Produkte > AG TERMOPASTY > Alle Produkte des Herstellers AG TERMOPASTY (504) > Seite 3 nach 9

Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 1mm; 2.4W/mK
Type of tape: heat transfer
Width: 30mm
Length: 30mm
Thickness: 1mm
Thermal conductivity: 2.4W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: double-sided; glued

Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 2mm; 2.4W/mK
Type of tape: heat transfer
Width: 30mm
Length: 30mm
Thickness: 2mm
Thermal conductivity: 2.4W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: double-sided; glued

Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 3mm; 2.4W/mK
Type of tape: heat transfer
Width: 30mm
Length: 30mm
Thickness: 3mm
Thermal conductivity: 2.4W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: double-sided; glued

Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 1mm; 6W/mK
Type of tape: heat transfer
Width: 30mm
Length: 30mm
Thickness: 1mm
Thermal conductivity: 6W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: double-sided; glued

Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 2mm; 6W/mK
Type of tape: heat transfer
Width: 30mm
Length: 30mm
Thickness: 2mm
Thermal conductivity: 6W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: double-sided; glued

Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 3mm; 6W/mK
Type of tape: heat transfer
Width: 30mm
Length: 30mm
Thickness: 3mm
Thermal conductivity: 6W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: double-sided; glued

Hersteller: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; grey; stainless steel particles,silicone
Application: facilitates heat transfer
GHS Code: GHS09
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Agent application: heatsinks
Type of chemical agent: heat transfer paste
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Appearance: paste
Grease ingredients: silicone; stainless steel particles
Signal word: Warning
Operating temperature: -50...250°C
Net weight: 1g
Thermal conductivity: 6W/mK
Name: AG EXTREME
Colour: grey
Kind of package: syringe

Hersteller: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; silver; silicone+silver; AG SILVER; 3.8W/mK
Type of chemical agent: heat transfer paste
Colour: silver
Thermal conductivity: 3.8W/mK
Kind of package: syringe
Net weight: 1g
Operating temperature: -30...300°C
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Application: facilitates heat transfer
GHS Code: GHS09
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Agent application: heatsinks
Name: AG SILVER
Appearance: paste
Grease ingredients: silicone+silver
Signal word: Warning

Hersteller: AG TERMOPASTY
Category: Lubricants
Description: Grease; spray; Ingredients: PTFE; can; 100ml; -50÷260°C
Type of chemical agent: grease
Appearance: spray
Grease ingredients: PTFE
Kind of package: can
Capacity: 0.1l
Operating temperature: -50...260°C
Resistance to: moisture; most of oils; most of solvents
Application: lubrication
Agent features: dry lubricant; low friction factor
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02

Hersteller: AG TERMOPASTY
Category: Lubricants
Description: High-temperature lubricant; spray; can; 100ml; -40÷1200°C
Type of chemical agent: high-temperature lubricant
Capacity: 0.1l
Appearance: spray
Kind of package: can
Application: lubrication
Agent application: break systems; ignition plugs sockets; threaded joints
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H361f: Suspected of damaging fertility.; H373: May cause damage to organs; H412: Harmful to aquatic life with long lasting effects.
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02; GHS08
Operating temperature: -40...1200°C
Agent features: do not cause corrosion; silicone free
Resistance to: moisture; most of oils; most of solvents; temperature

Hersteller: AG TERMOPASTY
Category: Cleaning & maintaining products
Description: Cleaning agent; 400ml; spray; can; Signal word: Danger
Type of chemical agent: cleaning agent
Capacity: 0.4l
Appearance: spray
Kind of package: can
Application: degreasing; dust removing; impurities removing; nicotine stains removing
Agent application: plastics
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02

Hersteller: AG TERMOPASTY
Category: Wipes & cleaning clothes
Description: Cleaning cloth: cloth; 24pcs; 220x160mm; cleaning
Application: cleaning
Type of cleaning cloth: cloth
Agent application: computer equipment; office equipment
Agent features: moistened with cleaning agent
Cloth dimensions: 220x160mm
Quantity in set/package: 24pcs.

