Produkte > AG TERMOPASTY > Alle Produkte des Herstellers AG TERMOPASTY (589) > Seite 5 nach 10
| Foto | Bezeichnung | Hersteller | Beschreibung | Verfügbarkeit | Privatkunde | ||||
|---|---|---|---|---|---|---|---|---|---|
| ART.AGT-254 | AG TERMOPASTY |
Category: Cleaning & maintaining productsDescription: Cleaning agent; KONTAKT PR; 400ml; spray; can; Signal word: Danger Name: KONTAKT PR Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P251: Pressurized container: Do not pierce or burn, even after use.; P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician; P331: Do NOT induce vomiting.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F. Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness Type of agent: cleaning agent Capacity: 0.4l Kind of package: can Agent application: potentiometers Appearance: spray GHS Code: GHS02; GHS07 Application: cleaning; lubrication; regeneration Signal word: Danger |
auf Bestellung 3 Stücke: Lieferzeit 14-21 Tag (e) |
Im Einkaufswagen Stück im Wert von UAH | |||||
|
ART.AGT-256 | AG TERMOPASTY |
Category: Cleaning & maintaining productsDescription: Cleaning cloth: cleaning set; SMARTGEL; 0.25l Type of cleaning cloth: cleaning set Name: SMARTGEL Capacity: 0.25l Kit contents: cleaning fluid; microfiber cloth Application: dust removing; impurities removing Agent application: computer equipment; LCD/TFT displays; office equipment |
auf Bestellung 9 Stücke: Lieferzeit 14-21 Tag (e) |
Im Einkaufswagen Stück im Wert von UAH | ||||
| ART.AGT-257 | AG TERMOPASTY |
Category: Wipes & cleaning clothes Description: Cleaning cloth: cloth; microfiber; 5pcs; 300x300mm; cleaning; dry Quantity in set/package: 5pcs. Material: microfiber Version: dry Cloth dimensions: 300x300mm Agent application: computer equipment; office equipment Type of cleaning cloth: cloth Application: cleaning |
auf Bestellung 7 Stücke: Lieferzeit 14-21 Tag (e) |
Im Einkaufswagen Stück im Wert von UAH | |||||
|
ART.AGT-262 | AG TERMOPASTY |
Category: Encapsulating materialsDescription: Silicone; paste,encapsulating compound; white; Temp: -50÷200°C Curing method: RTV Application: sealing and encapsulation of electronic circuits Shore hardness: 59 Signal word: Danger Dielectric strength: 20kV/mm Precautionary statements: P202: Do not handle until all safety precautions have been read and understood.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P308 + P313: IF exposed or concerned: Get medical advice/attention. Hazard statements: H226: Flammable liquid and vapour.; H319: Causes serious eye irritation; H332: Harmful if inhaled; H335: May cause respiratory irritation.; H360D: May damage the unborn child.; H372: Causes damage to organs Colour: white Mix ratio: 100:10 Operating temperature: -50...200°C Surface resistance: <2410TΩ Type of agent: silicone Agent features: condensation cure; two-component Density: 1.2g/cm3 @ 25°C Dielectric constant: 3 Available labels languages: BG; CZ; EN; ES; FI; FR; HU; IT; PL; RO; SK Net weight: 1kg Thermal conductivity: 1.2W/mK Bonding time: 30min Appearance: encapsulating compound; paste GHS Code: GHS02; GHS07; GHS08 |
auf Bestellung 10 Stücke: Lieferzeit 14-21 Tag (e) |
Im Einkaufswagen Stück im Wert von UAH | ||||
|
ART.AGT-264 | AG TERMOPASTY |
Category: Encapsulating materialsDescription: Silicone; encapsulating compound; transparent; Temp: -50÷180°C Application: sealing and encapsulation of electronic circuits Resistance to: UV rays Colour: transparent Mix ratio: 3:2 Operating temperature: -50...180°C Type of agent: silicone Agent features: additive linking; two-component Density: 980mg/cm3 @ 25°C Net weight: 1kg Bonding time: 70min Appearance: encapsulating compound |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||
|
ART.AGT-266 | AG TERMOPASTY |
Category: Soldering Chemicals OthersDescription: Gas: butane; 200ml; can; for gas soldering iron Kind of package: can Signal word: Danger Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated. Precautionary statements: P102: Keep out of reach of children.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F. GHS Code: GHS02 Agent features: universal filling valve Capacity: 0.2l Type of gas: butane Applications of soldering equipment: for gas soldering iron |
auf Bestellung 191 Stücke: Lieferzeit 14-21 Tag (e) |
Im Einkaufswagen Stück im Wert von UAH | ||||
| ART.AGT-267 | AG TERMOPASTY |
Category: Cleaning & maintaining productsDescription: Isopropyl alcohol; KONTAKT IPA Plus; 250ml; liquid; colourless Type of agent: isopropyl alcohol Name: KONTAKT IPA Plus Capacity: 0.25l Appearance: liquid Kind of package: bottle with atomizer Colour: colourless Density: 0.79g/cm3 @ 20°C Application: cleaning Agent application: electronic equipment; metals; optical equipment; PCBs Signal word: Danger Hazard statements: H225: Highly flammable liquid and vapour.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P233: Keep container tightly closed.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P312: Call a POISON CENTER or doctor/physician if you feel unwell.; P370 + P378: In case of fire: Use ...for extinction. GHS Code: GHS02; GHS07 |
auf Bestellung 67 Stücke: Lieferzeit 14-21 Tag (e) |
Im Einkaufswagen Stück im Wert von UAH | |||||
| ART.AGT-270 | AG TERMOPASTY |
Category: Wipes & cleaning clothesDescription: Cleaning cloth: cleaning sticks; 20pcs; L: 122mm; dust free Version: single sided Length: 122mm Tip material: polyurethane Agent features: does not scratch surfaces; dust free Width of cleaning swab: 15.5mm Type of cleaning cloth: cleaning sticks Handle material: polypropylene Application: keybord cleaning swabs; precise cleaning operations Length of cleaning swab: 25mm Quantity in set/package: 20pcs. |
auf Bestellung 5 Stücke: Lieferzeit 14-21 Tag (e) |
Im Einkaufswagen Stück im Wert von UAH | |||||
|
ART.AGT-272 | AG TERMOPASTY |
Category: Soldering Chemicals OthersDescription: Agent: soldering acid; for difficult to tin nickel surfaces Type of agent: soldering acid GHS Code: GHS05; GHS07 Application: for difficult to tin nickel surfaces Capacity: 0.5l Name: KWAS LUTOWNICZY Signal word: Danger Hazard statements: H302: Harmful if swallowed.; H314: Causes severe skin burns and eye damage. Precautionary statements: P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P405: Store locked up. |
auf Bestellung 7 Stücke: Lieferzeit 14-21 Tag (e) |
Im Einkaufswagen Stück im Wert von UAH | ||||
|
ART.AGT-293 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.3mm; 1.5W/mK; glueless Type of tape: heat transfer Width: 20mm Length: 0.13m Thickness: 0.3mm Thermal conductivity: 1.5W/mK Tape application: facilitates heat transfer; heatsink mounting Version: glueless |
auf Bestellung 7 Stücke: Lieferzeit 14-21 Tag (e) |
Im Einkaufswagen Stück im Wert von UAH | ||||
|
ART.AGT-294 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.3mm; 1.5W/mK; glueless Type of tape: heat transfer Width: 30mm Length: 30mm Thickness: 0.3mm Thermal conductivity: 1.5W/mK Tape application: facilitates heat transfer; heatsink mounting Version: glueless |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||
|
ART.AGT-296 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.3mm; 2.4W/mK; glueless Tape application: facilitates heat transfer; heatsink mounting Type of tape: heat transfer Version: glueless Length: 0.13m Thickness: 0.3mm Width: 20mm Thermal conductivity: 2.4W/mK |
auf Bestellung 12 Stücke: Lieferzeit 14-21 Tag (e) |
Im Einkaufswagen Stück im Wert von UAH | ||||
|
ART.AGT-297 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.3mm; 2.4W/mK; glueless Version: glueless Type of tape: heat transfer Length: 30mm Thickness: 0.3mm Width: 30mm Thermal conductivity: 2.4W/mK Tape application: facilitates heat transfer; heatsink mounting |
auf Bestellung 11 Stücke: Lieferzeit 14-21 Tag (e) |
Im Einkaufswagen Stück im Wert von UAH | ||||
|
ART.AGT-298 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 200mm; L: 400mm; Thk: 0.5mm; 1.5W/mK Length: 0.4m Type of tape: heat transfer Version: glueless Thickness: 0.5mm Width: 200mm Thermal conductivity: 1.5W/mK Tape application: facilitates heat transfer; heatsink mounting |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||
|
ART.AGT-299 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.5mm; 1.5W/mK; glueless Type of tape: heat transfer Width: 20mm Length: 0.13m Thickness: 0.5mm Thermal conductivity: 1.5W/mK Tape application: facilitates heat transfer; heatsink mounting Version: glueless |
auf Bestellung 1 Stücke: Lieferzeit 14-21 Tag (e) |
Im Einkaufswagen Stück im Wert von UAH | ||||
|
ART.AGT-300 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.5mm; 1.5W/mK; glueless Type of tape: heat transfer Version: glueless Length: 30mm Thickness: 0.5mm Width: 30mm Thermal conductivity: 1.5W/mK Tape application: facilitates heat transfer; heatsink mounting |
auf Bestellung 48 Stücke: Lieferzeit 14-21 Tag (e) |
Im Einkaufswagen Stück im Wert von UAH | ||||
|
ART.AGT-301 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 200mm; L: 400mm; Thk: 0.5mm; 2.4W/mK Length: 0.4m Type of tape: heat transfer Version: glueless Thickness: 0.5mm Width: 200mm Thermal conductivity: 2.4W/mK Tape application: facilitates heat transfer; heatsink mounting |
auf Bestellung 3 Stücke: Lieferzeit 14-21 Tag (e) |
Im Einkaufswagen Stück im Wert von UAH | ||||
|
ART.AGT-302 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.5mm; 2.4W/mK; glueless Type of tape: heat transfer Width: 20mm Length: 0.13m Thickness: 0.5mm Thermal conductivity: 2.4W/mK Tape application: facilitates heat transfer; heatsink mounting Version: glueless |
auf Bestellung 21 Stücke: Lieferzeit 14-21 Tag (e) |
Im Einkaufswagen Stück im Wert von UAH | ||||
|
ART.AGT-303 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.5mm; 2.4W/mK Version: double-sided; glueless Type of tape: heat transfer Length: 30mm Thickness: 0.5mm Width: 30mm Thermal conductivity: 2.4W/mK Tape application: facilitates heat transfer; heatsink mounting |
auf Bestellung 100 Stücke: Lieferzeit 14-21 Tag (e) |
Im Einkaufswagen Stück im Wert von UAH | ||||
|
ART.AGT-305 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.5mm; 6W/mK; glueless Type of tape: heat transfer Width: 20mm Length: 0.13m Thickness: 0.5mm Thermal conductivity: 6W/mK Tape application: facilitates heat transfer; heatsink mounting Version: glueless |
auf Bestellung 143 Stücke: Lieferzeit 14-21 Tag (e) |
Im Einkaufswagen Stück im Wert von UAH | ||||
|
ART.AGT-306 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.5mm; 6W/mK; glueless Type of tape: heat transfer Version: glueless Length: 30mm Thickness: 0.5mm Width: 30mm Thermal conductivity: 6W/mK Tape application: facilitates heat transfer; heatsink mounting |
auf Bestellung 32 Stücke: Lieferzeit 14-21 Tag (e) |
Im Einkaufswagen Stück im Wert von UAH | ||||
|
ART.AGT-307 | AG TERMOPASTY |
Category: Thermoconductive tapes Description: Tape: heat transfer; W: 200mm; L: 400mm; Thk: 0.5mm; 6W/mK; glueless Length: 0.4m Type of tape: heat transfer Version: glueless Thickness: 0.5mm Width: 200mm Thermal conductivity: 6W/mK Tape application: facilitates heat transfer; heatsink mounting |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||
|
ART.AGT-308 | AG TERMOPASTY |
Category: LubricantsDescription: Oil; colourless; liquid; plastic container; SHREDDERS OIL; 250ml Type of agent: oil Colour: colourless Appearance: liquid Kind of package: plastic container Name: SHREDDERS OIL Capacity: 0.25l Agent application: shredders Application: lubrication; mechanical parts |
auf Bestellung 13 Stücke: Lieferzeit 14-21 Tag (e) |
Im Einkaufswagen Stück im Wert von UAH | ||||
|
ART.AGT-309 | AG TERMOPASTY |
