-section: 0.5...6mm2
Crimp tool application: insulated connectors; insulated terminals
Tool material: carbon steel
Category: Crimping Tools for Terminals
Description: Tool: for crimping; insulated connectors,insulated terminals
Type of tool: for crimping
Wire size: 20AWG...10AWG
Crimp tool features: a ratched mechanism serves also as a handle lock; blackened tool; ergonomic bicomponent pads on handles; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
Tool length: 220mm
Wire cross-section: 0.5...6mm2
Crimp tool application: insulated connectors; insulated terminals
Tool material: carbon steel
auf Bestellung 122 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 4+ | 20.28 EUR |
| 5+ | 18.36 EUR |
| 20+ | 15.22 EUR |
| NB-8160-02 |
Hersteller: NEWBRAND
Category: Crimping Tools for Terminals
Description: Tool: for crimping; non-insulated terminals; 0.25÷2.5mm2
Type of tool: for crimping
Wire cross-section: 0.25...2.5mm2
Length: 190mm
Crimp tool features: blackened tool; ergonomic pads on handles; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
Wire size: 24AWG...14AWG
Crimp tool application: non-insulated terminals; non-insulated terminals
Related items: 342900; N42G-T1; N42W-T1; NLSW-T; NS39-T; NSLG-T
Category: Crimping Tools for Terminals
Description: Tool: for crimping; non-insulated terminals; 0.25÷2.5mm2
Type of tool: for crimping
Wire cross-section: 0.25...2.5mm2
Length: 190mm
Crimp tool features: blackened tool; ergonomic pads on handles; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
Wire size: 24AWG...14AWG
Crimp tool application: non-insulated terminals; non-insulated terminals
Related items: 342900; N42G-T1; N42W-T1; NLSW-T; NS39-T; NSLG-T
auf Bestellung 46 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 2+ | 39.1 EUR |
| 6+ | 36.09 EUR |
| 12+ | 33.09 EUR |
| 24+ | 30.09 EUR |
| NB-8160-04 |
Hersteller: NEWBRAND
Category: Crimping Tools for Terminals
Description: Tool: for crimping; terminals D-Sub connectors
Type of tool: for crimping
Related items: 2673.05.00.9; FCI-76357-301; NDR-T; NS25-T; NX2501-TF; TAMIYA-FT2; TAMIYA-MT2
Wire size: 22AWG...18AWG; 30AWG...24AWG
Crimp tool features: blackened tool; ergonomic pads on handles; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
Wire cross-section: 0.05...0.25mm2; 0.35...0.9mm2
Length: 190mm
Crimp tool application: terminals D-Sub connectors
Category: Crimping Tools for Terminals
Description: Tool: for crimping; terminals D-Sub connectors
Type of tool: for crimping
Related items: 2673.05.00.9; FCI-76357-301; NDR-T; NS25-T; NX2501-TF; TAMIYA-FT2; TAMIYA-MT2
Wire size: 22AWG...18AWG; 30AWG...24AWG
Crimp tool features: blackened tool; ergonomic pads on handles; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
Wire cross-section: 0.05...0.25mm2; 0.35...0.9mm2
Length: 190mm
Crimp tool application: terminals D-Sub connectors
auf Bestellung 88 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 2+ | 38.57 EUR |
| 6+ | 33.63 EUR |
| 12+ | 30.66 EUR |
| 24+ | 28.69 EUR |
| NB-8160-06 |
Hersteller: NEWBRAND
Category: Crimping Tools for Terminals
Description: Tool: for crimping; insulated solder sleeves; 0.5÷4mm2
Type of tool: for crimping
Crimp tool application: insulated solder sleeves; non-insulated solder sleeves
Wire cross-section: 0.5...4mm2
Wire size: 22AWG...12AWG
Length: 190mm
Crimp tool features: blackened tool; ergonomic pads on handles; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
Category: Crimping Tools for Terminals
Description: Tool: for crimping; insulated solder sleeves; 0.5÷4mm2
Type of tool: for crimping
Crimp tool application: insulated solder sleeves; non-insulated solder sleeves
Wire cross-section: 0.5...4mm2
Wire size: 22AWG...12AWG
Length: 190mm
Crimp tool features: blackened tool; ergonomic pads on handles; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
auf Bestellung 29 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 3+ | 34.11 EUR |
| 6+ | 29.74 EUR |
| 12+ | 26.25 EUR |
| NB-8163-04 |
Hersteller: NEWBRAND
Category: Crimping Tools for Coaxial/RF Connectors
Description: Tool: for crimping; BNC connectors,TNC connectors; 255mm
Kind of wire: RG58; RG59; RG62
Type of tool: for crimping
Die dimensions: 1.73mm; 5.41mm; 6.48mm
Length: 255mm
Crimp tool features: blackened tool; elongated handles enable operation with both hands; ergonomic pads on handles; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
Crimp tool application: BNC connectors; TNC connectors
Category: Crimping Tools for Coaxial/RF Connectors
Description: Tool: for crimping; BNC connectors,TNC connectors; 255mm
Kind of wire: RG58; RG59; RG62
Type of tool: for crimping
Die dimensions: 1.73mm; 5.41mm; 6.48mm
Length: 255mm
Crimp tool features: blackened tool; elongated handles enable operation with both hands; ergonomic pads on handles; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
Crimp tool application: BNC connectors; TNC connectors
auf Bestellung 11 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 3+ | 29.2 EUR |
| 5+ | 26.8 EUR |
| NB-CRIMP-SEAL01 |
Hersteller: NEWBRAND
Category: Crimping Tools - Others
Description: Tool: for crimping; Superseal 1.5 terminal; 210mm; Superseal 1.5
Type of tool: for crimping
Wire size: 16AWG; 17AWG; 18AWG; 22AWG...20AWG
Tool length: 210mm
Handle material: plastic
Wire cross-section: 0.35...0.5mm2; 0.75mm2; 1mm2; 1.5mm2
Application - series/manufacturer: Superseal 1.5
Crimp tool application: Superseal 1.5 terminal
Tool material: steel
Category: Crimping Tools - Others
Description: Tool: for crimping; Superseal 1.5 terminal; 210mm; Superseal 1.5
Type of tool: for crimping
Wire size: 16AWG; 17AWG; 18AWG; 22AWG...20AWG
Tool length: 210mm
Handle material: plastic
Wire cross-section: 0.35...0.5mm2; 0.75mm2; 1mm2; 1.5mm2
Application - series/manufacturer: Superseal 1.5
Crimp tool application: Superseal 1.5 terminal
Tool material: steel
auf Bestellung 67 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 3+ | 25.81 EUR |
| 5+ | 22.42 EUR |
| 10+ | 20.38 EUR |
| NB-CRIMP-TEST02 |
Hersteller: NEWBRAND
Category: Crimping Tools - Others
Description: Tools set: for crimping push-on connectors, terminal crimping
Kind of package: case
Kit contents: crimping jaws for crimping non-insulated connectors on wires with section: 1.5; 2.5; 6; 10mm2; (1 pc.); crimping jaws for crimping non-insulated connectors on wires with section: 0.5-1mm2 (20AWG - 18AWG); 1.5-2.5mm2 (16AWG - 14AWG); 4-6mm2 (12AWG - 10AWG); (1pc.); crimp tool; flat female connectors, non-insulated; (170 pcs.); flat male connectors, non-insulated; (170 pcs.); flat male connectors, non-insulated - splitters; (40 pcs.); fork terminals, non-insulated; (140 pcs.); insulating sheets for flat connectors; (60 pcs.); insulating sheets for round female connectors; (50 pcs.); insulating sheets for round male connectors; (30 pcs.); non-insulated butt splices; (180 pcs.); ring terminals, non-insulated; (330 pcs.); round female connectors, non-insulated; (70 pcs.); round male connectors, non-insulated; (70 pcs.)