Hersteller: AG TERMOPASTY
Category: Lubricants
Description: High-temperature lubricant; spray; can; 400ml; -30÷150°C
Type of chemical agent: high-temperature lubricant
Capacity: 0.4l
Appearance: spray
Kind of package: can
Application: lubrication
Agent application: articulated joints; gears; hinges
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H315: Causes skin irritation; H361f: Suspected of damaging fertility.; H373: May cause damage to organs; H412: Harmful to aquatic life with long lasting effects.
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician; P331: Do NOT induce vomiting.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02; GHS07; GHS08
Grease ingredients: molybdenum disulfide
Name: SMAR Z DWUSIARCZKIEM MOLIBDENU
Operating temperature: -30...150°C
Agent features: reduces friction

Hersteller: AG TERMOPASTY
Category: Lubricants
Description: Grease; spray; can; SMAR GRAFITOWY; 400ml; -20÷50°C
Kind of package: can
Agent application: chains; gears; threaded joints
Application: lubrication
Signal word: Danger
Agent features: do not cause corrosion
GHS Code: GHS02; GHS08
Type of chemical agent: grease
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H361: Suspected of damaging fertility or the unborn child; H373: May cause damage to organs; H412: Harmful to aquatic life with long lasting effects.
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P308 + P313: IF exposed or concerned: Get medical advice/attention.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
Name: SMAR GRAFITOWY
Appearance: spray
Resistance to: water
Operating temperature: -20...50°C
Capacity: 0.4l

Hersteller: AG TERMOPASTY
Category: Lubricants
Description: Grease; spray; Ingredients: PTFE; can; 400ml; -50÷260°C
Type of chemical agent: grease
Appearance: spray
Grease ingredients: PTFE
Kind of package: can
Capacity: 0.4l
Operating temperature: -50...260°C
Resistance to: moisture; most of oils; most of solvents
Application: lubrication
Agent features: dry lubricant; low friction factor
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02

Hersteller: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; RMA; gel; plastic container; 10ml
Type of flux: rosin based
Appearance: gel
Capacity: 10ml
Signal word: Danger
Hazard statements: H315: Causes skin irritation; H317: May cause an allergic skin reaction.; H318: Causes serious eye damage; H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled.
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P342 + P311: If experiencing respiratory symptoms: Call a POISON CENTER or doctor/physician.
GHS Code: GHS05; GHS08
Kind of package: plastic container
Applications of soldering equipment: SMD soldering
Kind of flux: RMA

Hersteller: AG TERMOPASTY
Category: Glues
Description: Heat transfer glue; white; Termoglue; 1W/mK; -60÷180°C,max.200°C
Type of chemical agent: heat transfer glue
Colour: white
Agent application: heatsinks
Name: Termoglue
Thermal conductivity: 1W/mK
Tensile strength: 2MPa
Min. breakdown voltage: 20kV/mm
Operating temperature: -60...180°C; max. 200°C
Dielectric constant: 3
Drying time: 5...15min
Net weight: 120g

Hersteller: AG TERMOPASTY
Category: Wipes & cleaning clothes
Description: Cleaning cloth: cloth; 25pcs; 160x125mm; cleaning; presaturated
Type of cleaning cloth: cloth
Quantity in set/package: 25pcs.
Cloth dimensions: 160x125mm
Application: cleaning
Agent application: electronic components; optical equipment; precision mechanics
Grease ingredients: 99,9% IPA
Signal word: Danger
Hazard statements: H225: Highly flammable liquid and vapour.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P312: Call a POISON CENTER or doctor/physician if you feel unwell.; P370 + P378: In case of fire: Use ...for extinction.
Version: presaturated
GHS Code: GHS02; GHS07

Hersteller: AG TERMOPASTY
Category: Cleaning & maintaining products
Description: Cleaning agent; 250ml; liquid; bottle with atomizer
Kind of package: bottle with atomizer
Agent application: LCD/TFT displays; screens
Appearance: liquid
Capacity: 0.25l
Application: cleaning; dust removing; impurities removing
Type of chemical agent: cleaning agent

Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 200mm; L: 400mm; Thk: 2mm; 6W/mK
Type of tape: heat transfer
Width: 200mm
Length: 0.4m
Thickness: 2mm
Thermal conductivity: 6W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: double-sided; glued

Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 200mm; L: 400mm; Thk: 3mm; 6W/mK
Type of tape: heat transfer
Width: 200mm
Length: 0.4m
Thickness: 3mm
Thermal conductivity: 6W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: double-sided; glued

Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 200mm; L: 400mm; Thk: 1mm; 2.4W/mK
Type of tape: heat transfer
Width: 200mm
Length: 0.4m
Thickness: 1mm
Thermal conductivity: 2.4W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: double-sided; glued

Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 200mm; L: 400mm; Thk: 2mm; 2.4W/mK
Type of tape: heat transfer
Width: 200mm
Length: 0.4m
Thickness: 2mm
Thermal conductivity: 2.4W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: double-sided; glued

Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 200mm; L: 400mm; Thk: 3mm; 2.4W/mK
Type of tape: heat transfer
Width: 200mm
Length: 0.4m
Thickness: 3mm
Thermal conductivity: 2.4W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: double-sided; glued

Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 200mm; L: 400mm; Thk: 1mm; 1.5W/mK
Type of tape: heat transfer
Width: 200mm
Length: 0.4m
Thickness: 1mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: double-sided; glued

Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 200mm; L: 400mm; Thk: 2mm; 1.5W/mK
Type of tape: heat transfer
Width: 200mm
Length: 0.4m
Thickness: 2mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: double-sided; glued

Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 200mm; L: 400mm; Thk: 3mm; 1.5W/mK
Type of tape: heat transfer
Width: 200mm
Length: 0.4m
Thickness: 3mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: double-sided; glued

Hersteller: AG TERMOPASTY
Category: Protection & screen coatings
Description: Varnish; transparent; liquid; 50ml; LAKIER PVB; Temp: -50÷150°C
Type of chemical agent: varnish
Colour: transparent
Appearance: liquid
Capacity: 50ml
Name: LAKIER PVB
Kind of package: bottle
Operating temperature: -50...150°C
Flash point: 380°C
Available labels languages: BG; CZ; DE; EN; FI; HU; PL; RO; RU; SK
Agent application: electronic equipment; PCBs
Application: isolation; prevening from moisture; prevents short circuits and corona discharge; prevents stray currents and short circuit; protection against corrosion
Agent features: good adhesion to metal, plastic and wood; re-soldering may be effectuated through the coating layer
Signal word: Danger
Hazard statements: H225: Highly flammable liquid and vapour.; H315: Causes skin irritation; H318: Causes serious eye damage; H336: May cause drowsiness or dizziness
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P264: Wash ...thoroughly after handling; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P312: Call a POISON CENTER or doctor/physician if you feel unwell.
GHS Code: GHS02; GHS05; GHS07

Hersteller: AG TERMOPASTY
Category: Encapsulating materials
Description: Silicone encapsulating compound; milky; Temp: -50÷200°C; 10kV/mm
Type of chemical agent: silicone encapsulating compound
Colour: milky
Application: sealing and encapsulation of electronic circuits
Shore hardness: 58
Operating temperature: -50...200°C
Density: 1.2g/cm³ @ 25°C
Dielectric strength: 10kV/mm
Mix ratio: 100:6
Bonding time: 30min
Dielectric constant: 3
Appearance: liquid
Available labels languages: BG; CZ; DE; EN; FI; FR; HU; PL; RO; RU; SK
Surface resistance: <10TΩ
Agent features: condensation cure; two-component
Signal word: Danger
Hazard statements: H226: Flammable liquid and vapour.; H319: Causes serious eye irritation; H332: Harmful if inhaled; H335: May cause respiratory irritation.; H360D: May damage the unborn child.; H372: Causes damage to organs
Precautionary statements: P202: Do not handle until all safety precautions have been read and understood.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P308 + P313: IF exposed or concerned: Get medical advice/attention.
Curing method: RTV
Net weight: 106g
GHS Code: GHS02; GHS07; GHS08

Hersteller: AG TERMOPASTY
Category: Soldering Chemicals Others
Description: Agent: soldering fluid; 100ml; WODA LUTOWNICZA
Type of chemical agent: soldering fluid
GHS Code: GHS05; GHS07; GHS09
Capacity: 0.1l
Name: WODA LUTOWNICZA
Applications of soldering equipment: for galvanized steel soldering; soft soldering; tinned elements soldering
Signal word: Danger
Hazard statements: H314: Causes severe skin burns and eye damage.; H335: May cause respiratory irritation.; H411: Toxic to aquatic life with long lasting effects
Precautionary statements: P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P271: Use only outdoors or in a well-ventilated area.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.