Category: Heat conductive compoundsDescription: Heat transfer paste; white; silicon based,do not conduct; 800g Type of agent: heat transfer paste Colour: white Agent features: do not conduct; silicon based Appearance: paste Name: PASTA SILIKONOWA H2 Operating temperature: -50...250°C Thermal conductivity: 0.88W/mK Kind of package: cartridge Agent application: electronic equipment; heatsinks; Household equipment Application: facilitates heat transfer Dielectric constant: 4.7 Signal word: Warning Hazard statements: H410: Very toxic to aquatic life with long lasting effects. Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ... Net weight: 0.8kg GHS Code: GHS09 Flash point: 350°C Density: 2.7g/cm3 @ 20°C |
auf Bestellung 8 Stücke: Lieferzeit 14-21 Tag (e) |
Im Einkaufswagen Stück im Wert von UAH | ||||
|
ART.AGT-311 | AG TERMOPASTY |
Category: Heat conductive compoundsDescription: Heat transfer paste; white; silicon based,do not conduct; 400g Type of agent: heat transfer paste Colour: white Agent features: do not conduct; silicon based Appearance: paste Name: PASTA SILIKONOWA H3 Operating temperature: -50...250°C Thermal conductivity: 0.88W/mK Kind of package: cartridge Agent application: heatsinks Application: facilitates heat transfer Dielectric constant: 4.7 Signal word: Warning Hazard statements: H410: Very toxic to aquatic life with long lasting effects. Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ... Net weight: 400g GHS Code: GHS09 Flash point: 350°C Density: 1.37g/cm3 @ 20°C |
auf Bestellung 11 Stücke: Lieferzeit 14-21 Tag (e) |
Im Einkaufswagen Stück im Wert von UAH | ||||
|
ART.AGT-314 | AG TERMOPASTY |
Category: Encapsulating materialsDescription: Silicone; liquid,encapsulating compound; white; -50÷180°C; <22TΩ Operating temperature: -50...180°C Mix ratio: 1:1 Surface resistance: <22TΩ Type of agent: silicone Agent features: condensation cure; two-component Density: 1.2g/cm3 Net weight: 1kg Thermal conductivity: 1.5W/mK Bonding time: 70min Appearance: encapsulating compound; liquid Application: sealing and encapsulation of electronic circuits Shore hardness: 20 Dielectric strength: 14.4kV/mm Colour: white |
auf Bestellung 1 Stücke: Lieferzeit 14-21 Tag (e) |
Im Einkaufswagen Stück im Wert von UAH | ||||
|
ART.AGT-315 | AG TERMOPASTY |
Category: Encapsulating materialsDescription: Silicone; liquid,encapsulating compound; transparent; 50÷180°C Type of agent: silicone Appearance: encapsulating compound; liquid Colour: transparent Application: sealing and encapsulation of electronic circuits Shore hardness: 12 Operating temperature: 50...180°C Density: 980mg/cm3 Dielectric strength: 11kV/mm Mix ratio: 3:2 Bonding time: 60min Surface resistance: <480TΩ Agent features: condensation cure; two-component Net weight: 0.1kg |
auf Bestellung 17 Stücke: Lieferzeit 14-21 Tag (e) |
Im Einkaufswagen Stück im Wert von UAH | ||||
|
ART.AGT-316 | AG TERMOPASTY |
Category: Encapsulating materialsDescription: Silicone; liquid,encapsulating compound; transparent; 50÷180°C Appearance: encapsulating compound; liquid Colour: transparent Operating temperature: 50...180°C Net weight: 1kg Surface resistance: <480TΩ Type of agent: silicone Agent features: condensation cure; two-component Density: 980mg/cm3 Bonding time: 60min Application: sealing and encapsulation of electronic circuits Shore hardness: 12 Dielectric strength: 11kV/mm Mix ratio: 3:2 |
auf Bestellung 8 Stücke: Lieferzeit 14-21 Tag (e) |
Im Einkaufswagen Stück im Wert von UAH | ||||
|
ART.AGT-317 | AG TERMOPASTY |
Category: Encapsulating materialsDescription: Silicone; liquid,encapsulating compound; white; -50÷180°C; <22TΩ Type of agent: silicone Appearance: encapsulating compound; liquid Colour: white Application: sealing and encapsulation of electronic circuits Shore hardness: 20 Operating temperature: -50...180°C Thermal conductivity: 1.5W/mK Density: 1.2g/cm3 Dielectric strength: 14.4kV/mm Mix ratio: 1:1 Bonding time: 70min Surface resistance: <22TΩ Agent features: condensation cure; two-component Net weight: 0.1kg |
auf Bestellung 17 Stücke: Lieferzeit 14-21 Tag (e) |
Im Einkaufswagen Stück im Wert von UAH | ||||
|
ART.AGT-318 | AG TERMOPASTY |
Category: Heat conductive compoundsDescription: Heat transfer paste; white; silicon based,do not conduct; 5kg Type of agent: heat transfer paste Colour: white Agent features: do not conduct; silicon based Appearance: paste Name: PASTA SILIKONOWA H2 Operating temperature: -50...250°C Thermal conductivity: 0.88W/mK Kind of package: bucket Agent application: electronic equipment; heatsinks; Household equipment Application: facilitates heat transfer Dielectric constant: 4.7 Signal word: Warning Hazard statements: H410: Very toxic to aquatic life with long lasting effects. Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ... Net weight: 5kg GHS Code: GHS09 Flash point: 350°C Density: 2.7g/cm3 @ 20°C |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||
|
ART.AGT-323 | AG TERMOPASTY |
Category: FluxesDescription: Flux: rosin-free; Water Soluble; liquid; bottle; 0.05l; Flux: SW13 Applications of soldering equipment: nichrome alloy soldering; steel soldering (also acid-proof steel) Soldering equipment features: corrosive Kind of flux: Water Soluble Signal word: Danger Flux residues: corrosive; yes Hazard statements: H302: Harmful if swallowed.; H314: Causes severe skin burns and eye damage.; H317: May cause an allergic skin reaction.; H335: May cause respiratory irritation.; H412: Harmful to aquatic life with long lasting effects. GHS Code: GHS05; GHS07 Type of flux: rosin-free Capacity: 50ml Density: 1.27g/cm3 @ 20°C Kind of package: bottle Solids content: 10% Appearance: liquid Conform to the norm: PN EN 29454 Manufacturer series: TS-81 Standard equipment: fine brush Precautionary statements: P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician. Related items: ZD-171 Flux name: SW13 |
auf Bestellung 1 Stücke: Lieferzeit 14-21 Tag (e) |
Im Einkaufswagen Stück im Wert von UAH | ||||
|
ART.AGT-324 | AG TERMOPASTY |
Category: Heat conductive compoundsDescription: Heat transfer paste; grey; CARBON; 15.2W/mK; 1g Type of agent: heat transfer paste Colour: grey Appearance: paste Name: CARBON Operating temperature: -20...130°C Thermal conductivity: 15.2W/mK Kind of package: syringe Agent application: heatsinks Application: facilitates heat transfer Hazard statements: H411: Toxic to aquatic life with long lasting effects Precautionary statements: P273: Avoid release to the environment.; P391: Collect spillage.; P501: Dispose of contents/container to ... Net weight: 1g GHS Code: GHS09 |
auf Bestellung 54 Stücke: Lieferzeit 14-21 Tag (e) |
Im Einkaufswagen Stück im Wert von UAH | ||||
|
ART.AGT-325 | AG TERMOPASTY |
Category: Heat conductive compoundsDescription: Heat transfer paste; grey; CARBON; 15.2W/mK; 3g Type of agent: heat transfer paste Colour: grey Appearance: paste Name: CARBON Operating temperature: -20...130°C Thermal conductivity: 15.2W/mK Kind of package: syringe Agent application: heatsinks Application: facilitates heat transfer Hazard statements: H411: Toxic to aquatic life with long lasting effects Precautionary statements: P273: Avoid release to the environment.; P391: Collect spillage.; P501: Dispose of contents/container to ... Net weight: 3g GHS Code: GHS09 |
auf Bestellung 34 Stücke: Lieferzeit 14-21 Tag (e) |
Im Einkaufswagen Stück im Wert von UAH | ||||
|
ART.AGT-326 | AG TERMOPASTY |
Category: Materials for PCB productionDescription: Agent: developer; blister,plastic container; Signal word: Danger Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P262: Do not get in eyes, on skin, or on clothing.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P406: Store in corrosive resistant/... container with a resistant inner liner.; P501: Dispose of contents/container to ... Hazard statements: H290: May be corrosive to metals.; H314: Causes severe skin burns and eye damage.; H335: May cause respiratory irritation. Type of agent: developer Net weight: 110g Kind of package: blister; plastic container Agent application: for photoresists; PCBs GHS Code: GHS05; GHS07 Signal word: Danger |
auf Bestellung 49 Stücke: Lieferzeit 14-21 Tag (e) |
Im Einkaufswagen Stück im Wert von UAH | ||||
|
ART.AGT-327 | AG TERMOPASTY |
Category: Heat conductive compoundsDescription: Heat transfer paste; silicon based; PASTA HP; 1.5W/mK; 500g Type of agent: heat transfer paste Agent features: silicon based Appearance: paste Name: PASTA HP Operating temperature: -50...250°C Thermal conductivity: 1.5W/mK Kind of package: cartridge Agent application: heatsinks Application: facilitates heat transfer Dielectric constant: 5 Signal word: Warning Hazard statements: H411: Toxic to aquatic life with long lasting effects Precautionary statements: P273: Avoid release to the environment.; P391: Collect spillage.; P501: Dispose of contents/container to ... Net weight: 0.5kg GHS Code: GHS09 Resistance to: temperature |
auf Bestellung 5 Stücke: Lieferzeit 14-21 Tag (e) |
Im Einkaufswagen Stück im Wert von UAH | ||||
|
ART.AGT-328 | AG TERMOPASTY |
Category: Heat conductive compoundsDescription: Heat transfer paste; silicon based; PASTA HPX; 2.8W/mK; 500g Type of agent: heat transfer paste Agent features: silicon based Appearance: paste Name: PASTA HPX Operating temperature: -50...250°C Thermal conductivity: 2.8W/mK Kind of package: cartridge Agent application: heatsinks Application: facilitates heat transfer Dielectric constant: 5.1 Signal word: Warning Hazard statements: H410: Very toxic to aquatic life with long lasting effects. Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ... Net weight: 0.5kg GHS Code: GHS09 Resistance to: temperature |
auf Bestellung 5 Stücke: Lieferzeit 14-21 Tag (e) |
Im Einkaufswagen Stück im Wert von UAH | ||||
|
ART.AGT-334 | AG TERMOPASTY |
Category: FluxesDescription: Flux: rosin based; halide-free,RMA,ROL0; paste; can; amber; 80g Type of flux: rosin based Kind of flux: halide-free; RMA; ROL0 Appearance: paste Kind of package: can Applications of soldering equipment: soldering of galvanised and nickel plated elements Soldering equipment features: can be washed down with alcohol based agents Colour: amber Operating temperature: 50...200°C Signal word: Danger Hazard statements: H317: May cause an allergic skin reaction.; H318: Causes serious eye damage Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse. GHS Code: GHS05; GHS07 Flux residues: non-corrosive; yes Net weight: 80g |
Produkt ist nicht verfügbar |
Im Einkaufswagen Stück im Wert von UAH | ||||
|
|
B327-1kg ART.AGT-122 | AG TERMOPASTY |
ART.AGT-122 AG Termopasty Sodium persulfate for etching copper and PCB circuits etching, Fine-Crystaline; 1kg; Bottle; CH B327.k01 |
auf Bestellung 4 Stücke: Lieferzeit 7-14 Tag (e) |
|
||||
| B327-250g ART.AGT-090 | AG TERMOPASTY | CH B327.250 Sodium persulfate for etching copper and PCB circuits etching, Fine-Crystaline; 250g; Bag; CH B327.250 |
auf Bestellung 10 Stücke: Lieferzeit 7-14 Tag (e) |
|
|||||
| B327-250g ART.AGT-090 | AG TERMOPASTY | CH B327.250 Sodium persulfate for etching copper and PCB circuits etching, Fine-Crystaline; 250g; Bag; CH B327.250 |
auf Bestellung 60 Stücke: Lieferzeit 7-14 Tag (e) |
|
|||||
| B327-500g ART.AGT-091 | AG TERMOPASTY | CH B327.500 Sodium persulfate for etching copper and PCB circuits etching, Fine-Crystaline; 500g; Bag; CH B327.500 |
auf Bestellung 20 Stücke: Lieferzeit 7-14 Tag (e) |
|
|||||
| B327-500g ART.AGT-091 | AG TERMOPASTY | CH B327.500 Sodium persulfate for etching copper and PCB circuits etching, Fine-Crystaline; 500g; Bag; CH B327.500 |
auf Bestellung 2 Stücke: Lieferzeit 7-14 Tag (e) |
|
|||||
|
Borax (Natriumtetraborat-Decahydrat) (agt-121) 500 г Produktcode: 116167
1
zu Favoriten hinzufügen
Lieblingsprodukt
|
AG TermoPasty |
Lötgeräte, Lötmaterial > Lötflussmittel Kategorie: Flussmittel Beschreibung: Flussmittel zum Löten und Schweißen mit Messing- (Kupfer-Zink-)Loten. Löst Metalloxide auf und erleichtert die Verbindung des Lots mit dem Lötmaterial. Borax hat die Form eines feinkristallinen Pulvers ohne Fluoride. Gewicht/Volumen/Menge: 500 г |
auf Bestellung: 6 St.
