Produkte > AG TERMOPASTY > Alle Produkte des Herstellers AG TERMOPASTY (569) > Seite 4 nach 10
| Foto | Bezeichnung | Hersteller | Beschreibung | Verfügbarkeit | Privatkunde | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
 |
ART.AGT-224 | AG TERMOPASTY |
Category: Encapsulating materialsDescription: Epoxy encapsulating compound; resin; Curing method: RTV Type of chemical agent: epoxy encapsulating compound Application: sealing and encapsulation of electronic circuits Kind of package: can; syringe Mix ratio: 100:12 Bonding time: 33min Appearance: resin Signal word: Danger; Warning Hazard statements: H302: Harmful if swallowed.; H312: Harmful in contact with skin; H314: Causes severe skin burns and eye damage.; H315: Causes skin irritation; H317: May cause an allergic skin reaction.; H319: Causes serious eye irritation; H411: Toxic to aquatic life with long lasting effects; H412: Harmful to aquatic life with long lasting effects. Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P262: Do not get in eyes, on skin, or on clothing.; P264: Wash ...thoroughly after handling; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Curing method: RTV GHS Code: GHS05; GHS07; GHS09 |
auf Bestellung 18 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
  |
ART.AGT-225 | AG TERMOPASTY |
Category: Cleaning & maintaining products Description: Isopropyl alcohol; KONTAKT IPA Plus; 400ml; spray; can; cleaning Type of chemical agent: isopropyl alcohol Capacity: 0.4l Appearance: spray Kind of package: can Application: cleaning Agent application: electronic equipment; metals; optical equipment; PCBs Signal word: Danger Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P337 + P313: If eye irritation persists: Get medical advice/attention; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F. GHS Code: GHS02; GHS07 Density: 0.79g/cm3 @ 20°C Colour: colourless Name: KONTAKT IPA Plus |
auf Bestellung 382 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
   |
ART.AGT-226 | AG TERMOPASTY |
Category: Cleaning & maintaining products Description: Cleaning agent; 400ml; spray; can; Signal word: Danger Type of chemical agent: cleaning agent Capacity: 0.4l Appearance: spray Kind of package: can Application: cleaning; degreasing; flux removing; protection against corrosion Agent application: electrical contacts; PCBs Signal word: Danger Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H315: Causes skin irritation; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness; H361f: Suspected of damaging fertility.; H373: May cause damage to organs; H412: Harmful to aquatic life with long lasting effects. Precautionary statements: P201: Obtain special instructions before use.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F. GHS Code: GHS02; GHS07; GHS08 |
auf Bestellung 75 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
   |
ART.AGT-227 | AG TERMOPASTY |
Category: Cleaning & maintaining products Description: Cleaning agent; KONTAKT S; 400ml; spray; can; Signal word: Danger Type of chemical agent: cleaning agent Capacity: 0.4l Appearance: spray Kind of package: can Application: cleaning; preservation Agent application: electrical contacts; electronic equipment Signal word: Danger Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H315: Causes skin irritation; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness; H361f: Suspected of damaging fertility.; H373: May cause damage to organs; H412: Harmful to aquatic life with long lasting effects. Precautionary statements: P201: Obtain special instructions before use.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician; P331: Do NOT induce vomiting.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F. GHS Code: GHS02; GHS07; GHS08 Name: KONTAKT S |
auf Bestellung 31 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
  |
ART.AGT-228 | AG TERMOPASTY |
Category: Protection & screen coatings Description: Protective coating; colourless; spray; 400ml; Signal word: Danger Type of chemical agent: protective coating Capacity: 0.4l Appearance: spray Application: extrusion of plastics; production of plastic laminates; vacuum forming of plastics Signal word: Danger Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated. Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F. GHS Code: GHS02 Agent features: anti adhesive; glidant Colour: colourless Name: ROZDZIELACZ BEZSILIKONOWY DO FORM |
auf Bestellung 6 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
   |
ART.AGT-229 | AG TERMOPASTY |
Category: Compressed Air and Freezers Description: Compressed gas; can; colourless; 300ml; Compressed Gas Colour: colourless Type of chemical agent: compressed gas Name: Compressed Gas Agent application: computer equipment; electronic equipment; optical equipment Signal word: Danger Agent features: flammable GHS Code: GHS02 Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated. Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P410 + P403: Protect from sunlight. Store in a well-ventilated place. Capacity: 0.3l Kind of package: can Application: cleaning; dust removing |
auf Bestellung 40 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
  |
ART.AGT-232 | AG TERMOPASTY |
Category: Protection & screen coatings Description: Varnish; transparent; spray; 100ml; LAKIER PVB; Temp: -50÷150°C Type of chemical agent: varnish Application: isolation; prevening from moisture; prevents short circuits and corona discharge; prevents stray currents and short circuit; protection against corrosion Kind of package: can Appearance: spray Signal word: Danger Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H318: Causes serious eye damage; H336: May cause drowsiness or dizziness Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F. GHS Code: GHS02; GHS05; GHS07 Operating temperature: -50...150°C Capacity: 0.1l Flash point: 380°C Colour: transparent Agent features: good adhesion to metal, plastic and wood; re-soldering may be effectuated through the coating layer Name: LAKIER PVB Agent application: electronic equipment; PCBs |
auf Bestellung 138 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
ART.AGT-233 | AG TERMOPASTY |
Category: Compressed Air and Freezers Description: Compressed gas; can; colourless; 600ml; Compressed Gas Type of chemical agent: compressed gas Application: cleaning; dust removing Kind of package: can Signal word: Danger Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated. Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F. GHS Code: GHS02 Capacity: 0.6l Colour: colourless Agent features: flammable Name: Compressed Gas Agent application: computer equipment; electronic equipment; optical equipment |
auf Bestellung 266 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
  |
ART.AGT-235 | AG TERMOPASTY |
Category: Fluxes Description: Flux: rosin based; RMA; spray; can; 0.1l; 750mg/cm3@20°C Type of flux: rosin based Appearance: spray Capacity: 0.1l Soldering equipment features: easy distribution of the preparation Signal word: Danger Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H317: May cause an allergic skin reaction.; H319: Causes serious eye irritation; H412: Harmful to aquatic life with long lasting effects. Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P337 + P313: If eye irritation persists: Get medical advice/attention; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F. GHS Code: GHS02; GHS07 Conform to the norm: PN EN 29454 1.1.1.A. Density: 0.75g/cm3 @ 20°C Name: LAKIER TOPNIK LT-4 Applications of soldering equipment: PCB protection against oxidation; soldering of heavily oxidized surfaces Kind of package: can Kind of flux: RMA |
auf Bestellung 13 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
ART.AGT-237 | AG TERMOPASTY |
Category: Cleaning & maintaining products Description: Cleaner; 0.1l; spray; can; flux removing,impurities removing Type of chemical agent: cleaner Capacity: 0.1l Appearance: spray Kind of package: can Application: flux removing; impurities removing Agent application: PCBs Agent features: based on alcohol Signal word: Danger Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness; H412: Harmful to aquatic life with long lasting effects. Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P271: Use only outdoors or in a well-ventilated area.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F. GHS Code: GHS02; GHS07 |
auf Bestellung 14 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
ART.AGT-238 | AG TERMOPASTY |
Category: Cleaning & maintaining products Description: Cleaner; 0.4l; spray; can; flux removing,impurities removing Type of chemical agent: cleaner Application: flux removing; impurities removing Kind of package: can Appearance: spray Signal word: Danger Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness; H412: Harmful to aquatic life with long lasting effects. Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P271: Use only outdoors or in a well-ventilated area.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F. GHS Code: GHS02; GHS07 Capacity: 0.4l Agent features: based on alcohol Agent application: PCBs |
auf Bestellung 316 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
ART.AGT-240 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 28.2mm; L: 41.5mm; Thk: 0.3mm; 1.5W/mK; 5pcs. Type of tape: heat transfer Width: 28.2mm Length: 41.5mm Thickness: 0.3mm Thermal conductivity: 1.5W/mK Tape application: facilitates heat transfer; heatsink mounting Version: double-sided; glued Quantity in set/package: 5pcs. |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||
 |
ART.AGT-241 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 13mm; L: 18mm; Thk: 0.3mm; 1.5W/mK; 5pcs. Type of tape: heat transfer Width: 13mm Length: 18mm Thickness: 0.3mm Thermal conductivity: 1.5W/mK Tape application: facilitates heat transfer; heatsink mounting Version: double-sided; glued Quantity in set/package: 5pcs. |
auf Bestellung 19 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
  |
ART.AGT-242 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 18mm; L: 23mm; Thk: 0.3mm; 1.5W/mK Type of tape: heat transfer Width: 18mm Length: 23mm Thickness: 0.3mm Thermal conductivity: 1.5W/mK Tape application: facilitates heat transfer; heatsink mounting Version: double-sided; glued |
auf Bestellung 29 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
ART.AGT-243 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 25mm; L: 26mm; Thk: 0.3mm; 1.5W/mK; 5pcs. Type of tape: heat transfer Width: 25mm Length: 26mm Thickness: 0.3mm Thermal conductivity: 1.5W/mK Tape application: facilitates heat transfer; heatsink mounting Version: double-sided; glued Quantity in set/package: 5pcs. |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||
   |
ART.AGT-246 | AG TERMOPASTY |
Category: Soldering Chemicals Others Description: Agent: soldering acid; for difficult to tin nickel surfaces Type of chemical agent: soldering acid Application: for difficult to tin nickel surfaces Signal word: Danger Hazard statements: H302: Harmful if swallowed.; H314: Causes severe skin burns and eye damage. Precautionary statements: P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P405: Store locked up. GHS Code: GHS05; GHS07 Capacity: 0.1l Name: KWAS LUTOWNICZY |
auf Bestellung 22 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
    |
ART.AGT-247 | AG TERMOPASTY |
Category: Heat conductive compounds Description: Heat transfer paste; grey; stainless steel particles,silicone Type of chemical agent: heat transfer paste Colour: grey Thermal conductivity: 6W/mK Kind of package: plastic container Net weight: 0.1kg Signal word: Warning Operating temperature: -50...250°C Name: AG EXTREME Grease ingredients: silicone; stainless steel particles Agent application: heatsinks Application: facilitates heat transfer GHS Code: GHS09 Hazard statements: H410: Very toxic to aquatic life with long lasting effects. Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ... Appearance: paste |
auf Bestellung 34 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
ART.AGT-248 | AG TERMOPASTY |
Category: Fluxes Description: Flux: rosin based; halide-free,Lead Free,No Clean,ROL0; liquid Type of flux: rosin based Kind of flux: halide-free; Lead Free; No Clean; ROL0 Appearance: liquid Kind of package: bottle Capacity: 50ml Soldering equipment features: can be washed down with alcohol based agents Solids content: 0...5% Density: 794mg/cm3 @ 25°C Colour: amber Signal word: Danger Hazard statements: H225: Highly flammable liquid and vapour.; H304: May be fatal if swallowed and enters airways.; H317: May cause an allergic skin reaction.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P235: Keep cool.; P241: Use explosion-proof electrical/ventilating/lighting/.../equipment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P331: Do NOT induce vomiting.; P501: Dispose of contents/container to ... GHS Code: GHS02; GHS07; GHS08 Flux residues: non-corrosive |