Type of tools set: for crimping push-on connectors, terminal crimping
Bag material: plastic
Package dimensions: 370x280x70mm
Quantity in set/package: 1313pcs.
Category: Crimping Tools - Others
Description: Tools set: for crimping push-on connectors, terminal crimping
Kind of package: case
Kit contents: crimping jaws for crimping non-insulated connectors on wires with section: 1.5; 2.5; 6; 10mm2; (1 pc.); crimping jaws for crimping non-insulated connectors on wires with section: 0.5-1mm2 (20AWG - 18AWG); 1.5-2.5mm2 (16AWG - 14AWG); 4-6mm2 (12AWG - 10AWG); (1pc.); crimp tool; flat female connectors, non-insulated; (170 pcs.); flat male connectors, non-insulated; (170 pcs.); flat male connectors, non-insulated - splitters; (40 pcs.); fork terminals, non-insulated; (140 pcs.); insulating sheets for flat connectors; (60 pcs.); insulating sheets for round female connectors; (50 pcs.); insulating sheets for round male connectors; (30 pcs.); non-insulated butt splices; (180 pcs.); ring terminals, non-insulated; (330 pcs.); round female connectors, non-insulated; (70 pcs.); round male connectors, non-insulated; (70 pcs.)
Type of tools set: for crimping push-on connectors, terminal crimping
Bag material: plastic
Package dimensions: 370x280x70mm
Quantity in set/package: 1313pcs.
auf Bestellung 8 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 1+ | 110.21 EUR |
| 3+ | 97.91 EUR |
| 5+ | 83.91 EUR |
| NB-CRIMP-TSET01 |
Hersteller: NEWBRAND
Category: Crimping Tools - Others
Description: Tools set: for crimping push-on connectors, terminal crimping
Quantity in set/package: 1000pcs.
Kind of package: case
Kit contents: crimping jaws for crimping connector and insulated terminals on wires with section 0.5-6mm2;(22AWG - 10AWG); (1 pc.); crimping jaws for crimping non-insulated connectors on wires with section: 1.5; 2.5; 6; 10mm2; (1 pc.); crimp tool; flat female connectors, insulated; (30 pcs.); flat female connectors, non-insulated; (70 pcs.); flat male connectors, insulated; (60 pcs.); flat male connectors, non-insulated; (40 pcs.); fork terminals, insulated; (140 pcs.); fork terminals, non-insulated; (80 pcs.); insulated butt splices; (100 pcs.); non-insulated butt splices; (57 pcs.); ring terminals, insulated; (270 pcs.); ring terminals, non-insulated; (150 pcs.)
Type of tools set: for crimping push-on connectors, terminal crimping
Bag material: plastic
Package dimensions: 370x280x70mm
Category: Crimping Tools - Others
Description: Tools set: for crimping push-on connectors, terminal crimping
Quantity in set/package: 1000pcs.
Kind of package: case
Kit contents: crimping jaws for crimping connector and insulated terminals on wires with section 0.5-6mm2;(22AWG - 10AWG); (1 pc.); crimping jaws for crimping non-insulated connectors on wires with section: 1.5; 2.5; 6; 10mm2; (1 pc.); crimp tool; flat female connectors, insulated; (30 pcs.); flat female connectors, non-insulated; (70 pcs.); flat male connectors, insulated; (60 pcs.); flat male connectors, non-insulated; (40 pcs.); fork terminals, insulated; (140 pcs.); fork terminals, non-insulated; (80 pcs.); insulated butt splices; (100 pcs.); non-insulated butt splices; (57 pcs.); ring terminals, insulated; (270 pcs.); ring terminals, non-insulated; (150 pcs.)