Hersteller: AG TERMOPASTY
Category: Cleaning & maintaining products
Description: Cleaning agent; 400ml; spray; can; Signal word: Danger
Type of chemical agent: cleaning agent
Capacity: 0.4l
Appearance: spray
Kind of package: can
Available labels languages: DE; EN; PL; RU
Application: adhesives removing; cleaning; degreasing; deposits removing; grease removing; oil removing; removing dried oils; surface preparation prior to painting
Agent application: breaks and couplings; metals
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H315: Causes skin irritation; H336: May cause drowsiness or dizziness; H361: Suspected of damaging fertility or the unborn child; H373: May cause damage to organs; H411: Toxic to aquatic life with long lasting effects
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician; P331: Do NOT induce vomiting.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02; GHS07; GHS08; GHS09

Hersteller: AG TERMOPASTY
Category: Chemicals others
Description: CO sensors tester; 0.4l; spray
Kind of package: can
Agent application: carbon monoxide users; chimney sweeping services; technical services
Type of chemical agent: CO sensors tester
Signal word: Warning
Agent features: does not pollute
GHS Code: GHS07
Hazard statements: H229: Pressurised container: May burst if heated.; H319: Causes serious eye irritation
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P251: Pressurized container: Do not pierce or burn, even after use.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P337 + P313: If eye irritation persists: Get medical advice/attention; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
Appearance: spray
Application: testing smoke detectors for correct operation
Capacity: 0.4l

Hersteller: AG TERMOPASTY
Category: Lubricants
Description: Grease; spray; can; 100ml; Signal word: Danger
Type of chemical agent: grease
Capacity: 0.1l
Appearance: spray
Kind of package: can
Application: facilitate loosening of corroded and stuck screws; increase tool life; prevening from moisture; protection against corrosion
Agent application: hinges; locks; screws; tools
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H304: May be fatal if swallowed and enters airways.
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P331: Do NOT induce vomiting.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02; GHS08
Agent features: forms a moisture displacer; leaves a thin film of oil; prevents from corrosion

Hersteller: AG TERMOPASTY
Category: Lubricants
Description: Grease; spray; can; 100ml; Application: lubrication
Type of chemical agent: grease
Capacity: 0.1l
Appearance: spray
Kind of package: can
Application: lubrication
Agent application: dampers
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H319: Causes serious eye irritation
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician; P331: Do NOT induce vomiting.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02; GHS07
Agent features: cleans and maintains; corrosion inhibitor; extends the service life; moisture repellent; reduces friction

Hersteller: AG TERMOPASTY
Category: Protection & screen coatings
Description: Varnish; transparent; liquid; 1000ml; LAKIER PVB; Temp: -50÷150°C
Appearance: liquid
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P264: Wash ...thoroughly after handling; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P312: Call a POISON CENTER or doctor/physician if you feel unwell.
Signal word: Danger
Kind of package: bottle
Colour: transparent
Available labels languages: BG; CZ; DE; EN; FI; HU; PL; RO; RU; SK
Type of chemical agent: varnish
Operating temperature: -50...150°C
Capacity: 1l
Agent application: electronic equipment; PCBs
Flash point: 380°C
GHS Code: GHS02; GHS05; GHS07
Agent features: good adhesion to metal, plastic and wood; re-soldering may be effectuated through the coating layer
Hazard statements: H225: Highly flammable liquid and vapour.; H315: Causes skin irritation; H318: Causes serious eye damage; H336: May cause drowsiness or dizziness
Application: isolation; prevening from moisture; prevents short circuits and corona discharge; prevents stray currents and short circuit; protection against corrosion
Name: LAKIER PVB

Hersteller: AG TERMOPASTY
Category: Encapsulating materials
Description: Silicone encapsulating compound; transparent; -50÷200°C; liquid
Type of chemical agent: silicone encapsulating compound
Colour: transparent
Application: sealing and encapsulation of electronic circuits
Shore hardness: 26
Operating temperature: -50...200°C
Density: 970mg/cm³
Dielectric strength: 10kV/mm
Mix ratio: 100:8
Bonding time: 40min
Dielectric constant: 3
Appearance: liquid
Available labels languages: BG; CZ; DE; EN; FI; FR; HU; PL; RO; RU; SK
Surface resistance: <10TΩ
Agent features: condensation cure; two-component
Signal word: Danger
Hazard statements: H226: Flammable liquid and vapour.; H319: Causes serious eye irritation; H332: Harmful if inhaled; H335: May cause respiratory irritation.; H360D: May damage the unborn child.; H372: Causes damage to organs
Precautionary statements: P202: Do not handle until all safety precautions have been read and understood.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P308 + P313: IF exposed or concerned: Get medical advice/attention.
Curing method: RTV
Net weight: 108g
GHS Code: GHS02; GHS07; GHS08