auf Bestellung 142 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
ART.AGT-249 | AG TERMOPASTY |
Category: Fluxes Description: Flux: rosin based; halide-free,No Clean,ROL0; liquid; pen; 8ml Type of flux: rosin based Appearance: liquid Capacity: 8ml Soldering equipment features: can be washed down with alcohol based agents Signal word: Danger Hazard statements: H225: Highly flammable liquid and vapour.; H317: May cause an allergic skin reaction.; H318: Causes serious eye damage; H336: May cause drowsiness or dizziness; H373: May cause damage to organs Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P370 + P378: In case of fire: Use ...for extinction. GHS Code: GHS02; GHS05; GHS07; GHS08 Flux name: SW26 Conform to the norm: PN EN 29454 Solids content: 24% Density: 860mg/cm3 @ 20°C Name: TK83 Colour: amber Applications of soldering equipment: tinning elements coated with polyurethane varnishes Kind of package: pen Kind of flux: halide-free; No Clean; ROL0 |
auf Bestellung 59 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
ART.AGT-250 | AG TERMOPASTY |
Category: Chemicals others Description: Electrically conductive rubber; black; W: 50mm; L: 50mm; Thk: 0.5mm Type of chemical agent: electrically conductive rubber Colour: black Name: GUMA ELEKTROPRZEWODZĄCA Agent features: electrically conductive Application: calculators; control boards; for computer; for notebooks Width: 50mm Length: 50mm Thickness: 0.5mm |
auf Bestellung 35 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
ART.AGT-251 | AG TERMOPASTY |
Category: Chemicals others Description: Electrically conductive rubber; black; W: 50mm; L: 150mm Type of chemical agent: electrically conductive rubber Colour: black Agent features: electrically conductive Length: 0.15m Width: 50mm Name: GUMA ELEKTROPRZEWODZĄCA Application: calculators; control boards; for computer; for notebooks Thickness: 0.5mm |
auf Bestellung 7 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
ART.AGT-252 | AG TERMOPASTY |
Category: Cleaning & maintaining products Description: Isopropyl alcohol; KONTAKT IPA Plus; 500ml; liquid; colourless Kind of package: bottle with atomizer Application: cleaning Signal word: Danger Agent application: electronic equipment; metals; optical equipment; PCBs GHS Code: GHS02; GHS07 Hazard statements: H225: Highly flammable liquid and vapour.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness Type of chemical agent: isopropyl alcohol Name: KONTAKT IPA Plus Appearance: liquid Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P233: Keep container tightly closed.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P312: Call a POISON CENTER or doctor/physician if you feel unwell.; P370 + P378: In case of fire: Use ...for extinction. Capacity: 0.5l Density: 0.79g/cm3 @ 20°C Colour: colourless |
auf Bestellung 311 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
   |
ART.AGT-253 | AG TERMOPASTY |
Category: Soldering Chemicals Others Description: Agent: soldering acid; for difficult to tin nickel surfaces Type of chemical agent: soldering acid Application: for difficult to tin nickel surfaces Signal word: Danger Hazard statements: H302: Harmful if swallowed.; H314: Causes severe skin burns and eye damage. Precautionary statements: P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P405: Store locked up. GHS Code: GHS05; GHS07 Capacity: 50ml Name: KWAS LUTOWNICZY |
auf Bestellung 19 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
   |
ART.AGT-254 | AG TERMOPASTY |
Category: Cleaning & maintaining products Description: Cleaning agent; KONTAKT PR; 400ml; spray; can; Signal word: Danger Type of chemical agent: cleaning agent Capacity: 0.4l Appearance: spray Kind of package: can Application: cleaning; lubrication; regeneration Agent application: potentiometers Signal word: Danger Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P251: Pressurized container: Do not pierce or burn, even after use.; P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician; P331: Do NOT induce vomiting.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F. GHS Code: GHS02; GHS07 Name: KONTAKT PR |
auf Bestellung 5 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
ART.AGT-256 | AG TERMOPASTY |
Category: Cleaning & maintaining products Description: Cleaning cloth: cleaning set; SMARTGEL; 0.25l Capacity: 0.25l Application: dust removing; impurities removing Name: SMARTGEL Kit contents: cleaning fluid; microfiber cloth Type of cleaning cloth: cleaning set Agent application: computer equipment; LCD/TFT displays; office equipment |
auf Bestellung 18 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
  |
ART.AGT-257 | AG TERMOPASTY |
Category: Wipes & cleaning clothes Description: Cleaning cloth: cloth; microfiber; 5pcs; 300x300mm; cleaning; dry Type of cleaning cloth: cloth Material: microfiber Quantity in set/package: 5pcs. Cloth dimensions: 300x300mm Application: cleaning Agent application: computer equipment; office equipment Version: dry |
auf Bestellung 9 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
ART.AGT-262 | AG TERMOPASTY |
Category: Encapsulating materials Description: Silicone encapsulating compound; white; Temp: -50÷200°C; 20kV/mm Type of chemical agent: silicone encapsulating compound Colour: white Application: sealing and encapsulation of electronic circuits Shore hardness: 59 Operating temperature: -50...200°C Thermal conductivity: 1.2W/mK Density: 1.2g/cm3 @ 25°C Dielectric strength: 20kV/mm Mix ratio: 100:10 Bonding time: 30min Appearance: paste Surface resistance: <2410TΩ Agent features: condensation cure; two-component Net weight: 1kg Precautionary statements: P202: Do not handle until all safety precautions have been read and understood.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P308 + P313: IF exposed or concerned: Get medical advice/attention. Curing method: RTV Dielectric constant: 3 Available labels languages: BG; CZ; EN; ES; FI; FR; HU; IT; PL; RO; SK Signal word: Danger GHS Code: GHS02; GHS07; GHS08 Hazard statements: H226: Flammable liquid and vapour.; H319: Causes serious eye irritation; H332: Harmful if inhaled; H335: May cause respiratory irritation.; H360D: May damage the unborn child.; H372: Causes damage to organs |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||
 |
ART.AGT-264 | AG TERMOPASTY |
Category: Encapsulating materials Description: Silicone encapsulating compound; transparent; Temp: -50÷180°C Type of chemical agent: silicone encapsulating compound Colour: transparent Application: sealing and encapsulation of electronic circuits Operating temperature: -50...180°C Density: 980mg/cm3 @ 25°C Mix ratio: 3:2 Bonding time: 70min Agent features: additive linking; two-component Net weight: 1kg Resistance to: UV rays |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||
 |
ART.AGT-266 | AG TERMOPASTY |
Category: Soldering Chemicals Others Description: Gas: butane; 200ml; can; for gas soldering iron Capacity: 0.2l Kind of package: can Signal word: Danger Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated. Precautionary statements: P102: Keep out of reach of children.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F. GHS Code: GHS02 Agent features: universal filling valve Type of gas: butane Applications of soldering equipment: for gas soldering iron |
auf Bestellung 315 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
  |
ART.AGT-267 | AG TERMOPASTY |
Category: Cleaning & maintaining products Description: Isopropyl alcohol; KONTAKT IPA Plus; 250ml; liquid; colourless Kind of package: bottle with atomizer Application: cleaning Signal word: Danger Agent application: electronic equipment; metals; optical equipment; PCBs GHS Code: GHS02; GHS07 Hazard statements: H225: Highly flammable liquid and vapour.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness Type of chemical agent: isopropyl alcohol Name: KONTAKT IPA Plus Appearance: liquid Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P233: Keep container tightly closed.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P312: Call a POISON CENTER or doctor/physician if you feel unwell.; P370 + P378: In case of fire: Use ...for extinction. Capacity: 0.25l Density: 0.79g/cm3 @ 20°C Colour: colourless |
auf Bestellung 154 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
  |
ART.AGT-268 | AG TERMOPASTY |
Category: Fluxes Description: Flux: rosin based; halide-free,No Clean,ROL0; resin; 1000g Type of flux: rosin based Appearance: resin Soldering equipment features: activated with adipic acid (2,5%) Signal word: Warning Hazard statements: H317: May cause an allergic skin reaction. Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P272: Contaminated work clothing should not be allowed out of the workplace.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P363: Wash contaminated clothing before reuse; P501: Dispose of contents/container to ... GHS Code: GHS07 Net weight: 1kg Flux residues: amber; yes Kind of package: plastic container Kind of flux: halide-free; No Clean; ROL0 |
auf Bestellung 4 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
  |
ART.AGT-270 | AG TERMOPASTY |
Category: Wipes & cleaning clothes Description: Cleaning cloth: cleaning sticks; 20pcs; L: 122mm; dust free Type of cleaning cloth: cleaning sticks Quantity in set/package: 20pcs. Length: 122mm Application: keybord cleaning swabs; precise cleaning operations Version: single sided Length of cleaning swab: 25mm Handle material: polypropylene Tip material: polyurethane Width of cleaning swab: 15.5mm Agent features: does not scratch surfaces; dust free |
auf Bestellung 7 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
  |
ART.AGT-272 | AG TERMOPASTY |
Category: Soldering Chemicals Others Description: Agent: soldering acid; for difficult to tin nickel surfaces Type of chemical agent: soldering acid Application: for difficult to tin nickel surfaces Signal word: Danger Hazard statements: H302: Harmful if swallowed.; H314: Causes severe skin burns and eye damage. Precautionary statements: P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P405: Store locked up. GHS Code: GHS05; GHS07 Capacity: 0.5l Name: KWAS LUTOWNICZY |
auf Bestellung 11 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
ART.AGT-293 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.3mm; 1.5W/mK; glueless Type of tape: heat transfer Width: 20mm Length: 0.13m Thickness: 0.3mm Thermal conductivity: 1.5W/mK Tape application: facilitates heat transfer; heatsink mounting Version: glueless |
auf Bestellung 10 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
  |
ART.AGT-294 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.3mm; 1.5W/mK; glueless Type of tape: heat transfer Width: 30mm Length: 30mm Thickness: 0.3mm Thermal conductivity: 1.5W/mK Tape application: facilitates heat transfer; heatsink mounting Version: glueless |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||
  |
ART.AGT-296 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.3mm; 2.4W/mK; glueless Type of tape: heat transfer Width: 20mm Length: 0.13m Thickness: 0.3mm Thermal conductivity: 2.4W/mK Tape application: facilitates heat transfer; heatsink mounting Version: glueless |
auf Bestellung 35 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
  |
ART.AGT-297 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.3mm; 2.4W/mK; glueless Type of tape: heat transfer Width: 30mm Length: 30mm Thickness: 0.3mm Thermal conductivity: 2.4W/mK Tape application: facilitates heat transfer; heatsink mounting Version: glueless |
auf Bestellung 19 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
  |
ART.AGT-299 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.5mm; 1.5W/mK; glueless Type of tape: heat transfer Width: 20mm Length: 0.13m Thickness: 0.5mm Thermal conductivity: 1.5W/mK Tape application: facilitates heat transfer; heatsink mounting Version: glueless |
auf Bestellung 4 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
  |
ART.AGT-300 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.5mm; 1.5W/mK; glueless Type of tape: heat transfer Width: 30mm Length: 30mm Thickness: 0.5mm Thermal conductivity: 1.5W/mK Tape application: facilitates heat transfer; heatsink mounting Version: glueless |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||
 |
ART.AGT-301 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 200mm; L: 400mm; Thk: 0.5mm; 2.4W/mK Type of tape: heat transfer Width: 200mm Length: 0.4m Thickness: 0.5mm Thermal conductivity: 2.4W/mK Tape application: facilitates heat transfer; heatsink mounting Version: glueless |
auf Bestellung 4 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
  |
ART.AGT-302 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.5mm; 2.4W/mK; glueless Type of tape: heat transfer Width: 20mm Length: 0.13m Thickness: 0.5mm Thermal conductivity: 2.4W/mK Tape application: facilitates heat transfer; heatsink mounting Version: glueless |