Type of tools set: for crimping push-on connectors, terminal crimping
Bag material: plastic
Package dimensions: 370x280x70mm
auf Bestellung 50 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 1+ | 96.83 EUR |
| 3+ | 88.47 EUR |
| 10+ | 80.24 EUR |
| NB-CRIMP01H |
Hersteller: NEWBRAND
Category: Crimping Tools - Others
Description: Tool: for crimping; without crimping dies
Type of tool: for crimping
Related items: NB-JCRIMP10; NB-JCRIMP11; NB-JCRIMP12; NB-JCRIMP13; NB-JCRIMP14; NB-JCRIMP15; NB-JCRIMP16; NB-JCRIMP17; NB-JCRIMP18; NB-JCRIMP19; NB-JCRIMP20; NB-JCRIMP21; NB-JCRIMP01; NB-JCRIMP02; NB-JCRIMP03; NB-JCRIMP04; NB-JCRIMP05; NB-JCRIMP06; NB-JCRIMP07; NB-JCRIMP08; NB-JCRIMP09
Crimp tool features: blackened tool; ergonomic bicomponent pads on handles; jaws can be easily changed; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
Version: without crimping dies
Crimp tool length: 220mm
Tool material: steel
Category: Crimping Tools - Others
Description: Tool: for crimping; without crimping dies
Type of tool: for crimping
Related items: NB-JCRIMP10; NB-JCRIMP11; NB-JCRIMP12; NB-JCRIMP13; NB-JCRIMP14; NB-JCRIMP15; NB-JCRIMP16; NB-JCRIMP17; NB-JCRIMP18; NB-JCRIMP19; NB-JCRIMP20; NB-JCRIMP21; NB-JCRIMP01; NB-JCRIMP02; NB-JCRIMP03; NB-JCRIMP04; NB-JCRIMP05; NB-JCRIMP06; NB-JCRIMP07; NB-JCRIMP08; NB-JCRIMP09
Crimp tool features: blackened tool; ergonomic bicomponent pads on handles; jaws can be easily changed; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
Version: without crimping dies
Crimp tool length: 220mm
Tool material: steel
auf Bestellung 23 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 4+ | 18.82 EUR |
| 5+ | 16.79 EUR |
| 10+ | 15.77 EUR |
| NB-CRIMPSET05 |
Hersteller: NEWBRAND
Category: Crimping Tools - Others
Description: Blister; Application: BNC connectors,TNC connectors; 220mm
Crimp tool application: BNC connectors; TNC connectors
Kind of wire: RG6; RG58; RG59; RG62
Kit contents: crimp tool; interchangeable dies (5 pcs.)
Type of tools set: for crimping push-on connectors, terminal crimping and HF connector
Crimp tool length: 220mm
Wire cross section: 0,5...6mm2 (insulated connectors); 0,5...6mm2 (insulated terminals); 0,5...6mm2 (non-insulated terminals); 0,5; 0,75; 1; 1,5; 2,5; 4mm2 (insulated solder sleeves); 1,5...2,5mm2 (non-insulated terminals); 1,5; 2,5; 6; 10mm2 (non-insulated terminals); 4...6mm2 (non-insulated terminals)
Crimp tool features: blackened tool; ergonomic bicomponent pads on handles; jaws can be easily changed; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle; tool is made of steel
Kind of package: blister
Category: Crimping Tools - Others
Description: Blister; Application: BNC connectors,TNC connectors; 220mm
Crimp tool application: BNC connectors; TNC connectors
Kind of wire: RG6; RG58; RG59; RG62
Kit contents: crimp tool; interchangeable dies (5 pcs.)
Type of tools set: for crimping push-on connectors, terminal crimping and HF connector
Crimp tool length: 220mm
Wire cross section: 0,5...6mm2 (insulated connectors); 0,5...6mm2 (insulated terminals); 0,5...6mm2 (non-insulated terminals); 0,5; 0,75; 1; 1,5; 2,5; 4mm2 (insulated solder sleeves); 1,5...2,5mm2 (non-insulated terminals); 1,5; 2,5; 6; 10mm2 (non-insulated terminals); 4...6mm2 (non-insulated terminals)
Crimp tool features: blackened tool; ergonomic bicomponent pads on handles; jaws can be easily changed; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle; tool is made of steel
Kind of package: blister
auf Bestellung 77 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 1+ | 79.84 EUR |
| 5+ | 74.02 EUR |
| 10+ | 68.1 EUR |
| 50+ | 58.7 EUR |
| NB-CY-08 |
Hersteller: NEWBRAND
Category: Crimping Tools for Terminals
Description: Tool: for crimping; insulated solder sleeves; 0.2÷6mm2
Type of tool: for crimping
Crimp tool features: a special head mechanism crimps a die symmetrically; ergonomic, anti-slip pads made of two-component plastic on the handles; self-adjusting mechanism adapts the die shape to the size of crimped cable ferrule
Die shape: square
Wire cross-section: 0.2...6mm2
Length: 175mm
Crimp tool application: insulated solder sleeves; non-insulated solder sleeves
Tool material: steel
Category: Crimping Tools for Terminals
Description: Tool: for crimping; insulated solder sleeves; 0.2÷6mm2
Type of tool: for crimping
Crimp tool features: a special head mechanism crimps a die symmetrically; ergonomic, anti-slip pads made of two-component plastic on the handles; self-adjusting mechanism adapts the die shape to the size of crimped cable ferrule
Die shape: square
Wire cross-section: 0.2...6mm2
Length: 175mm
Crimp tool application: insulated solder sleeves; non-insulated solder sleeves
Tool material: steel
auf Bestellung 47 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 3+ | 29.07 EUR |
| 6+ | 25.8 EUR |
| 24+ | 23.44 EUR |
| NB-CY-08B |
Hersteller: NEWBRAND
Category: Crimping Tools for Terminals
Description: Tool: for crimping; insulated solder sleeves; 0.2÷8mm2
Type of tool: for crimping
Crimp tool features: a special head mechanism crimps a die symmetrically; ergonomic, anti-slip pads made of two-component plastic on the handles; self-adjusting mechanism adapts the die shape to the size of crimped cable ferrule
Die shape: square
Wire cross-section: 0.2...8mm2
Length: 175mm
Crimp tool application: insulated solder sleeves; non-insulated solder sleeves
Tool material: steel
Category: Crimping Tools for Terminals
Description: Tool: for crimping; insulated solder sleeves; 0.2÷8mm2
Type of tool: for crimping
Crimp tool features: a special head mechanism crimps a die symmetrically; ergonomic, anti-slip pads made of two-component plastic on the handles; self-adjusting mechanism adapts the die shape to the size of crimped cable ferrule
Die shape: square
Wire cross-section: 0.2...8mm2
Length: 175mm