Hersteller: AG TERMOPASTY
Category: Encapsulating materials
Description: Silicone encapsulating compound; white; Temp: -50÷200°C; 20kV/mm
Type of chemical agent: silicone encapsulating compound
Colour: white
Application: sealing and encapsulation of electronic circuits
Shore hardness: 59
Operating temperature: -50...200°C
Thermal conductivity: 1.2W/mK
Density: 1.2g/cm³ @ 25°C
Dielectric strength: 20kV/mm
Mix ratio: 100:10
Bonding time: 30min
Dielectric constant: 3
Appearance: paste
Available labels languages: BG; CZ; DE; EN; FI; FR; HU; PL; RO; RU; SK
Surface resistance: <2410TΩ
Agent features: condensation cure; two-component
Signal word: Danger
Hazard statements: H226: Flammable liquid and vapour.; H319: Causes serious eye irritation; H332: Harmful if inhaled; H335: May cause respiratory irritation.; H360D: May damage the unborn child.; H372: Causes damage to organs
Precautionary statements: P202: Do not handle until all safety precautions have been read and understood.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P308 + P313: IF exposed or concerned: Get medical advice/attention.
Curing method: RTV
Net weight: 110g
GHS Code: GHS02; GHS07; GHS08

Hersteller: AG TERMOPASTY
Category: Encapsulating materials
Description: Silicone encapsulating compound; grey; Temp: -50÷200°C; 20kV/mm
Type of chemical agent: silicone encapsulating compound
Colour: grey
Application: sealing and encapsulation of electronic circuits
Shore hardness: 67
Operating temperature: -50...200°C
Thermal conductivity: 2W/mK
Density: 1.08g/cm³ @ 25°C
Dielectric strength: 20kV/mm
Mix ratio: 100:10
Bonding time: 30min
Dielectric constant: 3
Appearance: paste
Available labels languages: BG; CZ; DE; EN; FI; FR; HU; PL; RO; RU; SK
Surface resistance: <1750TΩ
Agent features: condensation cure; two-component
Signal word: Danger
Hazard statements: H226: Flammable liquid and vapour.; H319: Causes serious eye irritation; H332: Harmful if inhaled; H335: May cause respiratory irritation.; H360D: May damage the unborn child.; H372: Causes damage to organs
Precautionary statements: P202: Do not handle until all safety precautions have been read and understood.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P308 + P313: IF exposed or concerned: Get medical advice/attention.
Curing method: RTV
Net weight: 110g
GHS Code: GHS02; GHS07; GHS08

Hersteller: AG TERMOPASTY
Category: Encapsulating materials
Description: Silicone encapsulating compound; transparent; Temp: -50÷180°C
Type of chemical agent: silicone encapsulating compound
Colour: transparent
Application: sealing and encapsulation of electronic circuits
Operating temperature: -50...180°C
Density: 980mg/cm³ @ 25°C
Mix ratio: 3:2
Bonding time: 70min
Resistance to: UV rays
Available labels languages: BG; CZ; DE; EN; FI; FR; HU; PL; RO; RU; SK
Agent features: additive linking; two-component
Net weight: 0.1kg

Hersteller: AG TERMOPASTY
Category: Encapsulating materials
Description: Epoxy encapsulating compound; resin; Signal word: Danger
Type of chemical agent: epoxy encapsulating compound
Application: sealing and encapsulation of electronic circuits
Kind of package: can; syringe
Mix ratio: 100:10
Bonding time: 33min
Appearance: resin
Signal word: Danger
Hazard statements: H226: Flammable liquid and vapour.; H302: Harmful if swallowed.; H312: Harmful in contact with skin; H314: Causes severe skin burns and eye damage.; H315: Causes skin irritation; H317: May cause an allergic skin reaction.; H319: Causes serious eye irritation; H372: Causes damage to organs; H411: Toxic to aquatic life with long lasting effects; H412: Harmful to aquatic life with long lasting effects.
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P262: Do not get in eyes, on skin, or on clothing.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Curing method: RTV
GHS Code: GHS02; GHS05; GHS07; GHS08; GHS09