auf Bestellung 4 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
  |
ART.AGT-303 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.5mm; 2.4W/mK Type of tape: heat transfer Width: 30mm Length: 30mm Thickness: 0.5mm Thermal conductivity: 2.4W/mK Tape application: facilitates heat transfer; heatsink mounting Version: double-sided; glueless |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||
  |
ART.AGT-305 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.5mm; 6W/mK; glueless Type of tape: heat transfer Width: 20mm Length: 0.13m Thickness: 0.5mm Thermal conductivity: 6W/mK Tape application: facilitates heat transfer; heatsink mounting Version: glueless |
auf Bestellung 75 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
ART.AGT-306 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.5mm; 6W/mK; glueless Type of tape: heat transfer Width: 30mm Length: 30mm Thickness: 0.5mm Thermal conductivity: 6W/mK Tape application: facilitates heat transfer; heatsink mounting Version: glueless |
auf Bestellung 60 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
ART.AGT-307 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 200mm; L: 400mm; Thk: 0.5mm; 6W/mK; glueless Type of tape: heat transfer Width: 200mm Length: 0.4m Thickness: 0.5mm Thermal conductivity: 6W/mK Tape application: facilitates heat transfer; heatsink mounting Version: glueless |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||
   |
ART.AGT-309 | AG TERMOPASTY |
Category: Heat conductive compounds Description: Heat transfer paste; white; silicon based,do not conduct; 800g Type of chemical agent: heat transfer paste Colour: white Agent features: do not conduct; silicon based Thermal conductivity: 0.88W/mK Kind of package: cartridge Net weight: 0.8kg Signal word: Warning Operating temperature: -50...250°C Density: 2.7g/cm3 @ 20°C Dielectric constant: 4.7 Flash point: 350°C Name: PASTA SILIKONOWA H2 Agent application: electronic equipment; heatsinks; Household equipment Application: facilitates heat transfer GHS Code: GHS09 Hazard statements: H410: Very toxic to aquatic life with long lasting effects. Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ... Appearance: paste |
auf Bestellung 10 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
   |
ART.AGT-311 | AG TERMOPASTY |
Category: Heat conductive compounds Description: Heat transfer paste; white; silicon based,do not conduct; 400g Type of chemical agent: heat transfer paste Colour: white Agent features: do not conduct; silicon based Thermal conductivity: 0.88W/mK Kind of package: cartridge Net weight: 400g Signal word: Warning Operating temperature: -50...250°C Density: 1.37g/cm3 @ 20°C Dielectric constant: 4.7 Flash point: 350°C Name: PASTA SILIKONOWA H3 Agent application: heatsinks Application: facilitates heat transfer GHS Code: GHS09 Hazard statements: H410: Very toxic to aquatic life with long lasting effects. Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ... Appearance: paste |
auf Bestellung 12 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
ART.AGT-314 | AG TERMOPASTY |
Category: Encapsulating materials Description: Silicone encapsulating compound; white; -50÷180°C; 1.2g/cm3 Type of chemical agent: silicone encapsulating compound Colour: white Application: sealing and encapsulation of electronic circuits Shore hardness: 20 Operating temperature: -50...180°C Thermal conductivity: 1.5W/mK Density: 1.2g/cm3 Dielectric strength: 14.4kV/mm Mix ratio: 1:1 Bonding time: 70min Appearance: liquid Surface resistance: <22TΩ Agent features: condensation cure; two-component Net weight: 1kg |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||
 |
ART.AGT-315 | AG TERMOPASTY |
Category: Encapsulating materials Description: Silicone encapsulating compound; transparent; 50÷180°C; 11kV/mm Type of chemical agent: silicone encapsulating compound Colour: transparent Application: sealing and encapsulation of electronic circuits Shore hardness: 12 Operating temperature: 50...180°C Density: 980mg/cm3 Dielectric strength: 11kV/mm Mix ratio: 3:2 Bonding time: 60min Appearance: liquid Surface resistance: <480TΩ Agent features: condensation cure; two-component Net weight: 0.1kg |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||
 |
ART.AGT-316 | AG TERMOPASTY |
Category: Encapsulating materials Description: Silicone encapsulating compound; transparent; 50÷180°C; 11kV/mm Type of chemical agent: silicone encapsulating compound Colour: transparent Application: sealing and encapsulation of electronic circuits Shore hardness: 12 Operating temperature: 50...180°C Density: 980mg/cm3 Dielectric strength: 11kV/mm Mix ratio: 3:2 Bonding time: 60min Appearance: liquid Surface resistance: <480TΩ Agent features: condensation cure; two-component Net weight: 1kg |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||
 |
ART.AGT-317 | AG TERMOPASTY |
Category: Encapsulating materials Description: Silicone encapsulating compound; white; -50÷180°C; 1.2g/cm3 Type of chemical agent: silicone encapsulating compound Colour: white Application: sealing and encapsulation of electronic circuits Shore hardness: 20 Operating temperature: -50...180°C Thermal conductivity: 1.5W/mK Density: 1.2g/cm3 Dielectric strength: 14.4kV/mm Mix ratio: 1:1 Bonding time: 70min Appearance: liquid Surface resistance: <22TΩ Agent features: condensation cure; two-component Net weight: 0.1kg |
auf Bestellung 11 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
ART.AGT-318 | AG TERMOPASTY |
Category: Heat conductive compounds Description: Heat transfer paste; white; silicon based,do not conduct; 5kg Type of chemical agent: heat transfer paste Colour: white Application: facilitates heat transfer Operating temperature: -50...250°C Thermal conductivity: 0.88W/mK Density: 2.7g/cm3 @ 20°C Appearance: paste Agent features: do not conduct; silicon based Net weight: 5kg Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ... Name: PASTA SILIKONOWA H2 Dielectric constant: 4.7 Flash point: 350°C Kind of package: bucket Signal word: Warning Agent application: electronic equipment; heatsinks; Household equipment GHS Code: GHS09 Hazard statements: H410: Very toxic to aquatic life with long lasting effects. |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||||
 |
ART.AGT-323 | AG TERMOPASTY |
Category: Fluxes Description: Flux: rosin-free; Water Soluble; liquid; bottle; 0.05l; Flux: SW13 Type of flux: rosin-free Appearance: liquid Capacity: 50ml Soldering equipment features: corrosive Signal word: Danger Hazard statements: H302: Harmful if swallowed.; H314: Causes severe skin burns and eye damage.; H317: May cause an allergic skin reaction.; H335: May cause respiratory irritation.; H412: Harmful to aquatic life with long lasting effects. Precautionary statements: P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician. GHS Code: GHS05; GHS07 Flux name: SW13 Conform to the norm: PN EN 29454 Manufacturer series: TS-81 Related items: ZD-171 Solids content: 10% Density: 1.27g/cm3 @ 20°C Flux residues: corrosive; yes Applications of soldering equipment: nichrome alloy soldering; steel soldering (also acid-proof steel) Kind of package: bottle Standard equipment: fine brush Kind of flux: Water Soluble |
auf Bestellung 13 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
ART.AGT-324 | AG TERMOPASTY |
Category: Heat conductive compounds Description: Heat transfer paste; grey; CARBON; 15.2W/mK; 1g Type of chemical agent: heat transfer paste Colour: grey Thermal conductivity: 15.2W/mK Kind of package: syringe Net weight: 1g Operating temperature: -20...130°C Name: CARBON Agent application: heatsinks Application: facilitates heat transfer GHS Code: GHS09 Hazard statements: H411: Toxic to aquatic life with long lasting effects Precautionary statements: P273: Avoid release to the environment.; P391: Collect spillage.; P501: Dispose of contents/container to ... Appearance: paste |
auf Bestellung 49 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
ART.AGT-325 | AG TERMOPASTY |
Category: Heat conductive compounds Description: Heat transfer paste; grey; CARBON; 15.2W/mK; 3g Type of chemical agent: heat transfer paste Colour: grey Thermal conductivity: 15.2W/mK Kind of package: syringe Net weight: 3g Operating temperature: -20...130°C Name: CARBON Agent application: heatsinks Application: facilitates heat transfer GHS Code: GHS09 Hazard statements: H411: Toxic to aquatic life with long lasting effects Precautionary statements: P273: Avoid release to the environment.; P391: Collect spillage.; P501: Dispose of contents/container to ... Appearance: paste |
auf Bestellung 28 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
ART.AGT-326 | AG TERMOPASTY |
Category: Materials for PCB production Description: Chemical agent: developer; blister,plastic container; 110g Type of chemical agent: developer Kind of package: blister; plastic container Signal word: Danger Hazard statements: H290: May be corrosive to metals.; H314: Causes severe skin burns and eye damage.; H335: May cause respiratory irritation. Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P262: Do not get in eyes, on skin, or on clothing.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P406: Store in corrosive resistant/... container with a resistant inner liner.; P501: Dispose of contents/container to ... GHS Code: GHS05; GHS07 Net weight: 110g Agent application: for photoresists; PCBs |
auf Bestellung 8 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
ART.AGT-327 | AG TERMOPASTY |
Category: Heat conductive compounds Description: Heat transfer paste; silicon based; PASTA HP; 1.5W/mK; 500g Application: facilitates heat transfer GHS Code: GHS09 Hazard statements: H411: Toxic to aquatic life with long lasting effects Agent application: heatsinks Type of chemical agent: heat transfer paste Precautionary statements: P273: Avoid release to the environment.; P391: Collect spillage.; P501: Dispose of contents/container to ... Name: PASTA HP Appearance: paste Agent features: silicon based Resistance to: temperature Signal word: Warning Operating temperature: -50...250°C Thermal conductivity: 1.5W/mK Dielectric constant: 5 Net weight: 0.5kg Kind of package: cartridge |
auf Bestellung 6 Stücke: Lieferzeit 14-21 Tag (e) |
|
||||||
 |
ART.AGT-062 Wazelina 0.50kg | AG TERMOPASTY |
Technical petroleum vaseline; 500g; Max. operating temperature. 30°C; Used to protect electrical contacts andbearing lubrication; ART.AGT-062 AG Termopasty CH WT500 Anzahl je Verpackung: 2 Stücke |
auf Bestellung 12 Stücke: Lieferzeit 7-14 Tag (e) |
|
||||||
| ART.AGT-118 AG Silver 100g | AG TERMOPASTY |
Heat conductive paste based on Silver; 100g; Thermal conductivity >3.8W/m2; Tthermal conductivity much higher than typical carbon-silicon compounds; ART.AGT-118 AG Silver AG Termopasty CH Silver-100 Anzahl je Verpackung: 2 Stücke |
auf Bestellung 4 Stücke: Lieferzeit 7-14 Tag (e) |
|
|||||||
| ART.AGT-127 Pasta HP 100g | AG TERMOPASTY |
HP heat conductive paste; 100g; Thermal conductivity ~1.5W/m2; Essential for the proper operation of all types of temperature sensors; ART.AGT-127 Paste HP AG Termopasty CH PaTermHP100 Anzahl je Verpackung: 2 Stücke |
auf Bestellung 32 Stücke: Lieferzeit 7-14 Tag (e) |
|
| ART.AGT-224 |
|
Hersteller: AG TERMOPASTY
Category: Encapsulating materials
Description: Epoxy encapsulating compound; resin; Curing method: RTV
Type of chemical agent: epoxy encapsulating compound
Application: sealing and encapsulation of electronic circuits
Kind of package: can; syringe
Mix ratio: 100:12
Bonding time: 33min
Appearance: resin
Signal word: Danger; Warning
Hazard statements: H302: Harmful if swallowed.; H312: Harmful in contact with skin; H314: Causes severe skin burns and eye damage.; H315: Causes skin irritation; H317: May cause an allergic skin reaction.; H319: Causes serious eye irritation; H411: Toxic to aquatic life with long lasting effects; H412: Harmful to aquatic life with long lasting effects.
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P262: Do not get in eyes, on skin, or on clothing.; P264: Wash ...thoroughly after handling; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Curing method: RTV
GHS Code: GHS05; GHS07; GHS09
Category: Encapsulating materials
Description: Epoxy encapsulating compound; resin; Curing method: RTV
Type of chemical agent: epoxy encapsulating compound
Application: sealing and encapsulation of electronic circuits
Kind of package: can; syringe
Mix ratio: 100:12
Bonding time: 33min
Appearance: resin
Signal word: Danger; Warning
Hazard statements: H302: Harmful if swallowed.; H312: Harmful in contact with skin; H314: Causes severe skin burns and eye damage.; H315: Causes skin irritation; H317: May cause an allergic skin reaction.; H319: Causes serious eye irritation; H411: Toxic to aquatic life with long lasting effects; H412: Harmful to aquatic life with long lasting effects.
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P262: Do not get in eyes, on skin, or on clothing.; P264: Wash ...thoroughly after handling; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Curing method: RTV
GHS Code: GHS05; GHS07; GHS09
auf Bestellung 18 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 6+ | 15.24 EUR |
| 7+ | 14.04 EUR |
| 12+ | 12.83 EUR |
| ART.AGT-225 |
|
Hersteller: AG TERMOPASTY
Category: Cleaning & maintaining products
Description: Isopropyl alcohol; KONTAKT IPA Plus; 400ml; spray; can; cleaning
Type of chemical agent: isopropyl alcohol
Capacity: 0.4l
Appearance: spray
Kind of package: can
Application: cleaning
Agent application: electronic equipment; metals; optical equipment; PCBs
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P337 + P313: If eye irritation persists: Get medical advice/attention; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02; GHS07
Density: 0.79g/cm3 @ 20°C
Colour: colourless
Name: KONTAKT IPA Plus
Category: Cleaning & maintaining products
Description: Isopropyl alcohol; KONTAKT IPA Plus; 400ml; spray; can; cleaning
Type of chemical agent: isopropyl alcohol
Capacity: 0.4l
Appearance: spray
Kind of package: can
Application: cleaning
Agent application: electronic equipment; metals; optical equipment; PCBs
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P337 + P313: If eye irritation persists: Get medical advice/attention; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02; GHS07
Density: 0.79g/cm3 @ 20°C
Colour: colourless
Name: KONTAKT IPA Plus
auf Bestellung 382 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 6+ | 14.24 EUR |
| ART.AGT-226 |
|
Hersteller: AG TERMOPASTY
Category: Cleaning & maintaining products
Description: Cleaning agent; 400ml; spray; can; Signal word: Danger
Type of chemical agent: cleaning agent
Capacity: 0.4l
Appearance: spray
Kind of package: can
Application: cleaning; degreasing; flux removing; protection against corrosion
Agent application: electrical contacts; PCBs
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H315: Causes skin irritation; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness; H361f: Suspected of damaging fertility.; H373: May cause damage to organs; H412: Harmful to aquatic life with long lasting effects.
Precautionary statements: P201: Obtain special instructions before use.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02; GHS07; GHS08
Category: Cleaning & maintaining products
Description: Cleaning agent; 400ml; spray; can; Signal word: Danger
Type of chemical agent: cleaning agent
Capacity: 0.4l
Appearance: spray
Kind of package: can
Application: cleaning; degreasing; flux removing; protection against corrosion
Agent application: electrical contacts; PCBs
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H315: Causes skin irritation; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness; H361f: Suspected of damaging fertility.; H373: May cause damage to organs; H412: Harmful to aquatic life with long lasting effects.
Precautionary statements: P201: Obtain special instructions before use.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02; GHS07; GHS08
auf Bestellung 75 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 6+ | 14.29 EUR |
| 7+ | 12.83 EUR |
| ART.AGT-227 |
|
Hersteller: AG TERMOPASTY
Category: Cleaning & maintaining products
Description: Cleaning agent; KONTAKT S; 400ml; spray; can; Signal word: Danger
Type of chemical agent: cleaning agent
Capacity: 0.4l
Appearance: spray
Kind of package: can
Application: cleaning; preservation
Agent application: electrical contacts; electronic equipment
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H315: Causes skin irritation; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness; H361f: Suspected of damaging fertility.; H373: May cause damage to organs; H412: Harmful to aquatic life with long lasting effects.
Precautionary statements: P201: Obtain special instructions before use.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician; P331: Do NOT induce vomiting.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02; GHS07; GHS08
Name: KONTAKT S
Category: Cleaning & maintaining products
Description: Cleaning agent; KONTAKT S; 400ml; spray; can; Signal word: Danger
Type of chemical agent: cleaning agent
Capacity: 0.4l
Appearance: spray
Kind of package: can
Application: cleaning; preservation
Agent application: electrical contacts; electronic equipment
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H315: Causes skin irritation; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness; H361f: Suspected of damaging fertility.; H373: May cause damage to organs; H412: Harmful to aquatic life with long lasting effects.
Precautionary statements: P201: Obtain special instructions before use.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician; P331: Do NOT induce vomiting.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02; GHS07; GHS08
Name: KONTAKT S
auf Bestellung 31 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 6+ | 14.76 EUR |
| 7+ | 13.54 EUR |
| ART.AGT-228 |
|
Hersteller: AG TERMOPASTY
Category: Protection & screen coatings
Description: Protective coating; colourless; spray; 400ml; Signal word: Danger
Type of chemical agent: protective coating
Capacity: 0.4l
Appearance: spray
Application: extrusion of plastics; production of plastic laminates; vacuum forming of plastics
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02
Agent features: anti adhesive; glidant
Colour: colourless
Name: ROZDZIELACZ BEZSILIKONOWY DO FORM
Category: Protection & screen coatings
Description: Protective coating; colourless; spray; 400ml; Signal word: Danger
Type of chemical agent: protective coating
Capacity: 0.4l
Appearance: spray
Application: extrusion of plastics; production of plastic laminates; vacuum forming of plastics
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02
Agent features: anti adhesive; glidant
Colour: colourless
Name: ROZDZIELACZ BEZSILIKONOWY DO FORM
auf Bestellung 6 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 6+ | 14.17 EUR |
| ART.AGT-229 |
|
Hersteller: AG TERMOPASTY
Category: Compressed Air and Freezers
Description: Compressed gas; can; colourless; 300ml; Compressed Gas
Colour: colourless
Type of chemical agent: compressed gas
Name: Compressed Gas
Agent application: computer equipment; electronic equipment; optical equipment
Signal word: Danger
Agent features: flammable
GHS Code: GHS02
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P410 + P403: Protect from sunlight. Store in a well-ventilated place.
Capacity: 0.3l
Kind of package: can
Application: cleaning; dust removing
Category: Compressed Air and Freezers
Description: Compressed gas; can; colourless; 300ml; Compressed Gas
Colour: colourless
Type of chemical agent: compressed gas
Name: Compressed Gas
Agent application: computer equipment; electronic equipment; optical equipment
Signal word: Danger
Agent features: flammable
GHS Code: GHS02
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P410 + P403: Protect from sunlight. Store in a well-ventilated place.
Capacity: 0.3l
Kind of package: can
Application: cleaning; dust removing
auf Bestellung 40 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 13+ | 6.69 EUR |
| 14+ | 6.34 EUR |
| ART.AGT-232 |
|
Hersteller: AG TERMOPASTY
Category: Protection & screen coatings
Description: Varnish; transparent; spray; 100ml; LAKIER PVB; Temp: -50÷150°C
Type of chemical agent: varnish
Application: isolation; prevening from moisture; prevents short circuits and corona discharge; prevents stray currents and short circuit; protection against corrosion
Kind of package: can
Appearance: spray
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H318: Causes serious eye damage; H336: May cause drowsiness or dizziness
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02; GHS05; GHS07
Operating temperature: -50...150°C
Capacity: 0.1l
Flash point: 380°C
Colour: transparent
Agent features: good adhesion to metal, plastic and wood; re-soldering may be effectuated through the coating layer
Name: LAKIER PVB
Agent application: electronic equipment; PCBs
Category: Protection & screen coatings
Description: Varnish; transparent; spray; 100ml; LAKIER PVB; Temp: -50÷150°C
Type of chemical agent: varnish
Application: isolation; prevening from moisture; prevents short circuits and corona discharge; prevents stray currents and short circuit; protection against corrosion
Kind of package: can
Appearance: spray
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H318: Causes serious eye damage; H336: May cause drowsiness or dizziness
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02; GHS05; GHS07
Operating temperature: -50...150°C
Capacity: 0.1l
Flash point: 380°C
Colour: transparent
Agent features: good adhesion to metal, plastic and wood; re-soldering may be effectuated through the coating layer
Name: LAKIER PVB
Agent application: electronic equipment; PCBs
auf Bestellung 138 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 11+ | 7.78 EUR |
| 12+ | 7.57 EUR |
| ART.AGT-233 |
|
Hersteller: AG TERMOPASTY
Category: Compressed Air and Freezers
Description: Compressed gas; can; colourless; 600ml; Compressed Gas
Type of chemical agent: compressed gas
Application: cleaning; dust removing
Kind of package: can
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02
Capacity: 0.6l
Colour: colourless
Agent features: flammable
Name: Compressed Gas
Agent application: computer equipment; electronic equipment; optical equipment
Category: Compressed Air and Freezers
Description: Compressed gas; can; colourless; 600ml; Compressed Gas
Type of chemical agent: compressed gas
Application: cleaning; dust removing
Kind of package: can
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02
Capacity: 0.6l
Colour: colourless
Agent features: flammable
Name: Compressed Gas
Agent application: computer equipment; electronic equipment; optical equipment
auf Bestellung 266 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 9+ | 9.53 EUR |
| 10+ | 8.9 EUR |
| ART.AGT-235 |
|
Hersteller: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; RMA; spray; can; 0.1l; 750mg/cm3@20°C
Type of flux: rosin based
Appearance: spray
Capacity: 0.1l
Soldering equipment features: easy distribution of the preparation
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H317: May cause an allergic skin reaction.; H319: Causes serious eye irritation; H412: Harmful to aquatic life with long lasting effects.
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P337 + P313: If eye irritation persists: Get medical advice/attention; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02; GHS07
Conform to the norm: PN EN 29454 1.1.1.A.
Density: 0.75g/cm3 @ 20°C
Name: LAKIER TOPNIK LT-4
Applications of soldering equipment: PCB protection against oxidation; soldering of heavily oxidized surfaces
Kind of package: can
Kind of flux: RMA
Category: Fluxes
Description: Flux: rosin based; RMA; spray; can; 0.1l; 750mg/cm3@20°C
Type of flux: rosin based
Appearance: spray
Capacity: 0.1l
Soldering equipment features: easy distribution of the preparation
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H317: May cause an allergic skin reaction.; H319: Causes serious eye irritation; H412: Harmful to aquatic life with long lasting effects.
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P337 + P313: If eye irritation persists: Get medical advice/attention; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02; GHS07
Conform to the norm: PN EN 29454 1.1.1.A.
Density: 0.75g/cm3 @ 20°C
Name: LAKIER TOPNIK LT-4
Applications of soldering equipment: PCB protection against oxidation; soldering of heavily oxidized surfaces
Kind of package: can
Kind of flux: RMA
auf Bestellung 13 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 10+ | 8.73 EUR |
| 11+ | 7.87 EUR |
| 12+ | 7.29 EUR |
| ART.AGT-237 |
|
Hersteller: AG TERMOPASTY
Category: Cleaning & maintaining products
Description: Cleaner; 0.1l; spray; can; flux removing,impurities removing
Type of chemical agent: cleaner
Capacity: 0.1l
Appearance: spray
Kind of package: can
Application: flux removing; impurities removing
Agent application: PCBs
Agent features: based on alcohol
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness; H412: Harmful to aquatic life with long lasting effects.
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P271: Use only outdoors or in a well-ventilated area.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02; GHS07
Category: Cleaning & maintaining products
Description: Cleaner; 0.1l; spray; can; flux removing,impurities removing
Type of chemical agent: cleaner
Capacity: 0.1l
Appearance: spray
Kind of package: can
Application: flux removing; impurities removing
Agent application: PCBs
Agent features: based on alcohol
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness; H412: Harmful to aquatic life with long lasting effects.
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P271: Use only outdoors or in a well-ventilated area.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02; GHS07
auf Bestellung 14 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 11+ | 8 EUR |
| 12+ | 7.29 EUR |
| 13+ | 6.94 EUR |
| ART.AGT-238 |
|
Hersteller: AG TERMOPASTY
Category: Cleaning & maintaining products
Description: Cleaner; 0.4l; spray; can; flux removing,impurities removing
Type of chemical agent: cleaner
Application: flux removing; impurities removing
Kind of package: can
Appearance: spray
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness; H412: Harmful to aquatic life with long lasting effects.
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P271: Use only outdoors or in a well-ventilated area.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02; GHS07
Capacity: 0.4l
Agent features: based on alcohol
Agent application: PCBs
Category: Cleaning & maintaining products
Description: Cleaner; 0.4l; spray; can; flux removing,impurities removing
Type of chemical agent: cleaner
Application: flux removing; impurities removing
Kind of package: can
Appearance: spray
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness; H412: Harmful to aquatic life with long lasting effects.
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P271: Use only outdoors or in a well-ventilated area.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02; GHS07
Capacity: 0.4l
Agent features: based on alcohol
Agent application: PCBs
auf Bestellung 316 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 8+ | 11.08 EUR |
| 9+ | 9.77 EUR |
| ART.AGT-240 |
Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 28.2mm; L: 41.5mm; Thk: 0.3mm; 1.5W/mK; 5pcs.
Type of tape: heat transfer
Width: 28.2mm
Length: 41.5mm
Thickness: 0.3mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: double-sided; glued
Quantity in set/package: 5pcs.