Crimp tool application: insulated solder sleeves; non-insulated solder sleeves
Tool material: steel
auf Bestellung 93 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 3+ | 29.74 EUR |
| 6+ | 27.04 EUR |
| 12+ | 25.35 EUR |
| 36+ | 23.55 EUR |
| NB-DSIP-01 |
Hersteller: NEWBRAND
Category: Handles, Stands
Description: IPad holder; black; 3kg; Size: 240-252 x 186-196 x 8-14mm; 12.5"
Colour: black
Tools features: iPad can be tilted and rotated; non-slip pads
Type of tool: iPad holder
Screen size: 12.5"
Force: 3kg
Size: 240-252 x 186-196 x 8-14mm
Category: Handles, Stands
Description: IPad holder; black; 3kg; Size: 240-252 x 186-196 x 8-14mm; 12.5"
Colour: black
Tools features: iPad can be tilted and rotated; non-slip pads
Type of tool: iPad holder
Screen size: 12.5"
Force: 3kg
Size: 240-252 x 186-196 x 8-14mm
auf Bestellung 62 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 21+ | 3.52 EUR |
| NB-JCRIMP02 |
Hersteller: NEWBRAND
Category: Crimping Tools - Others
Description: Crimping jaws; non-insulated terminals; 8AWG,10AWG,14AWG,16AWG
Crimp tool application: non-insulated terminals
Tool material: steel
Type of spare part: crimping jaws
Wire cross-section: 1.5mm2; 2.5mm2; 6mm2; 10mm2
Wire size: 8AWG; 10AWG; 14AWG; 16AWG
Related items: NB-CRIMP01H
Category: Crimping Tools - Others
Description: Crimping jaws; non-insulated terminals; 8AWG,10AWG,14AWG,16AWG
Crimp tool application: non-insulated terminals
Tool material: steel
Type of spare part: crimping jaws
Wire cross-section: 1.5mm2; 2.5mm2; 6mm2; 10mm2
Wire size: 8AWG; 10AWG; 14AWG; 16AWG
Related items: NB-CRIMP01H
auf Bestellung 62 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 5+ | 14.4 EUR |
| 6+ | 12.91 EUR |
| 7+ | 11.45 EUR |
| NB-JCRIMP05 |
Hersteller: NEWBRAND
Category: Crimping Tools - Others
Description: Crimping jaws; BNC connectors,TNC connectors
Type of spare part: crimping jaws
Crimp tool application: BNC connectors; TNC connectors
Related items: NB-CRIMP01H
Tool material: steel
Kind of wire: RG6; RG58; RG59; RG62
Category: Crimping Tools - Others
Description: Crimping jaws; BNC connectors,TNC connectors
Type of spare part: crimping jaws
Crimp tool application: BNC connectors; TNC connectors
Related items: NB-CRIMP01H
Tool material: steel
Kind of wire: RG6; RG58; RG59; RG62
auf Bestellung 61 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 6+ | 12.3 EUR |
| 7+ | 10.78 EUR |
| 8+ | 9.51 EUR |
| NB-JCRIMP06 |
Hersteller: NEWBRAND
Category: Crimping Tools - Others
Description: Crimping jaws; 6AWG,8AWG,10AWG; 6mm2,10mm2,16mm2
Crimp tool application: insulated solder sleeves; non-insulated solder sleeves
Tool material: steel
Wire size: 6AWG; 8AWG; 10AWG
Wire cross-section: 6mm2; 0.1cm2; 16mm2
Related items: NB-CRIMP01H
Type of crimping tool accessories: crimping jaws
Category: Crimping Tools - Others
Description: Crimping jaws; 6AWG,8AWG,10AWG; 6mm2,10mm2,16mm2
Crimp tool application: insulated solder sleeves; non-insulated solder sleeves
Tool material: steel
Wire size: 6AWG; 8AWG; 10AWG
Wire cross-section: 6mm2; 0.1cm2; 16mm2
Related items: NB-CRIMP01H
Type of crimping tool accessories: crimping jaws
auf Bestellung 48 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 6+ | 12.41 EUR |
| 7+ | 10.88 EUR |
| 8+ | 9.61 EUR |
| NB-JCRIMP16 |
Hersteller: NEWBRAND
Category: Crimping Tools - Others
Description: Crimping jaws; Deutsch terminal; 16AWG,18AWG,20AWG; DT
Type of spare part: crimping jaws
Crimp tool application: Deutsch terminal
Related items: NB-CRIMP01H
Tool material: steel
Wire size: 16AWG; 18AWG; 20AWG
Application - series/manufacturer: DT
Category: Crimping Tools - Others
Description: Crimping jaws; Deutsch terminal; 16AWG,18AWG,20AWG; DT
Type of spare part: crimping jaws
Crimp tool application: Deutsch terminal
Related items: NB-CRIMP01H
Tool material: steel
Wire size: 16AWG; 18AWG; 20AWG
Application - series/manufacturer: DT
auf Bestellung 108 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 4+ | 18.06 EUR |
| 5+ | 16.26 EUR |
| 6+ | 14.23 EUR |
| NB-JCRIMP20 |
Hersteller: NEWBRAND
Category: Crimping Tools - Others
Description: Crimping jaws; insulated terminals,closed end connector
Type of spare part: crimping jaws
Related items: NB-CRIMP01H
Tool material: steel
Wire cross-section: 0.5...1.5mm2; 1.5...2.5mm2; 4...6mm2
Wire size: 12AWG...10AWG; 16AWG...14AWG; 22AWG...16AWG
Crimp tool application: closed end connector; insulated terminals
Category: Crimping Tools - Others
Description: Crimping jaws; insulated terminals,closed end connector
Type of spare part: crimping jaws
Related items: NB-CRIMP01H
Tool material: steel
Wire cross-section: 0.5...1.5mm2; 1.5...2.5mm2; 4...6mm2
Wire size: 12AWG...10AWG; 16AWG...14AWG; 22AWG...16AWG
Crimp tool application: closed end connector; insulated terminals
auf Bestellung 15 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 6+ | 12.38 EUR |
| 7+ | 10.85 EUR |
| NB-JCRIMP21 |
Hersteller: NEWBRAND
Category: Crimping Tools - Others
Description: Crimping jaws; solar connectors type SOLCON4; 2.5mm2,4mm2,6mm2
Type of spare part: crimping jaws
Related items: NB-CRIMP01H
Application: photovoltaics
Tool material: steel
Wire cross-section: 2.5mm2; 4mm2; 6mm2
Wire size: 10AWG; 12AWG; 14AWG
Crimp tool application: solar connectors type SOLCON4
Category: Crimping Tools - Others
Description: Crimping jaws; solar connectors type SOLCON4; 2.5mm2,4mm2,6mm2
Type of spare part: crimping jaws
Related items: NB-CRIMP01H
Application: photovoltaics
Tool material: steel
Wire cross-section: 2.5mm2; 4mm2; 6mm2
Wire size: 10AWG; 12AWG; 14AWG
Crimp tool application: solar connectors type SOLCON4
auf Bestellung 66 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 4+ | 20.48 EUR |
| 5+ | 18.03 EUR |
| NB-KEYISO-S01 |
Hersteller: NEWBRAND
Category: Wrenches Sets
Description: Wrench-set; insulated,socket spanner; 1kVAC; 16pcs.