|
|
||||
|
|
Butan do lutownic ART.AGT-266 | AG TERMOPASTY |
ART.AGT-266 AG Termopasty Butane gas for gas soldering irons; 200ml; Aerosol; Can; CH BUTANE.200 |
auf Bestellung 6 Stücke: Lieferzeit 7-14 Tag (e) |
|
||||
|
Kupferpaste 400ml Produktcode: 122872
zu Favoriten hinzufügen
Lieblingsprodukt
|
AG Termopasty |
Chemie > Sonstige ChemieBeschreibung: Kupferpaste. Mehrzweckprodukt für den Einsatz unter schwierigsten Bedingungen und in einem weiten Temperaturbereich von -40°C bis 1100°C. Sorgt für hervorragende Schmierung, Schutz vor Abrieb, Korrosion und hohen Temperaturen. Anwendung: Schmierung von Schrauben und Muttern, Rohrverbindungen usw. Verpackung: 400 ml |
verfügbar: 18 St.
|
|
|||||
|
|
Easy Print Sn62Pb36Ag2 6g ART.AGT-023 | AG TERMOPASTY |
CH PaLEP-008ag Solder paste for SMD komponents in the process does not include washing phase doesn't contain chlorides,flux residue doesn't corrode,doesn't require washing CH PaLEP-008ag |
auf Bestellung 12 Stücke: Lieferzeit 7-14 Tag (e) |
|
||||
| Easy Print Sn96,5Ag3Cu0.5 6g ART.AGT-028 | AG TERMOPASTY | CH PaLEP-008cu Solder paste for SMD komponents in the process does not include washing phase contains a rosin-based flux, very good mechanical properties and electrical CH PaLEP-008cu |
auf Bestellung 13 Stücke: Lieferzeit 7-14 Tag (e) |
|
|||||
|
ESAC305/20 Produktcode: 62034
zu Favoriten hinzufügen
Lieblingsprodukt
|
AG TermoPasty |
Lötgeräte, Lötmaterial > Lote, LötpastenKategorie: Lötpaste Beschreibung: Zum Weichlöten, Paste Gewicht/Volumen/Menge: 5 ml |
Produkt ist nicht verfügbar
|
|
||||
|
ESAC305/20 abgelaufen Produktcode: 104182
zu Favoriten hinzufügen
Lieblingsprodukt
|
AG TermoPasty |
Lötgeräte, Lötmaterial > Lote, Lötpasten Kategorie: Lötpaste Beschreibung: Zum Weichlöten, Paste Gewicht/Volumen/Menge: 5 ml |
Produkt ist nicht verfügbar
|
|
||||
|
ESAC305/8 Lötpaste 217°C 96,5Sn/3Ag/0,5Cu (ART.AGT-028) Produktcode: 35855
5
zu Favoriten hinzufügen
Lieblingsprodukt
|
AG TermoPasty |
Lötgeräte, Lötmaterial > Lote, Lötpasten Kategorie: Lötpaste Beschreibung: Lötpaste; Sn96.5Ag3Cu0.5; Paste; Spritze; 8g; 2.5ml; Flussmittel: No Clean; 15% Gewicht/Volumen/Menge: 8 g Legierungszusammensetzung: Sn96,5Ag3Cu0,5 Schmelzpunkt: 217°С Lottyp: Bleifrei |
erwartet: 30 St.
auf Bestellung: 11 St.
|
|
|||||
|
ESAC305/8 abgelaufen, Haltbarkeit abgelaufen Produktcode: 104194
zu Favoriten hinzufügen
Lieblingsprodukt
|
AG TermoPasty |
Lötgeräte, Lötmaterial > Lote, Lötpasten Kategorie: Lötpaste |
Produkt ist nicht verfügbar
|
|
||||
|
ESN62PB36AG/20 Produktcode: 62035
zu Favoriten hinzufügen
Lieblingsprodukt
|
AG TermoPasty |
Lötgeräte, Lötmaterial > Lote, LötpastenKategorie: Lötpaste Beschreibung: Zum Weichlöten, Paste Gewicht/Volumen/Menge: 5 ml |
Produkt ist nicht verfügbar
|
|
||||
|
ESN62PB36AG/20 abgelaufen Produktcode: 104185
zu Favoriten hinzufügen
Lieblingsprodukt
|
AG TermoPasty |
Lötgeräte, Lötmaterial > Lote, Lötpasten Kategorie: Lötpaste Beschreibung: Zum Weichlöten, Paste Gewicht/Volumen/Menge: 5 ml |
Produkt ist nicht verfügbar
|
|
||||
|
ESN62PB36AG/250 Produktcode: 73002
zu Favoriten hinzufügen
Lieblingsprodukt
|
AG TermoPasty |
Lötgeräte, Lötmaterial > Lote, Lötpasten Kategorie: Lötpaste Beschreibung: Zum Weichlöten, Paste |
Produkt ist nicht verfügbar
|
Im Einkaufswagen Stück im Wert von UAH | |||||
|
ESN62PB36AG/40 Produktcode: 73701
zu Favoriten hinzufügen
Lieblingsprodukt
|
AG TermoPasty |
Lötgeräte, Lötmaterial > Lote, Lötpasten Kategorie: Lötpaste Beschreibung: Zum Weichlöten, Paste |
Produkt ist nicht verfügbar
|
|
||||
|
ESN62PB36AG/40 abgelaufen Produktcode: 104188
zu Favoriten hinzufügen
Lieblingsprodukt
|
AG TermoPasty |
Lötgeräte, Lötmaterial > Lote, Lötpasten Kategorie: Lötpaste Beschreibung: Zum Weichlöten, Paste |
Produkt ist nicht verfügbar
|
|
|||||
|
ESN62PB36AG/8 Lötpaste 179 ° C 62Sn/36Pb/2Ag (ART.AGT-023) Produktcode: 35856
8
zu Favoriten hinzufügen
Lieblingsprodukt
|
AG TermoPasty |
Lötgeräte, Lötmaterial > Lote, Lötpasten Kategorie: Lötpaste Beschreibung: Lot; Sn62Pb36Ag2; Paste; Spritze; 8g; 2.5ml; Flussmittel: No Clean; 15% Gewicht/Volumen/Menge: 8 g Legierungszusammensetzung: Sn62Pb36Ag2 Schmelzpunkt: 179°С Lottyp: Bleihaltig |
auf Bestellung: 48 St.
|
|
|||||
|
ESN62PB36AG/8 abgelaufen, Haltbarkeit abgelaufen Produktcode: 104195
zu Favoriten hinzufügen
Lieblingsprodukt
|
AG TermoPasty |
Lötgeräte, Lötmaterial > Lote, Lötpasten Kategorie: Lot mit Silber Beschreibung: Lot; Sn62Pb36Ag2; Paste; Spritze; 8g; 2.5ml; Flussmittel: No Clean; 15% Gewicht/Volumen/Menge: 8 g Legierungszusammensetzung: Sn62Pb36Ag2 Lottyp: Bleihaltig |
Produkt ist nicht verfügbar
|
|
||||
|
Flux AG5 100 мл Produktcode: 122881
zu Favoriten hinzufügen
Lieblingsprodukt
|
AG Termopasty |
Lötgeräte, Lötmaterial > LötflussmittelKategorie: Flussmittel Beschreibung: Hochtemperatur-Verzinnen, Löten von mit Polyurethanlacken beschichteten Teilen, Löten von versilberten und verzinnten Teilen Gewicht/Volumen/Menge: 100 мл |
Produkt ist nicht verfügbar
|
|
||||
|
Flussmittel AG 5 Produktcode: 128512
4
zu Favoriten hinzufügen
Lieblingsprodukt
|
AG Termopasty |
Lötgeräte, Lötmaterial > Lötflussmittel Kategorie: Mittelaktives Flussmittel Beschreibung: Flüssiges, kolophoniumfreies, mittelaktives Flussmittel vom Typ 2.2.3 A gemäß ISO 9454-1, eine alkoholische Lösung organischer Verbindungen. Bestimmt für das Hochtemperatur-Verzinnen (300-400 °C) und Löten von Elementen mit Polyurethan-Lackbeschichtungen sowie zum Löten versilberter und verzinnter Elemente. Gewicht/Volumen/Menge: 100 мл Konsistenz: Flüssig |
verfügbar: 9 St.
auf Bestellung: 21 St.