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 28.2mm; L: 41.5mm; Thk: 0.3mm; 1.5W/mK; 5pcs.
Type of tape: heat transfer
Width: 28.2mm
Length: 41.5mm
Thickness: 0.3mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: double-sided; glued
Quantity in set/package: 5pcs.
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| ART.AGT-241 |
Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 13mm; L: 18mm; Thk: 0.3mm; 1.5W/mK; 5pcs.
Type of tape: heat transfer
Width: 13mm
Length: 18mm
Thickness: 0.3mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: double-sided; glued
Quantity in set/package: 5pcs.
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 13mm; L: 18mm; Thk: 0.3mm; 1.5W/mK; 5pcs.
Type of tape: heat transfer
Width: 13mm
Length: 18mm
Thickness: 0.3mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: double-sided; glued
Quantity in set/package: 5pcs.
auf Bestellung 19 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 19+ | 4.47 EUR |
| ART.AGT-242 |
Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 18mm; L: 23mm; Thk: 0.3mm; 1.5W/mK
Type of tape: heat transfer
Width: 18mm
Length: 23mm
Thickness: 0.3mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: double-sided; glued
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 18mm; L: 23mm; Thk: 0.3mm; 1.5W/mK
Type of tape: heat transfer
Width: 18mm
Length: 23mm
Thickness: 0.3mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: double-sided; glued
auf Bestellung 29 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 29+ | 2.93 EUR |
| ART.AGT-243 |
Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 25mm; L: 26mm; Thk: 0.3mm; 1.5W/mK; 5pcs.
Type of tape: heat transfer
Width: 25mm
Length: 26mm
Thickness: 0.3mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: double-sided; glued
Quantity in set/package: 5pcs.
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 25mm; L: 26mm; Thk: 0.3mm; 1.5W/mK; 5pcs.
Type of tape: heat transfer
Width: 25mm
Length: 26mm
Thickness: 0.3mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: double-sided; glued
Quantity in set/package: 5pcs.
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| ART.AGT-246 |
|
Hersteller: AG TERMOPASTY
Category: Soldering Chemicals Others
Description: Agent: soldering acid; for difficult to tin nickel surfaces
Type of chemical agent: soldering acid
Application: for difficult to tin nickel surfaces
Signal word: Danger
Hazard statements: H302: Harmful if swallowed.; H314: Causes severe skin burns and eye damage.
Precautionary statements: P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P405: Store locked up.
GHS Code: GHS05; GHS07
Capacity: 0.1l
Name: KWAS LUTOWNICZY
Category: Soldering Chemicals Others
Description: Agent: soldering acid; for difficult to tin nickel surfaces
Type of chemical agent: soldering acid
Application: for difficult to tin nickel surfaces
Signal word: Danger
Hazard statements: H302: Harmful if swallowed.; H314: Causes severe skin burns and eye damage.
Precautionary statements: P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P405: Store locked up.
GHS Code: GHS05; GHS07
Capacity: 0.1l
Name: KWAS LUTOWNICZY
auf Bestellung 22 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 17+ | 5.31 EUR |
| 18+ | 4.94 EUR |
| 19+ | 4.52 EUR |
| ART.AGT-247 |
|
Hersteller: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; grey; stainless steel particles,silicone
Type of chemical agent: heat transfer paste
Colour: grey
Thermal conductivity: 6W/mK
Kind of package: plastic container
Net weight: 0.1kg
Signal word: Warning
Operating temperature: -50...250°C
Name: AG EXTREME
Grease ingredients: silicone; stainless steel particles
Agent application: heatsinks
Application: facilitates heat transfer
GHS Code: GHS09
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Appearance: paste
Category: Heat conductive compounds
Description: Heat transfer paste; grey; stainless steel particles,silicone
Type of chemical agent: heat transfer paste
Colour: grey
Thermal conductivity: 6W/mK
Kind of package: plastic container
Net weight: 0.1kg
Signal word: Warning
Operating temperature: -50...250°C
Name: AG EXTREME
Grease ingredients: silicone; stainless steel particles
Agent application: heatsinks
Application: facilitates heat transfer
GHS Code: GHS09
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Appearance: paste
auf Bestellung 34 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 1+ | 117.14 EUR |
| 5+ | 113.26 EUR |
| 10+ | 104.21 EUR |
| ART.AGT-248 |
|
Hersteller: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; halide-free,Lead Free,No Clean,ROL0; liquid
Type of flux: rosin based
Kind of flux: halide-free; Lead Free; No Clean; ROL0
Appearance: liquid
Kind of package: bottle
Capacity: 50ml
Soldering equipment features: can be washed down with alcohol based agents
Solids content: 0...5%
Density: 794mg/cm3 @ 25°C
Colour: amber
Signal word: Danger
Hazard statements: H225: Highly flammable liquid and vapour.; H304: May be fatal if swallowed and enters airways.; H317: May cause an allergic skin reaction.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P235: Keep cool.; P241: Use explosion-proof electrical/ventilating/lighting/.../equipment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P331: Do NOT induce vomiting.; P501: Dispose of contents/container to ...
GHS Code: GHS02; GHS07; GHS08
Flux residues: non-corrosive
Category: Fluxes
Description: Flux: rosin based; halide-free,Lead Free,No Clean,ROL0; liquid
Type of flux: rosin based
Kind of flux: halide-free; Lead Free; No Clean; ROL0
Appearance: liquid
Kind of package: bottle
Capacity: 50ml
Soldering equipment features: can be washed down with alcohol based agents
Solids content: 0...5%
Density: 794mg/cm3 @ 25°C
Colour: amber
Signal word: Danger
Hazard statements: H225: Highly flammable liquid and vapour.; H304: May be fatal if swallowed and enters airways.; H317: May cause an allergic skin reaction.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P235: Keep cool.; P241: Use explosion-proof electrical/ventilating/lighting/.../equipment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P331: Do NOT induce vomiting.; P501: Dispose of contents/container to ...
GHS Code: GHS02; GHS07; GHS08
Flux residues: non-corrosive
auf Bestellung 142 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 15+ | 5.74 EUR |
| 16+ | 5.46 EUR |
| 17+ | 5.19 EUR |
| ART.AGT-249 |
|
Hersteller: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; halide-free,No Clean,ROL0; liquid; pen; 8ml
Type of flux: rosin based
Appearance: liquid
Capacity: 8ml
Soldering equipment features: can be washed down with alcohol based agents
Signal word: Danger
Hazard statements: H225: Highly flammable liquid and vapour.; H317: May cause an allergic skin reaction.; H318: Causes serious eye damage; H336: May cause drowsiness or dizziness; H373: May cause damage to organs
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P370 + P378: In case of fire: Use ...for extinction.
GHS Code: GHS02; GHS05; GHS07; GHS08
Flux name: SW26
Conform to the norm: PN EN 29454
Solids content: 24%
Density: 860mg/cm3 @ 20°C
Name: TK83
Colour: amber
Applications of soldering equipment: tinning elements coated with polyurethane varnishes
Kind of package: pen
Kind of flux: halide-free; No Clean; ROL0
Category: Fluxes
Description: Flux: rosin based; halide-free,No Clean,ROL0; liquid; pen; 8ml
Type of flux: rosin based
Appearance: liquid
Capacity: 8ml
Soldering equipment features: can be washed down with alcohol based agents
Signal word: Danger
Hazard statements: H225: Highly flammable liquid and vapour.; H317: May cause an allergic skin reaction.; H318: Causes serious eye damage; H336: May cause drowsiness or dizziness; H373: May cause damage to organs
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P370 + P378: In case of fire: Use ...for extinction.
GHS Code: GHS02; GHS05; GHS07; GHS08
Flux name: SW26
Conform to the norm: PN EN 29454
Solids content: 24%
Density: 860mg/cm3 @ 20°C
Name: TK83
Colour: amber
Applications of soldering equipment: tinning elements coated with polyurethane varnishes
Kind of package: pen
Kind of flux: halide-free; No Clean; ROL0
auf Bestellung 59 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 11+ | 8.04 EUR |
| 12+ | 7.27 EUR |
| ART.AGT-250 |
|
Hersteller: AG TERMOPASTY
Category: Chemicals others
Description: Electrically conductive rubber; black; W: 50mm; L: 50mm; Thk: 0.5mm
Type of chemical agent: electrically conductive rubber
Colour: black
Name: GUMA ELEKTROPRZEWODZĄCA
Agent features: electrically conductive
Application: calculators; control boards; for computer; for notebooks
Width: 50mm
Length: 50mm
Thickness: 0.5mm
Category: Chemicals others
Description: Electrically conductive rubber; black; W: 50mm; L: 50mm; Thk: 0.5mm
Type of chemical agent: electrically conductive rubber
Colour: black
Name: GUMA ELEKTROPRZEWODZĄCA
Agent features: electrically conductive
Application: calculators; control boards; for computer; for notebooks
Width: 50mm
Length: 50mm
Thickness: 0.5mm
auf Bestellung 35 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 31+ | 2.77 EUR |
| 32+ | 2.69 EUR |
| ART.AGT-251 |
|
Hersteller: AG TERMOPASTY
Category: Chemicals others
Description: Electrically conductive rubber; black; W: 50mm; L: 150mm
Type of chemical agent: electrically conductive rubber
Colour: black
Agent features: electrically conductive
Length: 0.15m
Width: 50mm
Name: GUMA ELEKTROPRZEWODZĄCA
Application: calculators; control boards; for computer; for notebooks
Thickness: 0.5mm
Category: Chemicals others
Description: Electrically conductive rubber; black; W: 50mm; L: 150mm
Type of chemical agent: electrically conductive rubber
Colour: black
Agent features: electrically conductive
Length: 0.15m
Width: 50mm
Name: GUMA ELEKTROPRZEWODZĄCA
Application: calculators; control boards; for computer; for notebooks
Thickness: 0.5mm
auf Bestellung 7 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 7+ | 12.15 EUR |
| ART.AGT-252 |
|
Hersteller: AG TERMOPASTY
Category: Cleaning & maintaining products
Description: Isopropyl alcohol; KONTAKT IPA Plus; 500ml; liquid; colourless
Kind of package: bottle with atomizer
Application: cleaning
Signal word: Danger
Agent application: electronic equipment; metals; optical equipment; PCBs
GHS Code: GHS02; GHS07
Hazard statements: H225: Highly flammable liquid and vapour.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness
Type of chemical agent: isopropyl alcohol
Name: KONTAKT IPA Plus
Appearance: liquid
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P233: Keep container tightly closed.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P312: Call a POISON CENTER or doctor/physician if you feel unwell.; P370 + P378: In case of fire: Use ...for extinction.
Capacity: 0.5l
Density: 0.79g/cm3 @ 20°C
Colour: colourless
Category: Cleaning & maintaining products
Description: Isopropyl alcohol; KONTAKT IPA Plus; 500ml; liquid; colourless
Kind of package: bottle with atomizer
Application: cleaning
Signal word: Danger
Agent application: electronic equipment; metals; optical equipment; PCBs
GHS Code: GHS02; GHS07
Hazard statements: H225: Highly flammable liquid and vapour.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness
Type of chemical agent: isopropyl alcohol
Name: KONTAKT IPA Plus
Appearance: liquid
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P233: Keep container tightly closed.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P312: Call a POISON CENTER or doctor/physician if you feel unwell.; P370 + P378: In case of fire: Use ...for extinction.
Capacity: 0.5l
Density: 0.79g/cm3 @ 20°C
Colour: colourless
auf Bestellung 311 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 8+ | 10.84 EUR |
| ART.AGT-253 |
|
Hersteller: AG TERMOPASTY
Category: Soldering Chemicals Others
Description: Agent: soldering acid; for difficult to tin nickel surfaces
Type of chemical agent: soldering acid
Application: for difficult to tin nickel surfaces
Signal word: Danger
Hazard statements: H302: Harmful if swallowed.; H314: Causes severe skin burns and eye damage.
Precautionary statements: P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P405: Store locked up.
GHS Code: GHS05; GHS07
Capacity: 50ml
Name: KWAS LUTOWNICZY
Category: Soldering Chemicals Others
Description: Agent: soldering acid; for difficult to tin nickel surfaces
Type of chemical agent: soldering acid
Application: for difficult to tin nickel surfaces
Signal word: Danger
Hazard statements: H302: Harmful if swallowed.; H314: Causes severe skin burns and eye damage.