Key features: a rachet handle with a reversal lever is fitted with a bi-component, ergonomic grip
Kind of package: case
Type of tool: wrench - set
Conform to the norm: IEC 60900:2004
Socket size: 4mm; 5mm; 6mm; 8mm; HEX 8mm; HEX 10mm; HEX 12mm; HEX 13mm; HEX 14mm; HEX 17mm; HEX 19mm; HEX 22mm
Quantity in set/package: 16pcs.
Max. operating voltage: 1kV AC
Kit contents: 3/8" 165mm long extension shaft; 3/8" 265mm long extension shaft; 3/8" fixture with ratchet; 6-angles sockets 3/8"; grip 3/8" type T lenght 221mm
Kind of wrench: insulated; socket spanner
Category: Wrenches Sets
Description: Wrench-set; insulated,socket spanner; 1kVAC; 16pcs.
Key features: a rachet handle with a reversal lever is fitted with a bi-component, ergonomic grip
Kind of package: case
Type of tool: wrench - set
Conform to the norm: IEC 60900:2004
Socket size: 4mm; 5mm; 6mm; 8mm; HEX 8mm; HEX 10mm; HEX 12mm; HEX 13mm; HEX 14mm; HEX 17mm; HEX 19mm; HEX 22mm
Quantity in set/package: 16pcs.
Max. operating voltage: 1kV AC
Kit contents: 3/8" 165mm long extension shaft; 3/8" 265mm long extension shaft; 3/8" fixture with ratchet; 6-angles sockets 3/8"; grip 3/8" type T lenght 221mm
Kind of wrench: insulated; socket spanner
auf Bestellung 11 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 1+ | 233.88 EUR |
| 2+ | 210.04 EUR |
| 4+ | 190.73 EUR |
| 10+ | 173.7 EUR |
| NB-PCUT01 |
Hersteller: NEWBRAND
Category: Cutting Pliers
Description: Pliers; cutting,for wire stripping; 170mm; 0.5÷6mm2
Tool material: SK5 steel
Wire cross-section: 0.5...6mm2
Pliers length: 170mm
Cutting range: copper cable Ø12mm max
Kind of pliers: cutting; for wire stripping
Oblique pliers/knives features: ergonomic two-component handles; opening lock; oval head
Type of tool: pliers
Category: Cutting Pliers
Description: Pliers; cutting,for wire stripping; 170mm; 0.5÷6mm2
Tool material: SK5 steel
Wire cross-section: 0.5...6mm2
Pliers length: 170mm
Cutting range: copper cable Ø12mm max
Kind of pliers: cutting; for wire stripping
Oblique pliers/knives features: ergonomic two-component handles; opening lock; oval head
Type of tool: pliers
auf Bestellung 82 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 4+ | 18.3 EUR |
| 5+ | 15.97 EUR |
| 20+ | 13.91 EUR |
| NB-SC02 |
Hersteller: NEWBRAND
Category: Screwdrivers Sets
Description: Screwdriver: precision-set; precision; Phillips,slot; 7pcs.
Type of screwdriver: precision - set
Kind of screwdriver: precision
Kind of bit: Phillips; slot
Kind of package: plastic box
Quantity in set/package: 7pcs.
Screwdriver features: anti-slip handle; black finished blade tip; ergonomic handle with rotating cap at the end; precision screwdrivers - rotary cap
Screwdrivers size (tip size | shank len. | overall len.): PH00 (50mm); PH0 (50mm); 0.4x1.4mm (50mm); 0.4x2mm (50mm); 0.4x2.5mm (50mm); 0.5x3mm (50mm); PH1 (50mm)
Category: Screwdrivers Sets
Description: Screwdriver: precision-set; precision; Phillips,slot; 7pcs.
Type of screwdriver: precision - set
Kind of screwdriver: precision
Kind of bit: Phillips; slot
Kind of package: plastic box
Quantity in set/package: 7pcs.