|
|
| ART.AGT-254 |
![]() |
Hersteller: AG TERMOPASTY
Category: Cleaning & maintaining products
Description: Cleaning agent; KONTAKT PR; 400ml; spray; can; Signal word: Danger
Name: KONTAKT PR
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P251: Pressurized container: Do not pierce or burn, even after use.; P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician; P331: Do NOT induce vomiting.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness
Type of agent: cleaning agent
Capacity: 0.4l
Kind of package: can
Agent application: potentiometers
Appearance: spray
GHS Code: GHS02; GHS07
Application: cleaning; lubrication; regeneration
Signal word: Danger
Category: Cleaning & maintaining products
Description: Cleaning agent; KONTAKT PR; 400ml; spray; can; Signal word: Danger
Name: KONTAKT PR
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P251: Pressurized container: Do not pierce or burn, even after use.; P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P310: IF SWALLOWED: Immediately call a POISON CENTER or doctor/physician; P331: Do NOT induce vomiting.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness
Type of agent: cleaning agent
Capacity: 0.4l
Kind of package: can
Agent application: potentiometers
Appearance: spray
GHS Code: GHS02; GHS07
Application: cleaning; lubrication; regeneration
Signal word: Danger
auf Bestellung 3 Stücke:
Lieferzeit 14-21 Tag (e)
| ART.AGT-256 |
![]() |
Hersteller: AG TERMOPASTY
Category: Cleaning & maintaining products
Description: Cleaning cloth: cleaning set; SMARTGEL; 0.25l
Type of cleaning cloth: cleaning set
Name: SMARTGEL
Capacity: 0.25l
Kit contents: cleaning fluid; microfiber cloth
Application: dust removing; impurities removing
Agent application: computer equipment; LCD/TFT displays; office equipment
Category: Cleaning & maintaining products
Description: Cleaning cloth: cleaning set; SMARTGEL; 0.25l
Type of cleaning cloth: cleaning set
Name: SMARTGEL
Capacity: 0.25l
Kit contents: cleaning fluid; microfiber cloth
Application: dust removing; impurities removing
Agent application: computer equipment; LCD/TFT displays; office equipment
auf Bestellung 9 Stücke:
Lieferzeit 14-21 Tag (e)
| ART.AGT-257 |
Hersteller: AG TERMOPASTY
Category: Wipes & cleaning clothes
Description: Cleaning cloth: cloth; microfiber; 5pcs; 300x300mm; cleaning; dry
Quantity in set/package: 5pcs.
Material: microfiber
Version: dry
Cloth dimensions: 300x300mm
Agent application: computer equipment; office equipment
Type of cleaning cloth: cloth
Application: cleaning
Category: Wipes & cleaning clothes
Description: Cleaning cloth: cloth; microfiber; 5pcs; 300x300mm; cleaning; dry
Quantity in set/package: 5pcs.
Material: microfiber
Version: dry
Cloth dimensions: 300x300mm
Agent application: computer equipment; office equipment
Type of cleaning cloth: cloth
Application: cleaning
auf Bestellung 7 Stücke:
Lieferzeit 14-21 Tag (e)
| ART.AGT-262 |
![]() |
Hersteller: AG TERMOPASTY
Category: Encapsulating materials
Description: Silicone; paste,encapsulating compound; white; Temp: -50÷200°C
Curing method: RTV
Application: sealing and encapsulation of electronic circuits
Shore hardness: 59
Signal word: Danger
Dielectric strength: 20kV/mm
Precautionary statements: P202: Do not handle until all safety precautions have been read and understood.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P308 + P313: IF exposed or concerned: Get medical advice/attention.
Hazard statements: H226: Flammable liquid and vapour.; H319: Causes serious eye irritation; H332: Harmful if inhaled; H335: May cause respiratory irritation.; H360D: May damage the unborn child.; H372: Causes damage to organs
Colour: white
Mix ratio: 100:10
Operating temperature: -50...200°C
Surface resistance: <2410TΩ
Type of agent: silicone
Agent features: condensation cure; two-component
Density: 1.2g/cm3 @ 25°C
Dielectric constant: 3
Available labels languages: BG; CZ; EN; ES; FI; FR; HU; IT; PL; RO; SK
Net weight: 1kg
Thermal conductivity: 1.2W/mK
Bonding time: 30min
Appearance: encapsulating compound; paste
GHS Code: GHS02; GHS07; GHS08
Category: Encapsulating materials
Description: Silicone; paste,encapsulating compound; white; Temp: -50÷200°C
Curing method: RTV
Application: sealing and encapsulation of electronic circuits
Shore hardness: 59
Signal word: Danger
Dielectric strength: 20kV/mm
Precautionary statements: P202: Do not handle until all safety precautions have been read and understood.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.; P308 + P313: IF exposed or concerned: Get medical advice/attention.
Hazard statements: H226: Flammable liquid and vapour.; H319: Causes serious eye irritation; H332: Harmful if inhaled; H335: May cause respiratory irritation.; H360D: May damage the unborn child.; H372: Causes damage to organs
Colour: white
Mix ratio: 100:10
Operating temperature: -50...200°C
Surface resistance: <2410TΩ
Type of agent: silicone
Agent features: condensation cure; two-component
Density: 1.2g/cm3 @ 25°C
Dielectric constant: 3
Available labels languages: BG; CZ; EN; ES; FI; FR; HU; IT; PL; RO; SK
Net weight: 1kg
Thermal conductivity: 1.2W/mK
Bonding time: 30min
Appearance: encapsulating compound; paste
GHS Code: GHS02; GHS07; GHS08
auf Bestellung 10 Stücke:
Lieferzeit 14-21 Tag (e)
| ART.AGT-264 |
![]() |
Hersteller: AG TERMOPASTY
Category: Encapsulating materials
Description: Silicone; encapsulating compound; transparent; Temp: -50÷180°C
Application: sealing and encapsulation of electronic circuits
Resistance to: UV rays
Colour: transparent
Mix ratio: 3:2
Operating temperature: -50...180°C
Type of agent: silicone
Agent features: additive linking; two-component
Density: 980mg/cm3 @ 25°C
Net weight: 1kg
Bonding time: 70min
Appearance: encapsulating compound
Category: Encapsulating materials
Description: Silicone; encapsulating compound; transparent; Temp: -50÷180°C
Application: sealing and encapsulation of electronic circuits
Resistance to: UV rays
Colour: transparent
Mix ratio: 3:2
Operating temperature: -50...180°C
Type of agent: silicone
Agent features: additive linking; two-component
Density: 980mg/cm3 @ 25°C
Net weight: 1kg
Bonding time: 70min
Appearance: encapsulating compound
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| ART.AGT-266 |
![]() |
Hersteller: AG TERMOPASTY
Category: Soldering Chemicals Others
Description: Gas: butane; 200ml; can; for gas soldering iron
Kind of package: can
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.
Precautionary statements: P102: Keep out of reach of children.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02
Agent features: universal filling valve
Capacity: 0.2l
Type of gas: butane
Applications of soldering equipment: for gas soldering iron
Category: Soldering Chemicals Others
Description: Gas: butane; 200ml; can; for gas soldering iron
Kind of package: can
Signal word: Danger
Hazard statements: H222: Extremely flammable aerosol.; H229: Pressurised container: May burst if heated.
Precautionary statements: P102: Keep out of reach of children.; P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P211: Do not spray on an open flame or other ignition source.; P251: Pressurized container: Do not pierce or burn, even after use.; P410 + P412: Protect from sunlight. Do no expose to temperatures exceeding 50°C/122°F.
GHS Code: GHS02
Agent features: universal filling valve
Capacity: 0.2l
Type of gas: butane
Applications of soldering equipment: for gas soldering iron
auf Bestellung 191 Stücke:
Lieferzeit 14-21 Tag (e)
| ART.AGT-267 |
![]() |
Hersteller: AG TERMOPASTY
Category: Cleaning & maintaining products
Description: Isopropyl alcohol; KONTAKT IPA Plus; 250ml; liquid; colourless
Type of agent: isopropyl alcohol
Name: KONTAKT IPA Plus
Capacity: 0.25l
Appearance: liquid
Kind of package: bottle with atomizer
Colour: colourless
Density: 0.79g/cm3 @ 20°C
Application: cleaning
Agent application: electronic equipment; metals; optical equipment; PCBs
Signal word: Danger
Hazard statements: H225: Highly flammable liquid and vapour.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P233: Keep container tightly closed.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P312: Call a POISON CENTER or doctor/physician if you feel unwell.; P370 + P378: In case of fire: Use ...for extinction.
GHS Code: GHS02; GHS07
Category: Cleaning & maintaining products
Description: Isopropyl alcohol; KONTAKT IPA Plus; 250ml; liquid; colourless
Type of agent: isopropyl alcohol
Name: KONTAKT IPA Plus
Capacity: 0.25l
Appearance: liquid
Kind of package: bottle with atomizer
Colour: colourless
Density: 0.79g/cm3 @ 20°C
Application: cleaning
Agent application: electronic equipment; metals; optical equipment; PCBs
Signal word: Danger
Hazard statements: H225: Highly flammable liquid and vapour.; H319: Causes serious eye irritation; H336: May cause drowsiness or dizziness
Precautionary statements: P210: Keep away from heat/sparks/open flames/hot surfaces. – No smoking.; P233: Keep container tightly closed.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P312: Call a POISON CENTER or doctor/physician if you feel unwell.; P370 + P378: In case of fire: Use ...for extinction.
GHS Code: GHS02; GHS07
auf Bestellung 67 Stücke:
Lieferzeit 14-21 Tag (e)
| ART.AGT-270 |
![]() |
Hersteller: AG TERMOPASTY
Category: Wipes & cleaning clothes
Description: Cleaning cloth: cleaning sticks; 20pcs; L: 122mm; dust free
Version: single sided
Length: 122mm
Tip material: polyurethane
Agent features: does not scratch surfaces; dust free
Width of cleaning swab: 15.5mm
Type of cleaning cloth: cleaning sticks
Handle material: polypropylene
Application: keybord cleaning swabs; precise cleaning operations
Length of cleaning swab: 25mm
Quantity in set/package: 20pcs.
Category: Wipes & cleaning clothes
Description: Cleaning cloth: cleaning sticks; 20pcs; L: 122mm; dust free
Version: single sided
Length: 122mm
Tip material: polyurethane
Agent features: does not scratch surfaces; dust free
Width of cleaning swab: 15.5mm
Type of cleaning cloth: cleaning sticks
Handle material: polypropylene
Application: keybord cleaning swabs; precise cleaning operations
Length of cleaning swab: 25mm
Quantity in set/package: 20pcs.
auf Bestellung 5 Stücke:
Lieferzeit 14-21 Tag (e)
| ART.AGT-272 |
![]() |
Hersteller: AG TERMOPASTY
Category: Soldering Chemicals Others
Description: Agent: soldering acid; for difficult to tin nickel surfaces
Type of agent: soldering acid
GHS Code: GHS05; GHS07
Application: for difficult to tin nickel surfaces
Capacity: 0.5l
Name: KWAS LUTOWNICZY
Signal word: Danger
Hazard statements: H302: Harmful if swallowed.; H314: Causes severe skin burns and eye damage.
Precautionary statements: P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P405: Store locked up.
Category: Soldering Chemicals Others
Description: Agent: soldering acid; for difficult to tin nickel surfaces
Type of agent: soldering acid
GHS Code: GHS05; GHS07
Application: for difficult to tin nickel surfaces
Capacity: 0.5l
Name: KWAS LUTOWNICZY
Signal word: Danger
Hazard statements: H302: Harmful if swallowed.; H314: Causes severe skin burns and eye damage.
Precautionary statements: P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P405: Store locked up.
auf Bestellung 7 Stücke:
Lieferzeit 14-21 Tag (e)
| ART.AGT-293 |
Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.3mm; 1.5W/mK; glueless
Type of tape: heat transfer
Width: 20mm
Length: 0.13m
Thickness: 0.3mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.3mm; 1.5W/mK; glueless
Type of tape: heat transfer
Width: 20mm
Length: 0.13m
Thickness: 0.3mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
auf Bestellung 7 Stücke:
Lieferzeit 14-21 Tag (e)
| ART.AGT-294 |
Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.3mm; 1.5W/mK; glueless
Type of tape: heat transfer
Width: 30mm
Length: 30mm
Thickness: 0.3mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.3mm; 1.5W/mK; glueless
Type of tape: heat transfer
Width: 30mm
Length: 30mm
Thickness: 0.3mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| ART.AGT-296 |
Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.3mm; 2.4W/mK; glueless
Tape application: facilitates heat transfer; heatsink mounting
Type of tape: heat transfer
Version: glueless
Length: 0.13m
Thickness: 0.3mm
Width: 20mm
Thermal conductivity: 2.4W/mK
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.3mm; 2.4W/mK; glueless
Tape application: facilitates heat transfer; heatsink mounting
Type of tape: heat transfer
Version: glueless
Length: 0.13m
Thickness: 0.3mm
Width: 20mm
Thermal conductivity: 2.4W/mK
auf Bestellung 12 Stücke:
Lieferzeit 14-21 Tag (e)
| ART.AGT-297 |
Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.3mm; 2.4W/mK; glueless
Version: glueless
Type of tape: heat transfer
Length: 30mm
Thickness: 0.3mm
Width: 30mm
Thermal conductivity: 2.4W/mK
Tape application: facilitates heat transfer; heatsink mounting
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.3mm; 2.4W/mK; glueless
Version: glueless
Type of tape: heat transfer
Length: 30mm
Thickness: 0.3mm
Width: 30mm
Thermal conductivity: 2.4W/mK
Tape application: facilitates heat transfer; heatsink mounting
auf Bestellung 11 Stücke:
Lieferzeit 14-21 Tag (e)
| ART.AGT-298 |
Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 200mm; L: 400mm; Thk: 0.5mm; 1.5W/mK
Length: 0.4m
Type of tape: heat transfer
Version: glueless
Thickness: 0.5mm
Width: 200mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 200mm; L: 400mm; Thk: 0.5mm; 1.5W/mK
Length: 0.4m
Type of tape: heat transfer
Version: glueless
Thickness: 0.5mm
Width: 200mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| ART.AGT-299 |
Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.5mm; 1.5W/mK; glueless
Type of tape: heat transfer
Width: 20mm
Length: 0.13m
Thickness: 0.5mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.5mm; 1.5W/mK; glueless
Type of tape: heat transfer
Width: 20mm
Length: 0.13m
Thickness: 0.5mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
auf Bestellung 1 Stücke:
Lieferzeit 14-21 Tag (e)
| ART.AGT-300 |
Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.5mm; 1.5W/mK; glueless
Type of tape: heat transfer
Version: glueless
Length: 30mm
Thickness: 0.5mm
Width: 30mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.5mm; 1.5W/mK; glueless
Type of tape: heat transfer
Version: glueless
Length: 30mm
Thickness: 0.5mm
Width: 30mm
Thermal conductivity: 1.5W/mK
Tape application: facilitates heat transfer; heatsink mounting
auf Bestellung 48 Stücke:
Lieferzeit 14-21 Tag (e)
| ART.AGT-301 |
Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 200mm; L: 400mm; Thk: 0.5mm; 2.4W/mK
Length: 0.4m
Type of tape: heat transfer
Version: glueless
Thickness: 0.5mm
Width: 200mm
Thermal conductivity: 2.4W/mK
Tape application: facilitates heat transfer; heatsink mounting
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 200mm; L: 400mm; Thk: 0.5mm; 2.4W/mK
Length: 0.4m
Type of tape: heat transfer
Version: glueless
Thickness: 0.5mm
Width: 200mm
Thermal conductivity: 2.4W/mK
Tape application: facilitates heat transfer; heatsink mounting
auf Bestellung 3 Stücke:
Lieferzeit 14-21 Tag (e)
| ART.AGT-302 |
Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.5mm; 2.4W/mK; glueless
Type of tape: heat transfer
Width: 20mm
Length: 0.13m
Thickness: 0.5mm
Thermal conductivity: 2.4W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.5mm; 2.4W/mK; glueless
Type of tape: heat transfer
Width: 20mm
Length: 0.13m
Thickness: 0.5mm
Thermal conductivity: 2.4W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
auf Bestellung 21 Stücke:
Lieferzeit 14-21 Tag (e)
| ART.AGT-303 |
Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.5mm; 2.4W/mK
Version: double-sided; glueless
Type of tape: heat transfer
Length: 30mm
Thickness: 0.5mm
Width: 30mm
Thermal conductivity: 2.4W/mK
Tape application: facilitates heat transfer; heatsink mounting
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.5mm; 2.4W/mK
Version: double-sided; glueless
Type of tape: heat transfer
Length: 30mm
Thickness: 0.5mm
Width: 30mm
Thermal conductivity: 2.4W/mK
Tape application: facilitates heat transfer; heatsink mounting
auf Bestellung 100 Stücke:
Lieferzeit 14-21 Tag (e)
| ART.AGT-305 |
Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.5mm; 6W/mK; glueless
Type of tape: heat transfer
Width: 20mm
Length: 0.13m
Thickness: 0.5mm
Thermal conductivity: 6W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 20mm; L: 130mm; Thk: 0.5mm; 6W/mK; glueless
Type of tape: heat transfer
Width: 20mm
Length: 0.13m
Thickness: 0.5mm
Thermal conductivity: 6W/mK
Tape application: facilitates heat transfer; heatsink mounting
Version: glueless
auf Bestellung 143 Stücke:
Lieferzeit 14-21 Tag (e)
| ART.AGT-306 |
Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.5mm; 6W/mK; glueless
Type of tape: heat transfer
Version: glueless
Length: 30mm
Thickness: 0.5mm
Width: 30mm
Thermal conductivity: 6W/mK
Tape application: facilitates heat transfer; heatsink mounting
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 30mm; L: 30mm; Thk: 0.5mm; 6W/mK; glueless
Type of tape: heat transfer
Version: glueless
Length: 30mm
Thickness: 0.5mm
Width: 30mm
Thermal conductivity: 6W/mK
Tape application: facilitates heat transfer; heatsink mounting
auf Bestellung 32 Stücke:
Lieferzeit 14-21 Tag (e)
| ART.AGT-307 |
Hersteller: AG TERMOPASTY
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 200mm; L: 400mm; Thk: 0.5mm; 6W/mK; glueless
Length: 0.4m
Type of tape: heat transfer
Version: glueless
Thickness: 0.5mm
Width: 200mm
Thermal conductivity: 6W/mK
Tape application: facilitates heat transfer; heatsink mounting
Category: Thermoconductive tapes
Description: Tape: heat transfer; W: 200mm; L: 400mm; Thk: 0.5mm; 6W/mK; glueless
Length: 0.4m
Type of tape: heat transfer
Version: glueless
Thickness: 0.5mm
Width: 200mm
Thermal conductivity: 6W/mK
Tape application: facilitates heat transfer; heatsink mounting
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| ART.AGT-308 |
![]() |
Hersteller: AG TERMOPASTY
Category: Lubricants
Description: Oil; colourless; liquid; plastic container; SHREDDERS OIL; 250ml
Type of agent: oil
Colour: colourless
Appearance: liquid
Kind of package: plastic container
Name: SHREDDERS OIL
Capacity: 0.25l
Agent application: shredders
Application: lubrication; mechanical parts
Category: Lubricants
Description: Oil; colourless; liquid; plastic container; SHREDDERS OIL; 250ml
Type of agent: oil
Colour: colourless
Appearance: liquid
Kind of package: plastic container
Name: SHREDDERS OIL
Capacity: 0.25l
Agent application: shredders
Application: lubrication; mechanical parts
auf Bestellung 13 Stücke:
Lieferzeit 14-21 Tag (e)
| ART.AGT-309 |
![]() |
Hersteller: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; white; silicon based,do not conduct; 800g
Type of agent: heat transfer paste
Colour: white
Agent features: do not conduct; silicon based
Appearance: paste
Name: PASTA SILIKONOWA H2
Operating temperature: -50...250°C
Thermal conductivity: 0.88W/mK
Kind of package: cartridge
Agent application: electronic equipment; heatsinks; Household equipment
Application: facilitates heat transfer
Dielectric constant: 4.7
Signal word: Warning
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Net weight: 0.8kg
GHS Code: GHS09
Flash point: 350°C
Density: 2.7g/cm3 @ 20°C
Category: Heat conductive compounds
Description: Heat transfer paste; white; silicon based,do not conduct; 800g
Type of agent: heat transfer paste
Colour: white
Agent features: do not conduct; silicon based
Appearance: paste
Name: PASTA SILIKONOWA H2
Operating temperature: -50...250°C
Thermal conductivity: 0.88W/mK
Kind of package: cartridge
Agent application: electronic equipment; heatsinks; Household equipment
Application: facilitates heat transfer
Dielectric constant: 4.7
Signal word: Warning
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Net weight: 0.8kg
GHS Code: GHS09
Flash point: 350°C
Density: 2.7g/cm3 @ 20°C
auf Bestellung 8 Stücke:
Lieferzeit 14-21 Tag (e)
| ART.AGT-311 |
![]() |
Hersteller: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; white; silicon based,do not conduct; 400g
Type of agent: heat transfer paste
Colour: white
Agent features: do not conduct; silicon based
Appearance: paste
Name: PASTA SILIKONOWA H3
Operating temperature: -50...250°C
Thermal conductivity: 0.88W/mK
Kind of package: cartridge
Agent application: heatsinks
Application: facilitates heat transfer
Dielectric constant: 4.7
Signal word: Warning
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Net weight: 400g
GHS Code: GHS09
Flash point: 350°C
Density: 1.37g/cm3 @ 20°C
Category: Heat conductive compounds
Description: Heat transfer paste; white; silicon based,do not conduct; 400g
Type of agent: heat transfer paste
Colour: white
Agent features: do not conduct; silicon based
Appearance: paste
Name: PASTA SILIKONOWA H3
Operating temperature: -50...250°C
Thermal conductivity: 0.88W/mK
Kind of package: cartridge
Agent application: heatsinks
Application: facilitates heat transfer
Dielectric constant: 4.7
Signal word: Warning
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Net weight: 400g
GHS Code: GHS09
Flash point: 350°C
Density: 1.37g/cm3 @ 20°C
auf Bestellung 11 Stücke:
Lieferzeit 14-21 Tag (e)
| ART.AGT-314 |
![]() |
Hersteller: AG TERMOPASTY
Category: Encapsulating materials
Description: Silicone; liquid,encapsulating compound; white; -50÷180°C; <22TΩ
Operating temperature: -50...180°C
Mix ratio: 1:1
Surface resistance: <22TΩ
Type of agent: silicone
Agent features: condensation cure; two-component
Density: 1.2g/cm3
Net weight: 1kg
Thermal conductivity: 1.5W/mK
Bonding time: 70min
Appearance: encapsulating compound; liquid
Application: sealing and encapsulation of electronic circuits
Shore hardness: 20
Dielectric strength: 14.4kV/mm
Colour: white
Category: Encapsulating materials
Description: Silicone; liquid,encapsulating compound; white; -50÷180°C; <22TΩ