Hersteller: AG TERMOPASTY
Category: Encapsulating materials
Description: Epoxy encapsulating compound; resin; Curing method: RTV
Type of chemical agent: epoxy encapsulating compound
Application: sealing and encapsulation of electronic circuits
Kind of package: can; syringe
Mix ratio: 100:12
Bonding time: 33min
Appearance: resin
Signal word: Danger; Warning
Hazard statements: H302: Harmful if swallowed.; H312: Harmful in contact with skin; H314: Causes severe skin burns and eye damage.; H315: Causes skin irritation; H317: May cause an allergic skin reaction.; H319: Causes serious eye irritation; H411: Toxic to aquatic life with long lasting effects; H412: Harmful to aquatic life with long lasting effects.
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P262: Do not get in eyes, on skin, or on clothing.; P264: Wash ...thoroughly after handling; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Curing method: RTV
GHS Code: GHS05; GHS07; GHS09

Hersteller: AG TERMOPASTY
Category: Cleaning & maintaining products
Description: Isopropyl alcohol; KONTAKT IPA Plus; 400ml; spray; can; cleaning
Type of chemical agent: isopropyl alcohol
Name: KONTAKT IPA Plus
Capacity: 0.4l
Appearance: spray
Kind of package: can
Colour: colourless
Density: 0.79g/cm³ @ 20°C
Application: cleaning
Agent application: electronic equipment; metals; optical equipment; PCBs
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P337 + P313: If eye irritation persists: Get medical advice/attention; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02; GHS07

Hersteller: AG TERMOPASTY
Category: Cleaning & maintaining products
Description: Cleaning agent; KONTAKT S; 400ml; spray; can; Signal word: Danger
Type of chemical agent: cleaning agent
Name: KONTAKT S
Capacity: 0.4l
Appearance: spray
Kind of package: can
Application: cleaning; preservation
Agent application: electrical contacts; electronic equipment
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H315: Causes skin irritation; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness; H361f: Suspected of damaging fertility.; H373: May cause damage to organs; H412: Harmful to aquatic life with long lasting effects.
Precautionary statements: P201: Obtain special instructions before use.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician; P331: Do NOT induce vomiting.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02; GHS07; GHS08

Hersteller: AG TERMOPASTY
Category: Compressed Air and Freezers
Description: Compressed gas; can; colourless; 300ml; Compressed Gas
Signal word: Danger
Agent features: flammable
GHS Code: GHS02
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P410 + P403: Protect from sunlight. Store in a well-ventilated place.
Capacity: 0.3l
Kind of package: can
Application: cleaning; dust removing
Colour: colourless
Type of chemical agent: compressed gas
Name: Compressed Gas
Agent application: computer equipment; electronic equipment; optical equipment

Hersteller: AG TERMOPASTY
Category: Protection & screen coatings
Description: Varnish; transparent; spray; 100ml; LAKIER PVB; Temp: -50÷150°C
Type of chemical agent: varnish
Colour: transparent
Appearance: spray
Capacity: 0.1l
Name: LAKIER PVB
Kind of package: can
Operating temperature: -50...150°C
Flash point: 380°C
Agent application: electronic equipment; PCBs
Application: isolation; prevening from moisture; prevents short circuits and corona discharge; prevents stray currents and short circuit; protection against corrosion
Agent features: good adhesion to metal, plastic and wood; re-soldering may be effectuated through the coating layer
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H318: Causes serious eye damage; H336: May cause drowsiness or dizziness
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02; GHS05; GHS07

Hersteller: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; RMA; spray; can; 0.1l; 750mg/cm3@20°C
Type of flux: rosin based
Appearance: spray
Capacity: 0.1l
Soldering equipment features: easy distribution of the preparation
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H317: May cause an allergic skin reaction.; H319: Causes serious eye irritation; H412: Harmful to aquatic life with long lasting effects.
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P337 + P313: If eye irritation persists: Get medical advice/attention; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02; GHS07
Name: LAKIER TOPNIK LT-4
Conform to the norm: PN EN 29454 1.1.1.A.
Density: 0.75g/cm³ @ 20°C
Kind of package: can
Applications of soldering equipment: PCB protection against oxidation; soldering of heavily oxidized surfaces
Kind of flux: RMA

Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 13mm; L: 18mm; Thk: 0.3mm; 1.5W/mK; 5pcs.
Type of tape: heat transfer
Width: 13mm
Length: 18mm
Thickness: 0.3mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: double-sided; glued
Quantity in set/package: 5pcs.

Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 18mm; L: 23mm; Thk: 0.3mm; 1.5W/mK
Version: double-sided; glued
Tape application: facilitates heat transfer; heatsink mounting
Type of tape: heat transfer
Thickness: 0.3mm
Width: 18mm
Length: 23mm
Thermal conductivity: 1.5W/mK

Hersteller: AG TERMOPASTY
Category: Soldering Chemicals Others
Description: Agent: soldering acid; for difficult to tin nickel surfaces
Signal word: Danger
Application: for difficult to tin nickel surfaces
GHS Code: GHS05; GHS07
Hazard statements: H302: Harmful if swallowed.; H314: Causes severe skin burns and eye damage.
Name: KWAS LUTOWNICZY
Precautionary statements: P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P405: Store locked up.
Type of chemical agent: soldering acid
Capacity: 0.1l

Hersteller: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; grey; stainless steel particles,silicone
Application: facilitates heat transfer
GHS Code: GHS09
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Agent application: heatsinks
Type of chemical agent: heat transfer paste
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Appearance: paste
Grease ingredients: silicone; stainless steel particles
Signal word: Warning
Operating temperature: -50...250°C
Net weight: 0.1kg
Thermal conductivity: 6W/mK
Name: AG EXTREME
Colour: grey
Kind of package: plastic container

Hersteller: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; halide-free,Lead Free,No Clean; liquid; 50ml
Type of flux: rosin based
Kind of flux: halide-free; Lead Free; No Clean
Appearance: liquid
Kind of package: bottle
Capacity: 50ml
Soldering equipment features: can be washed down with alcohol based agents
Solids content: 0...5%
Density: 794mg/cm³ @ 25°C
Signal word: Danger
Hazard statements: H225: Highly flammable liquid and vapour.; H304: May be fatal if swallowed and enters airways.; H317: May cause an allergic skin reaction.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P235: Keep cool.; P241: Use explosion-proof electrical/ventilating/lighting/.../equipment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P331: Do NOT induce vomiting.; P501: Dispose of contents/container to ...
GHS Code: GHS02; GHS07; GHS08
Flux residues: non-corrosive

Hersteller: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; No Clean; liquid; pen; 8ml; 860mg/cm3@20°C
Type of flux: rosin based
Appearance: liquid
Capacity: 8ml
Soldering equipment features: can be washed down with alcohol based agents
Signal word: Danger
Hazard statements: H225: Highly flammable liquid and vapour.; H317: May cause an allergic skin reaction.; H318: Causes serious eye damage; H336: May cause drowsiness or dizziness; H373: May cause damage to organs
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P370 + P378: In case of fire: Use ...for extinction.
GHS Code: GHS02; GHS05; GHS07; GHS08
Flux name: SW26
Name: TK83
Conform to the norm: PN EN 29454
Solids content: 24%
Density: 860mg/cm³ @ 20°C
Kind of package: pen
Applications of soldering equipment: tinning elements coated with polyurethane varnishes
Kind of flux: No Clean

Hersteller: AG TERMOPASTY
Category: Chemicals others
Description: Electrically conductive rubber; black; W: 50mm; L: 50mm; Thk: 0.5mm
Length: 50mm
Name: GUMA ELEKTROPRZEWODZĄCA
Agent features: electrically conductive
Type of chemical agent: electrically conductive rubber
Thickness: 0.5mm
Width: 50mm
Colour: black
Application: calculators; control boards; for computer; for notebooks

Hersteller: AG TERMOPASTY
Category: Cleaning & maintaining products
Description: Isopropyl alcohol; KONTAKT IPA Plus; 500ml; liquid; colourless
Colour: colourless
Capacity: 0.5l
Density: 0.79g/cm³ @ 20°C
Kind of package: bottle with atomizer
Application: cleaning
Signal word: Danger
Agent application: electronic equipment; metals; optical equipment; PCBs
GHS Code: GHS02; GHS07
Hazard statements: H225: Highly flammable liquid and vapour.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness
Type of chemical agent: isopropyl alcohol
Name: KONTAKT IPA Plus
Appearance: liquid
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P233: Keep container tightly closed.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P312: Call a POISON CENTER or doctor/physician if you feel unwell.; P370 + P378: In case of fire: Use ...for extinction.