Screwdriver features: anti-slip handle; black finished blade tip; ergonomic handle with rotating cap at the end; precision screwdrivers - rotary cap
Screwdrivers size (tip size | shank len. | overall len.): PH00 (50mm); PH0 (50mm); 0.4x1.4mm (50mm); 0.4x2mm (50mm); 0.4x2.5mm (50mm); 0.5x3mm (50mm); PH1 (50mm)
auf Bestellung 1065 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 15+ | 4.86 EUR |
| 17+ | 4.33 EUR |
| 18+ | 4.06 EUR |
| 50+ | 3.65 EUR |
| 100+ | 3.52 EUR |
| NB-STRIP01 |
Hersteller: NEWBRAND
Category: Strippers for wire & cable
Description: Stripping tool; Wire: coaxial,round,flat; 125mm
Type of tool: stripping tool
Kind of wire: RG6; RG7; RG11; RG59; UTP/STP
Tool material: plastic
Kind of stripping wire: coaxial; flat; round
Length: 125mm
Stripping tool features: adjustment knob enables to set cut depth; flat cable stripping is made by blades which operate after pressing the tool lever; insulation is cut after the tool rotates several times around the cable axis; insulation is stripped from circular cables by putting through the stripper self-tightening ring
Category: Strippers for wire & cable
Description: Stripping tool; Wire: coaxial,round,flat; 125mm
Type of tool: stripping tool
Kind of wire: RG6; RG7; RG11; RG59; UTP/STP
Tool material: plastic
Kind of stripping wire: coaxial; flat; round
Length: 125mm
Stripping tool features: adjustment knob enables to set cut depth; flat cable stripping is made by blades which operate after pressing the tool lever; insulation is cut after the tool rotates several times around the cable axis; insulation is stripped from circular cables by putting through the stripper self-tightening ring
auf Bestellung 5 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 5+ | 14.3 EUR |
| NB-STRIP05 |
Hersteller: NEWBRAND
Category: Strippers for wire & cable
Description: Stripping tool; 0.5÷5.5mm2; Wire: round,flat; 170mm
Type of tool: stripping tool
Wire cross-section: 0.5...5.5mm2
Kind of stripping wire: flat; round
Stripping tool features: additionally fitted with cable cutter; adjustable jaws pressing force; max width stripping wire: 12mm
Strip length: 2...20mm
Length: 170mm
Category: Strippers for wire & cable
Description: Stripping tool; 0.5÷5.5mm2; Wire: round,flat; 170mm
Type of tool: stripping tool
Wire cross-section: 0.5...5.5mm2
Kind of stripping wire: flat; round
Stripping tool features: additionally fitted with cable cutter; adjustable jaws pressing force; max width stripping wire: 12mm
Strip length: 2...20mm
Length: 170mm
auf Bestellung 83 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 5+ | 15.76 EUR |
| 6+ | 13.87 EUR |
| 10+ | 12.44 EUR |
| NB-STRIP06 |
Hersteller: NEWBRAND
Category: Strippers for wire & cable
Description: Stripping tool; 0.2÷6mm2; Wire: round,multi-core
Type of tool: stripping tool
Wire cross-section: 0.2...6mm2
Kind of stripping wire: multi-core; round
Stripping tool features: block; ergonomic shape ensures convenient and safe operation; fiberglass reinforced construction; fitted with cutter for max 2,0mm diameter wires; for operation in hard to reach places; self adjusting to wire diameter
Strip length: 8...12mm
Category: Strippers for wire & cable
Description: Stripping tool; 0.2÷6mm2; Wire: round,multi-core
Type of tool: stripping tool
Wire cross-section: 0.2...6mm2
Kind of stripping wire: multi-core; round
Stripping tool features: block; ergonomic shape ensures convenient and safe operation; fiberglass reinforced construction; fitted with cutter for max 2,0mm diameter wires; for operation in hard to reach places; self adjusting to wire diameter
Strip length: 8...12mm
auf Bestellung 342 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 4+ | 19.13 EUR |
| 5+ | 17.53 EUR |
| 10+ | 15.03 EUR |
| NB-STRIP08 |
Hersteller: NEWBRAND
Category: Strippers for wire & cable
Description: Stripping tool; 20AWG÷10AWG; 0.8÷2.6mm2; Wire: round; 165mm
Type of tool: stripping tool
Wire cross-section: 0.8...2.6mm2
Kind of stripping wire: round
Stripping tool features: block; burnished; fitted with demountable return spring; marked with symbols defining the function of each die and jaw; the handles are fitted with ergonomic plastic pads
Used for wire stripping: copper wire cutting; gripping and forming copper wires; insulation stripping
Tool material: SK5 steel
Tool length: 165mm
Wire size: 20AWG...10AWG
Category: Strippers for wire & cable
Description: Stripping tool; 20AWG÷10AWG; 0.8÷2.6mm2; Wire: round; 165mm
Type of tool: stripping tool
Wire cross-section: 0.8...2.6mm2
Kind of stripping wire: round
Stripping tool features: block; burnished; fitted with demountable return spring; marked with symbols defining the function of each die and jaw; the handles are fitted with ergonomic plastic pads
Used for wire stripping: copper wire cutting; gripping and forming copper wires; insulation stripping
Tool material: SK5 steel
Tool length: 165mm
Wire size: 20AWG...10AWG
auf Bestellung 90 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 6+ | 12.16 EUR |
| 7+ | 11.25 EUR |
| 8+ | 10.05 EUR |
| 20+ | 8.29 EUR |
| NB-STRIP09 |
Hersteller: NEWBRAND
Category: Strippers for wire & cable
Description: Stripping tool; 8AWG÷4AWG; 10÷25mm2; Wire: round; 165mm
Type of tool: stripping tool
Wire cross-section: 10...25mm2
Kind of stripping wire: round
Stripping tool features: block; burnished; fitted with demountable return spring; marked with symbols defining the function of each die and jaw; the handles are fitted with ergonomic plastic pads
Used for wire stripping: copper wire cutting; gripping and forming copper wires; insulation stripping
Tool material: steel
Tool length: 165mm
Wire size: 8AWG...4AWG
Category: Strippers for wire & cable
Description: Stripping tool; 8AWG÷4AWG; 10÷25mm2; Wire: round; 165mm
Type of tool: stripping tool
Wire cross-section: 10...25mm2
Kind of stripping wire: round
Stripping tool features: block; burnished; fitted with demountable return spring; marked with symbols defining the function of each die and jaw; the handles are fitted with ergonomic plastic pads
Used for wire stripping: copper wire cutting; gripping and forming copper wires; insulation stripping
Tool material: steel
Tool length: 165mm
Wire size: 8AWG...4AWG
auf Bestellung 191 Stücke:
Lieferzeit 14-21 Tag (e)| Anzahl | Preis |
|---|---|
| 10+ | 7.89 EUR |
| 11+ | 6.89 EUR |
| 12+ | 6.08 EUR |
| NB-028 |
Hersteller: NEWBRAND
NB-028 Strippers for wire & cable
NB-028 Strippers for wire & cable
auf Bestellung 436 Stücke:
Lieferzeit 7-14 Tag (e)| Anzahl | Preis |
|---|---|
| 4+ | 19.51 EUR |
| 6+ | 12.36 EUR |
| NB-028B |
Hersteller: NEWBRAND
Category: Strippers for wire & cable
Description: Multifunction wire stripper and crimp tool; 30AWG÷8AWG; 210mm
Kind of stripping wire: flat; round
Type of tool: multifunction wire stripper and crimp tool
Crimp tool application: insulated connectors 0,5 - 6mm2; non-insulated terminals
Stripping tool features: rubber grips to better comfort; self adjusting to wire diameter; strip length adjustment ensures length repeatabillity
Wire cross-section: 0.05...10mm2
Length: 210mm
Wire size: 30AWG...8AWG
Used for wire stripping: cutting wires with a cross section 0,05 - 10mm2; insulation stripping from round cables 0.25 - 10mm2 (24AWG - 8AWG), with additional adjustment knob which extends the range to 0.05mm2 (30AWG)
Anzahl je Verpackung: 1 Stücke
Category: Strippers for wire & cable
Description: Multifunction wire stripper and crimp tool; 30AWG÷8AWG; 210mm
Kind of stripping wire: flat; round
Type of tool: multifunction wire stripper and crimp tool
Crimp tool application: insulated connectors 0,5 - 6mm2; non-insulated terminals
Stripping tool features: rubber grips to better comfort; self adjusting to wire diameter; strip length adjustment ensures length repeatabillity
Wire cross-section: 0.05...10mm2
Length: 210mm
Wire size: 30AWG...8AWG
Used for wire stripping: cutting wires with a cross section 0,05 - 10mm2; insulation stripping from round cables 0.25 - 10mm2 (24AWG - 8AWG), with additional adjustment knob which extends the range to 0.05mm2 (30AWG)
Anzahl je Verpackung: 1 Stücke
auf Bestellung 52 Stücke:
Lieferzeit 7-14 Tag (e)| Anzahl | Preis |
|---|---|
| 4+ | 18.26 EUR |
| 5+ | 16.22 EUR |
| 10+ | 15.2 EUR |
| 30+ | 13.71 EUR |
| NB-028/S |
Hersteller: NEWBRAND
NB-028/S Strippers for wire & cable
NB-028/S Strippers for wire & cable
auf Bestellung 98 Stücke:
Lieferzeit 7-14 Tag (e)| Anzahl | Preis |
|---|---|
| 25+ | 2.86 EUR |
| 51+ | 1.42 EUR |
| 93+ | 0.77 EUR |
| 98+ | 0.73 EUR |
| NB-03SET -AS |
Hersteller: NEWBRAND
Category: Screwdrivers Sets
Description: Screwdriver: universal-set; Phillips,slot; plastic box; 8pcs.
Kind of bit: Phillips; slot
Kind of package: plastic box
Type of screwdriver: universal - set
Screwdrivers size (tip size | shank len. | overall len.): 0.1x5.5mm (38mm); 0.8x4mm (75mm); PH1 (75mm); PH1 (150mm); 1.2x6.5mm (125mm); 1.2x8mm (150mm); PH2 (38mm); PH2 (100mm)
Quantity in set/package: 8pcs.
Tool set features: black finished blade tip; ergonomic handle
Anzahl je Verpackung: 1 Stücke
Category: Screwdrivers Sets
Description: Screwdriver: universal-set; Phillips,slot; plastic box; 8pcs.
Kind of bit: Phillips; slot
Kind of package: plastic box
Type of screwdriver: universal - set
Screwdrivers size (tip size | shank len. | overall len.): 0.1x5.5mm (38mm); 0.8x4mm (75mm); PH1 (75mm); PH1 (150mm); 1.2x6.5mm (125mm); 1.2x8mm (150mm); PH2 (38mm); PH2 (100mm)
Quantity in set/package: 8pcs.
Tool set features: black finished blade tip; ergonomic handle
Anzahl je Verpackung: 1 Stücke
auf Bestellung 18 Stücke:
Lieferzeit 7-14 Tag (e)| Anzahl | Preis |
|---|---|
| 8+ | 9.22 EUR |
| 9+ | 8.19 EUR |
| 12+ | 7.44 EUR |
| 60+ | 6.92 EUR |
| NB-04SET |
Hersteller: NEWBRAND
Category: Screwdrivers Sets
Description: Screwdriver: insulated-set; insulated; Phillips,slot; 1kVAC
Type of screwdriver: insulated - set
Kind of screwdriver: insulated
Kind of bit: Phillips; slot
Bit size: PH0; PH1; PH2; 3x0.5mm; 4x0.8mm; 5.5x1mm; 6.5x1.2mm
Conform to the norm: VDE
Max. operating voltage: 1kV AC
Kind of package: plastic box
Quantity in set/package: 8pcs.
Tools application: for electricians; suitable for electrical, under voltage works
Tool set features: black finished blade tip; ergonomic handle; voltage indicator included
Anzahl je Verpackung: 1 Stücke
Category: Screwdrivers Sets
Description: Screwdriver: insulated-set; insulated; Phillips,slot; 1kVAC
Type of screwdriver: insulated - set
Kind of screwdriver: insulated
Kind of bit: Phillips; slot
Bit size: PH0; PH1; PH2; 3x0.5mm; 4x0.8mm; 5.5x1mm; 6.5x1.2mm
Conform to the norm: VDE
Max. operating voltage: 1kV AC
Kind of package: plastic box
Quantity in set/package: 8pcs.
Tools application: for electricians; suitable for electrical, under voltage works
Tool set features: black finished blade tip; ergonomic handle; voltage indicator included
Anzahl je Verpackung: 1 Stücke
auf Bestellung 23 Stücke:
Lieferzeit 7-14 Tag (e)| Anzahl | Preis |
|---|---|
| 5+ | 15.63 EUR |
| 6+ | 14.06 EUR |
| 24+ | 11.78 EUR |
| NB-05SET |
Hersteller: NEWBRAND
NB-05SET Tool Sets
NB-05SET Tool Sets
auf Bestellung 272 Stücke:
Lieferzeit 7-14 Tag (e)| Anzahl | Preis |
|---|---|
| 2+ | 44.84 EUR |
| 3+ | 31.62 EUR |
| NB-2001C Produktcode: 108453
zu Favoriten hinzufügen
Lieblingsprodukt
|
Hersteller: Newbrand
Werkzeuge > Zangen, Seitenschneider, Flachzangen, Kneifzangen
Тип: Seiteschneider
Опис: Fuers Schneiden, Abgerundete Kanten
Werkzeuge > Zangen, Seitenschneider, Flachzangen, Kneifzangen
Тип: Seiteschneider
Опис: Fuers Schneiden, Abgerundete Kanten
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| NB-208K Extraktion von Lötmittel mit Teflon Spitze Produktcode: 35852
zu Favoriten hinzufügen
Lieblingsprodukt
|
Hersteller: Newbrand
Lötgeräte, Lötmaterial > Löttechnik. Verschiedenes
Kategorie: Extraktion von Lötmittel
Beschreibung: Extraktion von Lötmittel mit hitzebeständiger Teflon Spitze
Lötgeräte, Lötmaterial > Löttechnik. Verschiedenes
Kategorie: Extraktion von Lötmittel
Beschreibung: Extraktion von Lötmittel mit hitzebeständiger Teflon Spitze
Produkt ist nicht verfügbar
| Anzahl | Preis |
|---|---|
| 1+ | 3.6 EUR |
| NB-208T Spitze Teflon zur Extraktion von Lötmittel NB-208K Produktcode: 35853
zu Favoriten hinzufügen
Lieblingsprodukt
|
Hersteller: Newbrand
Lötgeräte, Lötmaterial > Löttechnik. Verschiedenes
Kategorie: Extraktion von Lötmittel
Beschreibung: Spitze Teflon zur Extraktion von Lötmittel NB-208K
Lötgeräte, Lötmaterial > Löttechnik. Verschiedenes
Kategorie: Extraktion von Lötmittel
Beschreibung: Spitze Teflon zur Extraktion von Lötmittel NB-208K
Produkt ist nicht verfügbar
| Anzahl | Preis |
|---|---|
| 1+ | 0.75 EUR |
| NB-3001 |
Hersteller: NEWBRAND
NB-3001 Cutting Pliers
NB-3001 Cutting Pliers
auf Bestellung 85 Stücke:
Lieferzeit 7-14 Tag (e)| Anzahl | Preis |
|---|---|
| 7+ | 11.35 EUR |
| 10+ | 7.24 EUR |
| 11+ | 6.84 EUR |
| NB-336 |
Hersteller: NEWBRAND
Category: Crimping Tools for Terminals
Description: Tool: for crimping; insulated connectors,insulated terminals
Type of tool: for crimping
Wire size: 20AWG...10AWG
Crimp tool features: a ratched mechanism serves also as a handle lock; blackened tool; ergonomic bicomponent pads on handles; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
Tool length: 220mm
Wire cross-section: 0.5...6mm2
Crimp tool application: insulated connectors; insulated terminals
Tool material: carbon steel
Anzahl je Verpackung: 1 Stücke
Category: Crimping Tools for Terminals
Description: Tool: for crimping; insulated connectors,insulated terminals
Type of tool: for crimping
Wire size: 20AWG...10AWG
Crimp tool features: a ratched mechanism serves also as a handle lock; blackened tool; ergonomic bicomponent pads on handles; the crimp correctness is ensured by special ratchet mechanism which enables to open the tool only after finishing the full crimping cycle
Tool length: 220mm
Wire cross-section: 0.5...6mm2
Crimp tool application: insulated connectors; insulated terminals
Tool material: carbon steel
Anzahl je Verpackung: 1 Stücke
auf Bestellung 122 Stücke:
Lieferzeit 7-14 Tag (e)| Anzahl | Preis |
|---|---|
| 4+ | 20.28 EUR |
| 5+ | 18.36 EUR |
| 20+ | 15.22 EUR |
| NB-45-1-B |
Hersteller: NEWBRAND
NB-45-1-B Tool bags and cases
NB-45-1-B Tool bags and cases
auf Bestellung 15 Stücke:
Lieferzeit 7-14 Tag (e)| Anzahl | Preis |
|---|---|
| 2+ | 36.94 EUR |
| 3+ | 32.96 EUR |
| NB-45-27 |
Hersteller: NEWBRAND
NB-45-27 Tool bags and cases
NB-45-27 Tool bags and cases
auf Bestellung 15 Stücke:
Lieferzeit 7-14 Tag (e)| Anzahl | Preis |
|---|---|
| 3+ | 25.11 EUR |
| 4+ | 23.74 EUR |
| NB-45-28 |
Hersteller: NEWBRAND
NB-45-28 Tool bags and cases
NB-45-28 Tool bags and cases
auf Bestellung 1 Stücke:
Lieferzeit 7-14 Tag (e)| Anzahl | Preis |
|---|---|
| 1+ | 71.5 EUR |
| 2+ | 36.98 EUR |
| NB-45-29 |
Hersteller: NEWBRAND
NB-45-29 Tool bags and cases
NB-45-29 Tool bags and cases
auf Bestellung 20 Stücke:
Lieferzeit 7-14 Tag (e)| Anzahl | Preis |
|---|---|
| 2+ | 35.92 EUR |
| 3+ | 23.95 EUR |
| NB-45-2-B |
Hersteller: NEWBRAND
NB-45-2-B Tool bags and cases
NB-45-2-B Tool bags and cases
auf Bestellung 16 Stücke:
Lieferzeit 7-14 Tag (e)| Anzahl | Preis |
|---|---|
| 2+ | 36.98 EUR |
| 3+ | 34.96 EUR |
| 5+ | 34.59 EUR |
| NB-45-3 |
Hersteller: NEWBRAND
NB-45-3 Tool bags and cases
NB-45-3 Tool bags and cases
auf Bestellung 1 Stücke:
Lieferzeit 7-14 Tag (e)| Anzahl | Preis |
|---|---|
| 1+ | 71.5 EUR |
| 3+ | 52.78 EUR |
| NB-45-30 |
Hersteller: NEWBRAND
NB-45-30 Tool bags and cases
NB-45-30 Tool bags and cases
auf Bestellung 4 Stücke:
Lieferzeit 7-14 Tag (e)| Anzahl | Preis |
|---|---|
| 1+ | 99.61 EUR |
| NB-45-6-B |
Hersteller: NEWBRAND
NB-45-6-B Tool bags and cases
NB-45-6-B Tool bags and cases
auf Bestellung 3 Stücke:
Lieferzeit 7-14 Tag (e)| Anzahl | Preis |
|---|---|
| 1+ | 76.06 EUR |
| NB-46-1510 |
Hersteller: NEWBRAND
NB-46-1510 Tool bags and cases
NB-46-1510 Tool bags and cases
auf Bestellung 2 Stücke:
Lieferzeit 7-14 Tag (e)| Anzahl | Preis |
|---|---|
| 1+ | 213.27 EUR |
| NB-530 |
Hersteller: NEWBRAND
NB-530 Crimping Tools - Others
NB-530 Crimping Tools - Others
auf Bestellung 60 Stücke:
Lieferzeit 7-14 Tag (e)| Anzahl | Preis |
|---|---|
| 1+ | 71.57 EUR |