Operating temperature: -50...180°C
Mix ratio: 1:1
Surface resistance: <22TΩ
Type of agent: silicone
Agent features: condensation cure; two-component
Density: 1.2g/cm3
Net weight: 1kg
Thermal conductivity: 1.5W/mK
Bonding time: 70min
Appearance: encapsulating compound; liquid
Application: sealing and encapsulation of electronic circuits
Shore hardness: 20
Dielectric strength: 14.4kV/mm
Colour: white
auf Bestellung 1 Stücke:
Lieferzeit 14-21 Tag (e)
| ART.AGT-315 |
![]() |
Hersteller: AG TERMOPASTY
Category: Encapsulating materials
Description: Silicone; liquid,encapsulating compound; transparent; 50÷180°C
Type of agent: silicone
Appearance: encapsulating compound; liquid
Colour: transparent
Application: sealing and encapsulation of electronic circuits
Shore hardness: 12
Operating temperature: 50...180°C
Density: 980mg/cm3
Dielectric strength: 11kV/mm
Mix ratio: 3:2
Bonding time: 60min
Surface resistance: <480TΩ
Agent features: condensation cure; two-component
Net weight: 0.1kg
Category: Encapsulating materials
Description: Silicone; liquid,encapsulating compound; transparent; 50÷180°C
Type of agent: silicone
Appearance: encapsulating compound; liquid
Colour: transparent
Application: sealing and encapsulation of electronic circuits
Shore hardness: 12
Operating temperature: 50...180°C
Density: 980mg/cm3
Dielectric strength: 11kV/mm
Mix ratio: 3:2
Bonding time: 60min
Surface resistance: <480TΩ
Agent features: condensation cure; two-component
Net weight: 0.1kg
auf Bestellung 17 Stücke:
Lieferzeit 14-21 Tag (e)
| ART.AGT-316 |
![]() |
Hersteller: AG TERMOPASTY
Category: Encapsulating materials
Description: Silicone; liquid,encapsulating compound; transparent; 50÷180°C
Appearance: encapsulating compound; liquid
Colour: transparent
Operating temperature: 50...180°C
Net weight: 1kg
Surface resistance: <480TΩ
Type of agent: silicone
Agent features: condensation cure; two-component
Density: 980mg/cm3
Bonding time: 60min
Application: sealing and encapsulation of electronic circuits
Shore hardness: 12
Dielectric strength: 11kV/mm
Mix ratio: 3:2
Category: Encapsulating materials
Description: Silicone; liquid,encapsulating compound; transparent; 50÷180°C
Appearance: encapsulating compound; liquid
Colour: transparent
Operating temperature: 50...180°C
Net weight: 1kg
Surface resistance: <480TΩ
Type of agent: silicone
Agent features: condensation cure; two-component
Density: 980mg/cm3
Bonding time: 60min
Application: sealing and encapsulation of electronic circuits
Shore hardness: 12
Dielectric strength: 11kV/mm
Mix ratio: 3:2
auf Bestellung 8 Stücke:
Lieferzeit 14-21 Tag (e)
| ART.AGT-317 |
![]() |
Hersteller: AG TERMOPASTY
Category: Encapsulating materials
Description: Silicone; liquid,encapsulating compound; white; -50÷180°C; <22TΩ
Type of agent: silicone
Appearance: encapsulating compound; liquid
Colour: white
Application: sealing and encapsulation of electronic circuits
Shore hardness: 20
Operating temperature: -50...180°C
Thermal conductivity: 1.5W/mK
Density: 1.2g/cm3
Dielectric strength: 14.4kV/mm
Mix ratio: 1:1
Bonding time: 70min
Surface resistance: <22TΩ
Agent features: condensation cure; two-component
Net weight: 0.1kg
Category: Encapsulating materials
Description: Silicone; liquid,encapsulating compound; white; -50÷180°C; <22TΩ
Type of agent: silicone
Appearance: encapsulating compound; liquid
Colour: white
Application: sealing and encapsulation of electronic circuits
Shore hardness: 20
Operating temperature: -50...180°C
Thermal conductivity: 1.5W/mK
Density: 1.2g/cm3
Dielectric strength: 14.4kV/mm
Mix ratio: 1:1
Bonding time: 70min
Surface resistance: <22TΩ
Agent features: condensation cure; two-component
Net weight: 0.1kg
auf Bestellung 17 Stücke:
Lieferzeit 14-21 Tag (e)
| ART.AGT-318 |
![]() |
Hersteller: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; white; silicon based,do not conduct; 5kg
Type of agent: heat transfer paste
Colour: white
Agent features: do not conduct; silicon based
Appearance: paste
Name: PASTA SILIKONOWA H2
Operating temperature: -50...250°C
Thermal conductivity: 0.88W/mK
Kind of package: bucket
Agent application: electronic equipment; heatsinks; Household equipment
Application: facilitates heat transfer
Dielectric constant: 4.7
Signal word: Warning
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Net weight: 5kg
GHS Code: GHS09
Flash point: 350°C
Density: 2.7g/cm3 @ 20°C
Category: Heat conductive compounds
Description: Heat transfer paste; white; silicon based,do not conduct; 5kg
Type of agent: heat transfer paste
Colour: white
Agent features: do not conduct; silicon based
Appearance: paste
Name: PASTA SILIKONOWA H2
Operating temperature: -50...250°C
Thermal conductivity: 0.88W/mK
Kind of package: bucket
Agent application: electronic equipment; heatsinks; Household equipment
Application: facilitates heat transfer
Dielectric constant: 4.7
Signal word: Warning
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Net weight: 5kg
GHS Code: GHS09
Flash point: 350°C
Density: 2.7g/cm3 @ 20°C
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| ART.AGT-323 |
![]() |
Hersteller: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin-free; Water Soluble; liquid; bottle; 0.05l; Flux: SW13
Applications of soldering equipment: nichrome alloy soldering; steel soldering (also acid-proof steel)
Soldering equipment features: corrosive
Kind of flux: Water Soluble
Signal word: Danger
Flux residues: corrosive; yes
Hazard statements: H302: Harmful if swallowed.; H314: Causes severe skin burns and eye damage.; H317: May cause an allergic skin reaction.; H335: May cause respiratory irritation.; H412: Harmful to aquatic life with long lasting effects.
GHS Code: GHS05; GHS07
Type of flux: rosin-free
Capacity: 50ml
Density: 1.27g/cm3 @ 20°C
Kind of package: bottle
Solids content: 10%
Appearance: liquid
Conform to the norm: PN EN 29454
Manufacturer series: TS-81
Standard equipment: fine brush
Precautionary statements: P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.
Related items: ZD-171
Flux name: SW13
Category: Fluxes
Description: Flux: rosin-free; Water Soluble; liquid; bottle; 0.05l; Flux: SW13
Applications of soldering equipment: nichrome alloy soldering; steel soldering (also acid-proof steel)
Soldering equipment features: corrosive
Kind of flux: Water Soluble
Signal word: Danger
Flux residues: corrosive; yes
Hazard statements: H302: Harmful if swallowed.; H314: Causes severe skin burns and eye damage.; H317: May cause an allergic skin reaction.; H335: May cause respiratory irritation.; H412: Harmful to aquatic life with long lasting effects.
GHS Code: GHS05; GHS07
Type of flux: rosin-free
Capacity: 50ml
Density: 1.27g/cm3 @ 20°C
Kind of package: bottle
Solids content: 10%
Appearance: liquid
Conform to the norm: PN EN 29454
Manufacturer series: TS-81
Standard equipment: fine brush
Precautionary statements: P260: Do not breathe dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.
Related items: ZD-171
Flux name: SW13
auf Bestellung 1 Stücke:
Lieferzeit 14-21 Tag (e)
| ART.AGT-324 |
![]() |
Hersteller: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; grey; CARBON; 15.2W/mK; 1g
Type of agent: heat transfer paste
Colour: grey
Appearance: paste
Name: CARBON
Operating temperature: -20...130°C
Thermal conductivity: 15.2W/mK
Kind of package: syringe
Agent application: heatsinks
Application: facilitates heat transfer
Hazard statements: H411: Toxic to aquatic life with long lasting effects
Precautionary statements: P273: Avoid release to the environment.; P391: Collect spillage.; P501: Dispose of contents/container to ...
Net weight: 1g
GHS Code: GHS09
Category: Heat conductive compounds
Description: Heat transfer paste; grey; CARBON; 15.2W/mK; 1g
Type of agent: heat transfer paste
Colour: grey
Appearance: paste
Name: CARBON
Operating temperature: -20...130°C
Thermal conductivity: 15.2W/mK
Kind of package: syringe
Agent application: heatsinks
Application: facilitates heat transfer
Hazard statements: H411: Toxic to aquatic life with long lasting effects
Precautionary statements: P273: Avoid release to the environment.; P391: Collect spillage.; P501: Dispose of contents/container to ...
Net weight: 1g
GHS Code: GHS09
auf Bestellung 54 Stücke:
Lieferzeit 14-21 Tag (e)
| ART.AGT-325 |
![]() |
Hersteller: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; grey; CARBON; 15.2W/mK; 3g
Type of agent: heat transfer paste
Colour: grey
Appearance: paste
Name: CARBON
Operating temperature: -20...130°C
Thermal conductivity: 15.2W/mK
Kind of package: syringe
Agent application: heatsinks
Application: facilitates heat transfer
Hazard statements: H411: Toxic to aquatic life with long lasting effects
Precautionary statements: P273: Avoid release to the environment.; P391: Collect spillage.; P501: Dispose of contents/container to ...
Net weight: 3g
GHS Code: GHS09
Category: Heat conductive compounds
Description: Heat transfer paste; grey; CARBON; 15.2W/mK; 3g
Type of agent: heat transfer paste
Colour: grey
Appearance: paste
Name: CARBON
Operating temperature: -20...130°C
Thermal conductivity: 15.2W/mK
Kind of package: syringe
Agent application: heatsinks
Application: facilitates heat transfer
Hazard statements: H411: Toxic to aquatic life with long lasting effects
Precautionary statements: P273: Avoid release to the environment.; P391: Collect spillage.; P501: Dispose of contents/container to ...
Net weight: 3g
GHS Code: GHS09
auf Bestellung 34 Stücke:
Lieferzeit 14-21 Tag (e)
| ART.AGT-326 |
![]() |
Hersteller: AG TERMOPASTY
Category: Materials for PCB production
Description: Agent: developer; blister,plastic container; Signal word: Danger
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P262: Do not get in eyes, on skin, or on clothing.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P406: Store in corrosive resistant/... container with a resistant inner liner.; P501: Dispose of contents/container to ...
Hazard statements: H290: May be corrosive to metals.; H314: Causes severe skin burns and eye damage.; H335: May cause respiratory irritation.
Type of agent: developer
Net weight: 110g
Kind of package: blister; plastic container
Agent application: for photoresists; PCBs
GHS Code: GHS05; GHS07
Signal word: Danger
Category: Materials for PCB production
Description: Agent: developer; blister,plastic container; Signal word: Danger
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P262: Do not get in eyes, on skin, or on clothing.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P301 + P330 + P331: IF SWALLOWED: rinse mouth. Do NOT induce vomiting; P303 + P361 + P353: IF ON SKIN (or hair): Remove/Take off immediately all contaminated clothing. Rinse skin with water/shower.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P406: Store in corrosive resistant/... container with a resistant inner liner.; P501: Dispose of contents/container to ...
Hazard statements: H290: May be corrosive to metals.; H314: Causes severe skin burns and eye damage.; H335: May cause respiratory irritation.
Type of agent: developer
Net weight: 110g
Kind of package: blister; plastic container
Agent application: for photoresists; PCBs
GHS Code: GHS05; GHS07
Signal word: Danger
auf Bestellung 49 Stücke:
Lieferzeit 14-21 Tag (e)
| ART.AGT-327 |
![]() |
Hersteller: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; silicon based; PASTA HP; 1.5W/mK; 500g
Type of agent: heat transfer paste
Agent features: silicon based
Appearance: paste
Name: PASTA HP
Operating temperature: -50...250°C
Thermal conductivity: 1.5W/mK
Kind of package: cartridge
Agent application: heatsinks
Application: facilitates heat transfer
Dielectric constant: 5
Signal word: Warning
Hazard statements: H411: Toxic to aquatic life with long lasting effects
Precautionary statements: P273: Avoid release to the environment.; P391: Collect spillage.; P501: Dispose of contents/container to ...
Net weight: 0.5kg
GHS Code: GHS09
Resistance to: temperature
Category: Heat conductive compounds
Description: Heat transfer paste; silicon based; PASTA HP; 1.5W/mK; 500g
Type of agent: heat transfer paste
Agent features: silicon based
Appearance: paste
Name: PASTA HP
Operating temperature: -50...250°C
Thermal conductivity: 1.5W/mK
Kind of package: cartridge
Agent application: heatsinks
Application: facilitates heat transfer
Dielectric constant: 5
Signal word: Warning
Hazard statements: H411: Toxic to aquatic life with long lasting effects
Precautionary statements: P273: Avoid release to the environment.; P391: Collect spillage.; P501: Dispose of contents/container to ...
Net weight: 0.5kg
GHS Code: GHS09
Resistance to: temperature
auf Bestellung 5 Stücke:
Lieferzeit 14-21 Tag (e)
| ART.AGT-328 |
![]() |
Hersteller: AG TERMOPASTY
Category: Heat conductive compounds
Description: Heat transfer paste; silicon based; PASTA HPX; 2.8W/mK; 500g
Type of agent: heat transfer paste
Agent features: silicon based
Appearance: paste
Name: PASTA HPX
Operating temperature: -50...250°C
Thermal conductivity: 2.8W/mK
Kind of package: cartridge
Agent application: heatsinks
Application: facilitates heat transfer
Dielectric constant: 5.1
Signal word: Warning
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Net weight: 0.5kg
GHS Code: GHS09
Resistance to: temperature
Category: Heat conductive compounds
Description: Heat transfer paste; silicon based; PASTA HPX; 2.8W/mK; 500g
Type of agent: heat transfer paste
Agent features: silicon based
Appearance: paste
Name: PASTA HPX
Operating temperature: -50...250°C
Thermal conductivity: 2.8W/mK
Kind of package: cartridge
Agent application: heatsinks
Application: facilitates heat transfer
Dielectric constant: 5.1
Signal word: Warning
Hazard statements: H410: Very toxic to aquatic life with long lasting effects.
Precautionary statements: P273: Avoid release to the environment.; P501: Dispose of contents/container to ...
Net weight: 0.5kg
GHS Code: GHS09
Resistance to: temperature
auf Bestellung 5 Stücke:
Lieferzeit 14-21 Tag (e)
| ART.AGT-334 |
![]() |
Hersteller: AG TERMOPASTY
Category: Fluxes
Description: Flux: rosin based; halide-free,RMA,ROL0; paste; can; amber; 80g
Type of flux: rosin based
Kind of flux: halide-free; RMA; ROL0
Appearance: paste
Kind of package: can
Applications of soldering equipment: soldering of galvanised and nickel plated elements
Soldering equipment features: can be washed down with alcohol based agents
Colour: amber
Operating temperature: 50...200°C
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H318: Causes serious eye damage
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.
GHS Code: GHS05; GHS07
Flux residues: non-corrosive; yes
Net weight: 80g
Category: Fluxes
Description: Flux: rosin based; halide-free,RMA,ROL0; paste; can; amber; 80g
Type of flux: rosin based
Kind of flux: halide-free; RMA; ROL0
Appearance: paste
Kind of package: can
Applications of soldering equipment: soldering of galvanised and nickel plated elements
Soldering equipment features: can be washed down with alcohol based agents
Colour: amber
Operating temperature: 50...200°C
Signal word: Danger
Hazard statements: H317: May cause an allergic skin reaction.; H318: Causes serious eye damage
Precautionary statements: P261: Avoid breathing dust/fume/gas/mist/vapours/spray.; P280: Wear protective gloves/protective clothing/eye protection/face protection.; P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.; P310: Immediately call a POISON CENTER or doctor/physician.; P333 + P313: If skin irritation or rash occurs: Get medical advice/attention.; P362 + P364: Take off contaminated clothing and wash it before reuse.
GHS Code: GHS05; GHS07
Flux residues: non-corrosive; yes
Net weight: 80g
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| B327-1kg ART.AGT-122 |
![]() |
Hersteller: AG TERMOPASTY
ART.AGT-122 AG Termopasty Sodium persulfate for etching copper and PCB circuits etching, Fine-Crystaline; 1kg; Bottle; CH B327.k01
ART.AGT-122 AG Termopasty Sodium persulfate for etching copper and PCB circuits etching, Fine-Crystaline; 1kg; Bottle; CH B327.k01
auf Bestellung 4 Stücke:
Lieferzeit 7-14 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 2+ | 47.08 EUR |
| B327-250g ART.AGT-090 |
Hersteller: AG TERMOPASTY
CH B327.250 Sodium persulfate for etching copper and PCB circuits etching, Fine-Crystaline; 250g; Bag; CH B327.250
CH B327.250 Sodium persulfate for etching copper and PCB circuits etching, Fine-Crystaline; 250g; Bag; CH B327.250
auf Bestellung 10 Stücke:
Lieferzeit 7-14 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 5+ | 18.48 EUR |
| B327-250g ART.AGT-090 |
Hersteller: AG TERMOPASTY
CH B327.250 Sodium persulfate for etching copper and PCB circuits etching, Fine-Crystaline; 250g; Bag; CH B327.250
CH B327.250 Sodium persulfate for etching copper and PCB circuits etching, Fine-Crystaline; 250g; Bag; CH B327.250
auf Bestellung 60 Stücke:
Lieferzeit 7-14 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 5+ | 18.48 EUR |
| B327-500g ART.AGT-091 |
Hersteller: AG TERMOPASTY
CH B327.500 Sodium persulfate for etching copper and PCB circuits etching, Fine-Crystaline; 500g; Bag; CH B327.500
CH B327.500 Sodium persulfate for etching copper and PCB circuits etching, Fine-Crystaline; 500g; Bag; CH B327.500
auf Bestellung 20 Stücke:
Lieferzeit 7-14 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 2+ | 27.43 EUR |
| B327-500g ART.AGT-091 |
Hersteller: AG TERMOPASTY
CH B327.500 Sodium persulfate for etching copper and PCB circuits etching, Fine-Crystaline; 500g; Bag; CH B327.500
CH B327.500 Sodium persulfate for etching copper and PCB circuits etching, Fine-Crystaline; 500g; Bag; CH B327.500
auf Bestellung 2 Stücke:
Lieferzeit 7-14 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 2+ | 27.43 EUR |
| Borax (Natriumtetraborat-Decahydrat) (agt-121) 500 г Produktcode: 116167
1
zu Favoriten hinzufügen
Lieblingsprodukt
|
Hersteller: AG TermoPasty
Lötgeräte, Lötmaterial > Lötflussmittel
Kategorie: Flussmittel
Beschreibung: Flussmittel zum Löten und Schweißen mit Messing- (Kupfer-Zink-)Loten. Löst Metalloxide auf und erleichtert die Verbindung des Lots mit dem Lötmaterial. Borax hat die Form eines feinkristallinen Pulvers ohne Fluoride.
Gewicht/Volumen/Menge: 500 г
Lötgeräte, Lötmaterial > Lötflussmittel
Kategorie: Flussmittel
Beschreibung: Flussmittel zum Löten und Schweißen mit Messing- (Kupfer-Zink-)Loten. Löst Metalloxide auf und erleichtert die Verbindung des Lots mit dem Lötmaterial. Borax hat die Form eines feinkristallinen Pulvers ohne Fluoride.
Gewicht/Volumen/Menge: 500 г
auf Bestellung: 6 St.
- 6 St. - Lieferzeit 21-28 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 1+ | 5.68 EUR |
| 10+ | 5.09 EUR |
| Butan do lutownic ART.AGT-266 |
![]() |
Hersteller: AG TERMOPASTY
ART.AGT-266 AG Termopasty Butane gas for gas soldering irons; 200ml; Aerosol; Can; CH BUTANE.200
ART.AGT-266 AG Termopasty Butane gas for gas soldering irons; 200ml; Aerosol; Can; CH BUTANE.200
auf Bestellung 6 Stücke:
Lieferzeit 7-14 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 3+ | 13.82 EUR |
| Kupferpaste 400ml Produktcode: 122872
zu Favoriten hinzufügen
Lieblingsprodukt
|
![]() |
Hersteller: AG Termopasty
Chemie > Sonstige Chemie
Beschreibung: Kupferpaste. Mehrzweckprodukt für den Einsatz unter schwierigsten Bedingungen und in einem weiten Temperaturbereich von -40°C bis 1100°C. Sorgt für hervorragende Schmierung, Schutz vor Abrieb, Korrosion und hohen Temperaturen.
Anwendung: Schmierung von Schrauben und Muttern, Rohrverbindungen usw.
Verpackung: 400 ml
Chemie > Sonstige Chemie
Beschreibung: Kupferpaste. Mehrzweckprodukt für den Einsatz unter schwierigsten Bedingungen und in einem weiten Temperaturbereich von -40°C bis 1100°C. Sorgt für hervorragende Schmierung, Schutz vor Abrieb, Korrosion und hohen Temperaturen.
Anwendung: Schmierung von Schrauben und Muttern, Rohrverbindungen usw.
Verpackung: 400 ml
verfügbar: 18 St.