Precautionary statements: P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P405: Store locked up.
GHS Code: GHS05; GHS07
Capacity: 50ml
Name: KWAS LUTOWNICZY
auf Bestellung 19 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 17+ | 5.07 EUR |
| 19+ | 4.7 EUR |
| ART.AGT-254 |
|
Hersteller: AG TERMOPASTY
Category: Cleaning & maintaining products
Description: Cleaning agent; KONTAKT PR; 400ml; spray; can; Signal word: Danger
Type of chemical agent: cleaning agent
Capacity: 0.4l
Appearance: spray
Kind of package: can
Application: cleaning; lubrication; regeneration
Agent application: potentiometers
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P251: Pressurized container: Do not pierce or burn, even after use.; P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician; P331: Do NOT induce vomiting.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02; GHS07
Name: KONTAKT PR
Category: Cleaning & maintaining products
Description: Cleaning agent; KONTAKT PR; 400ml; spray; can; Signal word: Danger
Type of chemical agent: cleaning agent
Capacity: 0.4l
Appearance: spray
Kind of package: can
Application: cleaning; lubrication; regeneration
Agent application: potentiometers
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P251: Pressurized container: Do not pierce or burn, even after use.; P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician; P331: Do NOT induce vomiting.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02; GHS07
Name: KONTAKT PR
auf Bestellung 5 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 5+ | 17.02 EUR |
| ART.AGT-256 |
|
Hersteller: AG TERMOPASTY
Category: Cleaning & maintaining products
Description: Cleaning cloth: cleaning set; SMARTGEL; 0.25l
Capacity: 0.25l
Application: dust removing; impurities removing
Name: SMARTGEL
Kit contents: cleaning fluid; microfiber cloth
Type of cleaning cloth: cleaning set
Agent application: computer equipment; LCD/TFT displays; office equipment
Category: Cleaning & maintaining products
Description: Cleaning cloth: cleaning set; SMARTGEL; 0.25l
Capacity: 0.25l
Application: dust removing; impurities removing
Name: SMARTGEL
Kit contents: cleaning fluid; microfiber cloth
Type of cleaning cloth: cleaning set
Agent application: computer equipment; LCD/TFT displays; office equipment
auf Bestellung 18 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 18+ | 4.74 EUR |
| ART.AGT-257 |
Hersteller: AG TERMOPASTY
Category: Wipes & cleaning clothes
Description: Cleaning cloth: cloth; microfiber; 5pcs; 300x300mm; cleaning; dry
Type of cleaning cloth: cloth
Material: microfiber
Quantity in set/package: 5pcs.
Cloth dimensions: 300x300mm
Application: cleaning
Agent application: computer equipment; office equipment
Version: dry
Category: Wipes & cleaning clothes
Description: Cleaning cloth: cloth; microfiber; 5pcs; 300x300mm; cleaning; dry
Type of cleaning cloth: cloth
Material: microfiber
Quantity in set/package: 5pcs.
Cloth dimensions: 300x300mm
Application: cleaning
Agent application: computer equipment; office equipment
Version: dry
auf Bestellung 9 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 9+ | 9.46 EUR |
| ART.AGT-262 |
|
Hersteller: AG TERMOPASTY
Category: Encapsulating materials
Description: Silicone encapsulating compound; white; Temp: -50÷200°C; 20kV/mm
Type of chemical agent: silicone encapsulating compound
Colour: white
Application: sealing and encapsulation of electronic circuits
Shore hardness: 59
Operating temperature: -50...200°C
Thermal conductivity: 1.2W/mK
Density: 1.2g/cm3 @ 25°C
Dielectric strength: 20kV/mm
Mix ratio: 100:10
Bonding time: 30min
Appearance: paste
Surface resistance: <2410TΩ
Agent features: condensation cure; two-component
Net weight: 1kg
Precautionary statements: P202: Do not handle until all safety precautions have been read and understood.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P308 + P313: IF exposed or concerned: Get medical advice/attention.
Curing method: RTV
Dielectric constant: 3
Available labels languages: BG; CZ; EN; ES; FI; FR; HU; IT; PL; RO; SK
Signal word: Danger
GHS Code: GHS02; GHS07; GHS08
Hazard statements: H226: Flammable liquid and vapour.; H319: Causes serious eye irritation; H332: Harmful if inhaled; H335: May cause respiratory irritation.; H360D: May damage the unborn child.; H372: Causes damage to organs
Category: Encapsulating materials
Description: Silicone encapsulating compound; white; Temp: -50÷200°C; 20kV/mm
Type of chemical agent: silicone encapsulating compound
Colour: white
Application: sealing and encapsulation of electronic circuits
Shore hardness: 59
Operating temperature: -50...200°C
Thermal conductivity: 1.2W/mK
Density: 1.2g/cm3 @ 25°C
Dielectric strength: 20kV/mm
Mix ratio: 100:10
Bonding time: 30min
Appearance: paste
Surface resistance: <2410TΩ
Agent features: condensation cure; two-component
Net weight: 1kg
Precautionary statements: P202: Do not handle until all safety precautions have been read and understood.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P308 + P313: IF exposed or concerned: Get medical advice/attention.
Curing method: RTV
Dielectric constant: 3
Available labels languages: BG; CZ; EN; ES; FI; FR; HU; IT; PL; RO; SK
Signal word: Danger
GHS Code: GHS02; GHS07; GHS08
Hazard statements: H226: Flammable liquid and vapour.; H319: Causes serious eye irritation; H332: Harmful if inhaled; H335: May cause respiratory irritation.; H360D: May damage the unborn child.; H372: Causes damage to organs
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| ART.AGT-264 |
|
Hersteller: AG TERMOPASTY
Category: Encapsulating materials
Description: Silicone encapsulating compound; transparent; Temp: -50÷180°C
Type of chemical agent: silicone encapsulating compound
Colour: transparent
Application: sealing and encapsulation of electronic circuits
Operating temperature: -50...180°C
Density: 980mg/cm3 @ 25°C
Mix ratio: 3:2
Bonding time: 70min
Agent features: additive linking; two-component
Net weight: 1kg
Resistance to: UV rays
Category: Encapsulating materials
Description: Silicone encapsulating compound; transparent; Temp: -50÷180°C
Type of chemical agent: silicone encapsulating compound
Colour: transparent
Application: sealing and encapsulation of electronic circuits
Operating temperature: -50...180°C
Density: 980mg/cm3 @ 25°C
Mix ratio: 3:2
Bonding time: 70min
Agent features: additive linking; two-component
Net weight: 1kg
Resistance to: UV rays
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| ART.AGT-266 |
|
Hersteller: AG TERMOPASTY
Category: Soldering Chemicals Others
Description: Gas: butane; 200ml; can; for gas soldering iron
Capacity: 0.2l
Kind of package: can
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.
Precautionary statements: P102: Keep out of reach of children.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02
Agent features: universal filling valve
Type of gas: butane
Applications of soldering equipment: for gas soldering iron
Category: Soldering Chemicals Others
Description: Gas: butane; 200ml; can; for gas soldering iron
Capacity: 0.2l
Kind of package: can
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.
Precautionary statements: P102: Keep out of reach of children.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02
Agent features: universal filling valve
Type of gas: butane
Applications of soldering equipment: for gas soldering iron
auf Bestellung 315 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 13+ | 6.74 EUR |
| 14+ | 6.3 EUR |
| 15+ | 5.99 EUR |
| ART.AGT-267 |
|
Hersteller: AG TERMOPASTY
Category: Cleaning & maintaining products
Description: Isopropyl alcohol; KONTAKT IPA Plus; 250ml; liquid; colourless
Kind of package: bottle with atomizer
Application: cleaning
Signal word: Danger
Agent application: electronic equipment; metals; optical equipment; PCBs
GHS Code: GHS02; GHS07
Hazard statements: H225: Highly flammable liquid and vapour.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness
Type of chemical agent: isopropyl alcohol
Name: KONTAKT IPA Plus
Appearance: liquid
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P233: Keep container tightly closed.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P312: Call a POISON CENTER or doctor/physician if you feel unwell.; P370 + P378: In case of fire: Use ...for extinction.
Capacity: 0.25l
Density: 0.79g/cm3 @ 20°C
Colour: colourless
Category: Cleaning & maintaining products
Description: Isopropyl alcohol; KONTAKT IPA Plus; 250ml; liquid; colourless
Kind of package: bottle with atomizer
Application: cleaning
Signal word: Danger
Agent application: electronic equipment; metals; optical equipment; PCBs
GHS Code: GHS02; GHS07
Hazard statements: H225: Highly flammable liquid and vapour.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness
Type of chemical agent: isopropyl alcohol
Name: KONTAKT IPA Plus
Appearance: liquid
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P233: Keep container tightly closed.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P312: Call a POISON CENTER or doctor/physician if you feel unwell.; P370 + P378: In case of fire: Use ...for extinction.
Capacity: 0.25l
Density: 0.79g/cm3 @ 20°C
Colour: colourless
auf Bestellung 154 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 10+ | 8.59 EUR |
| 11+ | 8.47 EUR |
| ART.AGT-268 |
|
Hersteller: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; halide-free,No Clean,ROL0; resin; 1000g
Type of flux: rosin based
Appearance: resin
Soldering equipment features: activated with adipic acid (2,5%)
Signal word: Warning
Hazard statements: H317: May cause an allergic skin reaction.
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P272: Contaminated work clothing should not be allowed out of the workplace.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P363: Wash contaminated clothing before reuse; P501: Dispose of contents/container to ...
GHS Code: GHS07
Net weight: 1kg
Flux residues: amber; yes
Kind of package: plastic container
Kind of flux: halide-free; No Clean; ROL0
Category: Fluxes
Description: Flux: rosin based; halide-free,No Clean,ROL0; resin; 1000g
Type of flux: rosin based
Appearance: resin
Soldering equipment features: activated with adipic acid (2,5%)
Signal word: Warning
Hazard statements: H317: May cause an allergic skin reaction.
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P272: Contaminated work clothing should not be allowed out of the workplace.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P363: Wash contaminated clothing before reuse; P501: Dispose of contents/container to ...
GHS Code: GHS07
Net weight: 1kg
Flux residues: amber; yes
Kind of package: plastic container
Kind of flux: halide-free; No Clean; ROL0
auf Bestellung 4 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 4+ | 21.28 EUR |
| ART.AGT-270 |
|
Hersteller: AG TERMOPASTY
Category: Wipes & cleaning clothes
Description: Cleaning cloth: cleaning sticks; 20pcs; L: 122mm; dust free
Type of cleaning cloth: cleaning sticks
Quantity in set/package: 20pcs.
Length: 122mm
Application: keybord cleaning swabs; precise cleaning operations
Version: single sided
Length of cleaning swab: 25mm
Handle material: polypropylene
Tip material: polyurethane
Width of cleaning swab: 15.5mm
Agent features: does not scratch surfaces; dust free
Category: Wipes & cleaning clothes
Description: Cleaning cloth: cleaning sticks; 20pcs; L: 122mm; dust free
Type of cleaning cloth: cleaning sticks
Quantity in set/package: 20pcs.
Length: 122mm
Application: keybord cleaning swabs; precise cleaning operations
Version: single sided
Length of cleaning swab: 25mm
Handle material: polypropylene
Tip material: polyurethane
Width of cleaning swab: 15.5mm
Agent features: does not scratch surfaces; dust free
auf Bestellung 7 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 7+ | 12.15 EUR |
| ART.AGT-272 |
|
Hersteller: AG TERMOPASTY
Category: Soldering Chemicals Others
Description: Agent: soldering acid; for difficult to tin nickel surfaces
Type of chemical agent: soldering acid
Application: for difficult to tin nickel surfaces
Signal word: Danger
Hazard statements: H302: Harmful if swallowed.; H314: Causes severe skin burns and eye damage.
Precautionary statements: P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P405: Store locked up.
GHS Code: GHS05; GHS07
Capacity: 0.5l
Name: KWAS LUTOWNICZY
Category: Soldering Chemicals Others
Description: Agent: soldering acid; for difficult to tin nickel surfaces
Type of chemical agent: soldering acid
Application: for difficult to tin nickel surfaces
Signal word: Danger
Hazard statements: H302: Harmful if swallowed.; H314: Causes severe skin burns and eye damage.
Precautionary statements: P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P405: Store locked up.
GHS Code: GHS05; GHS07
Capacity: 0.5l
Name: KWAS LUTOWNICZY
auf Bestellung 11 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 5+ | 17.29 EUR |
| 10+ | 15.55 EUR |
| ART.AGT-293 |
Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.3mm; 1.5W/mK; glueless
Type of tape: heat transfer
Width: 20mm
Length: 0.13m
Thickness: 0.3mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.3mm; 1.5W/mK; glueless
Type of tape: heat transfer
Width: 20mm
Length: 0.13m
Thickness: 0.3mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
auf Bestellung 10 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 10+ | 8.51 EUR |
| ART.AGT-294 |
Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.3mm; 1.5W/mK; glueless
Type of tape: heat transfer
Width: 30mm
Length: 30mm
Thickness: 0.3mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.3mm; 1.5W/mK; glueless
Type of tape: heat transfer
Width: 30mm
Length: 30mm
Thickness: 0.3mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| ART.AGT-296 |
Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.3mm; 2.4W/mK; glueless
Type of tape: heat transfer
Width: 20mm
Length: 0.13m
Thickness: 0.3mm
Thermal conductivity: 2.4W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.3mm; 2.4W/mK; glueless
Type of tape: heat transfer
Width: 20mm
Length: 0.13m
Thickness: 0.3mm
Thermal conductivity: 2.4W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
auf Bestellung 35 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 23+ | 3.72 EUR |
| 27+ | 3.17 EUR |
| 29+ | 2.96 EUR |
| ART.AGT-297 |
Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.3mm; 2.4W/mK; glueless
Type of tape: heat transfer
Width: 30mm
Length: 30mm
Thickness: 0.3mm
Thermal conductivity: 2.4W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.3mm; 2.4W/mK; glueless
Type of tape: heat transfer
Width: 30mm
Length: 30mm
Thickness: 0.3mm
Thermal conductivity: 2.4W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
auf Bestellung 19 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 19+ | 4.47 EUR |
| ART.AGT-299 |
Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.5mm; 1.5W/mK; glueless
Type of tape: heat transfer
Width: 20mm
Length: 0.13m
Thickness: 0.5mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.5mm; 1.5W/mK; glueless
Type of tape: heat transfer
Width: 20mm
Length: 0.13m
Thickness: 0.5mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
auf Bestellung 4 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 4+ | 21.28 EUR |
| ART.AGT-300 |
Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.5mm; 1.5W/mK; glueless
Type of tape: heat transfer
Width: 30mm
Length: 30mm
Thickness: 0.5mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.5mm; 1.5W/mK; glueless
Type of tape: heat transfer
Width: 30mm
Length: 30mm
Thickness: 0.5mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| ART.AGT-301 |
Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 200mm; L: 400mm; Thk: 0.5mm; 2.4W/mK
Type of tape: heat transfer
Width: 200mm
Length: 0.4m
Thickness: 0.5mm
Thermal conductivity: 2.4W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 200mm; L: 400mm; Thk: 0.5mm; 2.4W/mK
Type of tape: heat transfer
Width: 200mm
Length: 0.4m
Thickness: 0.5mm
Thermal conductivity: 2.4W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
auf Bestellung 4 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 1+ | 85.73 EUR |
| ART.AGT-302 |
Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.5mm; 2.4W/mK; glueless
Type of tape: heat transfer
Width: 20mm
Length: 0.13m
Thickness: 0.5mm
Thermal conductivity: 2.4W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.5mm; 2.4W/mK; glueless
Type of tape: heat transfer
Width: 20mm
Length: 0.13m
Thickness: 0.5mm
Thermal conductivity: 2.4W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
auf Bestellung 4 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 4+ | 21.28 EUR |
| ART.AGT-303 |
Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.5mm; 2.4W/mK
Type of tape: heat transfer
Width: 30mm
Length: 30mm
Thickness: 0.5mm
Thermal conductivity: 2.4W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: double-sided; glueless
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.5mm; 2.4W/mK
Type of tape: heat transfer
Width: 30mm
Length: 30mm
Thickness: 0.5mm
Thermal conductivity: 2.4W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: double-sided; glueless
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| ART.AGT-305 |
Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.5mm; 6W/mK; glueless
Type of tape: heat transfer
Width: 20mm
Length: 0.13m
Thickness: 0.5mm
Thermal conductivity: 6W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.5mm; 6W/mK; glueless
Type of tape: heat transfer
Width: 20mm
Length: 0.13m
Thickness: 0.5mm
Thermal conductivity: 6W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
auf Bestellung 75 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 13+ | 6.84 EUR |
| 15+ | 5.78 EUR |
| 16+ | 5.45 EUR |
| ART.AGT-306 |
Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.5mm; 6W/mK; glueless
Type of tape: heat transfer
Width: 30mm
Length: 30mm
Thickness: 0.5mm
Thermal conductivity: 6W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.5mm; 6W/mK; glueless
Type of tape: heat transfer
Width: 30mm
Length: 30mm
Thickness: 0.5mm
Thermal conductivity: 6W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
auf Bestellung 60 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 25+ | 3.4 EUR |
| 30+ | 2.88 EUR |
| 32+ | 2.7 EUR |
| ART.AGT-307 |
Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 200mm; L: 400mm; Thk: 0.5mm; 6W/mK; glueless
Type of tape: heat transfer
Width: 200mm
Length: 0.4m
Thickness: 0.5mm
Thermal conductivity: 6W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 200mm; L: 400mm; Thk: 0.5mm; 6W/mK; glueless
Type of tape: heat transfer
Width: 200mm
Length: 0.4m
Thickness: 0.5mm
Thermal conductivity: 6W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| ART.AGT-309 |
|
Hersteller: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; white; silicon based,do not conduct; 800g
Type of chemical agent: heat transfer paste
Colour: white
Agent features: do not conduct; silicon based
Thermal conductivity: 0.88W/mK
Kind of package: cartridge
Net weight: 0.8kg
Signal word: Warning
Operating temperature: -50...250°C
Density: 2.7g/cm3 @ 20°C
Dielectric constant: 4.7
Flash point: 350°C
Name: PASTA SILIKONOWA H2
Agent application: electronic equipment; heatsinks; Household equipment
Application: facilitates heat transfer
GHS Code: GHS09
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Appearance: paste
Category: Heat conductive compounds
Description: Heat transfer paste; white; silicon based,do not conduct; 800g
Type of chemical agent: heat transfer paste
Colour: white
Agent features: do not conduct; silicon based
Thermal conductivity: 0.88W/mK
Kind of package: cartridge
Net weight: 0.8kg
Signal word: Warning
Operating temperature: -50...250°C
Density: 2.7g/cm3 @ 20°C
Dielectric constant: 4.7
Flash point: 350°C
Name: PASTA SILIKONOWA H2
Agent application: electronic equipment; heatsinks; Household equipment
Application: facilitates heat transfer
GHS Code: GHS09
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Appearance: paste
auf Bestellung 10 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 2+ | 50.66 EUR |
| 5+ | 48.2 EUR |
| ART.AGT-311 |
|
Hersteller: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; white; silicon based,do not conduct; 400g
Type of chemical agent: heat transfer paste
Colour: white
Agent features: do not conduct; silicon based
Thermal conductivity: 0.88W/mK
Kind of package: cartridge
Net weight: 400g
Signal word: Warning
Operating temperature: -50...250°C
Density: 1.37g/cm3 @ 20°C
Dielectric constant: 4.7
Flash point: 350°C
Name: PASTA SILIKONOWA H3
Agent application: heatsinks
Application: facilitates heat transfer
GHS Code: GHS09
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Appearance: paste
Category: Heat conductive compounds
Description: Heat transfer paste; white; silicon based,do not conduct; 400g
Type of chemical agent: heat transfer paste
Colour: white
Agent features: do not conduct; silicon based
Thermal conductivity: 0.88W/mK
Kind of package: cartridge
Net weight: 400g
Signal word: Warning
Operating temperature: -50...250°C
Density: 1.37g/cm3 @ 20°C
Dielectric constant: 4.7
Flash point: 350°C
Name: PASTA SILIKONOWA H3
Agent application: heatsinks
Application: facilitates heat transfer
GHS Code: GHS09
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Appearance: paste
auf Bestellung 12 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 3+ | 31.24 EUR |
| 6+ | 29.71 EUR |
| ART.AGT-314 |
|
Hersteller: AG TERMOPASTY
Category: Encapsulating materials
Description: Silicone encapsulating compound; white; -50÷180°C; 1.2g/cm3
Type of chemical agent: silicone encapsulating compound
Colour: white
Application: sealing and encapsulation of electronic circuits
Shore hardness: 20
Operating temperature: -50...180°C
Thermal conductivity: 1.5W/mK
Density: 1.2g/cm3
Dielectric strength: 14.4kV/mm
Mix ratio: 1:1
Bonding time: 70min
Appearance: liquid
Surface resistance: <22TΩ
Agent features: condensation cure; two-component
Net weight: 1kg
Category: Encapsulating materials
Description: Silicone encapsulating compound; white; -50÷180°C; 1.2g/cm3
Type of chemical agent: silicone encapsulating compound
Colour: white
Application: sealing and encapsulation of electronic circuits
Shore hardness: 20
Operating temperature: -50...180°C
Thermal conductivity: 1.5W/mK
Density: 1.2g/cm3
Dielectric strength: 14.4kV/mm
Mix ratio: 1:1
Bonding time: 70min
Appearance: liquid
Surface resistance: <22TΩ
Agent features: condensation cure; two-component
Net weight: 1kg
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| ART.AGT-315 |
|
Hersteller: AG TERMOPASTY
Category: Encapsulating materials
Description: Silicone encapsulating compound; transparent; 50÷180°C; 11kV/mm
Type of chemical agent: silicone encapsulating compound
Colour: transparent
Application: sealing and encapsulation of electronic circuits
Shore hardness: 12
Operating temperature: 50...180°C
Density: 980mg/cm3
Dielectric strength: 11kV/mm
Mix ratio: 3:2
Bonding time: 60min
Appearance: liquid
Surface resistance: <480TΩ
Agent features: condensation cure; two-component
Net weight: 0.1kg
Category: Encapsulating materials
Description: Silicone encapsulating compound; transparent; 50÷180°C; 11kV/mm
Type of chemical agent: silicone encapsulating compound
Colour: transparent
Application: sealing and encapsulation of electronic circuits
Shore hardness: 12
Operating temperature: 50...180°C
Density: 980mg/cm3
Dielectric strength: 11kV/mm
Mix ratio: 3:2
Bonding time: 60min
Appearance: liquid
Surface resistance: <480TΩ
Agent features: condensation cure; two-component
Net weight: 0.1kg
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| ART.AGT-316 |
|
Hersteller: AG TERMOPASTY
Category: Encapsulating materials
Description: Silicone encapsulating compound; transparent; 50÷180°C; 11kV/mm
Type of chemical agent: silicone encapsulating compound
Colour: transparent
Application: sealing and encapsulation of electronic circuits
Shore hardness: 12
Operating temperature: 50...180°C
Density: 980mg/cm3
Dielectric strength: 11kV/mm
Mix ratio: 3:2
Bonding time: 60min
Appearance: liquid
Surface resistance: <480TΩ
Agent features: condensation cure; two-component
Net weight: 1kg
Category: Encapsulating materials
Description: Silicone encapsulating compound; transparent; 50÷180°C; 11kV/mm
Type of chemical agent: silicone encapsulating compound
Colour: transparent
Application: sealing and encapsulation of electronic circuits
Shore hardness: 12
Operating temperature: 50...180°C
Density: 980mg/cm3
Dielectric strength: 11kV/mm
Mix ratio: 3:2
Bonding time: 60min
Appearance: liquid
Surface resistance: <480TΩ
Agent features: condensation cure; two-component
Net weight: 1kg
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| ART.AGT-317 |
|
Hersteller: AG TERMOPASTY
Category: Encapsulating materials
Description: Silicone encapsulating compound; white; -50÷180°C; 1.2g/cm3
Type of chemical agent: silicone encapsulating compound
Colour: white
Application: sealing and encapsulation of electronic circuits
Shore hardness: 20
Operating temperature: -50...180°C
Thermal conductivity: 1.5W/mK
Density: 1.2g/cm3
Dielectric strength: 14.4kV/mm
Mix ratio: 1:1
Bonding time: 70min
Appearance: liquid
Surface resistance: <22TΩ
Agent features: condensation cure; two-component
Net weight: 0.1kg
Category: Encapsulating materials
Description: Silicone encapsulating compound; white; -50÷180°C; 1.2g/cm3
Type of chemical agent: silicone encapsulating compound
Colour: white
Application: sealing and encapsulation of electronic circuits
Shore hardness: 20
Operating temperature: -50...180°C
Thermal conductivity: 1.5W/mK
Density: 1.2g/cm3
Dielectric strength: 14.4kV/mm
Mix ratio: 1:1
Bonding time: 70min
Appearance: liquid
Surface resistance: <22TΩ
Agent features: condensation cure; two-component
Net weight: 0.1kg
auf Bestellung 11 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 4+ | 21.49 EUR |
| ART.AGT-318 |
|
Hersteller: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; white; silicon based,do not conduct; 5kg
Type of chemical agent: heat transfer paste
Colour: white
Application: facilitates heat transfer
Operating temperature: -50...250°C
Thermal conductivity: 0.88W/mK
Density: 2.7g/cm3 @ 20°C
Appearance: paste
Agent features: do not conduct; silicon based
Net weight: 5kg
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Name: PASTA SILIKONOWA H2
Dielectric constant: 4.7
Flash point: 350°C
Kind of package: bucket
Signal word: Warning
Agent application: electronic equipment; heatsinks; Household equipment
GHS Code: GHS09
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Category: Heat conductive compounds
Description: Heat transfer paste; white; silicon based,do not conduct; 5kg
Type of chemical agent: heat transfer paste
Colour: white
Application: facilitates heat transfer
Operating temperature: -50...250°C
Thermal conductivity: 0.88W/mK
Density: 2.7g/cm3 @ 20°C
Appearance: paste
Agent features: do not conduct; silicon based
Net weight: 5kg
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Name: PASTA SILIKONOWA H2
Dielectric constant: 4.7
Flash point: 350°C
Kind of package: bucket
Signal word: Warning
Agent application: electronic equipment; heatsinks; Household equipment
GHS Code: GHS09
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| ART.AGT-323 |
|
Hersteller: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin-free; Water Soluble; liquid; bottle; 0.05l; Flux: SW13
Type of flux: rosin-free
Appearance: liquid
Capacity: 50ml
Soldering equipment features: corrosive
Signal word: Danger
Hazard statements: H302: Harmful if swallowed.; H314: Causes severe skin burns and eye damage.; H317: May cause an allergic skin reaction.; H335: May cause respiratory irritation.; H412: Harmful to aquatic life with long lasting effects.