Hersteller: AG TERMOPASTY
Category: Soldering Chemicals Others
Description: Agent: soldering acid; for difficult to tin nickel surfaces
Signal word: Danger
Application: for difficult to tin nickel surfaces
GHS Code: GHS05; GHS07
Hazard statements: H302: Harmful if swallowed.; H314: Causes severe skin burns and eye damage.
Name: KWAS LUTOWNICZY
Precautionary statements: P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P405: Store locked up.
Type of chemical agent: soldering acid
Capacity: 50ml

Hersteller: AG TERMOPASTY
Category: Cleaning & maintaining products
Description: Cleaning agent; KONTAKT PR; 400ml; spray; can; Signal word: Danger
Type of chemical agent: cleaning agent
Name: KONTAKT PR
Capacity: 0.4l
Appearance: spray
Kind of package: can
Application: cleaning; lubrication; regeneration
Agent application: potentiometers
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P251: Pressurized container: Do not pierce or burn, even after use.; P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician; P331: Do NOT induce vomiting.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02; GHS07

Hersteller: AG TERMOPASTY
Category: Encapsulating materials
Description: Silicone encapsulating compound; white; Temp: -50÷200°C; 20kV/mm
Type of chemical agent: silicone encapsulating compound
Colour: white
Application: sealing and encapsulation of electronic circuits
Operating temperature: -50...200°C
Density: 1.2g/cm³ @ 25°C
Mix ratio: 100:10
Bonding time: 30min
Agent features: condensation cure; two-component
Net weight: 1kg
Appearance: paste
Precautionary statements: P202: Do not handle until all safety precautions have been read and understood.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P308 + P313: IF exposed or concerned: Get medical advice/attention.
Curing method: RTV
Thermal conductivity: 1.2W/mK
Dielectric constant: 3
Shore hardness: 59
Dielectric strength: 20kV/mm
Surface resistance: <2410TΩ
Available labels languages: BG; CZ; EN; ES; FI; FR; HU; IT; PL; RO; SK
Signal word: Danger
GHS Code: GHS02; GHS07; GHS08
Hazard statements: H226: Flammable liquid and vapour.; H319: Causes serious eye irritation; H332: Harmful if inhaled; H335: May cause respiratory irritation.; H360D: May damage the unborn child.; H372: Causes damage to organs

Hersteller: AG TERMOPASTY
Category: Encapsulating materials
Description: Silicone encapsulating compound; transparent; Temp: -50÷180°C
Type of chemical agent: silicone encapsulating compound
Colour: transparent
Application: sealing and encapsulation of electronic circuits
Operating temperature: -50...180°C
Density: 980mg/cm³ @ 25°C
Mix ratio: 3:2
Bonding time: 70min
Resistance to: UV rays
Agent features: additive linking; two-component
Net weight: 1kg

Hersteller: AG TERMOPASTY
Category: Soldering Chemicals Others
Description: Gas: butane; 200ml; can; for gas soldering iron
Agent features: universal filling valve
Precautionary statements: P102: Keep out of reach of children.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
Capacity: 0.2l
Kind of package: can
Type of gas: butane
Signal word: Danger
Applications of soldering equipment: for gas soldering iron
GHS Code: GHS02
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.

Hersteller: AG TERMOPASTY
Category: Cleaning & maintaining products
Description: Isopropyl alcohol; KONTAKT IPA Plus; 250ml; liquid; colourless
Type of chemical agent: isopropyl alcohol
Colour: colourless
Application: cleaning
Density: 0.79g/cm³ @ 20°C
Name: KONTAKT IPA Plus
Appearance: liquid
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P233: Keep container tightly closed.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P312: Call a POISON CENTER or doctor/physician if you feel unwell.; P370 + P378: In case of fire: Use ...for extinction.
Capacity: 0.25l
Kind of package: bottle with atomizer
Signal word: Danger
Agent application: electronic equipment; metals; optical equipment; PCBs
GHS Code: GHS02; GHS07
Hazard statements: H225: Highly flammable liquid and vapour.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness