Produkte > AG TERMOPASTY > Alle Produkte des Herstellers AG TERMOPASTY (572) > Seite 2 nach 10

Hersteller: AG TERMOPASTY
Category: Lubricants
Description: Oil; colourless; silicone; liquid; plastic container; 100ml
Type of chemical agent: oil
Colour: colourless
Application: isolation; lubrication; sealed
Capacity: 0.1l
Kind of package: plastic container
Agent application: bearings; plastics
Kind of agent: silicone
Appearance: liquid
Name: OLEJ SILIKONOWY

Hersteller: AG TERMOPASTY
Category: Lubricants
Description: Oil; colourless; vaseline; liquid; plastic container; 50ml
Type of chemical agent: oil
Colour: colourless
Appearance: liquid
Kind of package: plastic container
Agent application: metals; plastics; rubber
Application: lubrication; protection against corrosion
Kind of agent: vaseline
Capacity: 50ml

Hersteller: AG TERMOPASTY
Category: Lubricants
Description: Oil; colourless; vaseline; liquid; plastic container; 100ml
Type of chemical agent: oil
Colour: colourless
Appearance: liquid
Kind of package: plastic container
Agent application: metals; plastics; rubber
Application: lubrication; protection against corrosion
Kind of agent: vaseline
Capacity: 0.1l

Hersteller: AG TERMOPASTY
Category: Lubricants
Description: Oil; colourless; vaseline; spray; can; 300ml; Signal word: Danger
Type of chemical agent: oil
Colour: colourless
Appearance: spray
Kind of package: can
Agent application: metals; plastics; rubber
Application: lubrication; protection against corrosion
Kind of agent: vaseline
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.
Signal word: Danger
Capacity: 0.3l
GHS Code: GHS02

Hersteller: AG TERMOPASTY
Category: Computer Accessories - Others
Description: For remote control
Type of PC accessories: for remote control
Kit contents: glue; rubber button for remote controller x100

Hersteller: AG TERMOPASTY
Category: Protection & screen coatings
Description: Varnish; graphite; 2ml; Application: creates conducting coating
Capacity: 2ml
Kind of package: tube
Type of chemical agent: varnish
Application: creates conducting coating
Agent application: electronic equipment
Agent features: two-component
Grease ingredients: graphite
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P243: Take precautionary measures against static discharge.; P271: Use only outdoors or in a well-ventilated area.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Hazard statements: H225: Highly flammable liquid and vapour.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness
Signal word: Danger
GHS Code: GHS02; GHS07

Hersteller: AG TERMOPASTY
Category: Solders - other: lead free
Description: Solder paste; lead free; Sn96,5Ag3Cu0,5; syringe; 25÷45um; 6g
Type of solder: solder paste
Appearance: paste
Kind of solder: lead free
Alloy composition: Sn96,5Ag3Cu0,5
Kind of flux: halide-free; No Clean; REL0
Version: for soft soldering
Melting point: 217°C
Flux content: 12%
Grain size: 25...45µm
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362: Take off contaminated clothing and wash before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
Signal word: Warning
GHS Code: GHS07
Flux residues: non-corrosive; transparent; yes
Caution!: Store in temperature about 8 °C
Binder weight: 6g
Agent features: lead free; residues can be cleaned with alcohol-based agents; residues need no cleaning
Kind of package: syringe

Hersteller: AG TERMOPASTY
Category: Solders - other: lead free
Description: Solder paste; lead free; Sn96,5Ag3Cu0,5; syringe; 25÷45um; 20g
Type of solder: solder paste
Appearance: paste
Kind of solder: lead free
Alloy composition: Sn96,5Ag3Cu0,5
Kind of flux: halide-free; No Clean; REL0
Version: for soft soldering
Melting point: 217°C
Capacity: 5ml
Flux content: 15%
Grain size: 25...45µm
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362: Take off contaminated clothing and wash before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
Signal word: Warning
GHS Code: GHS07
Flux residues: non-corrosive; transparent; yes
Caution!: Store in temperature about 8 °C
Binder weight: 20g
Agent features: lead free; residues can be cleaned with alcohol-based agents; residues need no cleaning
Kind of package: syringe

Hersteller: AG TERMOPASTY
Category: Solders - other: lead free
Description: Solder paste; lead free; Sn96,5Ag3Cu0,5; syringe; 25÷45um; 40g
Type of solder: solder paste
Appearance: paste
Kind of solder: lead free
Alloy composition: Sn96,5Ag3Cu0,5
Kind of flux: halide-free; No Clean; REL0
Version: for soft soldering
Melting point: 217°C
Capacity: 10ml
Flux content: 15%
Grain size: 25...45µm
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362: Take off contaminated clothing and wash before reuse.; P501: Dispose of contents/container to ...
Hazard statements: H317: May cause an allergic skin reaction.
Signal word: Warning
GHS Code: GHS07
Flux residues: non-corrosive; transparent; yes
Caution!: Store in temperature about 8 °C
Binder weight: 40g
Agent features: lead free; residues can be cleaned with alcohol-based agents; residues need no cleaning
Kind of package: syringe

Hersteller: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; resin; can; 20ml; Signal word: Warning
Type of flux: rosin based
Appearance: resin
Kind of package: can
Signal word: Warning
Hazard statements: H317: May cause an allergic skin reaction.
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P272: Contaminated work clothing should not be allowed out of the workplace.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P363: Wash contaminated clothing before reuse; P501: Dispose of contents/container to ...
GHS Code: GHS07
Soldering equipment features: activated with adipic acid (2,5%)
Flux residues: amber; yes
Capacity: 20ml

Hersteller: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; resin; can; Signal word: Warning; 40g
Type of flux: rosin based
Appearance: resin
Kind of package: can
Signal word: Warning
Hazard statements: H317: May cause an allergic skin reaction.
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P272: Contaminated work clothing should not be allowed out of the workplace.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P363: Wash contaminated clothing before reuse; P501: Dispose of contents/container to ...
GHS Code: GHS07
Soldering equipment features: activated with adipic acid (2,5%)
Flux residues: amber; yes
Net weight: 40g

Hersteller: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; resin; can; 0.1l; Signal word: Warning
Type of flux: rosin based
Appearance: resin
Kind of package: can
Signal word: Warning
Hazard statements: H317: May cause an allergic skin reaction.
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P272: Contaminated work clothing should not be allowed out of the workplace.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P363: Wash contaminated clothing before reuse; P501: Dispose of contents/container to ...
GHS Code: GHS07
Soldering equipment features: activated with adipic acid (2,5%)
Flux residues: amber; yes
Capacity: 0.1l

Hersteller: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; halide,RMA; paste; can; 50÷200°C; 40g
Type of flux: rosin based
Kind of flux: halide; RMA
Appearance: paste
Kind of package: can
Applications of soldering equipment: soldering of galvanised and nickel plated elements
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H318: Causes serious eye damage
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.
GHS Code: GHS07; GHS09
Operating temperature: 50...200°C
Flux residues: non-corrosive; yes
Net weight: 40g

Hersteller: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; halide,RMA; paste; can; 0.1l; 50÷200°C
Type of flux: rosin based
Kind of flux: halide; RMA
Appearance: paste
Kind of package: can
Applications of soldering equipment: soldering of galvanised and nickel plated elements
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H318: Causes serious eye damage
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.
GHS Code: GHS07; GHS09
Operating temperature: 50...200°C
Flux residues: non-corrosive; yes
Capacity: 0.1l

Hersteller: AG TERMOPASTY
Category: Cleaning & maintaining products
Description: Cleaning agent; 200ml; spray; can; Signal word: Danger
Type of chemical agent: cleaning agent
Application: cleaning; dust removing; impurities removing
Agent application: LCD/TFT displays; screens
Appearance: spray
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.
Signal word: Danger
GHS Code: GHS02
Capacity: 0.2l
Kind of package: can

Hersteller: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; halide-free,Lead Free,No Clean; liquid; 15ml
Type of flux: rosin based
Kind of flux: halide-free; Lead Free; No Clean
Appearance: liquid
Kind of package: bottle
Capacity: 15ml
Soldering equipment features: can be washed down with alcohol based agents
Solids content: 0...5%
Density: 794mg/cm³ @ 25°C
Signal word: Danger
Hazard statements: H225: Highly flammable liquid and vapour.; H304: May be fatal if swallowed and enters airways.; H317: May cause an allergic skin reaction.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P235: Keep cool.; P241: Use explosion-proof electrical/ventilating/lighting/.../equipment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P501: Dispose of contents/container to ...
GHS Code: GHS02; GHS07; GHS08
Flux residues: non-corrosive

Hersteller: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; No Clean; liquid; bottle; 50ml; 860mg/cm3@20°C
Type of flux: rosin based
Kind of flux: No Clean
Appearance: liquid
Kind of package: bottle
Applications of soldering equipment: tinning elements coated with polyurethane varnishes
Signal word: Danger
Hazard statements: H225: Highly flammable liquid and vapour.; H317: May cause an allergic skin reaction.; H318: Causes serious eye damage; H336: May cause drowsiness or dizziness; H373: May cause damage to organs
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P370 + P378: In case of fire: Use ...for extinction.
GHS Code: GHS02; GHS05; GHS07; GHS08
Soldering equipment features: can be washed down with alcohol based agents
Related items: ZD-171
Density: 860mg/cm³ @ 20°C
Solids content: 24%
Name: TK83
Flux name: SW26
Conform to the norm: PN EN 29454
Capacity: 50ml

Hersteller: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; RMA; gel; syringe; 1.4ml; SMD soldering
Type of flux: rosin based
Kind of flux: RMA
Appearance: gel
Kind of package: syringe
Applications of soldering equipment: SMD soldering
Signal word: Warning
Hazard statements: H317: May cause an allergic skin reaction.
Precautionary statements: P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P321: Specific treatment (see ...on this label).; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362: Take off contaminated clothing and wash before reuse.; P501: Dispose of contents/container to ...
GHS Code: GHS07
Capacity: 1.4ml

Hersteller: AG TERMOPASTY
Category: Cleaning & maintaining products
Description: Cleaner; 1l; liquid; plastic container; Signal word: Danger
Kind of package: plastic container
Type of chemical agent: cleaner
Application: flux removing; impurities removing
Agent application: PCBs
Agent features: based on alcohol
Appearance: liquid
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P271: Use only outdoors or in a well-ventilated area.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
Hazard statements: H225: Highly flammable liquid and vapour.; H304: May be fatal if swallowed and enters airways.; H315: Causes skin irritation; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness; H411: Toxic to aquatic life with long lasting effects
Signal word: Danger
GHS Code: GHS02; GHS07; GHS08; GHS09
Capacity: 1l

Hersteller: AG TERMOPASTY
Category: Cleaning & maintaining products
Description: Cleaner; 1l; liquid; plastic container; Features: water based
Type of chemical agent: cleaner
Application: flux removing; impurities removing
Agent features: water based
Capacity: 1l
Kind of package: plastic container
Agent application: PCBs; SMD stencil
Appearance: liquid

Hersteller: AG TERMOPASTY
Category: Protection & screen coatings
Description: Silicone paste; colourless; paste; PASTA SILIKONOWA N; -40÷200°C
Type of chemical agent: silicone paste
Colour: colourless
Appearance: paste
Name: PASTA SILIKONOWA N
Kind of package: tube
Operating temperature: -40...200°C
Agent application: heatsinks
Application: isolation; protection against corrosion
Net weight: 3.5g

Hersteller: AG TERMOPASTY
Category: Protection & screen coatings
Description: Silicone paste; colourless; paste; PASTA SILIKONOWA N; -40÷200°C
Type of chemical agent: silicone paste
Colour: colourless
Appearance: paste
Name: PASTA SILIKONOWA N
Kind of package: plastic container
Operating temperature: -40...200°C
Agent application: heatsinks
Application: isolation; protection against corrosion
Net weight: 60g

Hersteller: AG TERMOPASTY
Category: Protection & screen coatings
Description: Silicone paste; colourless; paste; PASTA SILIKONOWA N; -40÷200°C
Type of chemical agent: silicone paste
Colour: colourless
Appearance: paste
Name: PASTA SILIKONOWA N
Kind of package: plastic container
Operating temperature: -40...200°C
Agent application: heatsinks
Application: isolation; protection against corrosion
Net weight: 1kg

Hersteller: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; white; silicon based,do not conduct; 25g
Type of chemical agent: heat transfer paste
Colour: white
Application: facilitates heat transfer
Operating temperature: -50...250°C
Agent features: do not conduct; silicon based
Net weight: 25g
Kind of package: syringe
Agent application: heatsinks
Flash point: 350°C
Appearance: paste
Name: PASTA SILIKONOWA H
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Signal word: Warning
GHS Code: GHS09
Dielectric constant: 4.7
Min. breakdown voltage: 30V/mm
Thermal conductivity: 0.88W/mK

Hersteller: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; white; silicon based,do not conduct; 100g
Type of chemical agent: heat transfer paste
Colour: white
Application: facilitates heat transfer
Operating temperature: -50...250°C
Agent features: do not conduct; silicon based
Net weight: 0.1kg
Kind of package: plastic container
Agent application: heatsinks
Flash point: 350°C
Appearance: paste
Name: PASTA SILIKONOWA H
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Signal word: Warning
GHS Code: GHS09
Dielectric constant: 4.7
Min. breakdown voltage: 30V/mm
Thermal conductivity: 0.88W/mK

Hersteller: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; white; silicon based,do not conduct; 1kg
Type of chemical agent: heat transfer paste
Colour: white
Application: facilitates heat transfer
Operating temperature: -50...250°C
Agent features: do not conduct; silicon based
Net weight: 1kg
Kind of package: plastic container
Agent application: heatsinks
Flash point: 350°C
Appearance: paste
Name: PASTA SILIKONOWA H
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Signal word: Warning
GHS Code: GHS09
Dielectric constant: 4.7
Min. breakdown voltage: 30V/mm
Thermal conductivity: 0.88W/mK

Hersteller: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; white; silicon based,do not conduct; 5kg
Type of chemical agent: heat transfer paste
Colour: white
Application: facilitates heat transfer
Operating temperature: -50...250°C
Thermal conductivity: 0.88W/mK
Dielectric constant: 4.7
Appearance: paste
Agent features: do not conduct; silicon based
Net weight: 5kg
Min. breakdown voltage: 30V/mm
Name: PASTA SILIKONOWA H
Kind of package: bucket
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Signal word: Warning
GHS Code: GHS09
Flash point: 350°C
Agent application: heatsinks

Hersteller: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; red; on copper basis; copper; 1.5ml; 3.1W/mK
Type of chemical agent: heat transfer paste
Colour: red
Application: facilitates heat transfer
Operating temperature: -50...250°C
Thermal conductivity: 3.1W/mK
Density: 2.9g/cm³ @ 20°C
Appearance: paste
Agent features: on copper basis
Name: AG Cooper
Precautionary statements: P264: Wash ...thoroughly after handling; P270: Do no eat, drink or smoke when using this product.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P312: Call a POISON CENTER or doctor/physician if you feel unwell.; P337 + P313: If eye irritation persists: Get medical advice/attention
Hazard statements: H302: Harmful if swallowed.; H319: Causes serious eye irritation; H335: May cause respiratory irritation.; H412: Harmful to aquatic life with long lasting effects.
Signal word: Warning
GHS Code: GHS07
Capacity: 1.5ml
Kind of package: syringe
Agent application: heatsinks
Grease ingredients: copper

Hersteller: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; red; on copper basis; copper; 14ml; 3.1W/mK
Type of chemical agent: heat transfer paste
Colour: red
Application: facilitates heat transfer
Operating temperature: -50...250°C
Thermal conductivity: 3.1W/mK
Density: 2.9g/cm³ @ 20°C
Appearance: paste
Agent features: on copper basis
Name: AG Cooper
Precautionary statements: P264: Wash ...thoroughly after handling; P270: Do no eat, drink or smoke when using this product.; P273: Avoid release to the environment.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P312: Call a POISON CENTER or doctor/physician if you feel unwell.; P337 + P313: If eye irritation persists: Get medical advice/attention
Hazard statements: H302: Harmful if swallowed.; H319: Causes serious eye irritation; H335: May cause respiratory irritation.; H412: Harmful to aquatic life with long lasting effects.
Signal word: Warning
GHS Code: GHS07
Capacity: 14ml
Kind of package: syringe
Agent application: heatsinks
Grease ingredients: copper

Hersteller: AG TERMOPASTY
Category: Lubricants
Description: Vaseline; white; paste; plastic container; Features: acid-free
Type of chemical agent: vaseline
Colour: white
Appearance: paste
Kind of package: plastic container
Agent application: bearings; electrical contacts; plastics; rubber
Application: lubrication; protection against corrosion
Agent features: acid-free
Net weight: 0.5kg

Hersteller: AG TERMOPASTY
Category: Lubricants
Description: Grease; paste; Ingredients: PTFE,silicone; tube; SMAR TF; 3.5g
Type of chemical agent: grease
Application: lubrication; preservation
Agent features: good resistance to oxygenation, water solution of acids
Net weight: 3.5g
Kind of package: tube
Agent application: electronic equipment; gears; plastics
Grease ingredients: PTFE; silicone
Appearance: paste
Name: SMAR TF

Hersteller: AG TERMOPASTY
Category: Lubricants
Description: Grease; paste; Ingredients: PTFE,silicone; plastic container
Type of chemical agent: grease
Appearance: paste
Grease ingredients: PTFE; silicone
Kind of package: plastic container
Application: lubrication; preservation
Agent features: good resistance to oxygenation, water solution of acids
Net weight: 20g
Name: SMAR TF
Agent application: electronic equipment; gears; plastics

Hersteller: AG TERMOPASTY
Category: Lubricants
Description: Grease; paste; Ingredients: PTFE,silicone; plastic container
Type of chemical agent: grease
Application: lubrication; preservation
Agent features: good resistance to oxygenation, water solution of acids
Net weight: 60g
Kind of package: plastic container
Agent application: electronic equipment; gears; plastics
Grease ingredients: PTFE; silicone
Appearance: paste
Name: SMAR TF

Hersteller: AG TERMOPASTY
Category: Lubricants
Description: Grease; paste; Ingredients: PTFE,silicone; plastic container
Type of chemical agent: grease
Appearance: paste
Grease ingredients: PTFE; silicone
Kind of package: plastic container
Application: lubrication; preservation
Agent features: good resistance to oxygenation, water solution of acids
Net weight: 1kg
Name: SMAR TF
Agent application: electronic equipment; gears; plastics

Hersteller: AG TERMOPASTY
Category: Lubricants
Description: Vaseline; white; paste; plastic container; Features: acid-free
Type of chemical agent: vaseline
Colour: white
Appearance: paste
Kind of package: plastic container
Agent application: bearings; electrical contacts; plastics; rubber
Application: lubrication; protection against corrosion
Agent features: acid-free
Net weight: 20g

Hersteller: AG TERMOPASTY
Category: Lubricants
Description: Vaseline; white; paste; can; Features: acid-free; 35g
Type of chemical agent: vaseline
Colour: white
Appearance: paste
Kind of package: can
Agent application: bearings; electrical contacts; plastics; rubber
Application: lubrication; protection against corrosion
Agent features: acid-free
Net weight: 35g

Hersteller: AG TERMOPASTY
Category: Lubricants
Description: Vaseline; white; paste; plastic container; Features: acid-free
Type of chemical agent: vaseline
Colour: white
Appearance: paste
Kind of package: plastic container
Agent application: bearings; electrical contacts; plastics; rubber
Application: lubrication; protection against corrosion
Agent features: acid-free
Net weight: 900g

Hersteller: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin-free; halide-free,No Clean,Water Soluble; liquid
Type of flux: rosin-free
Kind of flux: halide-free; No Clean; Water Soluble
Appearance: liquid
Kind of package: bottle
Applications of soldering equipment: tinning elements coated with polyurethane varnishes
Signal word: Danger
Hazard statements: H225: Highly flammable liquid and vapour.; H317: May cause an allergic skin reaction.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.
GHS Code: GHS02; GHS07
Soldering equipment features: can be washed down with alcohol based agents; can be washed down with water based agents
Related items: ZD-171
Density: 860mg/cm³ @ 20°C
Solids content: 4%
Flux name: SW23
Conform to the norm: PN EN 29454
Capacity: 0.5l

Hersteller: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin-free; halide-free,No Clean,Water Soluble; liquid
Capacity: 1l
Applications of soldering equipment: tinning elements coated with polyurethane varnishes
Soldering equipment features: can be washed down with alcohol based agents
Type of flux: rosin-free
Kind of flux: halide-free; No Clean; Water Soluble
Appearance: liquid
Density: 860mg/cm³ @ 20°C
Solids content: 4%
Flux name: SW23
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.
Hazard statements: H225: Highly flammable liquid and vapour.; H317: May cause an allergic skin reaction.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness
Signal word: Danger
GHS Code: GHS02; GHS07
Conform to the norm: PN EN 29454
Kind of package: bottle
Related items: ZD-171

Hersteller: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; No Clean; liquid; bottle; 0.5l; 860mg/cm3@20°C
Type of flux: rosin based
Kind of flux: No Clean
Appearance: liquid
Kind of package: bottle
Applications of soldering equipment: tinning elements coated with polyurethane varnishes
Signal word: Danger
Hazard statements: H225: Highly flammable liquid and vapour.; H317: May cause an allergic skin reaction.; H318: Causes serious eye damage; H336: May cause drowsiness or dizziness; H373: May cause damage to organs
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P370 + P378: In case of fire: Use ...for extinction.
GHS Code: GHS02; GHS05; GHS07; GHS08
Soldering equipment features: can be washed down with alcohol based agents
Density: 860mg/cm³ @ 20°C
Solids content: 24%
Name: TK83
Conform to the norm: PN EN 29454
Capacity: 0.5l

Hersteller: AG TERMOPASTY
Category: Lubricants
Description: Vaseline; white; paste; sqeeze bottle with applicator; 65g
Type of chemical agent: vaseline
Colour: white
Appearance: paste
Kind of package: sqeeze bottle with applicator
Agent application: bearings; electrical contacts; plastics; rubber
Application: lubrication; protection against corrosion
Agent features: acid-free
Net weight: 65g

Hersteller: AG TERMOPASTY
Category: Lubricants
Description: Grease; paste; Ingredients: PTFE,silicone; SMAR TF; 65ml
Type of chemical agent: grease
Appearance: paste
Grease ingredients: PTFE; silicone
Kind of package: sqeeze bottle with applicator
Capacity: 65ml
Application: lubrication; preservation
Agent features: good resistance to oxygenation, water solution of acids
Name: SMAR TF
Agent application: electronic equipment; gears; plastics

Hersteller: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; RMA; gel; syringe; 14ml; SMD soldering
Type of flux: rosin based
Kind of flux: RMA
Appearance: gel
Kind of package: syringe
Applications of soldering equipment: SMD soldering
Signal word: Warning
Hazard statements: H317: May cause an allergic skin reaction.
Precautionary statements: P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P321: Specific treatment (see ...on this label).; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362: Take off contaminated clothing and wash before reuse.; P501: Dispose of contents/container to ...
GHS Code: GHS07
Capacity: 14ml

Hersteller: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; RMA; gel; can; SMD soldering
Type of flux: rosin based
Kind of flux: RMA
Appearance: gel
Kind of package: can
Applications of soldering equipment: SMD soldering
Signal word: Warning
Hazard statements: H317: May cause an allergic skin reaction.
Precautionary statements: P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P321: Specific treatment (see ...on this label).; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362: Take off contaminated clothing and wash before reuse.; P501: Dispose of contents/container to ...
GHS Code: GHS07

Hersteller: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; resin; bag; Signal word: Warning; 500g
Type of flux: rosin based
Appearance: resin
Kind of package: bag
Signal word: Warning
Hazard statements: H317: May cause an allergic skin reaction.
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P272: Contaminated work clothing should not be allowed out of the workplace.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P302 + P352: IF ON SKIN: Wash with plenty of soap and water; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P363: Wash contaminated clothing before reuse; P501: Dispose of contents/container to ...
GHS Code: GHS02
Soldering equipment features: activated with adipic acid (2,5%)
Flux residues: amber; yes
Net weight: 0.5kg

Hersteller: AG TERMOPASTY
Category: Lubricants
Description: Oil; colourless; vaseline; liquid; plastic container; 1000ml
Type of chemical agent: oil
Colour: colourless
Appearance: liquid
Kind of package: plastic container
Agent application: metals; plastics; rubber
Application: lubrication; protection against corrosion
Kind of agent: vaseline
Capacity: 1l

Hersteller: AG TERMOPASTY
Category: Lubricants
Description: Oil; colourless; silicone; liquid; plastic container; 1000ml
Kind of package: plastic container
Type of chemical agent: oil
Application: isolation; lubrication; sealed
Agent application: bearings; plastics
Kind of agent: silicone
Appearance: liquid
Name: OLEJ SILIKONOWY
Colour: colourless
Capacity: 1l

Hersteller: AG TERMOPASTY
Category: Cleaning & maintaining products
Description: Cleaning agent; 1l; liquid; plastic container
Type of chemical agent: cleaning agent
Capacity: 1l
Appearance: liquid
Kind of package: plastic container
Application: degreasing; dust removing; impurities removing; nicotine stains removing
Agent application: plastics
Signal word: Warning
Hazard statements: H226: Flammable liquid and vapour.
Precautionary statements: P102: Keep out of reach of children.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.
GHS Code: GHS02

Hersteller: AG TERMOPASTY
Category: Cleaning & maintaining products
Description: Isopropyl alcohol; KONTAKT IPA Plus; 500ml; liquid; colourless
Type of chemical agent: isopropyl alcohol
Colour: colourless
Application: cleaning
Density: 0.79g/cm³ @ 20°C
Capacity: 0.5l
Kind of package: plastic container
Agent application: electronic equipment; metals; optical equipment; PCBs
Appearance: liquid
Name: KONTAKT IPA Plus
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P233: Keep container tightly closed.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P312: Call a POISON CENTER or doctor/physician if you feel unwell.; P370 + P378: In case of fire: Use ...for extinction.
Hazard statements: H225: Highly flammable liquid and vapour.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness
Signal word: Danger
GHS Code: GHS02; GHS07

Hersteller: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; copper; silicone + gold; AG Gold; 2.8W/mK
Type of chemical agent: heat transfer paste
Colour: copper
Application: facilitates heat transfer
Operating temperature: -30...300°C
Thermal conductivity: 2.8W/mK
Appearance: paste
Net weight: 3g
Name: AG Gold
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Signal word: Warning
GHS Code: GHS09
Kind of package: syringe
Agent application: heatsinks
Grease ingredients: silicone + gold

Hersteller: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; grey; stainless steel particles,silicone
Type of chemical agent: heat transfer paste
Colour: grey
Application: facilitates heat transfer
Operating temperature: -40...300°C
Thermal conductivity: 6W/mK
Appearance: paste
Net weight: 3g
Name: AG EXTREME
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Signal word: Warning
GHS Code: GHS09
Kind of package: syringe
Agent application: heatsinks
Grease ingredients: silicone; stainless steel particles

Hersteller: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; halide-free,Lead Free,No Clean; liquid; 100ml
Density: 794mg/cm³ @ 25°C
Capacity: 0.1l
Kind of package: bottle
Soldering equipment features: can be washed down with alcohol based agents
Type of flux: rosin based
Kind of flux: halide-free; Lead Free; No Clean
Appearance: liquid
Solids content: 0...5%
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P235: Keep cool.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P331: Do NOT induce vomiting.; P501: Dispose of contents/container to ...
Hazard statements: H225: Highly flammable liquid and vapour.; H304: May be fatal if swallowed and enters airways.; H317: May cause an allergic skin reaction.; H336: May cause drowsiness or dizziness
Signal word: Danger
GHS Code: GHS02; GHS07; GHS08
Flux residues: non-corrosive

Hersteller: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; silicon based; PASTA HP; 1.5W/mK; 1kg
Type of chemical agent: heat transfer paste
Application: facilitates heat transfer
Operating temperature: -50...250°C
Agent features: silicon based
Net weight: 1kg
Kind of package: plastic container
Agent application: heatsinks
Appearance: paste
Name: PASTA HP
Precautionary statements: P273: Avoid release to the environment.; P391: Collect spillage.; P501: Dispose of contents/container to ...
Hazard statements: H411: Toxic to aquatic life with long lasting effects
Signal word: Warning
GHS Code: GHS09
Resistance to: temperature
Dielectric constant: 5
Thermal conductivity: 1.5W/mK

Hersteller: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; silicon based; PASTA HPX; 2.8W/mK; 1kg
Type of chemical agent: heat transfer paste
Application: facilitates heat transfer
Operating temperature: -50...250°C
Agent features: silicon based
Net weight: 1kg
Kind of package: plastic container
Agent application: heatsinks
Appearance: paste
Name: PASTA HPX
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Signal word: Warning
GHS Code: GHS09
Resistance to: temperature
Dielectric constant: 5.1
Thermal conductivity: 2.8W/mK

Hersteller: AG TERMOPASTY
Category: Protection & screen coatings
Description: Varnish; transparent; spray; 400ml; LAKIER PVB; Temp: -50÷150°C
Type of chemical agent: varnish
Capacity: 0.4l
Appearance: spray
Kind of package: can
Available labels languages: BG; CZ; DE; EN; FI; HU; PL; RO; RU; SK
Application: isolation; prevening from moisture; prevents short circuits and corona discharge; prevents stray currents and short circuit; protection against corrosion
Agent application: electronic equipment; PCBs
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H318: Causes serious eye damage; H336: May cause drowsiness or dizziness
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02; GHS05; GHS07
Agent features: good adhesion to metal, plastic and wood; re-soldering may be effectuated through the coating layer
Flash point: 380°C
Name: LAKIER PVB
Operating temperature: -50...150°C
Colour: transparent