- 18 St. - stock Köln
| Anzahl | Privatkunde |
|---|---|
| 1+ | 7.12 EUR |
| Easy Print Sn62Pb36Ag2 6g ART.AGT-023 |
![]() |
Hersteller: AG TERMOPASTY
CH PaLEP-008ag Solder paste for SMD komponents in the process does not include washing phase doesn't contain chlorides,flux residue doesn't corrode,doesn't require washing CH PaLEP-008ag
CH PaLEP-008ag Solder paste for SMD komponents in the process does not include washing phase doesn't contain chlorides,flux residue doesn't corrode,doesn't require washing CH PaLEP-008ag
auf Bestellung 12 Stücke:
Lieferzeit 7-14 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 5+ | 21.07 EUR |
| Easy Print Sn96,5Ag3Cu0.5 6g ART.AGT-028 |
Hersteller: AG TERMOPASTY
CH PaLEP-008cu Solder paste for SMD komponents in the process does not include washing phase contains a rosin-based flux, very good mechanical properties and electrical CH PaLEP-008cu
CH PaLEP-008cu Solder paste for SMD komponents in the process does not include washing phase contains a rosin-based flux, very good mechanical properties and electrical CH PaLEP-008cu
auf Bestellung 13 Stücke:
Lieferzeit 7-14 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 5+ | 19.59 EUR |
| ESAC305/20 Produktcode: 62034
zu Favoriten hinzufügen
Lieblingsprodukt
|
![]() |
Hersteller: AG TermoPasty
Lötgeräte, Lötmaterial > Lote, Lötpasten
Kategorie: Lötpaste
Beschreibung: Zum Weichlöten, Paste
Gewicht/Volumen/Menge: 5 ml
Lötgeräte, Lötmaterial > Lote, Lötpasten
Kategorie: Lötpaste
Beschreibung: Zum Weichlöten, Paste
Gewicht/Volumen/Menge: 5 ml
Produkt ist nicht verfügbar
| Anzahl | Privatkunde |
|---|---|
| 1+ | 14.34 EUR |
| 10+ | 9.44 EUR |
| ESAC305/20 abgelaufen Produktcode: 104182
zu Favoriten hinzufügen
Lieblingsprodukt
|
Hersteller: AG TermoPasty
Lötgeräte, Lötmaterial > Lote, Lötpasten
Kategorie: Lötpaste
Beschreibung: Zum Weichlöten, Paste
Gewicht/Volumen/Menge: 5 ml
Lötgeräte, Lötmaterial > Lote, Lötpasten
Kategorie: Lötpaste
Beschreibung: Zum Weichlöten, Paste
Gewicht/Volumen/Menge: 5 ml
Produkt ist nicht verfügbar
| Anzahl | Privatkunde |
|---|---|
| 1+ | 4.78 EUR |
| ESAC305/8 Lötpaste 217°C 96,5Sn/3Ag/0,5Cu (ART.AGT-028) Produktcode: 35855
5
zu Favoriten hinzufügen
Lieblingsprodukt
|
Hersteller: AG TermoPasty
Lötgeräte, Lötmaterial > Lote, Lötpasten
Kategorie: Lötpaste
Beschreibung: Lötpaste; Sn96.5Ag3Cu0.5; Paste; Spritze; 8g; 2.5ml; Flussmittel: No Clean; 15%
Gewicht/Volumen/Menge: 8 g
Legierungszusammensetzung: Sn96,5Ag3Cu0,5
Schmelzpunkt: 217°С
Lottyp: Bleifrei
Lötgeräte, Lötmaterial > Lote, Lötpasten
Kategorie: Lötpaste
Beschreibung: Lötpaste; Sn96.5Ag3Cu0.5; Paste; Spritze; 8g; 2.5ml; Flussmittel: No Clean; 15%
Gewicht/Volumen/Menge: 8 g
Legierungszusammensetzung: Sn96,5Ag3Cu0,5
Schmelzpunkt: 217°С
Lottyp: Bleifrei
erwartet: 30 St.
- 30 St. - erwartet 28.12.2026
auf Bestellung: 11 St.
- 11 St. - Lieferzeit 21-28 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 1+ | 10.38 EUR |
| 10+ | 9.76 EUR |
| ESAC305/8 abgelaufen, Haltbarkeit abgelaufen Produktcode: 104194
zu Favoriten hinzufügen
Lieblingsprodukt
|
Produkt ist nicht verfügbar
| Anzahl | Privatkunde |
|---|---|
| 1+ | 2.37 EUR |
| ESN62PB36AG/20 Produktcode: 62035
zu Favoriten hinzufügen
Lieblingsprodukt
|
![]() |
Hersteller: AG TermoPasty
Lötgeräte, Lötmaterial > Lote, Lötpasten
Kategorie: Lötpaste
Beschreibung: Zum Weichlöten, Paste
Gewicht/Volumen/Menge: 5 ml
Lötgeräte, Lötmaterial > Lote, Lötpasten
Kategorie: Lötpaste
Beschreibung: Zum Weichlöten, Paste
Gewicht/Volumen/Menge: 5 ml
Produkt ist nicht verfügbar
| Anzahl | Privatkunde |
|---|---|
| 1+ | 11.01 EUR |
| ESN62PB36AG/20 abgelaufen Produktcode: 104185
zu Favoriten hinzufügen
Lieblingsprodukt
|
Hersteller: AG TermoPasty
Lötgeräte, Lötmaterial > Lote, Lötpasten
Kategorie: Lötpaste
Beschreibung: Zum Weichlöten, Paste
Gewicht/Volumen/Menge: 5 ml
Lötgeräte, Lötmaterial > Lote, Lötpasten
Kategorie: Lötpaste
Beschreibung: Zum Weichlöten, Paste
Gewicht/Volumen/Menge: 5 ml
Produkt ist nicht verfügbar
| Anzahl | Privatkunde |
|---|---|
| 1+ | 6.46 EUR |
| ESN62PB36AG/250 Produktcode: 73002
zu Favoriten hinzufügen
Lieblingsprodukt
|
Hersteller: AG TermoPasty
Lötgeräte, Lötmaterial > Lote, Lötpasten
Kategorie: Lötpaste
Beschreibung: Zum Weichlöten, Paste
Lötgeräte, Lötmaterial > Lote, Lötpasten
Kategorie: Lötpaste
Beschreibung: Zum Weichlöten, Paste
Produkt ist nicht verfügbar
Im Einkaufswagen
Stück im Wert von UAH
| ESN62PB36AG/40 Produktcode: 73701
zu Favoriten hinzufügen
Lieblingsprodukt
|
Hersteller: AG TermoPasty
Lötgeräte, Lötmaterial > Lote, Lötpasten
Kategorie: Lötpaste
Beschreibung: Zum Weichlöten, Paste
Lötgeräte, Lötmaterial > Lote, Lötpasten
Kategorie: Lötpaste
Beschreibung: Zum Weichlöten, Paste
Produkt ist nicht verfügbar
| Anzahl | Privatkunde |
|---|---|
| 1+ | 14.68 EUR |
| ESN62PB36AG/40 abgelaufen Produktcode: 104188
zu Favoriten hinzufügen
Lieblingsprodukt
|
Hersteller: AG TermoPasty
Lötgeräte, Lötmaterial > Lote, Lötpasten
Kategorie: Lötpaste
Beschreibung: Zum Weichlöten, Paste
Lötgeräte, Lötmaterial > Lote, Lötpasten
Kategorie: Lötpaste
Beschreibung: Zum Weichlöten, Paste
Produkt ist nicht verfügbar
| Anzahl | Privatkunde |
|---|---|
| 1+ | 6.46 EUR |
| ESN62PB36AG/8 Lötpaste 179 ° C 62Sn/36Pb/2Ag (ART.AGT-023) Produktcode: 35856
8
zu Favoriten hinzufügen
Lieblingsprodukt
|
Hersteller: AG TermoPasty
Lötgeräte, Lötmaterial > Lote, Lötpasten
Kategorie: Lötpaste
Beschreibung: Lot; Sn62Pb36Ag2; Paste; Spritze; 8g; 2.5ml; Flussmittel: No Clean; 15%
Gewicht/Volumen/Menge: 8 g
Legierungszusammensetzung: Sn62Pb36Ag2
Schmelzpunkt: 179°С
Lottyp: Bleihaltig
Lötgeräte, Lötmaterial > Lote, Lötpasten
Kategorie: Lötpaste
Beschreibung: Lot; Sn62Pb36Ag2; Paste; Spritze; 8g; 2.5ml; Flussmittel: No Clean; 15%
Gewicht/Volumen/Menge: 8 g
Legierungszusammensetzung: Sn62Pb36Ag2
Schmelzpunkt: 179°С
Lottyp: Bleihaltig
auf Bestellung: 48 St.
- 48 St. - Lieferzeit 21-28 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 1+ | 10.38 EUR |
| 10+ | 9.76 EUR |
| ESN62PB36AG/8 abgelaufen, Haltbarkeit abgelaufen Produktcode: 104195
zu Favoriten hinzufügen
Lieblingsprodukt
|
Hersteller: AG TermoPasty
Lötgeräte, Lötmaterial > Lote, Lötpasten
Kategorie: Lot mit Silber
Beschreibung: Lot; Sn62Pb36Ag2; Paste; Spritze; 8g; 2.5ml; Flussmittel: No Clean; 15%
Gewicht/Volumen/Menge: 8 g
Legierungszusammensetzung: Sn62Pb36Ag2
Lottyp: Bleihaltig
Lötgeräte, Lötmaterial > Lote, Lötpasten
Kategorie: Lot mit Silber
Beschreibung: Lot; Sn62Pb36Ag2; Paste; Spritze; 8g; 2.5ml; Flussmittel: No Clean; 15%
Gewicht/Volumen/Menge: 8 g
Legierungszusammensetzung: Sn62Pb36Ag2
Lottyp: Bleihaltig
Produkt ist nicht verfügbar
| Anzahl | Privatkunde |
|---|---|
| 1+ | 2.18 EUR |
| Flux AG5 100 мл Produktcode: 122881
zu Favoriten hinzufügen
Lieblingsprodukt
|
![]() |
Hersteller: AG Termopasty
Lötgeräte, Lötmaterial > Lötflussmittel
Kategorie: Flussmittel
Beschreibung: Hochtemperatur-Verzinnen, Löten von mit Polyurethanlacken beschichteten Teilen, Löten von versilberten und verzinnten Teilen
Gewicht/Volumen/Menge: 100 мл
Lötgeräte, Lötmaterial > Lötflussmittel
Kategorie: Flussmittel
Beschreibung: Hochtemperatur-Verzinnen, Löten von mit Polyurethanlacken beschichteten Teilen, Löten von versilberten und verzinnten Teilen
Gewicht/Volumen/Menge: 100 мл
Produkt ist nicht verfügbar
| Anzahl | Privatkunde |
|---|---|
| 1+ | 8.15 EUR |
| Flussmittel AG 5 Produktcode: 128512
4
zu Favoriten hinzufügen
Lieblingsprodukt
|
Hersteller: AG Termopasty
Lötgeräte, Lötmaterial > Lötflussmittel
Kategorie: Mittelaktives Flussmittel
Beschreibung: Flüssiges, kolophoniumfreies, mittelaktives Flussmittel vom Typ 2.2.3 A gemäß ISO 9454-1, eine alkoholische Lösung organischer Verbindungen. Bestimmt für das Hochtemperatur-Verzinnen (300-400 °C) und Löten von Elementen mit Polyurethan-Lackbeschichtungen sowie zum Löten versilberter und verzinnter Elemente.
Gewicht/Volumen/Menge: 100 мл
Konsistenz: Flüssig
Lötgeräte, Lötmaterial > Lötflussmittel
Kategorie: Mittelaktives Flussmittel
Beschreibung: Flüssiges, kolophoniumfreies, mittelaktives Flussmittel vom Typ 2.2.3 A gemäß ISO 9454-1, eine alkoholische Lösung organischer Verbindungen. Bestimmt für das Hochtemperatur-Verzinnen (300-400 °C) und Löten von Elementen mit Polyurethan-Lackbeschichtungen sowie zum Löten versilberter und verzinnter Elemente.
Gewicht/Volumen/Menge: 100 мл
Konsistenz: Flüssig
verfügbar: 9 St.
- 9 St. - stock Köln
auf Bestellung: 21 St.
- 21 St. - Lieferzeit 21-28 Tag (e)
| Anzahl | Privatkunde |
|---|---|
| 1+ | 8.43 EUR |
| 10+ | 7.76 EUR |






























