Precautionary statements: P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.
GHS Code: GHS05; GHS07
Flux name: SW13
Conform to the norm: PN EN 29454
Manufacturer series: TS-81
Related items: ZD-171
Solids content: 10%
Density: 1.27g/cm3 @ 20°C
Flux residues: corrosive; yes
Applications of soldering equipment: nichrome alloy soldering; steel soldering (also acid-proof steel)
Kind of package: bottle
Standard equipment: fine brush
Kind of flux: Water Soluble
Category: Fluxes
Description: Flux: rosin-free; Water Soluble; liquid; bottle; 0.05l; Flux: SW13
Type of flux: rosin-free
Appearance: liquid
Capacity: 50ml
Soldering equipment features: corrosive
Signal word: Danger
Hazard statements: H302: Harmful if swallowed.; H314: Causes severe skin burns and eye damage.; H317: May cause an allergic skin reaction.; H335: May cause respiratory irritation.; H412: Harmful to aquatic life with long lasting effects.
Precautionary statements: P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.
GHS Code: GHS05; GHS07
Flux name: SW13
Conform to the norm: PN EN 29454
Manufacturer series: TS-81
Related items: ZD-171
Solids content: 10%
Density: 1.27g/cm3 @ 20°C
Flux residues: corrosive; yes
Applications of soldering equipment: nichrome alloy soldering; steel soldering (also acid-proof steel)
Kind of package: bottle
Standard equipment: fine brush
Kind of flux: Water Soluble
auf Bestellung 13 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 12+ | 7.33 EUR |
| 13+ | 6.56 EUR |
| ART.AGT-324 |
|
Hersteller: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; grey; CARBON; 15.2W/mK; 1g
Type of chemical agent: heat transfer paste
Colour: grey
Thermal conductivity: 15.2W/mK
Kind of package: syringe
Net weight: 1g
Operating temperature: -20...130°C
Name: CARBON
Agent application: heatsinks
Application: facilitates heat transfer
GHS Code: GHS09
Hazard statements: H411: Toxic to aquatic life with long lasting effects
Precautionary statements: P273: Avoid release to the environment.; P391: Collect spillage.; P501: Dispose of contents/container to ...
Appearance: paste
Category: Heat conductive compounds
Description: Heat transfer paste; grey; CARBON; 15.2W/mK; 1g
Type of chemical agent: heat transfer paste
Colour: grey
Thermal conductivity: 15.2W/mK
Kind of package: syringe
Net weight: 1g
Operating temperature: -20...130°C
Name: CARBON
Agent application: heatsinks
Application: facilitates heat transfer
GHS Code: GHS09
Hazard statements: H411: Toxic to aquatic life with long lasting effects
Precautionary statements: P273: Avoid release to the environment.; P391: Collect spillage.; P501: Dispose of contents/container to ...
Appearance: paste
auf Bestellung 49 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 8+ | 11.63 EUR |
| 9+ | 10.52 EUR |
| 10+ | 9.41 EUR |
| ART.AGT-325 |
|
Hersteller: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; grey; CARBON; 15.2W/mK; 3g
Type of chemical agent: heat transfer paste
Colour: grey
Thermal conductivity: 15.2W/mK
Kind of package: syringe
Net weight: 3g
Operating temperature: -20...130°C
Name: CARBON
Agent application: heatsinks
Application: facilitates heat transfer
GHS Code: GHS09
Hazard statements: H411: Toxic to aquatic life with long lasting effects
Precautionary statements: P273: Avoid release to the environment.; P391: Collect spillage.; P501: Dispose of contents/container to ...
Appearance: paste
Category: Heat conductive compounds
Description: Heat transfer paste; grey; CARBON; 15.2W/mK; 3g
Type of chemical agent: heat transfer paste
Colour: grey
Thermal conductivity: 15.2W/mK
Kind of package: syringe
Net weight: 3g
Operating temperature: -20...130°C
Name: CARBON
Agent application: heatsinks
Application: facilitates heat transfer
GHS Code: GHS09
Hazard statements: H411: Toxic to aquatic life with long lasting effects
Precautionary statements: P273: Avoid release to the environment.; P391: Collect spillage.; P501: Dispose of contents/container to ...
Appearance: paste
auf Bestellung 28 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 4+ | 21.68 EUR |
| 5+ | 19.84 EUR |
| ART.AGT-326 |
|
Hersteller: AG TERMOPASTY
Category: Materials for PCB production
Description: Chemical agent: developer; blister,plastic container; 110g
Type of chemical agent: developer
Kind of package: blister; plastic container
Signal word: Danger
Hazard statements: H290: May be corrosive to metals.; H314: Causes severe skin burns and eye damage.; H335: May cause respiratory irritation.
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P262: Do not get in eyes, on skin, or on clothing.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P406: Store in corrosive resistant/... container with a resistant inner liner.; P501: Dispose of contents/container to ...
GHS Code: GHS05; GHS07
Net weight: 110g
Agent application: for photoresists; PCBs
Category: Materials for PCB production
Description: Chemical agent: developer; blister,plastic container; 110g
Type of chemical agent: developer
Kind of package: blister; plastic container
Signal word: Danger
Hazard statements: H290: May be corrosive to metals.; H314: Causes severe skin burns and eye damage.; H335: May cause respiratory irritation.
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P262: Do not get in eyes, on skin, or on clothing.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P406: Store in corrosive resistant/... container with a resistant inner liner.; P501: Dispose of contents/container to ...
GHS Code: GHS05; GHS07
Net weight: 110g
Agent application: for photoresists; PCBs
auf Bestellung 8 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 8+ | 10.64 EUR |
| ART.AGT-327 |
|
Hersteller: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; silicon based; PASTA HP; 1.5W/mK; 500g
Application: facilitates heat transfer
GHS Code: GHS09
Hazard statements: H411: Toxic to aquatic life with long lasting effects
Agent application: heatsinks
Type of chemical agent: heat transfer paste
Precautionary statements: P273: Avoid release to the environment.; P391: Collect spillage.; P501: Dispose of contents/container to ...
Name: PASTA HP
Appearance: paste
Agent features: silicon based
Resistance to: temperature
Signal word: Warning
Operating temperature: -50...250°C
Thermal conductivity: 1.5W/mK
Dielectric constant: 5
Net weight: 0.5kg
Kind of package: cartridge
Category: Heat conductive compounds
Description: Heat transfer paste; silicon based; PASTA HP; 1.5W/mK; 500g
Application: facilitates heat transfer
GHS Code: GHS09
Hazard statements: H411: Toxic to aquatic life with long lasting effects
Agent application: heatsinks
Type of chemical agent: heat transfer paste
Precautionary statements: P273: Avoid release to the environment.; P391: Collect spillage.; P501: Dispose of contents/container to ...
Name: PASTA HP
Appearance: paste
Agent features: silicon based
Resistance to: temperature
Signal word: Warning
Operating temperature: -50...250°C
Thermal conductivity: 1.5W/mK
Dielectric constant: 5
Net weight: 0.5kg
Kind of package: cartridge
auf Bestellung 6 Stücke:
Lieferzeit 14-21 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 3+ | 37.44 EUR |
| ART.AGT-062 Wazelina 0.50kg |
|
Hersteller: AG TERMOPASTY
Technical petroleum vaseline; 500g; Max. operating temperature. 30°C; Used to protect electrical contacts andbearing lubrication; ART.AGT-062 AG Termopasty CH WT500
Anzahl je Verpackung: 2 Stücke
Technical petroleum vaseline; 500g; Max. operating temperature. 30°C; Used to protect electrical contacts andbearing lubrication; ART.AGT-062 AG Termopasty CH WT500
Anzahl je Verpackung: 2 Stücke
auf Bestellung 12 Stücke:
Lieferzeit 7-14 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 2+ | 27.64 EUR |
| ART.AGT-118 AG Silver 100g |
Hersteller: AG TERMOPASTY
Heat conductive paste based on Silver; 100g; Thermal conductivity >3.8W/m2; Tthermal conductivity much higher than typical carbon-silicon compounds; ART.AGT-118 AG Silver AG Termopasty CH Silver-100
Anzahl je Verpackung: 2 Stücke
Heat conductive paste based on Silver; 100g; Thermal conductivity >3.8W/m2; Tthermal conductivity much higher than typical carbon-silicon compounds; ART.AGT-118 AG Silver AG Termopasty CH Silver-100
Anzahl je Verpackung: 2 Stücke
auf Bestellung 4 Stücke:
Lieferzeit 7-14 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 2+ | 107.7 EUR |
| ART.AGT-127 Pasta HP 100g |
Hersteller: AG TERMOPASTY
HP heat conductive paste; 100g; Thermal conductivity ~1.5W/m2; Essential for the proper operation of all types of temperature sensors; ART.AGT-127 Paste HP AG Termopasty CH PaTermHP100
Anzahl je Verpackung: 2 Stücke
HP heat conductive paste; 100g; Thermal conductivity ~1.5W/m2; Essential for the proper operation of all types of temperature sensors; ART.AGT-127 Paste HP AG Termopasty CH PaTermHP100
Anzahl je Verpackung: 2 Stücke
auf Bestellung 32 Stücke:
Lieferzeit 7-14 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 2+ | 34.76 EUR |